EASY FOLLOW Rear DOOR latch HANDLE Replacement Toyota Sequoia √ Fix it Angel

Подписаться 203 тыс.

Просмотров 268 тыс.

50% 1

Repair Manuals: shrsl.com/3zwnv sovrn.co/amfaf3n Fix it Angel EBAY STORE: ebay.us/OE6UsK repair smith fxo.co/1284793/fixitangel THANK YOU ALL FOR WATCHING MY VIDEO. This video is NOT sponsored. If you would like to support this channel. These links are my affiliate links which means if you buy something I will receive a small commission. Thank you for your support. God Bless
www.amazon.com/shop/fixitangel www.getsomevegas.com/home
2001 2002 2003 2004 2005 2006 2007 Toyota Sequoia
Rear Liftgate door handle amzn.to/2VuVorp
tinyurl.com/yygnwx45
Clip Removal Tool goo.gl/kCdQxM
goo.gl/XFHCTt
Plastic Trim Removal Tool goo.gl/z5eci8
goo.gl/po5uW1
1/4 drive Flexhead Ratchet goo.gl/faW3zU
goo.gl/5Jz5B5
1/4” drive Metric Socket Set goo.gl/aAieme
goo.gl/oLV6RU
1/4" Drive Metric Deep Socket Set goo.gl/bhMT25
goo.gl/5BwZXc
Large Pick Set goo.gl/pfxygc
goo.gl/aQYKsq
ScrewDriver Set goo.gl/PA5G7x
goo.gl/dm3Zdx
Needle Nose Pliers: goo.gl/QxqHhN
goo.gl/8qv1bp
2002 Toyota Sequoia. Replacing the rear hatch handle.
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done. Samsung W200 pocket camcorder was used to do this video. please subscribe and thank you for watching.
Follow me on TWITTER: @88bmyvegas and
lasvegasautoinsider.blogspot.com/ DISCLAIMER - Due to factors beyond the control of FixitAngel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. FixitAngel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. FixitAngel recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of FixitAngel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not FixitAngel nor any of it’s subsidiaries. All links in the description are affiliate links. if you would like to support this channel. purchase any of the product links. i get a little commission from each purchase. thank you

Развлечения

Опубликовано:

29 май 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 199

@steamboatdad 9 лет назад

I like the no talking style. Pretty cool idea. Very efficient and it keeps you focused on the video. Thanks

@FixItAngel 9 лет назад

steamboatdad Thank you for the comment. I really appreciate it. Have a nice day and please subscribe.

@steamboatdad 9 лет назад

Uh oh! The new latch is in, but the door isn't opening. Could the cable be stretched?

@FixItAngel 9 лет назад

you might need to bend that little metal thing that you snap the cable on. it has too much play/space

@LeGeneful 8 лет назад

Thank you! I completed my tailgate repair and with the help of your video it was pretty simple. Thanks again.

@EGabalski 3 года назад

You just saved me $358.00. You are "The Man" Thank you so much.

@lawrencegardener8616 Месяц назад

This is the best video on how to do this. Thank you. Only thing is all you need is a 10 mm for socket. Roll rear window down an inch or two so that you can slide window assembly down a few inches to get to the two 10 mm nuts. Great video.

@SemperSaint 5 лет назад

I had been putting this task off for about 3 months, and finally broke down being tired of not being able to load stuff in the back. What should have taken 30 mins or less wound up taking 45 to a hour because I couldn't find a T-27 Torx bit to take my license plate off. It had nothing to do with the instructions which worked like a charm. Kicking myself for sitting on the brand new part, and not installing it sooner. Great job!

@FixItAngel 5 лет назад

Leo B Rochon Jr great job brother you did it. Have a great day

@andrewgancinia 9 лет назад

Best video I seen so far. Without breaking anything.

@FixItAngel 9 лет назад

Thank you!! Please subscribe.

@jr6786 7 лет назад

God bless you! You saved me a month of groceries with this well filmed easy to follow video.

@travel-peter 4 года назад

to the point, no bla bla bla... very good. thx

@valeriewiens6216 9 лет назад

This video saved me around $200! I was able to replace the latch myself and I'm a woman who has never worked on a car and drank two margaritas while doing this! I was able to follow the steps but I got pretty messed up trying to reverse the steps. Maybe a series of reverse photos at the end would help. And I'm sure less margaritas would have helped. In then end, I did it! Thank you so much!

@FixItAngel 9 лет назад

+Valerie Wiens Awesome Valerie!! Maybe next time have only 1 margarita. LOL Couple years ago, I drank a 6 pack of beer while I was working on my truck and placed the fuel filter in the wrong direction. LOL Never again drinking while wrenching. lol Now you could use some of that $200 to buy more tools. I'm happy for you because you did it and you are a woman. Have a nice day and please subscribe. “Whether you think you can, or you think you can't--you're right.”--HENRY FORD

@baikalc.4260 3 года назад

i ll marry you . more women like you are necessary.

@ximeavila8096 3 года назад

can you help me with the name of the parts to buy it? thank you

@abibodlogistics 6 лет назад

I have watched lots of videos and truth be told this is about the best that I have seen on RU-vid,what he/she did that others did not do is that he/she focuses and zooms on the particular area that he is working on so it allows for a better understanding of what is been repaired.Thanks for the wonderful job and like somebody said there is no talking which of course causes distraction and if at all there is the need to talk,I think it should be minimal.

@john6839 7 лет назад

Extremely helpful video. Fixed my hatch and saved hundreds of dollar because of it. I was actually able to squeeze my hands behind the power window assembly so I didn't have to take it off. Really appreciate the vid.

@aventure1892 8 лет назад

Hey anyone out there looking to do this fix, make sure the latch you bought works well. The one I bought doesn't have enough flex to pull the cable, so still cannot open properly. My new latch's mechanism is not made to "exact" specs, so it's best to buy the more expensive one, other wise it's back to trying to jury rigging!! But for sure Angel has the best instruction!!

@1asphaltcowboy 7 лет назад

A Venture please say where you got most expensive one , I don't want to have to do this twice. Thanks in advance !!!!

@scrichdagr8 8 лет назад

great video for people like me that like to get to the point without a bunch of dialogue, just replaced a broken handle and latch. Thanks

@FixItAngel 8 лет назад

+scrichdagr8 Thank you and welcome. please share and subscribe.

@thegreatlakestrucker 3 года назад

Thank you for the video. Fixed my latch today.

@gottafly30 8 лет назад

Great Video! i watched about 1/2 dozen and yours is the best method. For you guys trying to do this yourself, follow this video and you'll have an easy time of it. one tip - before you start, drop the rear window about an inch. you need a philips screw driver and 10MM socket.

@FixItAngel 8 лет назад

+gottafly30 Thank you for the tip. Please subscribe. Have a nice day.

@drobousmc 9 лет назад

The superduper video on how to fix the stupid plastic hatch handle. The best out there on the Internet. Thank you so much for producing and posting this video. You saved me at least $400 today. Thank you!!

@FixItAngel 9 лет назад

drobousmc Welcome!! Thank you for the comments!! Please subscribe and have a nice day.

@edwardparkin9492 7 лет назад

Thank you! I would not have done this as error-free or as quickly without your help. The lowering of the rear window assembly was simple and key, and you saved the clips that secure the plate-holder by showing that step too! Thanks again man!

@CodeDoctorJet 6 лет назад

Just replaced mine today and this was the clearest video for me to follow. ¡THANK YOU! - I bent an aluminum tent stake into shape to make the tool to trigger the latch from outside. Cost me nothing, took about 2 minutes, and worked perfectly.

@notbrandechh 9 лет назад

Great video. Fixed my 2002 with no problem. Followed each step exactly as shown. Saved $$$ in the process. Thanks for the help!

@FixItAngel 9 лет назад

***** Welcome and you did it!! Awesome man!! Please subscribe and have a nice day.

@tage202 9 лет назад

Thanks for the video. I couldn't do it without the step by step.

@FixItAngel 9 лет назад

tage202 Welcome!! Please subscribe. Thank you!!

@jamesswansonfineart 9 лет назад

You guys are fantastic!!! I fixed the handle in 1 1/2 and saved $500! Thanks!!!

@FixItAngel 9 лет назад

james swanson Thank you and welcome!! Can you please subscribe, that is all I ask. Have a nice day.

@beezohot 5 лет назад

Hey man thank you very much I have a 2003 Toyota Sequoia and I have the same problem thanks for putting a video up so we could do it ourselves I can't thank you enough👍👍👍👍

@PonderosaAutoRepairIncRedmond 8 лет назад

Love the rope trick, good idea!

@artiearroyo5688 6 лет назад

I just wanted to give you a HUGE THANK YOU for taking the time to record this and post this excellent video. It was a nice little repair and didn't take long to do, about an 1 1/2 hrs. I had difficulty with getting the panels back on as a few of the plastic fasteners were broken after removing. This may help some in the future, pick up a bag of these. I will replace the fasteners when I replace the rear window motor to our 2003 Sequoia.

@ctcpeteify 6 лет назад

get an aftermarket motor, Toyota wants over $300 I think, I got one on e bay works fine less than $100

@dirtygravy4172 9 лет назад

Thanks dude. Awesome video. I've been looking at videos for the last year and putting off replacing my back latch on my 2009 sequoia and I have to say with all honesty even though you didn't speak through your video this is the best I've scene on how to do this project. took me about an hour copying your every move. Easy as pie bro. Thanks for the video you made my weekend and the Sequoia is not fixed :)

@FixItAngel 9 лет назад

Clifton Morris Welcome!! Awesome you did it. It's all visual instructions. What you see is what you do. SIMPLE. Though there are some people that do not understand the video. How sad for impatient and slow learners. But thank you for the comment. Now go buy more tools with the money you saved. lol Please subscribe and have a nice day.

@diyover-engineeringthrough660 8 лет назад

One of the most usable how-to videos I've seen. Seems to have been made with a newbie's needs in mind. No useless talking, thorough, paced well, and provides some frames to help keep you oriented.

@donttrustnobody 2 года назад

Keep the videos coming.

@Mrhangi3 4 года назад

Damn this easier than the other video .. 👍👍 thanks now I do mine this weekend

@tomdeiters6887 8 лет назад

This video was very well done. It is the best one out there that I have seen. One tip that might make the job even easier would be to lower the rear window an inch before you start. I had some difficulty getting the rear window mechanism removed and remounted because I started the job with the window all the way up. This made a very tight fit with the mounting holes and required a little sweat to get the threaded bolts to drop through the holes. Other than that everything worked just the way it was shown in the video.

@FixItAngel 8 лет назад

+Tom Deiters Thank you for the tip Tom for the viewers upon taking on the task. I really appreciate it. Have a nice day and please subscribe.

@mattbayes1871 4 года назад

This was a great help to me. Was able to fix it on a Saturday afternoon.

@coryjneill1 9 лет назад

Thanks for posting this. You save me lots of $!

@aventure1892 8 лет назад

Ok, I'm Female but finally have time to learn how to do these things for myself. Well RU-vid makes it all possible and video makers make it easy. I reviewed about 5 of these and found this the best. Every step was shown, no blah blah to listen to, just plain here's how to get it done. My Mexican friends would joke to me and say: yeah the Mexican version was the best! And it was! Thanks...

@FixItAngel 8 лет назад

+A Venture Thank you for the comment. I try to make the video as easy to follow. I really hate to do commentary and video in the same time, it is very difficult to do and plus it's kind of waste of time for me and the viewer. My videos are, "what you see, is what you do. An easy to follow video, right? Please share and subscribe. Thank you.

@yoshit9819 7 лет назад

Great video. To the point. No talking crap. Awesome

@jawether1769 9 лет назад

Thanks for posting this video. I was able to replace my latch handle with minimal effort. For other viewers attempting to do this, please first verify the handle is in fact broken. It will be loose. If it is still taught, you may just need to lubricate the latch (at the bottom of the door). The black cover snaps off easily. Also, if you go through with this, be VERY careful removing the panel that holds your license plate as you can break the tabs off. Additionally, when reassembling, make sure the keyed lock is sandwiched between this panel and the door panel. You can see in the video how it is positioned before you take it apart.

@FixItAngel 9 лет назад

Fleagle 1 Welcome and thank you for the tips too. I really appreciate it. Please subscribe and have a nice day.

@electropentatonic 7 лет назад

Thanks for sharing your knowledge. I'm gonna change mine before it goes all the way. A lot of work for a handle but it'll be cake with this video.

@jeremyarmstrong7620 7 лет назад

Very helpful! New latch up and running!!

@388thalpha 4 года назад

Ty for the video it really helped, instead of another plastic latch handle I was able to find a metal one

@SpeakTheTruthNow1 8 лет назад

Great video! Worked great for me. This wsn't easiy, but you made it much easier. Plus, the tip to drop the rear window a bit before you start really helped me.

@savagenochill9818 4 года назад

Awesome video! i love the quick format with clean shots. Perfect walk through. Thanks!

@Vehrwahl 7 лет назад

Thank you for the excellent tutorial my friend! With your help I did this job in under an hour by myself. You answered all the mysteries before I even got started.

@FixItAngel 7 лет назад

Welcome Vehrwahl!! Please like and subscribe. Happy Holidays!!

@donttrustnobody 2 года назад

Thanks for the video brother, you helped me out a lot by showing this!

@jlsansuperboy 9 лет назад

video really helped me replace the broken door handle on my 2004 sequoia all by myself ... of course with the help of your great video as a guide. thanks so much for posting! god bless and keep up the good work!

@JohnDaPinoyBoi 7 лет назад

This video helped me a bunch! You the man

@alpersayar9532 7 лет назад

Thanks for the great video. While I was at it replacing the broken latch handle, I also removed the brake for the window that was preventing rear window from moving, the defroster was not working, and the rear window wiper blade was not working. removing the brake fixed all those issues and saved well over $1000 if I took it to repair shop.

@presidentpoopypants1448 3 года назад

Thanks for the video. I got my new handle (metal) in today, going to fix tomorrow. Figured while I am in there maybe lube the window gears/parts. :)

@ikennaihegbu7692 8 лет назад

yo, thanks a lot for making this video,, because I'm having the same problem,,, this helped a lot.

@LostatLastAgain 6 лет назад

This worked for me, thank you very much!

@michaelandbeckyreeder7818 7 лет назад

Excellent video. Thank you the detailed views. It was a big help.

@cwrooney397 5 лет назад

I just fixed mine thanks to this video.

@ctcpeteify 6 лет назад

Thanks for posting this. This will be my 2nd plastic handle replacement (2003 Sequoia) first time I wish I had watched this video first..muddled through on my own instincts, took hours, this will help. Anyone try a metal cheaper handle? I hate to pay Toyota $100 for another crappy plastic one. Thanks again. I'll subscribe.

@x..Steve..x 6 лет назад

Thanks for the great video!

@MarshallBLewis 6 лет назад

Very helpful. Thanks!

@Iroc22s 9 лет назад

Great video,did my mom's sequoia..took me about 1hr 10 mins..your videos are really helpful..

@FixItAngel 9 лет назад

Awesome!! I'm happy that this video helped. Have a nice day. Please subscribe. Thank You.

@alekseyvanovskiy2363 7 лет назад

Tanks a lot! I did it!!! You tutorial safes me a lot of time and money. Thanks.

@FixItAngel 7 лет назад

Welcome!! Please like and subscribe.

@evelynmckinney8745 8 лет назад

this video really helped me a lot. I didn't even tare up any part of my car. thank you so much.

@FixItAngel 8 лет назад

You are AWESOME!! Welcome!! Please like and subscribe. Have a nice day.

@clementebueno2684 7 лет назад

hear you speaking bisaya! I have a question mego. last winter, I use the 4wd of my 03 seqouia, after turning off, its so many hours before center flashing was off. after that the operation (on and off) was working fine. This morning there was a light snow so I switch to 4wd but when I turn it off the center light keeps blinking. Hopefully just like the last it will be fine. my concern is, If I continue to drive my seqouia with the blinking light on, will it distroy my tranny. Your info will greatly appreciated Mego. Thanks Clem

@danageorge9381 9 лет назад

great video. short sweet and to the point. also best commentary ever. :)

@FixItAngel 9 лет назад

Dana George Thank you for the comment. I really appreciate it. Makes me want to make more videos. Please subscribe. :)

@claessorensson225 8 лет назад

This was good!

@cardodude 5 лет назад

Good video. Perfect.

@cornwasher 9 лет назад

Excellent video....!!

@giegiofoncho 6 лет назад

Good video thanks

@gehovanylemuz1804 6 лет назад

Thankyou good video

@thedudeslawyer 7 лет назад

Hey, thanks for the excellent video! I fixed my latch in under an hour with your help.

@FixItAngel 7 лет назад

Welcome!! I'm happy you got it done like a boss!! Please like and subscribe. Have a nice day and Happy Holidays!!

@thumb-ugly7518 4 года назад

Thank you. 🤙

@trananhhien668 4 года назад

Thanks a lot my teacher.. Love you so much..hi

@toomey706 7 лет назад

Good vid. I may have missed the step, but rolling the back window down about an inch makes it easier to get the motor panel out.

@missinglinq 9 лет назад

Excellent video!

@FixItAngel 9 лет назад

Pottz1 Thank you!! Please subscribe.

@rareskymedia9498 7 лет назад

Great Video! Thanks!

@FixItAngel 7 лет назад

Welcome!! Please like and subscribe.

@africagonzalez58 7 лет назад

I have a chevy truck and the door latch has the same problem ... tomorrow I will try my best to fix it cant wait new project for me jijijii thanks!!

@MisterDubb 3 года назад

Thank you worked like a charm. Only problem I encountered is with the gold thing that lifts/lowers the window that has 4 screws. If your window is all the way up it's practically impossible to get that thing loose because the pressure the window puts on it. I lowered my window 1 inch and it wiggled free easily.

@vegasborn89 5 лет назад

You make it look so easy. 😏

@rgjoyquayle8160 3 года назад

Salamat Bai! :)

@THEFIREPPL 8 лет назад

Thank you just fixed mine only problem I had was dropping the screw in between the hatch lol

@FlyNRyanfpv 4 года назад

I hate that

@1r3n3o 7 лет назад

Thanks bro!!! Just got it done in the dark, so easy following along! However, I'll have to redo it again since I didn't align the key bolt into the hole, noticed it AFTER I finished :/ If anybody buys the Autocraft 79600CD metal latch (cheap on ebay), it doesn't feel the same as OEM but hopefully it'll last longer?! Dealer charges $104 for the original plastic part, forget that!

@FixItAngel 7 лет назад

Welcome!! wow $104??!! Pass!! Have a nice day

@luispantoja7943 5 лет назад

Great video! Just a quick and simple question; where did you bought the parts from? I read some of the reviews and people talk about some plastics parts? And from your comments, you say to sarta away. Which parts or where did you got them from? Maybe post links if it’s possible? Thank you in advance!

@prolamp5904 3 года назад

@Very nice ,Master

@Autotechno17 5 лет назад

where did you get that plate cover that's dope

@DaveHere100 9 лет назад

Whats the name of that tool that twist , that you used , kind of looks like a screwdriver?

@AJ-io3bq 5 лет назад

Instead of messing with the window actuator, simply pop off the lower two (of three) rubber plugs at the top-center of the lift gate. With a 6" extension, you'll have direct and easy access to the latch's nuts. If done with the lift gate open/up, the nuts will stay resting in the socket. If not, they'll fall into the lift gate--but they're quite easy to fish out.

@asimkhan8319 4 года назад

How did you get the window out of the way when you pulled the window motor out?

@patmcglone5367 9 лет назад

You Rock !! Thank you. Off to do mine now.

@FixItAngel 9 лет назад

Welcome!! Please subscribe.

@billyswifty 3 года назад

I followed the instructions and replaced the door latch, and it worked great for a few days. Now, the latch won't work again. But it isn't disconnected/broken like before, it is like the trunk is locked and cannot be unlocked. Did I miss something about how to connect the latch to the locking mechanism?

@mridware9694 5 лет назад

I have 2013 Rav4 and have rear door problem, sometimes it work fine but sometimes it get stuck

@aaronthoj2000 6 лет назад

I am having the same issue plus sometimes it will not lock the hatch at all. My concern is if bgg it's because of the door handle or the door lock/ unlock actuator. If it's the door handle that is broken, the door should not be able to open at all, since it's broken like in the video. I am leaning more toward my actuator being bad to where it does not unlock my cars at sometkmes and I end up pulling the handle but nothing happens. But if I forget it for a day or two, it'll work again. Then there are times when I can't lock my hatch at all. But again, if I wait a day or two, everything will be fine again. I will just have to open it up and see if the handle is still intact if it is, then I move onto the actuator.

@FixItAngel 6 лет назад

Chor Thor yes actuator could be the problem.

@surferbrian69 8 лет назад

Any idea of the exact type/size of plastic rivets required to re-assemble the interior trim panels? Seems like they get worn beyond functionality after one removal of the trim. The panels won't stay on properly. Thank you.

@FixItAngel 8 лет назад

+Beelze Bub You can bring one of the damaged plastic clips to a parts store and they will tell you what to purchase. Welcome. Please share and subscribe.

@MANUELBAYARDO2 9 лет назад

I need one of them Could you bring me one? How much is it?

@7volcast 7 лет назад

where did you get that twirl screw driver? thanks

@jameswhitehead3020 5 лет назад

You can buy it from pepboys or any other parts store.

@1seticat 10 лет назад

do you have anything on how to change the motor that control the rear window? Mine won't go down either by pushing the button or using the key in the rear door? Its a 2005. help

@FixItAngel 10 лет назад

Hello, the problem could be the control module for it. At 2:07 on the video, that black box. I have replace dozens. Hope this helps. Please subscribe

@aoeuidhtnsnthdiueoa 6 лет назад

You don't have to remove the power window assembly, there are holes drilled specifically so you can get a long socket extension through the gate to the 10mm nuts that hold the handle in.

@FixItAngel 6 лет назад

ok thank you for the comment. It's good then I got it done without going through those holes. There is always another way. Thank you for the comment.

@davidgrundy4964 10 лет назад

best method by far , thanks for sharing . just waiting for mine to come in the mail. whats the name of that tool that twist , that you used , kind of looks like a screwdriver?

@FixItAngel 10 лет назад

Welcome, Please tell me the time on the video I used that tool. Thank you.

@davidgrundy4964 10 лет назад

5:57

@FixItAngel 10 лет назад

Oh that tools is to remove plastic clips. I don't know the real name of it, sorry.

@davidgrundy4964 10 лет назад

I don't think that's what I was speaking about, it's the tool that you used to release the hatch. Kind of looks like an ice-pick, with a twist at the end.

@FixItAngel 10 лет назад

oh sorry, it's actually a pick that is curved. you can find it in amazon or ebay.

@junempis6641 2 года назад

Ayos migoy, asa ka nikuha ug replacement part? Salamat

@jamescalifornia2964 4 года назад

I believe they now have a metal replacement

@FixItAngel 4 года назад

James California that’s good. It’s about time.

@desertadventure4593 4 года назад

Do I need the window rolled down or up

@shengjiang7286 4 года назад

Roll up the window

@barthglennh Год назад

If this breaks over and over, it is the cable that is the problem. Replace the cable and latch.

@nicolasroque163 6 лет назад

I need to ask a question i have a 2001 sequoia my problem is sumbody broke the lock where u turn it so the window goes down then i can open it theres eletrical plug to the lock its all broken can u help me please

@FixItAngel 6 лет назад

Nicolas Roque only way is to replace the electrical plug. Go junkyard and see if they have it. That’s what I would do.

@nicolasroque163 6 лет назад

Thank u i found a guy with the same truck 2001 but crashed the whole truck for $750 all i need is that part n electricil seat motors but um gona open dat damn door tomorrow by watching u

@FixItAngel 6 лет назад

welcome!! please leave a comment after the fix. I would like to know how it went. have a nice day.

@nicolasroque163 6 лет назад

I will im gona subscribe to your channel

@lucidbarrier 7 лет назад

@00:59 What is the name of that tool you are using? It seems like you need that tool to open the hatch when the latch breaks.

@FixItAngel 7 лет назад

90° pick

@lucidbarrier 7 лет назад

I thought it was like an oil seal puller or something special. It looks like it has a twist on the end like in a helix/swirl shape. Appreciate you responding, I am going to have to tackle this soon. I think I can put new rubber isolators on my Mustang with that pick too. Sweet!

@barthglennh 7 лет назад

lucidbarrier I like the tool too! Need to make one. Thanks

@lucidbarrier 7 лет назад

You can buy picks at just about any auto parts places. Sears sells them for sure. It just looks special because of the camera angle. I also have an upholstery puller as well for pulling out those plastic retainers.

@CodeDoctorJet 6 лет назад

I bent an aluminum tent stake into that shape with no problem. Worked like a charm.

@rdmott 9 лет назад

how to get glass motor from back window?

@FixItAngel 9 лет назад

rdmott I do not understand your question.

@elandy4831 8 лет назад

2003 Toyota Sequoia does not drop back window how to know if the engine or else the glass that door need your help thanks

@FixItAngel 8 лет назад

+Andy Lopez sorry I do not understand your problem

@elandy4831 8 лет назад

had the same problem when I solved the most under glass above does not mind if the glass down

@ximeavila8096 3 года назад

can you help me with the name of the parts.

@leemaverickly 5 лет назад

Need your help. My handle is fine but the problem is either the cable or the latch. I am trying to get to the latch however I am stuck at 3:48. After removing the 4 nuts I can't push the window regulator to the back. Is there any trick? Should I roll the rear windows all the way down? How do I prevent the glass from dropping? Thanks.

@FixItAngel 5 лет назад

yes lower the window just a little

@leemaverickly 5 лет назад

@@FixItAngel Thanks for the quick reply. I will try and let you know if it works tomorrow.

@hernanespirituncbroker828 8 лет назад

how do you reduce the slack of the cable? It looks like after I install the new handle the cable has extra slack it won't unlatch the back door.

@FixItAngel 8 лет назад

+Hernan Espiritu at the lock mechanism, where the cable snaps onto, you need to bend that metal to remedy the extra slack.

@hernanespirituncbroker828 8 лет назад

+Fix It Angel, Did you mean at the Back Door Lock which is on the other end of the cable? Okay I'll do that. I decided to attach a secondary cable as an emergency release on the inside as additional modification so far that's the only option I'm using to unlock it not from the outside. But thanks for the suggestions.

@FixItAngel 8 лет назад

Yes, Hope it works. It is pretty hard to bend. I did it on one vehicle and it worked. Thats good you attached a secondary cable. Welcome. Please share and subscribe.