Тёмный
No video :(

"EASY DIY: How I Replaced The Power Steering Hose On My Honda Odyssey!" 

DIY Manual
Подписаться 7 тыс.
Просмотров 7 тыс.
50% 1

Replacing your own power steering hose can save you hundreds.
Below are the Amazon Affiliate Links to the Product items you will need to do this job.
1. Power Steering Hose: amzn.to/3m88ycd
2. Deep Socket Wrench Set: amzn.to/3zxXrfR
3. 14 Flare Nut Wrench: amzn.to/3MgkVh2
4. 17 mm Wrench: amzn.to/3KIyQLT
Power Steering Quick Fix: • Power Steering Hose Le...
RU-vid Channel: / @diymanual
This is a detailed video on how I replaced the high pressure power steering hose on my Honda Odyssey 2007 EX. After 176,000 miles the pressure line hose started to leak not on the connectors but on the upper part of the hose. I did an emergency fix by wrapping it with a silicone tape. The tape last about 3 weeks and I have to remove and re-apply again. I was able to do this a few times until the bottom part of the hose started leaking as well so I decided it is time for me to replace it.
Replacing the hose is considered medium difficulty level especially if you are not comfortable working under the car. You will need a 10mm to remove the screws from the top of the hose as well as the brackets, 14mm deep socket to remove the line from the steering box and a 14mm flare nut to install it back. I tried removing the line from the steering using the 14mm flare nut but I gave up on it after about 20 minutes of trying. You might be able to do it if you have a 6-8 extension. I was initially using a 5 inch extension and then I tried a 10 inch but both put me in an awkward position. If you cut the line and use a 14mm deep socket, it will take you 10 seconds to remove it.
Installing it back is a little tricky because the end that goes into the steering box will need to be perfectly straight so you avoid crossing the threads. You will need to first install the brackets as this will help you guide the end of the hose to the box. On the top, you will need to install the end to the pump first before securing the top bracket.
If you found this video helpful to you, please help my channel by clicking the like and the subscribe button and leave a comment below.
You can also check my merchandise if you want to treat yourself with a DIY'er shirt.
Thank You for Watching!

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 17   
@diymanual
@diymanual 10 месяцев назад
👍 If you found these DIY tips helpful, make sure to smash that "LIKE" button and "SUBSCRIBE" for a steady stream of DIY knowledge! Stay empowered to tackle any project around your home, car, technology, or pool with confidence. Let's get hands-on and make life easier together! 🏡🚗🏊‍♂ #DIYLife #SubscribeForMoreDIYTips
@davidsutherland6224
@davidsutherland6224 7 месяцев назад
You’re the first person I’ve seen that had the idea of worrying the pipe off the bottom bolt. That makes a ton of sense and has to make it so much easier.
@diymanual
@diymanual 7 месяцев назад
Thank you so much for your kind words! I'm glad you found my idea helpful. It's always great to hear that my tips and tricks make a difference for fellow DIY enthusiasts like you.
@hypefxx9011
@hypefxx9011 5 месяцев назад
Best video so far with great camera angles in the engine. Good job
@diymanual
@diymanual 5 месяцев назад
Thank you so much for the kind words! I'm glad you enjoyed the video.
@MrBillybathgate5
@MrBillybathgate5 4 месяца назад
Thanks brother …. Just did this job yesterday …. It’s super easy with a flare nut crows foots 14
@diymanual
@diymanual 4 месяца назад
That's awesome to hear! Glad it went smoothly for you.
@jbfontz2898
@jbfontz2898 11 месяцев назад
Nice pressure hose removal 😊
@diymanual
@diymanual 11 месяцев назад
Easy way to do it since it will be replaced anyway.
@stevenshi8461
@stevenshi8461 Год назад
Great video, very detailed. Thanks!
@diymanual
@diymanual Год назад
Thank You.
@Elniniss
@Elniniss 7 месяцев назад
You can use a ratcheting flare nut wrench. It makes it way easier.
@diymanual
@diymanual 7 месяцев назад
Thank you so much for sharing this tip! I always appreciate learning new tools and techniques that can make my work easier. Can't wait to try it out!
@solkinar
@solkinar 4 дня назад
Every video shows someone using a crowfoot wrench for the bottom flare nut. Not sure why as I used an open ended wrench from up top.
@diymanual
@diymanual 4 дня назад
@@solkinar The nut is very tight at the bottom plus the awkward position can cause the wrench to slip.
@solkinar
@solkinar 4 дня назад
I sprayed it with liquid wrench. Let sit for 10 mins. Used my 9/16 open end wrench because it's longer than my 14mm. Able to get squarely on the flare nut. No slippage, no busted knuckles. Maybe it helps that I've been turning wrenches for over 30 years but this job is fairly basic.
@diymanual
@diymanual 4 дня назад
@@solkinar Cool. Thanks for sharing your technique.
Далее
Simple Flower Syrup @SpicyMoustache
00:32
Просмотров 2 млн
Power Steering Hose Replacement 2002 Honda Odyssey
23:05
Fix Power Steering Fluid Leak in Honda Odyssey
14:40
Просмотров 3,4 тыс.
How to Replace a Honda Power Steering Hose 3.5 V6
13:07