ECHO PB-500T Blower Ignition Problem 

I know it's three years on, but your video helped me to establish that the coil on my blower was at fault (PB-580T). I found that the primary was OPEN - no circuit at all. Replacement went in without issue, and the unit now starts and runs just fine. Thanks! (While i could not get the "Service Information" sheet for my unit - or any other, for that matter - the Service Information sheet you showed on camera was also of assistance.) Thanks again!

Great Video, I logged onto the Echo website and I could not find the service data file you had discussed, where on the site can I find the service data for the PB-580T blower?

Thank you for the video. After checking my coil. It's bad. Called my power equipment supply. Echo has life time warranty on their coils.i have one coming for free.

Excellent video thanks for taking the time to make it.

Fantastic video. I fixed mine by watching your video. You know your stuff. Many, many Thanks. I was ready to trash it and purchase new. Thanks

Thanks for heads up I have one I'm dealing with

Real helpful video 💯

I'm working on a pb-500t as well and when I performed the test you did at 6:50 I came up with 15.9. At 6:22 you mention that a proper reading for the coil is 160 to 200. Given that do you think that the coil in my blower is bad?

Good video but a 3 point spark tester is a quicker way especially if the coil has a rev limiter a multi meter sometimes will not diagnost rev limiters in coils

I'm working on same model blower. When I put red lead to plug wire & black to ground it reads 2.7 same as the two before. I'm stumped with it. Will throw one spark occasionally then nothing. If I switch on then back off it throws one spark & that's it. I've changed/ ordered two coils now & doing the same thing. One spark. Has me aggravated I've check switch, wire continuity, plug is new, everything.

Would you tell us where to get the ignition coil specs for a PB Echo 580t Leaf Blower?

he said "bi-sexual screw"

You can kill a lot of time with the wrong diagnosis, some times the engine is not breathing.

When the engine don't have the speed and the power, check the muffler screen and the ports first.

Good equipment, but this video bored me.