eBike Factory: Connectors from Julet 

It's finally nice to put a factory to the name Julet, ever since my first kit I always wondered who made these waterproof connectors, it's also nice to know they are all made under one roof I always assumed the designs were just licensed out and each different ebike kit manufacturer made them as required - still though it's not a common name tag on ebike related products I either search by picture or "waterproof" if I need a controller or after market part.

And now when plug head breaks, from moving battery in and out . Your gotta replace whole module or do they make a plug head fix ?

Fantastic, the Julet plug has become a de facto e-bike industry standard BUT I can't find the bloody plug anywhere!!!

Hi ! Great topic. ! I’m trying to find a 3 pin to 2 pin adapter for my Lectric XP2 …any thoughts or suggestions ? I’m trying to connect brake sensors as part of a hydraulic brake upgrade. Any thoughts appreciated.

Other reasons why they are coming out with quick connection water proof cable is because they don't want you to swap the controller ( they are trying to limit your top speed ) that is for example 26 amps for another controller that might end up being probably 40 or 50 amps continuous discharge current, which pretty much allows you to reach a higher Top Speed at the expense of amp hours...The con to this will probably be that your battery will be depleted at a faster rate therefore you are going to have to charge the battery more often than normal plus another con is... 👉...less 🔌charge cycles left for the🔋 battery which refers to life for the battery it's definitely something to think about. If you do decide to go with a higher amp discharge controller make sure that the BMS inside the lithium ion rechargeable battery grants you to discharge the battery at 40,50,60,or 70 amps (normal) continuous discharge and not peek discharge / something else. The pro to this cable is quick,simple connection. The con to this cable is you won't be able to find out what color cable is positive,negative,phase wires,Hall sensor wires,etc.

I am here because I need to learn about these to fix my bike. I didn't learn a thing. Thanks!

I always wondered what this connector was. It is nice and compact. The other connectors in the waterproof controller are randomly called m5/m8 cable. Another connector that is used in between controller and accessories is called 1T4/1T5 cable. These names are not standard.

Superb. Thanks!

How do you test with a multi meter. My motor is not engaging

I need to change from a flat connector to a Juliet connector to upgrade my CYC gen 1 motor to ASI controller. Any instructional videos on installing the JULET connector?

Nice. Fit easy and tight when new, impressed. 3.5 years later plastic has hardened and cover slipped back exposing pins. will dielectric grease help, or heat?

Your thoughts on using Permatex DiElectric grease on connectors to make dis-connecting easier?

Is there a way to tap a higo Z910 Julet connector for USB power? I have a bafang hub motor and a 52V battery and I want to add a USB device in between.

They really are the best, that's why we use them in all our bikes!

MY LEAD KEEPS POPPING OUT WHEN IM RIDEING OUT! ANY ADVICE PLEASE 😰😰😰😰😰😰😰

Can I ask a question I have a (9pin) Juliet connector on my rear bike motor where do I look to see what type of battery connector do I need since I want to upgrade my battery ah can you help me with this info I have a shwinn sidewinder 26” 36v 10.4 ah 250w can you plz help me with this thank

Hi Mikey. Very good video. It would be nice if you explain the colour wire where they get connected from to where. Many thanks in advance.

The web address on their site does not open anything....

Thanks. I need a 2 contact male/female adaptor plug for my new headlight.

i need a 100mm julet 2 pin male to female connector, where can i get that?

my julet cable melted, which one can handle 1000w?

Sorry sir...I want to cut the engine cable that is horrible whitout jacks and put two new connectors so i can change the back wheel free...u think It' s possible...

Hi I own a 500W Samebike and these bikes do not have a connector in the controller/hub motor cable. In the event that one needs to simplify the detachment of the rear wheel, which Julet connector is the one to order ? Thanks

The best a man can get

What are the spec of the connector shown in the thumbnail? I need that one Pls help!!!!!

Great, now when we need to troubleshoot/test the hall sensors and motor phase wires we either have to open up the controller to find where the wires terminate, or do permanent damage to the cable outer jacket to tap into the wires. This makes troubleshooting take so much longer.

Hey Mikey, The Julet on my Pulse zr2 has snapped now my bike doesnt work, There is 11 wires going in and 8 wires going out, how can i connect these wires with a crimp wire connector ? Or do you think there is a better solution. Thx

Where can i buy julet connectors in India.

I need a 9 Pin Conversion Cable for my ebike motor. How do I know what pin goes where ?

How should you separate Julet connectors so that checks can be done (on a non-working Swytch bike).

Hey I need help. Most ebike wheels are not in julet connector but I need it in julet. Will that work to convert it? Please let me know asap

Nice video. My three ebikes have Juliet motor connectors.

Do they sell direct to the public? Looking for a waterproof connector.

Don't leave me hanging handshake 😁

My wife's connector broke inside pins connection

How much are the people in china getting paid to make julet connectors

Ali express has the wires I just saw $15?

I broke my connection wire beetweent the screen and wireingloom to the bbshd moter can I cut them off and joint them together

I have them

Hello Mikey, are you able to share with me the factory' s contact, I need to make a lot connector for my project

Connect it and disconnect it few times and it will brake...

OK

You cut our FAT-AWD bike🧐

when you don't know the answer to a question you just don't reply is that how it works??

So basically all you said is that you like them.

common courtesy is to at least reply with a DONT KNow

I need a front and break light so drunk drivers do not run me over. This vid is not helpful for that.