Тёмный

Easy tuning belt replacement, without any swearing! Grundig Satellit 650 Pro rest. pt.4 

Electronics Old and New by M Caldeira
Подписаться 24 тыс.
Просмотров 3,5 тыс.
50% 1

There were three problems with this radio, all of which required parts to be shipped to Madeira. The audio selector chip, the MC14066B, was acting erratically, and I ordered CD4066 replacements, hoping that this chip was a direct replacement. The speaker foam needed to be replaced, and again, ordered. However, the most scary task was the pre-selector drive belt that needed to be replaced.
All references to this latter job prepared me for a nightmare. I was warned that lots of swearing would be required, and that the task would burn up many, many hours. I was suitably scared.
However, the result was incredible. I found a forum post that described a really simple way to do this, and actually doubted that it would work. Surprisingly, it went off like a charm, and I'm happy to show you how it's done.
I hope that these experiences help anyone who runs across the same problem. That's the objective of these videos, anyway.
Enjoy.
You can now support the channel:
/ mcaldeira
paypal.me/macaldeira
#tuberadios #antiqueradio #radiorestoration
_____HUNDREDS OF OTHER VIDEOS TO CHOOSE FROM____
DIY TEST GEAR: The title says it all:
• Zener Diode Tester - P...
RESTORATION BUILDING BLOCKS: A series of videos showing detailed steps used the restoration process of tube equipment:
• How to safely check th...
HowTo's: Various videos on some simple techniques and projects:
• Extend tube radio FM b...
See also playlists on some other completed restoration projects.
PHILIPS BX750A:
• Philips BX750A tube ra...
TELEFUNKEN OPUS 2114:
• Telefunken Opus 2114 s...
SABA UW-175-Z 3D:
• Saba UW 175-Z 3D tube ...
GRUNDIG 1070:
• Grundig 1070 tube radi...
SCHAUB-LORENZ GOLDY 58 type 3020:
• Schaub-Lorenz Goldy 58...
BUSH VHF64:
• Bush VHF64 tube radio ...
GRUNDIG 3060A:
• Grundig 3060a tube rad...
TELEFUNKEN OPERETTE 8:
• Telefunken Operette 8 ...
GRAETZ SUPER 171W:
• Graetz Super 171W tube...
LOEWE-OPTA MAGNET 3737W:
• Loewe-Opta Magnet 3737...
BRAUN ATELIER 3:
• Braun Atelier 3
LOEWE-OPTA TRUXA STEREO 4741W:
• Loewe-Opta Truxa Stere...
GRAETZ COMEDIA 616:
• Graetz Comedia 616 tub...
SABA FREIBURG W2:
• Saba Freiburg W2 (WII)...
GRAETZ MUSICA 4R417:
• Graetz Musica 4R417 re...
You may also be interested in ...
CAPACITOR LEAKAGE TESTER:
• Capacitor leakage test...

Наука

Опубликовано:

 

27 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 91   
@DavidTipton101
@DavidTipton101 Год назад
Well done Manuel, I love watching the dial move to the selection, it would be worn out if it were my radio 😀😀
@electronicsoldandnew
@electronicsoldandnew Год назад
I know. Is mesmerising 😊
@jtalensa2957
@jtalensa2957 Год назад
Bravo señor Caldeira, tenía el modelo Grundig satellit 600 y tenía el mismo problema se quedaba sin voz y perdía señal y las lámparas seguían encendidas, me tuve que desacer de la radio con gran dolor por falta de espacio pues nadie la supo reparar, ahora me quedo más tranquilo y saber que era problema de el circuito, gracias por el video, un saludo.
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@greggaieck4808
@greggaieck4808 Год назад
Electronics old and new you are good at electronics restoration of vintage shortwave radio Receivers and Alignment
@electronicsoldandnew
@electronicsoldandnew Год назад
thanks
@eddys.3524
@eddys.3524 Год назад
I always had the idea that swearing was the essential and the fun part in replacing tuning belts... again I stand corrected.
@electronicsoldandnew
@electronicsoldandnew Год назад
No, when you move up the learning curve, you learn to do it in your head, so that all watching think you’re doing it calmly and confidently 😊
@jorgesilva9247
@jorgesilva9247 Год назад
Only recently I found your channel. Great content !. Greetings from a fellow countryman.
@electronicsoldandnew
@electronicsoldandnew Год назад
Viva, espero que goste do canal.
@electronicsoldandnew
@electronicsoldandnew Год назад
Viva, espero que goste do canal.
@tubeDude48
@tubeDude48 Год назад
You pulled a "David Tipton" on the speaker!! Nice!
@electronicsoldandnew
@electronicsoldandnew Год назад
High praise indeed. Thanks
@davidhollfelder9940
@davidhollfelder9940 Год назад
Nice speaker surround replacement job. I’ve always had to lift the dust cover (hinge method), and shim the choice coil, to insure it’s centered, then flip down and re glue the dust cap.
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@retro_tech
@retro_tech Год назад
"And if I removed it, I can put it back." Famous last words... ;-) All joking aside: great job once again! Wonderful radio as well.
@electronicsoldandnew
@electronicsoldandnew Год назад
Thanks
@electrosoundaust
@electrosoundaust Год назад
For once, three steps forward - 0 steps back! Keep up the good work.
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@davidpostma9862
@davidpostma9862 Год назад
I have been so helped with this instruction. Many many thanks.
@electronicsoldandnew
@electronicsoldandnew Год назад
My pleasure 👍
@horatiohornblower868
@horatiohornblower868 Год назад
Every time you say “kaputt” I must laugh. Sounds so much better than the English “broken”.
@electronicsoldandnew
@electronicsoldandnew Год назад
True 😊
@radio-ged4626
@radio-ged4626 Год назад
Good to see your parts have finally arrived and everything worked. Must be quite a relief that all worked fine. Looking forward to see this completed it's a great radio.
@electronicsoldandnew
@electronicsoldandnew Год назад
Yes, it’s a great relief 😊
@poormanselectronicsbench2021
Nice work on the replacing he surround and on the belt replacement as well. I know it's a bit more work, but having some crimped push on speaker connectors installed makes things more "service friendly" instead of soldering, and you do find that a LOT of even "High End" speakers connect the crossover wires to the drivers with crimped push-on connectors as well. As far as searching for info on things, I make sure that I put a few related words into the "tags" section of the video info here, and I have found that they will come up well on google searches as well as a RU-vid search. Keep up the great work, that is quite the unique tuning indicator system on that radio, I'm sure it added some engineering complexity, and cost to it, but it makes it an interesting unit for sure 👍
@electronicsoldandnew
@electronicsoldandnew Год назад
I do add tags to assist in the searches. This system is rather interesting… we’ll see if it becomes useful, or annoying in regular use 😊
@EsotericArctos
@EsotericArctos Год назад
C clips -- Yes that is the name. Though I have heard them called "Jesus " clips. The reason - so often the fly across the room and it's "Jesus, where did that thing go? ". 🙂 Thanks for the update to the Grundic S 650. I'd almost forgotten this one.
@electronicsoldandnew
@electronicsoldandnew Год назад
Yes, those clips do tend to bring out the religious in us 😊
@maartenschapendonk6345
@maartenschapendonk6345 Год назад
Great work and great fun to watch 👍
@electronicsoldandnew
@electronicsoldandnew Год назад
😊
@feq67
@feq67 Год назад
Great work on the Satellit 650! Many thanks for the reference video on the pre-selector belt replacement!
@electronicsoldandnew
@electronicsoldandnew Год назад
pleasure
@greggaieck4808
@greggaieck4808 Год назад
Electronics old and new your Grundig salellit shortwave receiver is cool
@andreaperino2294
@andreaperino2294 Год назад
Hi, many thanks and very well.
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@ralphj4012
@ralphj4012 Год назад
Nice remedial work. I'm sure your cat lost a life when you pushed down on the speaker dust cap. I certainly did. Ho, ho.
@electronicsoldandnew
@electronicsoldandnew Год назад
😊 It’s so easy to mess up. Luckily it wasn’t serious.
@danielsaturnino5715
@danielsaturnino5715 Год назад
I actually heard that joke from Uncle Doug on his videos :) I found it very funny.
@electronicsoldandnew
@electronicsoldandnew Год назад
Ok, thanks Uncle Doug 😊
@danielsaturnino5715
@danielsaturnino5715 Год назад
😁
@nigelbrockwell6237
@nigelbrockwell6237 Год назад
Looking great so far. I've never repaired a speaker before, it is nice when you can get spare parts, even it it does take a little time receiving them. I love the tuning, but would find it strange manually turning a knob and having a slight delay on the dial pointer. I wondered if a tension wheel could have been used on that belt, if one wasn't available. It is looking like a very nice radio already.
@electronicsoldandnew
@electronicsoldandnew Год назад
I agree that the tuning is a little strange. We’ll see how it goes, and if I get used to it. Not sure.
@giovannit.5786
@giovannit.5786 Год назад
Hi, I accidentally bought a Satellit 600 Pro, basically the same radio, 10 days ago. I have the same problem with the preselector belt and your video was very useful to me, it was a great stroke of luck that you have published this video right now. I also have the problem of the preselector shift, more pronounced than on your 650. I hope you will want to post a video on how to fix this problem. Thank you very much again. Ciao from Italy.
@electronicsoldandnew
@electronicsoldandnew Год назад
I plan to post any videos that may be of interest to someone looking to do the same thing.
@giovannit.5786
@giovannit.5786 Год назад
Your videos helped me by giving me courage and the other night I opened my Satellit 600 and fixed the few problems it had, I pulled the belt, fixed the preselector shift and cleaned from the acid leaking on the positive of the AA batteries . I just need to change a couple of bulbs bought on ebay that need to arrive. Great radio with great sound, I ran reception tests comparing with a friend's pair of Tecsun and Yaesu receiver using a wire antenna and a mini whip antenna and I'm super happy with it. The internal antennas do a good job but an external antenna is highly recommended to increase the signal and give it stability, as with all AM radios. A mini whip antenna is on the way from aliexpress. Thanks again for your videos.
@electronicsoldandnew
@electronicsoldandnew Год назад
My miniwhip is the best thing I ever added to my bench. I receive LW, MW and SW stations that the internal antennas don’t even sniff.
@apb629
@apb629 Год назад
Also probvlem with the CD4066 and the speaker cone.; looks easier now (to me); just follow your process.; thasnk you
@electronicsoldandnew
@electronicsoldandnew Год назад
pleasure
@tiagomadeira838
@tiagomadeira838 Год назад
O gato vale bem a ração que come! Foi graças a ele que tudo se compôs.😁👍👌
@electronicsoldandnew
@electronicsoldandnew Год назад
pois 😊
@tubeDude48
@tubeDude48 Год назад
👍👍👍
@wadez5946
@wadez5946 Год назад
Mind sharing where you obtained the tuning drive belt ? Thank you for posting such an informative video!! I am currently restoring a 600, so this was incredibly helpful. Thanks!!
@electronicsoldandnew
@electronicsoldandnew Год назад
On ebay. Search for “Abstimm-Riemen für GRUNDIG SATELLIT INTERNATIONAL 600 650 Satellitenradio Belt”
@wadez5946
@wadez5946 Год назад
@@electronicsoldandnew Thank you for responding!
@electronicsoldandnew
@electronicsoldandnew Год назад
Pleasure
@erikdenhouter
@erikdenhouter Год назад
E-clip. C-clip is a bare piece of round wire without any features.
@ioanchindea4427
@ioanchindea4427 Год назад
Hi! I have some suggestions first to clean plastic ( foam) residuals from metal just try "white spirit" instead of alcohol. Uhu glue with plastic and metal not work well. The cement glue is more better! The Uhu glue after dry simply will separate from metal if you have luck the paint from speaker will kell de glue on place!Kind regards, John!
@electronicsoldandnew
@electronicsoldandnew Год назад
Thanks for the tips.
@ioanchindea4427
@ioanchindea4427 Год назад
You welcome!
@erikdenhouter
@erikdenhouter Год назад
I thought of white spirit (terpentine ? ) too, it is really good against almost any sticker glue, but in this case I wondered if it would leave an oily residu soaked in the paper which would work against the glue.
@electronicsoldandnew
@electronicsoldandnew Год назад
I try not to risk anything, so isopropyl alcohol is usually my first choice
@erikdenhouter
@erikdenhouter Год назад
@@electronicsoldandnew That's right, but alcohol evaporates very fast, and white spirit does not. In case you have a sticker or other temporary glue that is stubborn, you can pack the spot in paper or cloth, drip some white spirit on it, and soak it for a day. Impossible with alcohol.
@davidhollfelder9940
@davidhollfelder9940 Год назад
“E” clip
@user-ny2st6qu9f
@user-ny2st6qu9f Год назад
Добрый день. Какой размер ремня ?
@mattvoce1091
@mattvoce1091 Год назад
C clip or “Circlip”
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@vicmabus1532
@vicmabus1532 Год назад
C-clip, circlip, or just snap ring.
@electronicsoldandnew
@electronicsoldandnew Год назад
That’s it, thanks
@goodun2974
@goodun2974 Год назад
Some of those clips are shaped more like the letter E and referred to as "E-clips". And of course their alternate name is "Jesus clip", as in "Jesus Christ where the hell did that damn clip fly off to?"
@electronicsoldandnew
@electronicsoldandnew Год назад
😊 I’ve had that a few times before
@robyoung9463
@robyoung9463 Год назад
"E clip" : }
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@apb629
@apb629 Год назад
Hi Manuel; I am working on the same radio; I have tghe same problems you had; one of them is a broken belt.; can you help informinmg the diameter of the belt to find it here in Brazil.; thank you; very nice job you do with your radios.
@electronicsoldandnew
@electronicsoldandnew Год назад
I’ve already fitted the belt so cannot measure that one. However, judging from the old belt, I believe the new one should have a diameter of 9cm.
@apb629
@apb629 Год назад
@@electronicsoldandnew Yes, I understand.; I will look for a 9cm belt (or around: unfortunatly mine broken in many pieces
@electronicsoldandnew
@electronicsoldandnew Год назад
👍
@carloschiappa6619
@carloschiappa6619 Месяц назад
Buenas tardes tengo un equipo de estos Satelital 600 para repuestos completos si es de interés de alguien soy de Rosario Argentina Gracias,,!! Estando desarmada para cambiar las luces se cayó al piso y se partió la plaqueta,,
@digger105337
@digger105337 Год назад
Use chop stick almost do sum dum ting.🤣🥢
@electronicsoldandnew
@electronicsoldandnew Год назад
😊
Далее
HYDRAULIC PRESS VS ARMOR, USA AND RUSSIA
10:16
Просмотров 58 тыс.
This FENCE Lasts 100 years!!!!
18:00
Просмотров 309 тыс.
The Truth About SIM Card Cloning
13:04
Просмотров 1,1 млн
Grundig Satellit 600 reparieren und abgleichen Teil 1
20:54
Grundig Satellit 600 MW SSB SW
2:37
Просмотров 10 тыс.
iPhone 15 Pro в реальной жизни
24:07
Просмотров 449 тыс.
$1 vs $100,000 Slow Motion Camera!
0:44
Просмотров 27 млн