EASY DIY KLR 650 High Beam Activated Aux Lights! | Nilight 4" Cube LED Test

Подписаться 34 тыс.

Просмотров 7 тыс.

50% 1

Want to install some auxiliary LEDs on your KLR 650 but don't want to mess around with removing fairings or installing switches? Check this out!
Amazon Affiliate links
Nilight Lights: amzn.to/3XDFdmC
Nilight Brackets: amzn.to/3j1TYkL
Nilight Website Links
Nilight Lights: www.nilight.com/products/nili...
Nilight Brackets: www.nilight.com/collections/h...
Electrical Stuff
Heat Shrink Connectors (affiliate link): amzn.to/3xW3bPw
Heat Gun (affiliate link): amzn.to/3SxxNR9
Standard Crimp Tool (affiliate link): www.rockymountainatvmc.com/pa...
Wire Taps: amzn.to/46QBisK
Special Terminal Crimp Tool (affiliate link): amzn.to/3x6kQEM
Special Terminals: www.cycleterminal.com/mt-serie...
Terminals - 2.3mm - .090 Tin plated Male Terminal .5 - 1.3 mm (16-20 AWG) Japan - Sumitomo p/n 1500-0105
Seals - HM/MT Connector Wire seal 2.3mm - .090 Japan - Sumitomo p/n 7160-8234
Bullet Connections - Waterproof bullet connectors, male & female.
Links to my other gear & parts!
(If you click these and make a purchase on the sites I earn a small commission, which goes towards more videos like this!)
Crash Bars
Uppers: www.rockymountainatvmc.com/pa...
Lowers: www.rockymountainatvmc.com/pa...
ATV High Bend Bars: www.rockymountainatvmc.com/pa...
Fat Bar Risers: www.rockymountainatvmc.com/pa...
Lexx Pipe: www.rockymountainatvmc.com/pa...
Tusk Tank Bag: www.rockymountainatvmc.com/pa...
Tail Bag: www.rockymountainatvmc.com/pa...
Tires: www.rockymountainatvmc.com/ti...
Barkbusters: www.rockymountainatvmc.com/pa...
KLR Shift Lever: www.rockymountainatvmc.com/pa...
Drain Plug: www.rockymountainatvmc.com/pa...
Buy Me A Beer: paypal.me/SwankyCatBeerMoney
Patreon: / swankycat
T-Shirts & Sweatshirts: teespring.com/stores/swanky-c...
Stay Swanky My Friends

Авто/Мото

Опубликовано:

29 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@deltabravo1257 Год назад

4:10 Hey Ben, you need to heat those up until the sleeve disappears. That sleeve is a ring of solder. When it gets hot enough, it melts into the wire strands and "solders" the wires together. Since I can still see the ring (sleeve), it means they aren't properly soldering the wires together.

@BlazinBlades Год назад

Is there anyone on RU-vid land having more fun on their KLR than you dude? Way to go bro!!! 🍻🍻

@SwankyCatProductions Год назад

Haha thanks man!

@mattbarrois8675 Год назад

Nice I already have those exact lights glad you sent me the link to this video

@adamcook5433 Год назад

Your videos really got me on the KLR. Ill be picking up a new one in Lacrosse next week.

@SwankyCatProductions Год назад

Nice! Let me know how you like it!

@billcotton1551 Год назад

Riding a KLR on ice. What could possibly go wrong? The new lights are great.

@Grunt49 Год назад

Don't touch the front brake!

@hellraisingvtec 4 месяца назад

Great and helpful video. Thanks

@SwankyCatProductions 4 месяца назад

Glad to hear it. Thank you!

@dederonair Год назад

Those solder connectors looked pretty cool, never seen that before!

@SwankyCatProductions Год назад

They are! I've been using them a little more and figured out you just need to trim the wire down a bit more and you don't end up with the stray strands.

@mkramsauer Год назад

Another great video brother 👊 thank you for the updates and thorough explanation really appreciate your channel

@SwankyCatProductions Год назад

Thank you! Glad you find it helpful!

@mkramsauer Год назад

@@SwankyCatProductions heck yeah you were one of the first ones I started following and I've used a bunch of your ideas and or parts on my KLR

@abeiam1357 Год назад

@@SwankyCatProductions Do you prefer these lights or the other round ones you had installed prior?

@danreich4320 9 месяцев назад

Nice job

@SwankyCatProductions 3 месяца назад

Thanks!

@RADIOACTIVEMASCULINITY Год назад

I like that set up with the running lights and high beam. I may copy your idea 💪

@SwankyCatProductions Год назад

Thanks man, I love it!

@SkywalkerPMs 3 месяца назад

Im doing this!

@SwankyCatProductions 3 месяца назад

You'll be glad you did!

@ryanw6009 Год назад

Might do it to my versys x the lights are very bad at night!

@abeiam1357 Год назад

Man I’m really considering trying this but I’m not good when it comes to electronics. I feel like I would mess it up. Looks great though

@beefriprock8112 Год назад

Green wire, thank you!

@SwankyCatProductions Год назад

Yes sir!

@Bryanvcarbino Год назад

I might be wrong but the link you provided for the Posi-lock is for an in-line connecter. Not one that taps into a live wire that’s not cut

@SwankyCatProductions Год назад

Yep looks like it was wrong, thanks!

@dougmate2378 Год назад

Nice, the current Amazon lights I have for my KLR I'm not a fan at all. Those connections you have are butt ties. They are used a lot in aviation, really good connection

@SwankyCatProductions Год назад

Butt Ties?! Haha. They definitely seem to work every well, not to hard to install either.

@dougmate2378 Год назад

@@SwankyCatProductions No sir not at all. We usually chuckle when Avionics says the name haha. super easy to use., and very durable. Do you get credit for people buying those lights? Your review made me impulse buy lol thanks dude :) 🚁✈🏎🏍

@michiganmoto7687 Год назад

Those lights look amazing! But how night blind does it leave you when you have to put dims on?

@SwankyCatProductions Год назад

Haha yeah that is sort of a problem but it's not to bad and totally worth it.

@joshburns6873 25 дней назад

Hey man I hope this reaches you well, I used your links to purchase the lights and tools associated with installation for the klr 650 build you did, I wanted to ask if you tucked that entire long thick harness up in the fairing or if you cut and shortened it, as I said before I got the very same lights you did.

@SwankyCatProductions 24 дня назад

Nice! Thank you! I think I chopped a bit off the switch line, but left the entire mess of wires down by where the harness plugged into the bikes original wiring.

@joshburns6873 22 дня назад

@@SwankyCatProductions I did pretty much the same, got it all buttoned up last night, btw wanted to let you know you played a big part in my decision to buy this new klr, almost had it a month now and love it so far, first dual purpose bike.