EASY GUIDE to Install The Coil Kit On A Kohler Command Engine (DSAI Ignition) 

Be sure to pick up YOUR Taryl Apparel Today! Shipping Worldwide Daily. www.TARYLFIXESALL.BIGCARTEL.com And There's Your Dinner!!

Taryl is a genius. Yeah, the tteeth are a goofy gag, but his knowledge and common sense approach to small engine repair is the best on You Tube.

Best repair videos on the Tube - for printers!

Just installed the coil kit on my Kohler 26 hp courage and adjusted the valves like your other video showed, let it sit 2 days for the valve covers to dry, they were leaking also, fired it up today and it ran like a champ, better than new. Valves were out a little not to bad, can't thank you enough, sure wish I could buy you a beer or two or three.................... thanks again !

This video is a lifesaver! After struggling with my mower losing power off and on for about a month, I finally figured out that it was dropping a cylinder and ordered this kit from kohler. The video was made on a mower exactly like mine and the instructions were so good that the whole project went off without a hitch. Fixed it in 4 hours and 2 beers for $80. And I even had an extra zip tie and Krohler sticker! Thanks for the great directions.

Already fixed my mower about a month ago. I still come back to watch these tutorials just cause taryl is entertaining. Keep it up.

Seeing Taryl's facial expressions waiting for tech support is HILARIOUS ! i absolutely love it.

I was looking to fix my Kohler ignition, who knew I’d find out how to fix my printer issues too !

I have a 2008 Walker super bee 27 hp. It never gave me a problem…until I smelled something…the coil caught fire! Two buckets of water from the pool and the hose put out the melted plastic. I removed the engine…horizontal shafts are a pain. I luckily found your video. I had no clue about the mystery wire. Thanks for the dinner.

Thanks so much for the video! I had the exact same issue with my Exmark and started researching online and sorted it down to the bad coils and new replacement parts, and then came across this video. It confirmed that I was headed the right direction with my diagnosis and then saved me a ton of money! You have a new subscriber and a thumbs up! I love your humor, and yet you get right down to business with precision info and what needs to be done spot on! ...Thanks again.

I so want to fix a printer that way one day!!!! you guys ROCK!!!!

Thanks Taryl. Watched your video, ordered the kit, watched the video again when the kit arrived and fixed my mower. Spot on instructions and my mower runs s great again.

you are really the best plus you give a laugh or two.. excellent no wasted moves NO BOREDOME

You are my hero saved the day again. Keep taking care of those nice chompers Taryl

Your the man Taryl, watched your video and replaced the ignition coils without a hitch thanks to you. Now my Cub Cadet L60 tank is running like a champ!

I'm going to be a future mechanic because of you!

Another excellent video by Taryl Dactal!

I'm Putting My 1st Set Of Head Gaskets On This Krohler Crommand 27hp CV740S, And Found A Bad Coil, Glad I Found Your Video, I've Been An Auto Mechanic For 20 Years, Just Bever Had The Patience For These Small Motors, And I Know That Prolly Don't Make Sense, But Anyhow....I've Seen All Kinds Of Mechanics & Shops Over The Years, And Just Goes To Show You, That You Aint Gotta Be The Most Snazzy & Fancy Place In The World, To Be The Best Mechanic Shop Out There, This Guy Taryl Is Smart As A Whip, And The Entertainment Takes The Edge Off As Well, Nice Work Man, Keep Going....And Oh, By The Way, I Loved Your Home Made Lift Video & Head Gasket Video Too 💯

Ah man you sold me with the printer overhaul. ..subbed.

While I don't have a two cylinder, I do have a Cub Cadet 2166 16HP. I used what you taught about DSAI/DSAM to order a new Kohler kit to fix. Engine is horizontal = a real pain. You would be proud of the way I got to those recessed flywheel cover bolts. By the way, I got filthy and grimy. I hope to reply about a smooth running engine success. You guys are the best

I loved the printer repair, a man after my own heart!

Taryl I don't always get your altered ego but I have to say you're an amazing small engine mechanic. Thanks for the videos.

I've had a couple of printers that needed a shotgun too. Excellent repair video guys.

Those Kohler mags are similar to the old Briggs n' Strattons back in the 70's That really sounded good Taryl!

I've got a printer here I need to apply that fix to! Great video as usual. Thanks!

Thanks for all the"side information" , that is a great way to learn !! Hope you will do more of that in the future. Thanks for another great video.

Thanks for the vid Taryl. Im most certain this is why my command loses spark intermittently. Wouldnt have known about the kit without your vid.

He fixed that printer real good.

Got one of those khrolers, courage v twin, and looks like I'll be gettin one of those kits. The engine has been sitting, waiting to go into one of my mowers but haven't wanted to fool with the goofy coil wiring. Looks like you've shown me the solution! Thanks buddy!!!

Fixed it with a mossberg fix-o-matic!!! Nice!! 🇺🇸

Taryl number 1 mechanic Another fine video

Thank u Taryl. I was hoping it was that simple.

End of month, out of data, so went ahead and got the shroud off. Then decided to go to the library and watch this vid. I had made the mistake of taking the bottom screw out of the oil cooler, and it was a struggle to get out. But I shortened this screw to 7/16" "thread" length and it went back in pretty easily. So the oil cooler is bent out of the way just like Taryl says to do, and I'm awaiting the kit. Always, always consult Taryl first.

I truly wish there was someone in or near where I live that could fix a problem like he can.

I don`t know anything about your engine thing, but when I saw the teeth, I just had to look. I loved the printer bit and loved the other bits too. Nice one, keep up the good work :)

Thanks for the shooting lesson. Good video Terell

Dude you are the man! Your videos have greatly help me thank you so much.

Thanks for posting this “how to’ video. My new ignition modules arrived today (with one lead each), and I looked at the ignition modules on my mower with 3 leads each; and I said, Oh, sh#t, they sent the wrong type! This video told me why the new modules were different, it showed me how to install the new modules, AND it gave great installation tips. Kudo’s to you! Slainte.

Great Video....... Koehler running great after kit installed

"No son, that's MAGENTA!!!!" Classic

Just replaced a set in the shop, and said some 4 letter words other than Crap before I got the cover and breather back on. Nice Kroller. Should have gone for the Shot Gun. But the customer might not have liked that. Great video Guys.

Got to love these engineers. I bet you anything they would have said "Well it looked good on paper". I would love to put them to work on their products, They would change their minds on a lot of BS they throw on these mowers.

Thanks for the lesson Son. Hell If I didn't know you were crazy, I'd swear you were one Top Small Engine Technician. I know you are the best. I only wish you lived closer to my homestead. You'd be my full time tech.

Love your videos, very interesting & you really tell how to fix.Thank you!!!

You guys do good work

When you shot the printer,reminded me of old days when I had a battery watch & put a new battery in & wouldn't run so I shot it!!haha

I am doing this for the second time. The first set lasted 2 seasons. Koehler said it was due to voltage spike from elactric blade engagement. The guy from Koehler was awesome, he walked me through the whole process of checking the switch and sure enough it had a spike. A mechanic friend confermed that it is plausible that the clutch/engagement will use a little more power to pull it in as it ages. I thought this only happened to ME 😂. The guy from Koehler gave me all the part #s for the coils ( coils only ,not the whole kit) saved me $20.00 then he gave me the part # 25 755 31-s for the DIODE KIT. Told to install the diode nline. I'm thinking it is like a one way valve for electric. I am a skeptical person but this all makes sense because for the last 3 years I have been getting more and more fire ants. The last time I counted, I stopped at 70 over six acres.I always put stuff on every mound.I am in the process of doing the install now. I put it off all winter because of another neck fusion, now I have to do it because I can't find the coil replacement Gennie. I'll let everyone know how it works out.Thanks Taryl for the little reminders ( hidden bolts I forgot about).

Thanks TARYL got one in today didn't know there was such a thing

They must have updated the instructions. Step 4 of the DSAI Module instructions references the "eyelet of the RFI sheathing" to put under the module mounting screw, just like you said, Taryl. For the DSAM Module instructions, you get to step 8, and it tells you to go back to the DSAI Module instructions to complete steps 3 - 12, including that Step 4 that references the "eyelet of the RFI sheathing." All good now - hope this helps someone else - Another GREAT instruction Video from Taryl.

I like watching you work tarel,no IAM just learning paithance

This was a great help, thanks Taryl... you da man.

Great Video! Thanks for the lesson.

Just went through the same procedure but on a CH25 Kohler. This engine had already been converted to the magneto system. It ran fine, but wouldn't stop decently. Turn the key off and the engine would run on one cylinder. This was verified by looking at the plugs after shut down. One was dry, the other wet. I also used a spark tester to verify what was going on. After the key was switched off, the right side had no spark but the left continued to spark. So, I installed two new genuine Kohler coils and it solved the problem. Apparently, the bad coil even though the engine ran perfectly, had an open kill circuit which resulted in that coil continuing to fire.

Love you guys,, Man Its been a loooooong week,, so needed a Taryl D. fix before the work week! I'm good to go now, when my wrench slips, or I burn my fingers, I'll think bang-bang-mooowwwwww & carry on. thanks, kodi

Thats my kind of printer repair.

Father and son bonding real well over 'final solution' of printer LMFAO😂👍,,,Batman's Meow

Yes your are taryl and I thank you for teaching us.

videos keep getting better lol keep them coming Taryl

Brilliant video.

Had to replace the coils on a 840-3012. Took longer to pull the top off than to replace the new coils and wiring. Simple fix with the included instructions so if anyone is experiencing this problem don't be afraid to jump right in there and get it done.

Excellent video Taryl !!!

I enjoy your videos they are very informative

Thank you for this video..Very helpful..

Good video Taryl, keep them comeing !!

We've got the same printer, and it is also a piece of shit. Haven't had it for very long, and it's got lots of problems. Lol. Love the videos, Taryl

great way to start a video, always wanted to destroy a printer that way fun and knowledge

Awesome guys, haha loved the shotgun. TLSC LOL

weird coils, just did the same repair a month ago

Taryl, another awesome how to video!

THAT'S THE WAY TO DO IT TARYL--YEAAAA...

Excellent video!

You are the best! I like your videos so much.

Another awesome vid!!! I just wish you could have let us hear what the engine was doing before you fixed it. But I loved it anyways! Thanks!

Mustie 1 -- has a vid to show how fix coil towers. I have supper glued and smear jb weld around the break. Make sure everything is clean. I have done this and it works

Dang!..that Kohler reminds me of a Ford I had one time..I had to take off half the engine to get the water pump off to replace it. Everything was either bolted to it or a bracket that was bolted to it lol.

I wouldn't mind paying you what you charge for this kind of job..you know what what you're doing..in these days its hard to find someone like you..

You guys crack me up I can't stop laughing🤣🤣🤣🤣🤣🤣🤣🤣

Thnx Taryl. Getting ready to do this to a Grasshopper. I wondered the same things. No mention of ground cables & why does the supplied crimp it connector have that extra plastic.

another great how to cheers taryl

Great job done.

I just jacked some coils from a old kohler and did my swap

Thanks for the video, one of the best and funniest I've seen! I think I'm having the same problem with my Kohler CH740S although I've got the type with the external module. Looks like the kit I need, 25 707 03- S is the same one you installed, your video will definitely make the job easier.

Taryl shoots all! Great new channel! Bye YankeeMarshal!

Enjoyed this great ......There's your dinner

I'm from north carolina here

Scuff them up... Nice and Clean Aludiment... LOLOLOL You have a new fan! :)

You guys crack me up😂😂😂

Fixed it but GOOD!

TARYL ! Have you considered using dielectric grease for electrical contacts ? I use it all the time from plug-ins/connectors to 12 V light sockets. It promotes contact and reduce the chances of corrosion.

By the way, Happy Thanksgiving Taryl and crew!

You the. Man taryl dactal

Hey taryl. Love yours videos

You can fix coil towers with super glue and smear jb weld around the crack .It works, I have done it. Clean real good first

hey Taryl just loosen the two screws on that PCV and slide it out that's what i do makes it easy er, you have a Great video though

Dasai ignition now you getting way too complicated for my brain......damn tartl is a shot!

Many thanks 😊

The Ink Cartridge Mafia.

thanks Taryl

Thanks for your video! Just FYI, when I got my part I tore into my mower, started taking things out (and throwing stuff away) and then I look at the new part they gave me and it is NOT A NEW PART. Both modules have big scuffs and a couple dings taken out of them. Pretty crappy of Sears Parts Direct to sell me a used part. It did work, but I didn't feel confident installing it. Would have sent it back, but I needed the mower to run today.

and yes i was wondering what those lifting lugs were for. I have a kohler command 20 mounted horizontally, on a lincoln ranger 8 welder.