Edelbrock Pro Flo 4 Unboxing

Подписаться 1,8 млн

Просмотров 84 тыс.

50% 1

I decided to go with the Edelbrock Pro Flo 4 System for my #ETCGDadsTruck engine. I liked that it was a ‘complete system in a box’ that I could adjust from the drivers seat via the supplied tablet.
I hope this video gives you some insight into what you’ll find inside the box of an Edelbrock Pro Flo 4 system.
Camera: Brian Kast, Eric Cook
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: ru-vid.com?su...
Summit Racing: www.summitracing.com/redirect...
Thanks for watching!
Links
Edelbrock Pro Flo 4 EFI (as seen in video for SBC): www.summitracing.com/parts/ed...
Edelbrock Pro Flo XT(SBC): www.summitracing.com/parts/ed...
Pro Flo 4 Installation Instructions: edelbrock-instructions-v1.s3....
Other Parts I used on my truck
Fuel Pump: www.summitracing.com/parts/ae...
Fuel PSI Regulator + Gauge: www.summitracing.com/parts/ae...
Ignition Coil: www.summitracing.com/parts/ms...
Related Videos
Holley Super Sniper EFI Unboxing: • Holley Super Sniper EF...
Retro Sound Santa Cruz Radio and Speaker Unboxing: • RetroSound Santa Cruz ...
383 Stroker Engine Parts #ETCGDadsTruck: • 383 Stroker Engine Par...
#ETCGDadsTruck Playlist: • #ETCGDadsTruck Build I...
Bendpak Lift XPR-10A-LP Introduction: • BendPak XPR-10A-LP 2 P...
Grey Pneumatic Socket Review: • Grey Pneumatic 81635MR...
5 Things You Should Know When Building a Turbocharged Engine: • 5 Things You Should Kn...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Авто/Мото

Опубликовано:

24 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 209

@Motor-City-Mike 4 года назад

Definitely good stuff! I had occasion to use a wide variety of aftermarket engine parts/assemblies while in business - and there are very VERY few products that are consistently made correctly, fit correctly, assembled correctly, are ready to install out of the box, and perform as advertised, and one of those few companies that deliver as promised is EDELBROCK! Well done ETCG!

@NoobMechanic 4 года назад

Hey Eric.... Thank you. You are one of the creators that inspired me to start my channel. I am grateful. For everything you do, thank you.

@ericthecarguy 4 года назад

Thanks! Good luck with the channel.

@mantistobogganm.d.1496 4 года назад

subd

@anthonyroller8175 4 года назад

I subscribed

@NoobMechanic 4 года назад

@@anthonyroller8175 Thank you!

@caseygunn9627 4 года назад

What a kit!! Thanks for the video.

@ctscantechnologist 4 года назад

Cool video. Ive always wanted one of those for my mid 70s small block chevy.

@alf9868 4 года назад

Looks like a great system. I was considering the Holley MPFI system for my SBC but at half the cost I am now considering the Edelbrock system.

@JoesAutoElectric 4 года назад

We installed the other version of this unit on a 67 Chevelle SS. 496 ci 13.5:1 compression. System has the tunnel ram style manifold, and absolutely doesn't miss a beat. Very nice kit. Well thought out design and does exactly what it is meant to do. The Chevelle is also an E85 fuel so, no issues at all. Only needed to increase the injector size a bit to compensate.

@10mmfan 4 года назад

I can’t wait to see how it performs.

@rusty6666 4 года назад

Nice intake Eric cant wait to see the performance of that that when all said and done one the ETCGDads Truck ....

@m.pietro9087 Год назад

I’m falling in love with this EFI. I think I can go for it in a near future.

@BigDog50001 4 года назад

Looks pretty sweet there Eric!

@benzmansl65amg 4 года назад

Looking forward to the installation!

@ericthecarguy 4 года назад

In a way it's already been installed. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h7qowMqZXRA.html

@JonBecker81 3 года назад

@@ericthecarguy weird. The order of videos is all out whack and it’s messing with my head. I can’t believe I’m so late to the ETCG party. Glad I finally found you though.

@AntonioClaudioMichael 4 года назад

Very nice unboxing Eric

@TheBeerBox80 4 года назад

I do like these unboxing videos.

@danboutin8700 Год назад

Great video!!!! Now to watch the install on your Dads truck!!! 👍🏻as always!!!

@Foxedup 4 года назад

That would be nice under the Christmas tree.

@AntonioClaudioMichael 4 года назад

Very nice kit

@musclebone7875 4 года назад

Another EFI project!

@yambo59 4 года назад

Edelbrock make nice quality stuff, back in the day ive seen more than a few of their Carter clone 4 barrel carbs and they were so easy to set up and tune especially with the electric choke. Holley on the other hand seemed to be way more finicky and always seemed to require re-jetting and lots of playing around to get them running right. Far as I know these Edelbrock intake setups are easy to get going and are virtually trouble free once set up. What a well thought out nicely engineered setup.

@commodore665 4 года назад

the distributor , the olympic flame for petrol heads

@stevealfred3951 4 года назад

Edelbrock seriously needs to rethink their packaging within the box. I was so surprised that you didnt have any damage to the fuel rails during shipping when you pulled the box top off. Some dense foam or something that would would keep the intake from moving around inside the box. I ordered rotors last week and UPS had to send them back due to damage during shipping before I even received them. Seriously, damaged rotors?

@chriss9175 4 года назад

$1800 is just the start, You need a fuel system for efi, regulator, pump relay, 10 micron filter, wires, -6 fittings, and the list goes on and on. So far Im into it $3500! There is a lot they don't mention

@dw8840 Год назад

Unless your vehicle is already equipped with it

@OficinaMasterdey 4 года назад

A caixa super gigante parabéns pelo vídeo canal cada vez mais crescendo cada vez mais

@tech.pro.garage7849 4 года назад

Wow , I like it 😢❤

@cptdavidwebb 4 года назад

SWEET !

@AntonioClaudioMichael 4 года назад

Very nice edelbrock

@turvonc 2 года назад

Just ordered mine

@AntonioClaudioMichael 4 года назад

I bet your dad fell in love with this truck again

@AntonioClaudioMichael 4 года назад

Very nice manifold

@AntonioClaudioMichael 4 года назад

Nice Acer Tablet they provided

@arronkoerbel5932 4 года назад

@ericthecarguy hey just seen your picture on the entrepreneur wall at rosedale. Im in Engines now .. Love the channel man.. #respect

@ericthecarguy 4 года назад

Rosedale helped get me where I am today. Great school. Good luck with your career.

@arronkoerbel5932 4 года назад

@ericthecarguy definitely man thanks

@JB-yc5gc 4 года назад

Great video! Would you mind posting which fuel filter and sparkplug wires you used for this Pro Flo4 build?

@jasonyoung6420 4 года назад

sweet googaly moogaly; pretty cool looking Eric; thanks for sharing.

@DadbrosGarage Год назад

I miss your videos Eric. I hope you start back up soon.

@JB-yc5gc 3 года назад

Great video! Did you have to change out existing camshaft?

@chrisrichardson5841 4 года назад

just ordered the same kit for myself

@toon_on_24s Год назад

Perfect 🎉

@robertclymer6948 4 года назад

Thanks Eric for including the links for the fuel pump and fuel pressure PSI regulator. Is the fuel pump external I hope?

@ms.sammanthalee5156 4 года назад

ok thnks just wondered so how the truck coming along...

@nah6430 3 года назад

I have got to get one for my 78 Lincoln

@ekitching 3 года назад

That manifold setup looks f*cking sweet! I want this system for my 1970 Chevelle SS 454 LS5 but I am not sure if it will clear the cowl induction hood with that single plane manifold. Maybe a smaller air cleaner? I really enjoy your videos Eric, great job.

@AntonioClaudioMichael 4 года назад

That distributor is nice

@phatphred 4 года назад

Me too on the staples. Me too.

@ryan8488 4 года назад

Nice

@sidewaysdanny 4 года назад

Now we're talking! Proper PFI. Even the dizzy doesn't look too bad, although obviously a trigger wheel and coil pack for wasted or even sequential spark would be nice.

@moparproud3978 4 года назад

If it were all 100% Made in USA, the price would be $3k without a tablet

@richwahneEXPERTSmadeEasy 2 года назад

Great unboxing/unbagging video! Question...what is the measurement from the bottom of the manifold (where it meets the china-rail) to the top of the throttle body (where the air cleaner mounts)? Just want to make sure I have enough room under my stock hood. Thanks!!

@gen4ten318 4 года назад

I went with the fitech power adder 600 to save a few hundred bucks. It has fought me left and right since day one. It either randomly doesn't want to start, or won't run after it initially fires. Without touching the settings, its behavior changes from day to day. I'm afraid I'll have to take the hit and pick one of these edelbrocks up soon.

@Vaino_Hotti 4 года назад

That looks nice, currently fighting with '85 Mercury's 302 CFI system

@360fanboy360 4 года назад

my condolences

@jabsjunk2022 2 года назад

Het Eric good video on your dads truck. How is this system doing after some time of using it? Thanks for any feed back.

@chriswiseman5143 4 года назад

Thanks for the video, Eric! I'd really really love to hear your thoughts on how well this system worked. What did you like? What did you not like? Any recommendations for other people who might use this system? Even just a quick few minutes of you sitting and talking to the camera about your thoughts on this system would be great. Thanks again! I love the Dad's Truck project.

@ericthecarguy 4 года назад

I plan to make a follow up video about all the parts I've installed on the truck at the end of the series. I will be going over my experiences with this system in that video. Thanks for your comment.

@markchidester6239 4 года назад

But wait, put that check book away! Also included, zip ties!

@anomamos9095 4 года назад

There’s an App for that! The tablet can be used as a phone if it has wifi and or a cell connection by installing an appropriate application such as Skype

@adventureoflinkmk2 4 года назад

I'd also be worried about the workbench scratching the intake manifold or messing with the clean shiny part...

@dorsk84 4 года назад

This and the auto trans control box have me hoping there is something for my Jeep. '05 and '06 Wranglers can have major issues with there ECU/TCU combo.

@ericriddle467 4 года назад

Man you get the best toys lol

@AntonioClaudioMichael 4 года назад

Lol at the ECU being in bottom of box instead of in the tray

@mikeashford9240 4 года назад

Nice product by Edelbrock so lets see it installed .....

@ericthecarguy 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h7qowMqZXRA.html

@AK-ic1yj 4 года назад

Is only one o2 sensor enough?

@Panhead49EL 4 года назад

$1800. What does everyone think of the price? Of the top of my head that doesn't seem like a bad price. Plus the convenience factor of knowing it's all new and it works together.

@AttilaTheHun333333 4 года назад

I thought it’s more expensive after watching this video, considering the amount of stuff and the quality.

@moparproud3978 4 года назад

Price is 100% on point for what you get.

@alf9868 4 года назад

1/2 the cost of a similar Holley system 👍🏼

@z06doc86 4 года назад

Eric, Dad’s Truck is cool as F*ck. Fine build and you should be proud.

@ericthecarguy 4 года назад

Thanks!

@johnnyhotrod 3 года назад

Eric,any updates on this system? Would appreciate your opinion

@joshgoodson3033 3 года назад

Can you run duel o2 sensor for a true dual exhaust?

@mrbeaubo 3 года назад

@ericthecarguy Did it come with intake manifold bolts?

@TheEVAddict 3 года назад

Definitely get one of these with my stimulus 😂 do you think it will fit under a c3 corvette hood? (Non L88)

@SuperDave21 4 года назад

Very impressive purchase Eric..... I love the looks of that intake. What mpg do you get in the truck with all this? Super Awesome!!

@ericthecarguy 4 года назад

Dad said he was getting about 16mpg when driving on the Power Tour.

4 года назад

@@ericthecarguy I was hoping this would offer 25 mpg.

@mattm2411 4 года назад

eric im lost and i need help 99 accord 5 spd 4cyl clutch pedal was soft and would stay on the ground here and there. never saw any leaks just assumed it had to be my clutch master replaced clutch master cyl which was a pain. now i cant get it to bleed. i used a hose and bottle and theres pure fluid coming out. all air has to be out makes no sense. i think i may have gotten a defective part. i dont know what to do anymore

@TripleTapHK 4 года назад

Hey Eric, what are you using the control your 4L60E transmission? Maybe I have missed in a video where you mention this but unless I am mistaken the Pro Flo 4 systems do not have transmission management built in. MSD module maybe?

@iDrive4fun93 3 года назад

My thoughts exactly, getting vortec heads for my tbi 350 and was thinking about going this route. Was going to go with a Holley Sniper or Terminator but this seems much simpler and more cost effective. But idk how the transmission is going to work if there is no place to hook it up, unless the ECU or harness have a place to plug it up.

@TripleTapHK 3 года назад

@@iDrive4fun93 I noticed after I asked the question, but in the video he has an MSD transmission controller mounted in the engine bay. Standalone transmission controller.

@iDrive4fun93 3 года назад

TripleTapHK awesome, thanks. Guess he would have needed that in the first place if he was running a 4l60e on a carbureted engine, idk why I didn’t think of that before lol

@iDrive4fun93 3 года назад

TripleTapHK for the price of the Edelbrock and MSD transmission controller, you could get a Holley Terminator which has its own ECU, TCM, and programmer all in one system. But then you would need a compatible intake manifold I guess.

@macgroober1396 4 года назад

I'm concerned that there was no packing material whatsoever around the intake. There' was LOTS of room for that thing to bounce around inside that box. That's probably why the plastic ripped off the one side. I hope everything is 100% ok Eric.

@masterofnonetv8361 3 года назад

So it's been a year how is this thing holding up? I'm interested in getting one.

@Diondo26 4 года назад

nice

@FRUMACO 4 месяца назад

Hi Eric. I can’t find the video where you has installed the EFI System. Can you you put a link here please ❤🎉

@azeissler1987 4 года назад

I thought you went with the Holley EFI system again... I done did watch every #ETCGDadsTruck... at least 2-4 times

@adamshowers4995 4 года назад

would this be something better for the fairmount,Eric?

@garyg2318 3 года назад

I wonder if you can get this for a 1970 Pontiac 400?

@bobmcme12 4 года назад

Hey Erik, planning on doing any LS swaps soon?

@ericthecarguy 4 года назад

At some point yes. The LS makes stupid power cheap. It's time I embrace that. However, I have sooooo many projects I want to do. It's hard to decide what direction to take. It'd be a lot easier if I had an editor. That way I could focus more on shop work rather than spending a bunch of time editing stuff. It takes forever. Thanks for the comment.

@gizmothewytchdoktor1049 4 года назад

the progressive linkage may have been an effort to replicate the intake honk of a four barrel perhaps? that is quite thw signature sound for a rod engine. average retail numbers... all in one kits are like 7-11's being convenience stores with the wallet hit at 3am. good morning.

@prevost8686 4 года назад

Gizmo Thewytchdoktor actually the SBC only needs the secondaries for WOT conditions.

@twinturbotaj 4 года назад

the one for vortec heads is even sexier

@dw8840 Год назад

So this doesn't come with a monitor like the Holley does? Also is that an air gap intake they provide in the kit?

@luciogutierrezjr2452 Год назад

Do they make a black distributor cap for this unit? My engine compartment is blacked out, no red at all.

@R24_obs Год назад

I have a 89 chevy c1500 with a 350 would it be hard to make everything work with it Dakota gauges ?

@TheMoldyOne 4 года назад

I got the xt and it doesnt come with everything needed I had to get a water sensor plug because they have two areas for the water sensor and I had a list of little things needed like their gaskasinch thing totally spelling that wrong to lazy to use google and such But it runs great till after 4 hours the o2 sensor stopped working and for some reason theirs cost 250$ to replace I got them to do it this time put they had a tantrum about how their is no way it could of been defective.

@edpoisson7065 4 года назад

What?! no Edelbrock sticker for the back window?

@ericthecarguy 4 года назад

🤷‍♂️

@jackieliner3812 4 года назад

Ed Poisson i5 comes with stickers lol

@connorbrown5613 2 года назад

Hey Ik this comments a lil late, hoping someone will see it and be able to help me out, I was looking at getting this and putting it in my 89 350 only thing is it’s says it’s only for pre 1986 obviously you made it work I was just wondering how much wiring you had to do and how hard it was thanks

@richardgary7245 Год назад

how wad turning your engine with this system

@jackieliner3812 4 года назад

I put this system on my ford 445 FE, the fuel pressure sending unit is about useless, cause on the tablet it reads 138 psi, I called and they told me that it’s not the correct pressure and not to be concerned about it if it was running correctly, I had a few issues getting the idle right, I’m thinking it was probably due to the radical cam,also I used their self contained fuel slump system, nice system, but i had to run a vent line to the fuel tank. Also the distributor gear is composite so it’s compatible with roller cam or non roller cam

@ericthecarguy 4 года назад

Thank you for that info and input. As you'll see in Fridays video, set up wasn't so easy for me either.

@Roarman57 4 года назад

The look in his eyes says he had been cut before😏

@krzysiekv12 4 года назад

Seems edelbrook sent this to every youtuber

@antoniosmith6703 4 года назад

Wondering could I ditch my spider injection, restrictive intake, and weak mini injectors for one of these setups and wake up my 97 Vortec 2 door tahoe a bit🤔? Definitely looks like a nice piece.

@EdelbrockTV 4 года назад

The issue would be that our system would not work with your stock dash or anything. Why we recommend this for later model vehicles but it would work on a 97 Vortec.

@antoniosmith6703 4 года назад

Understood. So I’d need a separate trans controller, would a Dakota digital fix my dash issue? You guys products are the best!!! Are there plans In the works for a similar system that would be compatible with my truck.

@codyyellott117 3 года назад

Just ls swap it

@AttilaTheHun333333 4 года назад

„from foreign and domestic parts“ ...Is guess that tablet is a foreign „part“

@jmh7884 4 года назад

What is better that one or a tunnel ram?

@ericthecarguy 4 года назад

Depends on the application. Tunnel ram is good for bottom end torque.

@julianaguilera8900 4 года назад

What kind of fuel pump did you upgrade to?

@ericthecarguy 4 года назад

Link in the description.

@EricErnst 4 года назад

Primo stuff

@jeremyjenks 10 дней назад

his name is Eric the car guy

@johnnygarcia5693 4 года назад

Hey Eric I have a question I recently bought my dream car on offer up a 1960 ford Thunderbird but it has a toasted 352 but I also have a 1984 Mercury cougar with 76,000 original miles on a 302 5.0 would it be worth it for me to use the the 302 in the Thunderbird depending on minimal modifications or would the 302 not be powerful enough to pull the weight the Thunderbird is about 400 lbs heavier but the 352 is 250 lbs heavier than the 302 I'm hoping to use everything I can out if the cougar if I can if not then I'll have to shop for a 390fe

@NaveenKumar-oj7xh 4 года назад

All that was meant to be one sentence?

@johnnygarcia5693 4 года назад

Naveen Kumar was I talking to you

@bartholomewroberts8493 3 года назад

mine didn't work right out of the box and edelbrock wasn't any help. before you think i did something wrong after a week of jumping through their techs hoops it started working like it should. it worked great for about a 100 miles now its back to running rough. again they dont seem to want to stand by their product

@samsquires2877 4 года назад

I like that your using MPI and it looks nice. But this might sound crazy but I’m not really a fan of the 4 barrel look on the throttle body. To me it doesn’t go with the era of that truck because none of them were carb. Nice setup though.

@ericthecarguy 4 года назад

They were TBI which looks very similar to a carburetor. See the episode where I pulled the engine.

@RacerJames76 4 года назад

Ermahgod you say it wrong Eric!!! It’s not elderbrock. Edelbrock!!!!

@Panhead49EL 4 года назад

lol, chalk it up to major sleep deprivation. A t-shirt that looks like an Edelbrock logo but says Elderbrock would be funny.

@adamweaver6351 3 года назад

This intake could help an lt1 guy put a overhead supercharger on top huh?

@jmh7884 4 года назад

Can use the tablet as a GPS unit for the vehicle?

@ericthecarguy 4 года назад

Not likely. No cellular connection. However, you can use any tablet, you just need to load the Edelbrock software onto it. In fact, I'd recommend it. The Acer tablet is very slow. They make kits that don't come with a tablet that are less expensive.

@adventureoflinkmk2 4 года назад

@@ericthecarguy is it possible to load it on your phone so you can still use the GPS?

@ericthecarguy 4 года назад

The Edelbrock app, is just that, an app. You can load it onto any Apple or Android device. You don't need the tablet shown in the video. In fact, I'd recommend a better one as this one is very slow.

@225Kristoph 4 года назад

Didn't that truck already have an EFI installed?

@ericthecarguy 4 года назад

Yes, but it was a weak sauce TBI system.

@vendetta989 4 года назад

Wish it had an option of coil over plug and a distributor delete.

@buttercupstruelove340 4 года назад

I wonder if a crank trigger system could be adapted to work with the Edelbrock EFI, since the ignition advance is handled by the ECU. I like coil-on-plug ignitions but on a Chevy the coil placement would be close to the header tubes and would be vulnerable to heat damage. You could mount the individual coils further away and run short lengths of spark plug cabling but that would negate some of the benefits of coil-on-plug. The Edelbrock system seems like the simplest plug-and-play solution.

@vendetta989 4 года назад

@@buttercupstruelove340 you can build a bracket that mounts over the valve cover and away from heat. I think that would be possible, and coil per spark plug will benefit the coil build time... just my thoughts, I could be wrong

@buttercupstruelove340 4 года назад

@@vendetta989 That would be a beautiful ignition setup and still maintaining quick and easy spark plug changes.

@Motor-City-Mike 4 года назад

Samuel G While that would definitely be a step up there's nothing particularly "wrong" with distributor/single coil ignitions. The entire reason the factories and then the aftermarket went to coil on plug ignition is to prevent a POSSIBLE misfire - cars are held to emission's standards for 100,000 miles, coil on plug lessens the possibility of that happening if maintenance is ignored. A properly maintained distributor ignition can equal the performance if properly maintained. Way back in the "dark ages" we ran points distributors well past 7500rpm without misfires, the trick there was avoiding point bounce - that took frequent point set changes and high tension on the point spring, but it did work. technology makes life SO much easier! Just a heads up.

@Motor-City-Mike 4 года назад

Buttercups True Love It most certainly could be modified to use coil on plug - but there's so much more the system would have to do that it would cost a lot more. On an engine like this - or any V8 that originally had a distributor - it would still need the bottom half of a distributor, 1st to drive the oil pump and then to tell the ECM which coil to fire and when. The ECM on distributor ignition is told to fire the coil by the distributor, and then the rotor points to the correct cylinder to fire. Coil on plug uses a cam and crank position sensor, from their pulses it calculates which coil to fire - this requires a much more sophisticated ECM and those two sensors - adapting those sensors takes a bit of work. Chrysler/Jeep did just that on the 4.0 online 6 - they added the crank sensor back by the flywheel and used a single pulse from a sensor in a "stub" distributor for the cam pulse. (the distributor runs at the same speed as the camshaft). A lot of work to do at home. There are systems made (F.A.S.T. is one company) like that, but they're MUCH more expensive!

@JohnnyRebKy 4 года назад

Unless I’m building a long term daily driver ( which may happen at some point) I could never justify the cost of this. Of course I’ve daily driven carb engines for years with no problem. I don’t get why people think they can’t daily drive them. But today’s gas prices and the potential mpg gain is the only reason I would buy this EFI. I’ve considered for a long time building a Chevy C10 or Ford F100 daily driver instead of buying a new modern truck. In that case I could justify this EFI system. On the other hand the extra 2,000 bucks could just go torward a LS or Coyote engine in the first place instead of EFI equipping a old engine. Also money spent on a 6 speed transmission, whether auto or manual, goes a long way in increasing fuel mileage. Without a modern transmission the EFI will only go so far in regard to mpg. On second thought a tremec 6 speed would be on my list first and perhaps EFI later.