Electric Kayak Hoist For HEAVY Kayaks (DIY)

Подписаться 43 тыс.

Просмотров 18 тыс.

50% 1

Looking to get some extra storage out of your garage for those fishing kayaks? Let me walk you through how I used a $48 Harbor Freight Winch and some things around the house to make my Electric Kayak Hoist For HEAVY Kayaks. As always, feel free to reach out with any questions. -Daren
🧰 GEAR REFERENCED 🧰
Badlands 2000lb Winch: geni.us/Winch (Amazon)
3/16th Vinyl Cable: geni.us/VinylCable (Amazon)
3/16th Wire Clamps: geni.us/WireClamps (Amazon)
Wire Thimble: geni.us/WireThimble (Amazon)
24 Volt Deep Cycle Battery: www.walmart.com/ip/EverStart-... (Walmart)
Structural Screws: geni.us/4InchStructuralScrews (Amazon)
Heavy Duty Carabiner: geni.us/HeavyDutyCarabiner (Amazon)
Battery Tender: geni.us/BatteryTender (Amazon)
⏱️ TIMESTAMPS ⏱️
0:00 Welcome to Wendell Fishing
0:13 Two Fishing Kayaks: Native Slayer 10 (65lbs) Bonafide P127 (100lbs)
0:49 Harbor Freight Winch
1:10 Truss Support
1:34 Screw Types and Eye Bolts
2:32 Pulleys and Connectors
3:45 Hang Pulley System
4:12 Carpeting the Support Boards
4:47 Winch Support Board & Test With 24 volt Battery
9:20 Redirection Transition Pulley Install
10:21 Wire Connector Install
11:25 Board Support Connection
12:30 Final Run Through
12:29 Fishing Kayak Lift
CAMERA GEAR USED:
💣 - YakAttack Boomstick Pro: geni.us/YakAttackBoomstick (Amazon)
📸 - GoPro 7 Black: geni.us/Go_Pro_8 (Amazon)
🤳 - Manfrotto Monopod: geni.us/Manfrotto_Monopod (Amazon)
🦍 - Gorillapod Kit: geni.us/Joby_Gorillapod (Amazon)
🎥 - Ulanzi Go-Pro Casing: geni.us/GoPro_Case (Amazon)
🎙️ - Rode Mic: geni.us/Rode_Mic (Amazon)
📷 - Gopro Chest Mount: geni.us/ChestMountHarness (Amazon)
SOCIAL:
👍 - FACEBOOK: / wendellfishing
🕦 - TikTok: / wendellfishing
💻 - Website: www.WendellFishing.com
Wendell Fishing Merch ➡️ wendellfishing.myspreadshop.com/ ⬅️
#WendellFishing
As an Amazon Associate I earn from qualifying purchases

Спорт

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@robertflinn8306 3 месяца назад

Love the build and love that you and your brother did it together!

@wendellfishing 3 месяца назад

100%

@crespinmd Год назад

Now that is a great DIY kayak storage. 🤙🤙

@wendellfishing Год назад

I'm running out of space Matt!

@shannonboatright4894 Год назад

Heck ya!! Awesome job brother!! It looks good

@wendellfishing Год назад

Heck yeah! Thanks Shannon. Appreciate it

@bryanrocha1151 Год назад

You should do more videos with your broski.. he is a rock star.. great idea with the storage lift.

@wendellfishing Год назад

Agreed.. trying to get him to start his own channel.. he is a master at understanding and fixing things.

@markogletree2790 Год назад

Nice video and it looked like a fun build.

@wendellfishing Год назад

Yeah... I always love projects with my dad and brother.

@iproject1850 Год назад

Dude! Your brother is a genius! Plus 1 on him starting his own channel!

@wendellfishing Год назад

Yeah right.. he would do well. I tried to get him to start one.

@gregstabryla9945 Год назад

Good job. I have to store mine wrapped in a tarp on the front porch. If you have a garage it makes perfect sense.

@wendellfishing Год назад

#KayakBurrito

@ericfehr8632 5 месяцев назад

Love the video, I was looking for videos like this to build my own lift for my kayaks. I am going with rope, but in researching cabling, I found something about never saddling a dead horse. You may want to check your cable saddles for proper assembly. It looks like some of them may need corrected. Not sure how much it matters, but though i would relay the information. Your brother inspired me to do things like use the correct eyebolts rather than buying ones from Home Depot that are not meant for the application.

@wendellfishing 5 месяцев назад

Thanks boss.. so far so good but good for those to take into consideration when reading through the comments.

@WendellWoodworks Год назад

Smart minds 👏🏻

@wendellfishing Год назад

Chad was lucky I was there or my garage roof would have fallen in

@FishINwithGRAMPS Год назад

another top notch video!

@wendellfishing Год назад

Thanks Gramps! Appreciate it brother

@DCFloridasport Год назад

Man such a time and back saver, great idea and project, as we get older we gotta work smarter lol tight lines!

@wendellfishing Год назад

I cant tell you how much I love it. I also can't believe that I have gone so long without one

@DCFloridasport Год назад

@@wendellfishing I think Im going to duplicate that for my canoe instead of just leaving it on top of my car rack lol

@wendellfishing Год назад

@@DCFloridasport Your back thanks you in advance :)

@DCFloridasport Год назад

@@wendellfishing 😂 that poor old feller

@wendellfishing Год назад

Amen to that

@hookerd2226 Год назад

I gotta git me one of those!

@wendellfishing Год назад

I can't tell you how much I love it..... I can't believe I waited so long

@lowlifeangler Год назад

Nice build dudes!! Love your DYI vids That would great in the 12×16 shed, we just have the sit ins stacked up. My Tamarack pro stays in the garage. I need a hoist for all of our rods!

@wendellfishing Год назад

Right! Anything with a 10' ceiling or higher would work out great. I need a hoist for my personal best I'm going to catch in the spring

@lowlifeangler Год назад

@@wendellfishing lol , that's a big carp or wells catfish

@wendellfishing Год назад

@@lowlifeangler I will have at least believed for 1 second and it's better to believe for one second than never believe at all

@lowlifeangler Год назад

@@wendellfishing 😂 well a carp is still a fish

@wendellfishing Год назад

@@lowlifeangler barely makes it :)

@flipflop_fishingsuzannetys9617 Год назад

I like. Nice job. But how many beers did that take to finish? 🤔😂

@wendellfishing Год назад

Lolz

@flipflop_fishingsuzannetys9617 Год назад

@@wendellfishing 😂😆 😂😆😂😆

@Rashuge Год назад

just came across this Nice setup other videos I saw had ceiling pulley for each cable, have you had any binding issues with two cables going through the same pulley? also do you have a recommendation on how to shorten the pull distance and keep the same drop distance? would 2 double pulley work to help reduce pulling distance needed

@wendellfishing Год назад

No binding issues at all. The pull and drop distance was negligible in the context of the garage.

@tennesseekayakfishing5691 Год назад

That is a pretty ingenious setup. Does someone have hoist rigging experience? Did you make a stop mark so you know where to safely stop so as not to run the kayak into the ceiling?

@wendellfishing Год назад

Ha! I found the idea on a forum board. Seemed simple enough. Winch from Harbor Freight, Transitional pulleys, and board. My brother is also an engineer so that helped a bunch along the way. All of the materials I had laying around the house or my brother had minus the winch. I didn't make a safety stop marker only because I put stuff on and off the kayak all of the time and I don't want to not be paying attention and ram my seat, or pedal drive through the ceiling. I have a pretty good line of sight to the tops of both kayaks though.

@nateofthenorthoutdoors8018 Год назад

Smart idea! Just trying to share one little note about your batteries? Are they off the concrete? I have heard from many that it will drain your batteries and can ruin them? But awesome idea for sure😅😮😮😮

@wendellfishing Год назад

Hey Nate, the one running the hoist is up off the ground and on a tender.. Should be good to go!