Electric Motor Generator 1° 

Awesome demo. First crank charges the caps somewhat so it runs for a while longer. Nothing as such as free energy coz calories burnt by the human muscles were converted to all sorts of energy in this setup Thanks for the vid

You have to listen closely to see why this is such a great experiment. At first glance one could assume we need simple measurements and comparisons when trying to calculate an efficiency increase. You could say in the present setup, once the system is going and rotating at a certain rpm, it could be externally fed a smaller amount of power to keep it going. That is, a smaller amount than if the system were not self-feeding. Then we could also say, the self-feeding system is causing drag on the motor due to friction and lenz so omitting that altogether should provide a better efficiency. But you can hear the different 'octaves' that thing goes through and there are two ranges that stood out to me. In one gear, a very small one, the system almost sounded like it wanted to start slightly speeding up again, or at least for a very short period maintain a solid rpm with no decline before shifting down again for whatever reason. The next gear was a longer one that seemed to maintain the longest but with less torque. That range seemed to be ideal for keeping the system going with very little external input. While that in itself is no really practical for much reason I can think of at this time, it's still kind of remarkable to me to see some kind of closed system like that in motion dissipating a good deal of energy but have the ability to maintain with a small amount of energy, much smaller than you would rightfully think in a normal situation.

Very good video. Take off the small flywheel, it’s dragging the motor and causing lots of friction. Try making it with the least amount of friction and use a much larger flywheel.

Your videos are calming and almost therapeutic to watch.

I am amazed by the amount of replies & options your experiment raised. Congratulations

Good job! Now hook up two of those to the same battery set. Just as one is losing power start the other. Do this a few times and see what happens.

You really pushed the limits of hand soldering! Great video! Please post more like this.

Все просто, потягнувши перший раз за нитку без підключення мотора - генератор заряджає конденсатори, а діод на червоному проводі включений послідовно генератору не дає конденсаторам розрядитись на генератор. Потягнувши вдруге за нитку - процес повторюється й ще більше заряджаються конденсатори, але підключивши двигун не чекаючи припинення обертів, заряд, накопичений в конденсаторах починає обертати двигун і рух продовжується допоки присутній заряд на конденсаторах. Непогана задумка для компенсації короткочасних перегрузок при довготривалих холостих пробігах привода.

finally an honest experiment.....

C'est vrai ! Belle démonstration d'une partielle auto alimentation ! Bravo ! It is true ! Nice demonstration of a partial self feeding! Bravo! Это правда! Хорошая демонстрация частичного самостоятельного кормления! Поздравляем! Es verdad ! ¡Bonita demostración de una autoalimentación parcial! Bravo

VOVE E UM GENIO,ESTA PERTO DE DESCOBRIR A ENERGIA INFINITA,CONTINUE TENTANDO E VOCE CHEGARA LA PARABENS

Very good demo. Your work is always executed to perfection.

Obviously not free energy, but I love that setup!

Nice work... It is needed to be shown to those who wander it as the free energy generator. This is the fact that is going to be in the real life...

The problem is with white string you are using. You need twice thinner and 3 times longer string of black colour. Then it will work. Thanks for video!

Thank you Robert for all those honest experiments. This is a good teaching lesson for all those free energy hoaxes out there. There is nothing like perpetual motion. Ultimately frictional forces get larger and larger and bring things to rest. Even the Earth is timed to stop some years ahead but not in our lifetime.. I wish I had your channel back when I was a kid in the 80's.. I'm reliving my childhood watching all your experiments. Keep up the good work, keep inspiring.

So the friction and resistance become loss of the energy. Good demo. The source of energy is rice and nan.

Nice demo. How long does the motor/flywheel section alone run for if you mechanically disconnect the generator/capacitor bank?

What if you had the motor connected to a crank that moved like 5 or more generators? And they all powered the capacitors?

Good experiment. Supercapacitors acting as an Electrical flywheel.

nice work on the construction

конденсаторы и дроссели умеют сохранять энергию. особенно на определенной частоте. спасибо за иллюстрацию. capacitors and retardation coils can accumulate energy. thanks for illustration.

Good try If you connect a diode in the generator outputs power will flow only in out direction Iike the car alternator and need use a bigger capacitor with low resistance ”Diode ” because generator is made in wire coil and acting at the same time like the big resistance But the thermodynamics law you can't take it out But this is a good project Enjoy

Muy bueno...!!! like saludos desde Argentina Bs. As

First running 8 sec. Second running 45 sec.you are in right direction🙏🙏🙏

Like it, but I don't understand why you didn't do more then this? Just a small mod, and it wouldn't stop.

Thank you Amigo Rooberts!! You showed theres no such thing as free energy....no free lunch...even cat food has to be bought and paid for... ;(

手拉出的動能轉換成電能儲存於電容中，在短暫的釋放後消耗完畢即停止運轉，這完全是一個證明目前的科技無法創造出永動機的實驗!

Try reversing the gear ratio. I wonder if it’s more efficient. Or put the generator on magnetic bearings.

Wow world energy crisis solved imagine making this machine 100x bigger propelling it turn to need 200x energy to start and producing half the energy wow engineering at is finest by the way thanks buddy for entertaing me nice experment

if we don't want to store d energy do v need d capacitor bank? plus in order to make it run for longer time we need to supply d losses externally. so to where we will give the supply?

Marvellous efforts.....

Roberto, I must say you do a fine job of constructing. Glad to see you're growing.

I like your experiment, it shows great potential, and I do believe there is free energy that we can tap into, just have to put the right hardware and software together thumbs up. It dose WORK. Keep The Video's coming. GREAT JOB.

What about a magnet bearing?

You have to put an other motor generator to produce energy for run the motor because capacitor drain all energy or you can put one diode for not to drain voltage or you have to put double the power motor generator to generate enough power for both. Keep it up :)

Hello Robert, long time no see. What have you been up to? Are those batteries or capacitors and are they to provide a voltage?

Great Demo and efficient DC motor :)

really not bad using caps + rotating weights as energy saving components. This can be work for 4 months by good setup. I made one for a long time ago.

No probaste conectando y conectando, uno de los cables ? , para que recupere parte de la energía por inercia , de los volantes y luego volver a conectar, en lapsos cortos . Saludos

plz i want to know if i can use this capacitor arrangement with none super capacitors to use it as battery charger to chargr with higher current

If you remove the generator and just spin the flywheels, it will spin longer. But it is a great experiment.

And now short capasitors before each run.

Recently thought to give it try with the capacitors but... now I saw it. Thanks for sharing

Your motor needs to be chosen to work at a higher rpm than the one you have,and the generator,needs to be chosen also to generate more power than the motor needs ;and in that case you will not be able to start it with the rope;also a biger flywheel will be always better,but the rpm is where the gain starts;probably a motor with double rpm will work.Bigger flywheel goes hand in hand with more rpm,that's why smaller combinations don't work.Good luck!

Hi, Roobert, could you try to displace the two DC motors as 24V DC motor-generator and 12V DC motor ? By doing so the running time may get longer ?

Hello!!!! how long can it be rotating in this way, using the layers

Excellent

I think the super condenser and the flywheel magnet would be nice.

excellent video.

Nice electric fidget spinner. I wish you luck by breaking the laws of thermodynamics...

I love motor generator energy !

Would it not work better with Brushless motors?

Why your attached motor second time

I do not understand where the interest is charging the capacitors in the first attempt and then empty the capacitor because the output of the generator and the engine is less than 1, this is self-evident

mi pregunta es ¿porque no le deja conectado el positivo y jala con fuerza haber que sucede? ya que cuando jala por la resistencia que provoca los engranes las revoluciones han disminuido bastante y se ve que no mantiene...

Wow ! it's so cool ! your idea is use a small motor to start up the generator ? Why just running one minut , I think two heavy flywheels caused, by the way, you need to have it to start up ! ....

Congratulations, you almost make it I`m making the same thing and spent a lot of money doing some experiments

Robert, how about charge up capacitots first, fron external source, then start your machine-generator

Thank for a real project but may u shall change step up speed of generator with alternate gears please ?

İlk defa mantıklı bir video izledim gerçekten emeğine sağlık helal olsun

nice Experiment

E se o motor dos capacitors tiver uma capacidade maior de geração, é o motor d arranque ser um que possui menos consumo? Geria uma carga infinita?

It's similar to the regenerative brake system on electric cars.

Why it is stoping?

Use bigger wheels for weight and maybe a fidget spinner style weighted system. Also you need it rectified.

nice job..,.what if you manipulate the gear size,.mean that,.bigger gear size for DC motor and smaller gear size for the DC generator. So that it will rotate you DC generator more faster and gain more power to your capacitor.,.it might be give you positive result.,.if positive, it can reducing pollution.,.ya..dont so worry about others comment,.,.many invention come from the crazy idea.,.without a crazy idea,.until now we still use a cow n horse for transportation and no aeroplane.,.great job,..

Thank you.

Come on...do you not understand it is not free. What did you use you tool to charge the batteries. One day all people need to understand that you get nothing for free in this life. There is ALWAYS a cost.

Both gears plus bearings is the drag of friction.

Take the batteries out of the equation, let the generator supply the motor.

Can u test this once more but use a DC-DC BOOST CONVERTER WITH IT TO COMPENSATE FOR THE LOSS DUE TO CONDUCTION of DC electricity

buenisimo, por fin algo bueno, es el comienzo

if you use a pwm with 20hz per second only to keep in movement the second motor, and the dinamo keeps producing energy maybe you will do a perpetual machine

This is not fake you do well and think about some ways to make this work and continue thanks

Muito interessante. Lindo projeto. . Basta colocar um sircuito osilador pwm entre os capacitores e o motor. Com Dut. Curtos.

You only had to switch the polarity ,,,the motors were connected positive with positive ,AND negative with negative,,,,,,,,,,,AND in That way it comes to stop cause one of the motor Is TRYING always to move to the opposite direction ,that is the reason it stops,,,next Time try it ,I'm Sure it Is going to work 🙂👍

Please I need help on getting a complete motor set like the one in the video. Please I need response

Nice effort.

NO SUCH THING AS FREE ENERGY. That circuit will always die out. Read your Physics book people!!!

Салам, у тебя конденсаторы в паралеле не успевпют заряжатся ☝️ каждый конденсатор сделай так что-бы независимо друг от друга зарядились через контролер зарядки литионный АКБ тогда они быстро будуть заряжатся и конструкция у тебя будеть работать☝️👍👍👍

Why prove that teach at school? :) "Energy can neither be created nor destroyed; rather, it transforms from one form to another." (Conservation of energy, wikipedia) By the way, "free energy" has a different meaning, this is also explained by Wikipedia.

hi, escuseme why the first time the motor stop ? regard

can you use bigger flywheel?

just a quick question.. but from what i understand.. ( and that is REALLY limited) the motor is being powered by the generator? yes? but the generator can not sustain the power to in turn run the motor indefinitely.. Would it be possible to change the gear ratio from the motor to the generator to a point where it could??? (again if i sound like a idiot its because i have NO idea about the working of electrics) if i pay my bill everything in my house works fine :) but this idea if fascinating. if it had longevity. i hope that question makes scene to you haha,,,

good video!!!

Spettacolare !!!:) Per farlo funzionare all'infinito si potrebbe fare un sistema di magneti, che diano un po di spinta per mantenere la rotazione.. avevo visto il video di un utente che aveva collegato dei magneti alle pale di una ventola per pc e la faceva girare.. Progetto stupendo!!

It's because efficiency of commercial motors and generators is low, often below 54% leading to a continue 46% of loss that results in the end of movement. We would need a 100% efficiency motor operating in the void with no friction

Take advantage of the kinetic mass of the motor ..... use a relay to turn the power voltage on and off

Первый раз, когда провод не подключен, - заряжаются конденсаторы. Когда вращение остановлено, конденсаторы не разряжаются на генератор, так как стоит разделительный диод. Второй раз, вначале раскручивается маховик, что бы не тратить много энергии из конденсаторов, а после раскрутки подключается провод и энергия накопленная в конденсаторах расходуется на поддержание вращения. После того как энергия заканчивается, - вращение прекращается. Никакой свободной энергии здесь нет. Механическая энергия от руки преобразуется в электрическую, а затем расходуется на механическую и все преобразования происходят с потерей мощности, а не с прибавлением.

Muy legítimo. El principio de la auto sustentación

Excelent like, min 2 first charge of capacitor, 2:20 second charge and run, you demostrate te first law of thermodynamic. En el minuto 2 hace la primer carga de los capcitores, invierte la energía cinetica en energia electrica cargando los capcitores, luego enel minuto 2:20 vuelve a cargar los capacitores solo que esta vez conecta el motor a los capcitores, con lo cual lo hace funcionar hasta que finalmente se descargan. Con este video demuestra que la primera ley de la termodinamica.

why you did't charge the cap bank first

So one pull to charge up the caps, then a second pull where you discharge them...

When one truly mediates over this... one sees the path to infinite power. Free energy.... that a little electrical know how.

And now the question is that what if we use the graphene super capacitor?

nice experiment...

where you bought the item

I had a experiment with a magnet motor one time, the dc motor was hooked up as a generator, with pulleys, and the run motor was set up like a wankel wheel. which meant that one pulse from the coil, pushed a magnet on the rotor through the magnetic gate and for a hole revolution it was gaining power. which in turn generated power from the generator into a capacitor with no resistance. i had a reed switch set to sent the power from the generator/cap bank back to the coil..... I really feel with the right gearing or pulley system, i could have got close... the wankel system can spin almost one full revolution without nothing but magnetic force. which is why i said if you gear 1/10 to the generator you could gain some serious power into a cap with no resistance because your not using power your making but one pulse a revolution to force the rotor magnet through the magnetic gate couple of read switches would make and break charge current, and load current.... i couldn't figure out the gearing ration, and the belt drive had so much drag.... but in my head if you could gain enough power with the right gears. you should be able to make enough current in a cap bank to get it through the magnetic gate.. You follow? I stepped away from magnet motor but i have 3phase dc motor with 3phase rectifiers the can make some nasty current. like i said just want to find a easier gearing system. any help?

you need a bank of supercaps bro