Alam nyo sir malaki natutulong nyo para sa mga pinoy ! Ang mga content nyo ay talagang dyamante ! Pagpalain ho kayo Sana madami pa kayo maturuan Para nmn sa mga natututo at nanood tulad ko blessed tyo kase may gantong tao kaya sana wag nating pagdamot ung kaalaman sa ibang kapwa pinoy , pra hindi nmn lage unggoy ung tingin saten
ur really good man. is this what type of metal u do for a living? our trade is dying. most companies purchase these elbows instead of doing themselves. if they do fabricate these themselves then the plasma does all the layout. our trade is dying its ashame
Bai, gawin mo nga ang tatlong dahon lang niyan na makuha ang gitna niya kasi gumawa ako tingala sa tatlong dahon...sakto naman siya sa 90 degree crinoss triangulate kolang pagkuha yung gitna
The method used is wrong and you only get away with it as the taper of the cone is slight. lines one and 5 are true lengths but 2, 3 and 4 are not and need projecting to line 5 to find their true length. A lot of teachers get things like this wrong as they can get away with it due to there being little to little difference. The first time I tried I made a similar mistake.
the inner segment lines ( 2,3,4) should be extended to the outer profile lines to achieve true lengths. Otherwise the throat will shrink. Possibly because the 1/5 lines are true lengths this method may still overcome that and 90 degrees is still achieved?....
What you are doing at 19:00 is absolutely wrong ! Reporting height time the length between 4/5 is not equal to the circumference 157 mm ! you ought to report height time the length of the curve between 4/5 ! you merit a ZERO ! Nobody noticed that ?
