Тёмный

Easy Trim Dry Ridge Kit Installation Video 

NBP Ltd
Подписаться 9 тыс.
Просмотров 33 тыс.
50% 1

A succinct guide to fitting Easy-Trim's Ridge F dry fix kits, which ensure ridge tiles are securely fastened to the roof substrate.
#easytrim #dryridge #roofing #tiles #buildingmaterials #construction #rooftiles #installation #howto
To see our full range of products and services, visit our website: www.nbp.co.uk/
Social Media
Facebook: / nbplimited
Twitter: / nbpltd
Instagram: / nbpltd
LinkedIn: / northern-building-plas...

Опубликовано:

 

10 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@gerbilsinleighton
@gerbilsinleighton Год назад
"press all three clips firmly into place"... Except you can't because the union just bends! You have to push them down before fitting the next tile, and then force it into place under the already positioned clips!
@northeastcorals
@northeastcorals 11 месяцев назад
Is there any advantage to using the straps to secure the battens to the rafters vs just screwing down thought the battens into the ridge with decent stainless steel screws? The straps just seem to be a bit of a waste of time, especially if retro fitting if you can just screw the battens to the ridge.
@nbpltd
@nbpltd 10 месяцев назад
You could use a long screw to fix the battens in place, although with it being vital that extreme winds at the ridge do not pull the fixing out, we would recommend using the batten straps to provide a very secure fit.
@northeastcorals
@northeastcorals 10 месяцев назад
@@nbpltd I fitted my new ridge a few weeks ago & I just used 120mm x 8mm landscaping hex head screws through two 25mm battens into to 9x2 ridge board & it's absolutely solid. The long thin stainless screws provided with the dry ridge system would definitely give way LONG before the 8mm landscaping screws. For my situation this way was a lot faster than messing on with straps but obviously every situation is different.
@billyguard-fox3526
@billyguard-fox3526 8 месяцев назад
Personally I'd bang a strap either end and middle. Only if its my own property tho ​@@northeastcorals
@aliatas6647
@aliatas6647 Месяц назад
Do you need ridge trays with this?
@nbpltd
@nbpltd Месяц назад
You will if fitting on hips, but according to Easy Trim's installation instructions, they are not necessarily required on the ridge. For more information, you can view the Dry Ridge Kit and Hip Accessory Kit installation guides here: easy-trim.co.uk/storage/1566/entry-level-ridge-kit-installation-guide.pdf easy-trim.co.uk/storage/1616/hip-accessory-kit-installation-guide.pdf
@matildadrake3592
@matildadrake3592 Год назад
ρгό𝔪σŞm 💪
Далее
How to Install a Dry Ridge System -  DIY Fit Part 2
9:00
Dry Ridge System Retrofit - Advice and Tips
12:57
Просмотров 32 тыс.
Verge U Installation
1:43
Просмотров 54 тыс.
Breedon Tile - Fitting a Dry Valley
3:25
Просмотров 108 тыс.
Dry Hip installation video
3:51
Просмотров 29 тыс.
How to Install a Uni Click Dry Verge
2:33
Просмотров 130 тыс.
How to install a dry ridge system
3:26
Просмотров 24 тыс.
FINISHING THE EAVES - Timber Fascias & Soffits
11:22
Просмотров 152 тыс.
Uni-Vent Rapid Ridge/Hip installation video
3:06
Просмотров 75 тыс.
Marley Universal Dry Verge Fixing System Review
5:53
Просмотров 136 тыс.
How To Install Redland's Uni-Vent Rapid Ridge
5:33
Просмотров 31 тыс.