Тёмный

Eduard Messerchmitt Bf 109 G-5 1/48 | The Inner Nerd 

The Inner Nerd Scale Modelling
Подписаться 87 тыс.
Просмотров 75 тыс.
50% 1

Eduard 1/48 Scale Model Aircraft by The Inner Nerd
Instructional time lapse video of the full-build, paint and weathering of the 1/48 scale Messerschmitt BF109 G-5 by Eduard Porfipack as shown by The Inner Nerd
The first part of this video shows the use of Photo etch parts and scratch building techniques to detail hydraulic pipes and electrical cables professionally and cheaply around both the cockpit and wheel bays.
The second part shows surface preparation techniques such as filling panel gaps and seams with modelling filler and sanding them smooth to get a seamless join between parts. Also basing techniques are included in this section using Mr Hobby "Mr Surfacer 1200 & 1500" to prime the surface ready for painting.
The third part of the video demonstrates the black-basing technique used to achieve a pre-weathered look and surface texture replicating that of an aged and worn aircraft. Harder & Steenbeck Evolution Silverline is used at an operating pressure of 15PSI and a 0.15mm needle + nozzle during this process.
Decals follow painting with the aid of Mr Hobby Mr Mark Setter & Softer products. These products allow the decal to form to the shapes and panel lines of the surface which you can see in the video.
Next is the weathering of the model. This is started using Abteilung 502 oil paints thinned to a wash consistency. Then used as panel line wash the oil is applied across the model to achieve a dirty, grimey & worn look.
The final part of the video explains the final assembly of small parts including landing gear, lights, antennas and canopy fitment as the model nears completion. All final assembly is completed with CA superglue.
Items Used
Airbrush: Harder & Steenbeck Evolution Silverline
Needle/Nozzle: 0.15mm
Compressor: Badger 1100 with Anti-Pulsation Tank
Working Pressure 22psi (1.51bar)
Paint: Tamiya Acrylics thinned with Tamiya X-20A Thinner
Brushes: Pure Sable Brush - Various Sizes
Glue: Tamiya Extra Thin Cement/Loctite 406 Superglue
Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges
Music Credit:
5:52 - 9:47 - Reach The Top

Хобби

Опубликовано:

 

2 ноя 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 132   
@edwardquin4464
@edwardquin4464 6 лет назад
55 years ago when I was a kid I remember trying to paint the spinner spiral and the mottling with a paint brush. I would have dropped dead to see a model like this back then. Fantastic!
@demonolithic
@demonolithic 6 лет назад
The only part missing for me is the running of the antenna. It`s like the peeling off of plastic from shiny surfaces to complete a build. Always a relaxing enjoyable experience to watch thank you for posting .
@MrRockhound24
@MrRockhound24 6 лет назад
Amazing paint job. 10 thumbs up. Thanks for sharing 👍
@donrussell1606
@donrussell1606 5 лет назад
Young man, your work is Inspiring. Watching you makes me want to get to modeling again. Perhaps watching your techniques will enable me to be the modeler I've always wanted to be. Thank you
@robertvoss6145
@robertvoss6145 6 лет назад
Stunning work once again . The paint scheme and weathering techniques are first class. The marbling effect you've used has produced a very effective result. Very well done 👍
@livemusicalgarve
@livemusicalgarve 5 лет назад
This guys modeling techniques are off the scale, totally amazing👍
@jlcsr9163
@jlcsr9163 5 лет назад
Absolutely
@mr.modern4419
@mr.modern4419 5 лет назад
A true museum quality build!!! A cut above the ordinary to say the least!!!
@twobyfour
@twobyfour 6 лет назад
Beautifully done my friend. Another sublime finish. A real treat to watch. I`m really enjoying your `marbling` paint style.
@ninjapumkin
@ninjapumkin 6 лет назад
I really like where you have progressed in your video editing. Nice work on my second favourite plane. My first being the Phantom.
@jjab99
@jjab99 6 лет назад
Great skills on display as always. Well done and keep up this great work. Have fun, Joe
@rurushu8094
@rurushu8094 6 лет назад
You're reaching Plasmo levels of mastery, good job mate!
@BennyCFD
@BennyCFD 6 лет назад
Oh give me a break. This guy is every bit as good as any other model builder on RU-vid. Especially in the attention to the most minute detail. The base coat marbling is one of the things that makes his finish coat look great. And this isn't taking away anything from Plasmo.
@twobyfour
@twobyfour 6 лет назад
Ok, I`ll say it.....IN is a more accomplished painter than Plasmo, and I think Plasmo is masterful. Plasmo also knows presentation, he`s a great videographer, that goes a long way in RU-vid scale modelling. But for me IN shows the nuts and bolts of painting. Also, as Yoda might say, "There is another".....check out ScaleModelAircraft, and you have the three best YT modellers going today.
@twobyfour
@twobyfour 6 лет назад
I`ve seem Scale-a-ton but not the others. Thanks man, I`ll check them out.
@Doglover123-b8d
@Doglover123-b8d 3 года назад
Man you’re great at what you do! All I can say is, WOW!
@TheInnerNerd
@TheInnerNerd 3 года назад
Thank you and thanks for watching :)
@wasrio1403
@wasrio1403 3 года назад
I've come back to watch this again. Inspiring work. You are one of the RU-viders who has taught me many very good techniques.
@TheInnerNerd
@TheInnerNerd 3 года назад
Thank you and that's great to hear! I'm pleased the video is helping you with your own work. Thanks for watching :)
@Salvelinus9a
@Salvelinus9a 4 года назад
I have watched this so many times - I love it Thank you
@michaelnaven213
@michaelnaven213 2 года назад
Excellent work!
@TheInnerNerd
@TheInnerNerd Год назад
Thank you and thanks for watching :)
@andrewf.3424
@andrewf.3424 6 лет назад
That is easily the most beautiful model I have ever laid eyes on. Fantastic job as usual.
@gaucher3879
@gaucher3879 6 лет назад
Magnifique, bravo !
@chancerNW
@chancerNW 6 лет назад
That is a simply perfect Bf109. As always beautifully built.
@valiantodyssey567
@valiantodyssey567 5 лет назад
I like your style of making a model kit.Welldone.Beutifull done.Thanks for sharing.
@ravusursi893
@ravusursi893 6 лет назад
Just superb my friend! Well done!
@KruegerleDE
@KruegerleDE 6 лет назад
Stunning!
@theprofessional1610
@theprofessional1610 6 лет назад
I really like how you edited the video this time, and your build looks perfect as always.
@dadoten_4283
@dadoten_4283 6 лет назад
Sehr gute Arbeit 🤘
@sniper59jl
@sniper59jl 6 лет назад
Master piece .... from a Master...!!!!
@petebaez2350
@petebaez2350 6 лет назад
What a masterpiece! 🏆
@waltervangorden5671
@waltervangorden5671 6 лет назад
awesome build!!!!!!!!!!!!!!!
@peterjozsef448
@peterjozsef448 6 лет назад
Just fantastic!
@MAN394631
@MAN394631 6 лет назад
Great work.
@donfoley1590
@donfoley1590 3 года назад
Excellent Job. Items used very useful 👍
@TheInnerNerd
@TheInnerNerd 3 года назад
Thank you and thanks for watching :)
@donfoley1590
@donfoley1590 3 года назад
I'll be watching again 👍👍
@voodoonights1671
@voodoonights1671 6 лет назад
Well done on a nice build. i have built this kit in different markings and love it. Love the split screen and the editing.
@Myfactory62
@Myfactory62 6 лет назад
Great result
@spor07
@spor07 5 лет назад
Очень круто получилось!
@WIDUKINDvonCOELLN
@WIDUKINDvonCOELLN 6 лет назад
That´s not Modelmaking, that´s Art!!! ;-/)
@rifledude303
@rifledude303 6 лет назад
Great job on a really interesting colour scheme! Just did an Eduard ProfiPack 109 myself (the F-4)... they are just such a pleasure to build and work with! A unique Gustav you've created :-)
@loulakion
@loulakion 6 лет назад
also nice video edit, his one !
@MrBMBuilder
@MrBMBuilder 6 лет назад
You did a great job on this!!! I mostly do sci-fi and tanks but after watching your channel I am going to try a plane next year
@tomasperezluis4606
@tomasperezluis4606 4 года назад
Muy buen trabajo!!
@stephanemaniez1850
@stephanemaniez1850 6 лет назад
nice...nice....and nice..... beautiful bf109....
@lothar29
@lothar29 4 года назад
nice work
@wasilee2533
@wasilee2533 6 лет назад
Just godlike!!!!!!!!!
@pirate3220
@pirate3220 5 лет назад
На мой взгляд это твоя лучшая работа.
@TheHollyHandGrenade
@TheHollyHandGrenade 6 лет назад
Amazing work! Really well detailed and you got some amazing airbrushing skills. Love the split screen but id suggest leaving a thin black rule or space between the two so it doesn't confuse the eye too much where they overlap. Cheers.
@gianluigimarino8264
@gianluigimarino8264 4 года назад
GREAT!
@antikytheramechanism7909
@antikytheramechanism7909 2 года назад
Really looks like aged steel. Good job.
@TheInnerNerd
@TheInnerNerd 2 года назад
Thank you and thanks for watching :)
@kimandersendk
@kimandersendk 6 лет назад
Awesome
@awkward14
@awkward14 6 лет назад
Wow
@matthewrosengren2813
@matthewrosengren2813 Год назад
This is the first time I’ve seen that rivet tool actually be used. I just received mine in the mail yesterday and am anxious to try it out. It’s the Trumpeter brand.
@TheInnerNerd
@TheInnerNerd Год назад
It's a decent tool to have, especially with the various blades that came with mine. I do find that the wheel can be too big for tighter radius' though so the SBS rivet tool is better for wing roots for example. Good luck with yours and thanks for watching :)
@rossanderson78
@rossanderson78 6 лет назад
Subscribed!
@anthonytauriello4975
@anthonytauriello4975 6 лет назад
Magnifico
@modelnut
@modelnut 6 лет назад
Another beautiful & well executed build, always a pleasure to watch. I would love to see a Russian subject built Mig 3 or maybe a IL2, La5/7 or something modern? Only a suggestion. Thanks.
@slavomirmiroslavovic3466
@slavomirmiroslavovic3466 4 года назад
like it much
@royking7304
@royking7304 4 года назад
I doubt you're going to be looking at these comments now but something that I would like to tell you for the future is that world war two fighters of any nation except for the Japanese did not have seat cushions so your green putty is not necessary. Pilots actually sat on their parachutes as a seat cushion. It probably doesn't matter for a scale model but I just wanted to try to share some knowledge about this topic. The model is amazing and I hope you keep up the incredible work.
@christiankirkwood3402
@christiankirkwood3402 3 года назад
... such a generalisation... you don't think SOME guys were shorter in the torso /upper body... or had shorter legs while still meeting the criteria for size and weight allowances... or that a 'chute, unused for year's, handled regularly, wouldn't compress to necessitate the need for extra padding... regardless, you don't think that a parachute may not be the most comfortable thing on it's own under your arse a few times a day, day in, day out... get real... you'd have to be a gamer or someone with absolutely no working knowledge of machines like these things... I drove 1750 - 3200bhp Diesel Locomotives for a lot of years and they have the beat seats - like an airline pilot's couch... yet you're bum still hurts from motion and the amount of time sitting... what a crying shame idiots like you comment with such all encompassing notions, disregarding artistic licence, imagination and insight into reality...
@royking7304
@royking7304 3 года назад
@@christiankirkwood3402 I understand what you're saying. However, a chute would would not be unused for a year in fact pilots often repacked them every day to make sure of their reliability. I am sure, as you say there were some instances where pilots needed a bit of extra padding to see over the nose of the aircraft but I am sure that that was very rare. For the 109 in particular the fuselage was very small which meant that pilots were almost never unable to see over the indicator panel. In fact it was so cramped that most pilots over 5 foot 10 would be transferred to bombers because they were too big to fit in the cockpit of 109s and 190s. I agree with you that parachutes wouldn't have been comfortable to sit on but they did it out of necessity because it was the only place it would fit because of how small the cockpit was. If they wore it behind them they would be too close the instrument panel. Lastly, my gripe isn't with the build or the artistic liberty he takes. In fact I love Inner Nerd's builds its just a slight bit of knowledge I wanted to share.
@christiankirkwood3402
@christiankirkwood3402 3 года назад
@@royking7304... you make a good point but if you think in an idiot who thought that pilots of these aircraft's actually wore a 'chute on their back... c'mon, I'm an amateur historian, I'm 58 years old, been building scale model aircraft for 50 years and know my onions... you don't have explain visibility issues over instrument panel combing or cowling's... I related to size and weight restrictions, also body type... my grandfather flew his 40 in a Lancaster Mk1 with 460 squadron and I know those guys had 'riggers' who regularly re - packed and checked 'chute's... but a chute that is sat on day in, day out, no matter how regularly repacked, would ALWAYS pack to the same dimensions, even tighter and... lessor being squashed into the conformity of a pressed metal couch... you fail to think laterally or want to embrace any train of thought other than you're own... opinion - just remember the "Spitfire Rule" - for every one, there is an exception... kindest regards to you sir :)
@royking7304
@royking7304 3 года назад
@@christiankirkwood3402 I don't think your an idiot and I hope you don't think I'm an idiot either. Thanks for the conversation. Kind regards to you as well.
@christiankirkwood3402
@christiankirkwood3402 3 года назад
@@royking7304... further to tour point about alluding to the notion that I was labouring under the misapprehension about pilots of this type of fighter aircraft actually wearing a 'chute on their back... mmm... you know, sine Spitfire pilots couldn't even do up the harness once in the Cockpit... they often times literally threw the' chute into the 'tub' and did their best to work their way into the harness and seat harness during the scramble...taxi... take off and climb... most pilots hoped they would be able to nurse a shot up aircraft to any sort of landing than actually bail out... something considered as being, albeit necessary in circumstances, extremely dangerous... a weird juxtaposition, yet reality at the time... I, too, deal in reality... again I offer you my KIND REGARDS :)
@Gastello100
@Gastello100 6 лет назад
Вот это "лепешку" фриц отложил, да еще по всей кабине размазало :))))) Шутка, шикарный мессер!!!
@chrissheppard5073
@chrissheppard5073 6 лет назад
Impressive build. Did you go to the Tamworth show at the weekend?
@erinfogerty3843
@erinfogerty3843 6 лет назад
Beautiful work. Suddenly, I have an urge to either tackle a Spitfire, or a Flying Porcupine (B-17). :)
@alvinsmith5346
@alvinsmith5346 6 лет назад
Flying porcupine... You're thinking of the Short Sunderland. That's what the Germans called it.
@huzzism
@huzzism 6 лет назад
Great model. Is the gunsight missing?
@luizantonioferreira6497
@luizantonioferreira6497 4 года назад
Show de bola
@tomasperezluis4606
@tomasperezluis4606 4 года назад
Por favor!! De donde has sacado las plantillas del camuflaje? Las has bajado de internet? Si es así pásame el link
@rickybrett9100
@rickybrett9100 5 лет назад
Great build. How did you do the antenna wire that runs from the cockpit to the tail ??
@TheInnerNerd
@TheInnerNerd 5 лет назад
I use fishing wire attached with a small blob of CA superglue. I recommend using CA accelerator/activator to speed the drying time as its a bit of a pain
@staredsky
@staredsky 4 года назад
Well done and... good luck with the ASK chipping solution, lol
@steinskotmyr2194
@steinskotmyr2194 Год назад
Very professional indeed. NOTE: The swastika on the tail shall not be parallel to the vertical stabiliser leading edge, but rather like it is hanging from a rope. (The corners shall be true horizontally and true vertically)😊
@TheInnerNerd
@TheInnerNerd Год назад
Thank you and thanks for watching :)
@jluisbalderas6222
@jluisbalderas6222 4 года назад
Están perros los videos
@Xerpaa
@Xerpaa 6 лет назад
Awesome job as always! I have two question if you dont mind: 1- Usually in your videos, you do: 3 gloss layers - decals -3 gloss layers - sanding decals with p2000/3000 - Tamiya polishing compound all the surface. But this time, you didnt use the polishing compound, why? Is not required? 2- Didnt you use a matte coat to finish the model? You usually do it also in your videos, but this time it didnt appear. Thanks and looking forward for your next videos, cant wait! :)
@TheInnerNerd
@TheInnerNerd 6 лет назад
Sergio Paez Thank you. Yes I used the same process as my other videos in terms of clear layering and polishing. I left out the info on this video as it can be seen on my others. Also I wanted to keep the video time short
@MIKI17008
@MIKI17008 2 года назад
Cool
@TheInnerNerd
@TheInnerNerd 2 года назад
Thank you and thanks for watching :)
@ericbadia5
@ericbadia5 4 года назад
Where did you find out these prints camouflages in 1:1:48? Need it to paint my recent bf 109 and spitfire. Thank you. Great job
@TheInnerNerd
@TheInnerNerd 4 года назад
I got them from Eduard. They do pre cut masks for the Erla scheme there. Thank you for watching 🙂
@rickybrett9100
@rickybrett9100 5 лет назад
Great build, just a question. The camouflage on the wings you gave a feathered edge but I assumed the splinter pattern on 109s was hard edged ???
@TheInnerNerd
@TheInnerNerd 5 лет назад
Thank you! And the splinter camo as far as I'm aware has a slightly feathered edge. I may be wrong but this particular aircraft was resprayed from number Black 18 to White 2 so I assume that the camo would be hand painted over the original masked version from the original scheme
@rickybrett9100
@rickybrett9100 5 лет назад
@@TheInnerNerd thanks for the reply. Quite difficult to know then. If I was doing a bf109 that was factory fresh could be hard edged but repainted might not be?. The schemes you get in the eduard packs always show hard edges for the wings and soft on the fuselage. I get the feeling theres going to be plenty of different opinions on this. I had the same issue when I did spitfire with many different opinions on it
@youwolf13
@youwolf13 6 лет назад
What is the spray technic you are using, 'dot-like', even for larger surfaces? is it your own method that you came up with or something you heard to recemble reality better?
@jlcsr9163
@jlcsr9163 5 лет назад
It's called Black Basing
@vitahobby
@vitahobby 6 лет назад
Нормально так немец на сиденье наложил, наверное наши напугали ))) Вообще то сиденье должно быть пустое.
@TheInnerNerd
@TheInnerNerd 6 лет назад
Виталий Vint Using my imagination with that one. A scratch built cushion is hardly inaccurate...
@vitahobby
@vitahobby 6 лет назад
It's not a pillow, it's a parachute. He was dressed on the body and did not lie in the seat. i33.fastpic.ru/big/2013/0811/f8/89d9e370eccebe25bb3d86bb21a412f8.jpeg The model is very good.
@danielledoyle434
@danielledoyle434 4 года назад
An impressive job, Nerd. Why do I find planes so much harder to do than armoured vehicles?
@TheInnerNerd
@TheInnerNerd 4 года назад
Thank you. I find armour easier too, I put it down to aircraft having an interior and landing gear. Smaller parts than that typically found on armour models making them more delicate. Also the weathering on aircraft is trickier too I find because its has to be more subtle and uniform than on a tank for example
@Phil_the_pain
@Phil_the_pain 5 лет назад
hey man what item do you use for cover the cockpit?
@TheInnerNerd
@TheInnerNerd 5 лет назад
I assume you mean to cover the cockpit whilst painting to protect the inside from over spray right? (8:17) .It's Tamiya masking tape
@Phil_the_pain
@Phil_the_pain 5 лет назад
@@TheInnerNerd thank you for the answer
@donoteventry4298
@donoteventry4298 6 лет назад
Hey!!!! I have a challenge for your next video!!!! try to make the Guillows SE5A or the Fokker Dr.1 its all made out of wood and paper like a real ww1 plane!!!! BUT since its made to be a flying model the piece are no perfecly modeled and need be remake. SO HERES THE CHALLENGE: make the plane and try to make it look as realistic as possible and try to be able to make the prop spin (can do that with the airfix Electric engine)!!!!! Good luck and have fun!!!!
@rurushu8094
@rurushu8094 6 лет назад
DoNotEvenTry Ugh, you again
@donoteventry4298
@donoteventry4298 6 лет назад
Chin Chin The Dark Lord yeah is there a problem
@TheBornDrunk
@TheBornDrunk 6 лет назад
Outstanding work, looking awesome! Can you share your paint mix and air pressure for mottling/marble coat? I assume its about 1:3 paint:thinner and around 1 bar pressure, for tamiya? I tried marble coating but it resulted in splashes :/ Thanks
@TheInnerNerd
@TheInnerNerd 6 лет назад
TheBornDrunk Yes around 1:3 thinner as you said. I run at 22psi and 0.15mm needle. If it splashes you are either too close or paint is too thin
@TheBornDrunk
@TheBornDrunk 6 лет назад
The Inner Nerd Thanks, ill give it a try again (hopefully will start that fw190 d9 someday), however, I never had luck with Tamiya, no matter how I mix it always have issues when it comes to accurate lines. Mr.Hobby (gunze) was my solution here. Thanks for the tip
@philoshaughnessy906
@philoshaughnessy906 6 лет назад
Beautiful job. Please can you tell me the make of the model?
@TheInnerNerd
@TheInnerNerd 6 лет назад
Phil O'Shaughnessy It is made by Eduard. The kit detail is on the opening page 👍
@williamholmes9195
@williamholmes9195 6 лет назад
Would pay you to do a model for me :) the 1/48 Tamiya Corsair in VMF-214 markings. :) Love your channel. Keep up the great work!!
@TheInnerNerd
@TheInnerNerd 5 лет назад
*If you have a commission build you would like me to make* contact the.inner.nerdYT@gmail.com
@sjjo5342
@sjjo5342 6 лет назад
I have a question: why did you use PVA glue to fix the etches instead of cyanoacrylate glue? To the best of my knowledge, the cyanoacrylate glue has stronger adhesive force than PVA. Were they fixed well during airbrush work?
@TheInnerNerd
@TheInnerNerd 6 лет назад
SJ JO For such small parts the PVA was nore controllable to apply. If left for a day to dry thoroughly it is suitably strong to hold through airbrushing and oil washes
@DavidJones-wr3sb
@DavidJones-wr3sb 6 лет назад
I'm building this kit at the moment .I use Johnson clear for the pe parts of the instrument panel .it's worked for me no problem . better than super glue .more time to get it right .it's also use it for the clear parts 😆
@sjjo5342
@sjjo5342 6 лет назад
Thanks, The Inner Nerd. I'll try it for my new model.
@agdgdgwngo
@agdgdgwngo 5 лет назад
I do love Eduard kits, its hard to find any faults in them and with the PE parts and masks very good value. Makes Tamiya seem a rip off and makes Airfix look like toys compared
@TheInnerNerd
@TheInnerNerd 5 лет назад
I agrees, Eduard makes some of the best kits available in my experience. Tamiya seem a little simple and Airfix do feel toy-like unless you spend many extra hours detailing parts to make them look more realistic. Depends what you want I suppose and to what level you want to take it. I do love a good Airfix kit - takes me back to my childhood when I did a really bad job of them but they meant so much!!
@alpteknbaser7773
@alpteknbaser7773 2 года назад
👍👍
@TheInnerNerd
@TheInnerNerd 2 года назад
Thank you and thanks for watching :)
@heavygruby4280
@heavygruby4280 6 лет назад
*looks at my Bf 109* *looks at this Bf 109* *looks at my Bf 109 again* *breaks down* *commits suicide*
@happycongressman1334
@happycongressman1334 5 лет назад
Aleksander Wielki Tez bym chciał sobie taki zrobić ale jak widzę co on tam odpierdala to aż się zniechęciłem xdd
@donrussell1606
@donrussell1606 5 лет назад
I meant to say "Inspiring" damn auto correct. Thank you anyway. I meant well and i fized it
@scanor
@scanor 5 лет назад
remember that the '109 has a seemline on the spine.. it's supposed to be there. you'l see it on the real aircraft
@TheInnerNerd
@TheInnerNerd 5 лет назад
Yes it's been pointed out further down the comments too. The seam is still there but very faintly and doesn't show well in the photos. Maybe a rescribe would make it look more defined
@scanor
@scanor 5 лет назад
@@TheInnerNerd yea, just might. When I build a 109 I never do anything to the seem-line there other than sand it slighly to take out the rough edge. that way it looks natural :)
@christiankirkwood3402
@christiankirkwood3402 3 года назад
Kudos on the build... the musical accompaniment is just terrible... overly dramatic and just a distraction... :)
@TheInnerNerd
@TheInnerNerd 3 года назад
Yes I agree. I've since calmed down the music because I found it too stressful to re-watch. If you check out my later videos you'll thankfully find a much more tranquil soundtrack. Thank you and thanks for watching :)
@christiankirkwood3402
@christiankirkwood3402 3 года назад
@@TheInnerNerd good on you mate! I've subscribed as I enjoy the content and your editing is very good! kindest regards :)
Далее
Eduard 1/48 Bf 109G-5 ProfiPACK (82112)
10:09
Просмотров 2,7 тыс.
СТРИМ ► Elden Ring - Shadow of the Erdtree #4
5:55:46
Tamiya P-38 Lightning 1/48 scale | The Inner Nerd
47:18
BUILD THE 1/48 BF-109 "BLACK 6"
30:39
Просмотров 8 тыс.
The Worst 1/48 Kit I Ever Made? | The Inner Nerd
24:23
Volkswagen судится с Volkswagen?
1:00
Просмотров 1,8 млн
Планы на лето😅
0:23
Просмотров 1,9 млн
Суровый мир тату-бизнеса
0:15
Просмотров 2,7 млн
Малыш круто водит🤔
0:18
Просмотров 2,4 млн
деревня.лето.юность.эх
1:01
Просмотров 893 тыс.