Electric Water Heater Installation - Ariston Andris Lux

Подписаться 8 тыс.

Просмотров 102 тыс.

50% 1

We show you all you need to know about the ELECTRIC WATER HEATER.
This is a complete installation guide of the Ariston Andris Lux Water Heater which was purchased from Screwfix in the UK.
----------------------------------------------------------------------------
⭐⚒️Buy Tools The Tools I Use Here ⚒️⭐ - amzn.to/3Yzop0H
💬 LEAVE A COMMENT we would ❤ to help you out and hear your feedback 💬 (We answer all questions)
👍👍 Please show support by pressing the LIKE button 👍👍
&
🟥 Subscribe for more Plumbing & Heating Videos: / @plumbingdoctors 🟥
😎 Recommended Playlist - How To Videos 😎 • How To - Videos
Let’s connect:
🔘 www.plumbingdoctors.co.uk 🔘
🔵 Facebook - / plumbingdoctors 🔵
🟤 Instagram - / plumbingdoctors 🟤
🟣 Twitter - / plumbdocs 🟣
⚫ TikTok - www.tiktok.com/@plumbingdocto... ⚫
⚪ LinkedIn - / plumbingdoctors ⚪
---------------------------------------------------------------------------------
💎 Who Are The Plumbing Doctors 💎
Waseem is the Owner/ Lead Engineer and Curtis is the Apprentice. Plumbing Doctors specialise in Domestic Plumbing, Heating & Gas Work. Waseem decided to focus on creating RU-vid Videos during the first lockdown in 2020 as he wanted to share his knowledge in this industry to help anyone who wanted to learn during the hard times.
We are located in Coventry, West Midlands, UK.
Email: Info@plumbingdoctors.co.uk

Хобби

Опубликовано:

27 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@Carl-re6zb 2 года назад

Nice vid brother. Like the way you even address the social keyboard naysayers who like to nitpick on even the smallest insignificant issues like your using the wrong brush to flux etc... This is real life everyday situations and you do it brilliantly. Your an engineer who to enjoys his chosen profession and has the grace and humility to pass on the greatest gift as a human being.... Knowledge... Keep up the good work bro and thanks for sharing.

@iheggis86 3 года назад

Nice soldering & to see you cleaning up the pipes, many plumbers wouldn’t bother 👍

@PlumbingDoctors 3 года назад

Thanks... That's my fav part lol

@KurtJohnson-qp8qw 10 месяцев назад

This was an exact replacement for the old one that lasted about 10 years. ru-vid.comUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).

@PlumbingDoctors 10 месяцев назад

Never used them

@soothingrelaxology4581 2 года назад

Absolutely AMAZING CONTENT!!! KEEP IT UP SAVING US ALL A LOT IN THESE TESTING TIMES AS WELL AS GAINING BASIC KNOWLEDGE

@PlumbingDoctors 2 года назад

👍🏻👍🏻

@Bobsmith-ot6si 3 года назад

Very helpful thanks for your help 🙏👍

@manjsingh6500 3 года назад

Wonderful workmanship and skills

@PlumbingDoctors 3 года назад

Thanks 😊

@youzulf 3 года назад

A Master Class tutorial.

@PlumbingDoctors 3 года назад

👌🏼

@suheilhanna873 3 года назад

Very helpful, first time on you tube, 👍

@faridratni6799 3 года назад

Very nice video and clean job please do a video about installation of unvented cylinder

@paulclark40 2 года назад

Nicely done video👍

@janekrts Год назад

Good Job thanks for that video.

@michaeloconnor1041 2 года назад

Thank you for your helpful installation video for this heater. I intend fitting the smaller 10 litre under sink model in my son's new flat which does not have gas and therefore all electric. I know that these Ariston water heaters have a sacraficial anode to help prevent the tank corroding. I believe the anode has to be checked annually and replaced if necessary. I have read that if not serviced regularly the tanks can corrode rendering the whole unit useless.

@PlumbingDoctors 2 года назад

Tbh mate ive fitted loads of these and never once have i been called to service them - they last for a good couple years with no major issues

@divinesalon339 Год назад

@@PlumbingDoctors do you know if these will give hot water to a few sinks? Or woild i need to oirchase a seperate one for every sink. We have just got a new shop and theres no central heatimg at all and we need hot water for 3 sink and a hair back wash

@tarlaz 2 года назад

Hi, I have got the same one, it keeps overflowing all the time, what do you think the problem is? Thanks

@Piekara83 3 года назад

Well done 👍 nice job 👌

@PlumbingDoctors 3 года назад

Thanks

@ranjitpatel496 Год назад

Really useful stuff I like the music!

@PlumbingDoctors Год назад

;)

@simoncarpenter9119 3 года назад

Top video. 👍

@PlumbingDoctors 3 года назад

Thanks 👌🏼

@andreg880 2 года назад

So I bought one yesterday. After installation the water is only getting luke warm, any advice?

@tricky1183 Месяц назад

nice and neat, thanks for sharing, great tips, i learnt a lot.

@PlumbingDoctors Месяц назад

Glad you enjoyed it

@jasongittoes7299 3 года назад

Many thanks it’s always nice to learn something new got one fitted at my training centre

@PlumbingDoctors 3 года назад

Good to hear

@tomgreen2126 2 года назад

Fab video... literally the best guide for these heaters on the internet. Newbie question, how do you drain down? Thanks

@PlumbingDoctors 2 года назад

Via the hot tap

@01adaada27 2 года назад

Good job bro

@PlumbingDoctors 2 года назад

Thanks bro

@Utdmanutd1 3 года назад

Nice install. What fitting did you use to connect the copper discharge pipe to the plastic waste pipe?

@PlumbingDoctors 3 года назад

Compression 40mm equal tee with a reducer

@waheedjalali1618 3 года назад

Good job As well as good tune

@PlumbingDoctors 3 года назад

Thanks

@Minimalist11Guy 3 года назад

Thank you very much for a comprehensive video; it is such a pleasure that you take such pride in your work.

@PlumbingDoctors 3 года назад

Thanks for the feedback and yes I always try to do a good job 👍🏻👍🏻

@peymansharifi5833 3 года назад

Thanks for your video ! Can I ask if I need to fit one of these 10L under kitchen sink- next to mecerator pump for waste, can discharge pipe be connected to the waste pump ? Thanks

@PlumbingDoctors 3 года назад

Not sure best to check manufacturers instructions or give them a quick call.. let me know what you find out 👍🏻

@peymansharifi5833 3 года назад

@@PlumbingDoctors thanks for respond will do cheers 👍🏼

@iftiaqahmed2807 Год назад

Thanks for that also want to get into boiler repair any advice what steps to take.

@PlumbingDoctors Год назад

go to manufacture courses

@mba0073 Год назад

Mash’Allah very informative video. What do you put the overflow from the tundish into? Is it like into the existing 32mm waste for the basin? Or do you run the copper all the way out of the building?

@PlumbingDoctors Год назад

Depends on manufacturer some prefer copper but it done this in to high temp plastic

@mba0073 Год назад

@@PlumbingDoctors sorry what I meant was where so you run the discharge into? It’s difficult for us to run out of the building as it’s for a bathroom in the middle of a residential flat so wondering if it’s possible to run the overflow into for example the water for the basin?

@adnanidf94 3 года назад

Great video bro. Keep up the good work.

@PlumbingDoctors 3 года назад

Thanks bro

@jamesbennett5041 Год назад

What are your thoughts about fitting these at lower levels? We have one fitted under a counter at our house which has worked fine for years but when I asked Ariston they said they couldn’t honour a warrantee if I fitted a new one under a kitchen counter. Do you know if there is a physical reason why it can’t be done if there is enough room. Any comments appreciated, thanks 👍🏼😊

@PlumbingDoctors Год назад

you can buy other ones which are deigned to go under

@user-fe8vk9ql2t Год назад

Building a salon next to our house for my partner, and thinking of using the 30 litre one for the wash hair basin, fitted loads of these but never actually used them so don’t know how practical they are. Do you think the 30 litre one would be suitable or am I better off using an instant hot water one? Good install by the way

@PlumbingDoctors 11 месяцев назад

Yes 30l stored would be better for you

@KR-fn6sd 2 года назад

Hi, I have one of these heaters that’s lost it’s power for some time, I’ve just had the power reinstated but the water is not getting hot? Is there a reset or something that must be done?

@PlumbingDoctors 2 года назад

Yes there is a reset switch on the immersion check manufacturer service manual

@dilligaf2386 2 года назад

So if I fit a 10 litre one I don't need the other bits that you buy separately, great video

@PlumbingDoctors 2 года назад

Check MI

@zali1457 3 года назад

Hi mate good video it looks like you're in a commercial premises don't you need thermostatic mixer valve under the tap also no legging thanks

@PlumbingDoctors 3 года назад

That was there before but good spot

@psysya Год назад

My pipe makes water pressure noise when water turns on what is the cause?

@davidhughes769 3 года назад

Do the pipes have to be soldered or are compression fittings OK to use. Soldering is a much tidier job I know but I'm just curious

@PlumbingDoctors 3 года назад

Nope you can solder, use compression, push fit, press fit...

@davidhughes769 3 года назад

@@PlumbingDoctors found this extremely helpful. Thank you 👍

@jimch4640 2 года назад

Neat work, but your meant to use those plastic fittings as they’re dielectric fittings to stop electrolysis. 😉

@PlumbingDoctors 2 года назад

Your right 👍🏼

@samjames5530 3 месяца назад

@@PlumbingDoctors My understand was those dielectric fitting was to stop the tank from rusting. I guess if you used gas PTFE tape there is a chance that you wouldn't have the copper touching the iron (i.e. you would have made your own dielectric fitting). But there is a chance doing it your way would reduce the life of the unit. Would you use the dielectric on furture installations??

@zackhayum 2 года назад

Bro, i just had a 15l undersink heater installed. Does it require a expansion vessel? My plumber installed without one :(

@bernardkinsky1637 Год назад

I see that the expansion valve is for European market only,but I have to say I would fit one

@PlumbingDoctors Год назад

It depends on incoming pressure and other things but i always fit one

@paigeskyye8811 2 года назад

Can I use one of the water heaters for a shower

@PlumbingDoctors 2 года назад

Yes but not ideal as the hot water will finish before u finish having a shower - Better to get a one which holds more water

@hamidn7032 3 года назад

great video mate. I think pressure reducing valve should be after water meter . correct me if I am wrong please. thanks for great videos .

@PlumbingDoctors 3 года назад

Yep

@alfoxthelostone4682 2 года назад

it cant hurt to have an independent wrv to adjust the water pressure just for the heater

@jasonace5904 7 месяцев назад

Hi great video very helpful. Do you leave this turned on 24/7

@PlumbingDoctors 6 месяцев назад

Yes

@EngRMP 2 года назад

I've been doing some research. I don't think you handled the pressure relief plumbing correctly... love to hear your comments. I think the PRV should drain through a visible air gap for two reasons: 1) if there is a leak to the valve (apparently pretty common), you'd like a way to see this. 2) prevent bacteria from backing up into potable water supply.

@PlumbingDoctors 2 года назад

Have you not seen the black tundish?

@EngRMP 2 года назад

@@PlumbingDoctors I stand wonderfully corrected.... thank you sir, I had no idea what a "tundish" was... well done.

@PlumbingDoctors 2 года назад

@@EngRMP 👍🏻👍🏻

@PowerPlusHeatingTv 3 года назад

The bends that you did at the pressure relief at the top and the pressure reducing valve would have been good to see

@PlumbingDoctors 3 года назад

Check my other vid out its the same principle bro...Just start practicing and it will come with time

@PowerPlusHeatingTv 3 года назад

Copper prices are the highest they have ever been tho 💔 lol I'll have a go keep plugging away great finish quality feel to the vids now with intros and outros

@PlumbingDoctors 3 года назад

Yep slowly improving the video... use the scrap pieces to practice

@silverman321 Год назад

Would one of these be able to cope with a shower or a bath? Or would you need to a system with a cylinder?

@PlumbingDoctors Год назад

nope not enough water for a shower or bath - use a cylinder instead

@llCarpentry_Joinery 2 года назад

Does it work with speed fit?

@PlumbingDoctors 2 года назад

You can use speedfit yes

@11982463 2 года назад

Before i start, no offence i watch many of your videos and i think you are great, but 1,did vessel not come with fixing kit?if it fails,is it not gonna be too heavy with it dangling in the air like that? 2,im sure you have to use the plastic fittings(dielectric junctions) otherwise u’ll invalidate the warranty, apparently its to prevent electrolytic corrosion. 3,in the diagram,it is a draw off point, not a drain off point, sure u know that, u probably just said it wrong. Again. Please dont take offence, please correct me if im wrong, you put up great vids i have learned lots from you 👍

@PlumbingDoctors 2 года назад

Thanks

@divinesalon339 Год назад

Hi im moving into a shop wich has no central heating. If i get one of these can it be used for kitchen and a hair backwash and 1 more sink? Or do i need a seperate one? Also how kong do these take to guve hot water x

@PlumbingDoctors Год назад

Yes you can use for all but not together and it heats the water within 5- 10 mins

@simonwedgwood8072 11 месяцев назад

Can you use plastic pipe? TIA

@PlumbingDoctors 11 месяцев назад

Yes I don't see why not

@naeemdawood1106 2 года назад

Can it be used to feed a shower ?

@PlumbingDoctors Год назад

nope not enough water

@pb9926 3 года назад

Good installation - but the nylon unions you didn't use are not for tap connectors, they are DIELECTRIC unions and are to stop corrosion within the unit. Without having them installed the warranty is void. I'm not knocking the video in anyway, it's just I've installed 100's of these units and have dealt with ariston directly.👍

@PlumbingDoctors 3 года назад

Thanks for the info! 👍🏻I didn't know that... I'll get that sorted.. can i get the nylon unions as spares ?

@pb9926 3 года назад

@@PlumbingDoctors I believe you can get them as spares Plumbing Doctor 👍 great channel you have 👍 like I said in my first post - it wasn't a dig at your installation but just some information for you. No one knows everything, we are all learning every day 👍 keep up the good work Sir

@PlumbingDoctors 3 года назад

Thanks no worries i like honesty

@davidceredig-evans8772 3 года назад

@@PlumbingDoctors Plumbase can supply those dielectric unions.

@PlumbingDoctors 3 года назад

👍🏻

@hashtagrotistudios6471 9 месяцев назад

Hi what would you charge to install this

@PlumbingDoctors 9 месяцев назад

@simonmowatt3213 6 месяцев назад

My guy

@PlumbingDoctors 6 месяцев назад

👍🏽

@ILLYRIANW0LF 3 месяца назад

can this be used for a shower?

@PlumbingDoctors 3 месяца назад

Nope not enough water

@keithbrueton 3 года назад

Did you really need to use the PTFE tape ?

@PlumbingDoctors 3 года назад

Good question!... I don't think you need it due to the rubber washer but i always wrap some PTFE around the male thread 👍🏻

@soyebmankda8387 3 года назад

you do if the thread are longer on the iron than the connection on the water heater may not make a good seal with rubber washer especially when using fittings that are not supplied

@eazyrat Год назад

Thanks good vid. Voice too quiet music way too loud blew my ears off. cheers

@PlumbingDoctors Год назад

Noted!

@user-px7pf8bc9z 11 месяцев назад

Very good video except the music is very lowed and when your are talking is very quiet, it should be other way round other wise excellent, very helpful thanks.

@PlumbingDoctors 11 месяцев назад

Noted!

@saidhissoufi277 2 года назад

Salam brother I am new in this game. I just got my G3. How much you would charge for this installation

@PlumbingDoctors 2 года назад

Wslaam - 1million

@saidhissoufi277 2 года назад

I charge 800

@ifyougetstucklookitup237 2 месяца назад

@@PlumbingDoctors🤣

@nhlambetoaction4766 2 года назад

Can i fit this in the bathroom?

@PlumbingDoctors 2 года назад

Yes

@ukgasengineerssolutions Год назад

Salam brother why u didn't use a combination valve ..it would have been easier

@PlumbingDoctors Год назад

Good question 👍🏽

@jamie1549 Год назад

Show picture of how too wire you helm

@PlumbingDoctors Год назад

you helm?

@jimmyman8031 Год назад

You’re meant to put the dielectric fittings on, to stop electrolysis, NOT so you can put flexi tap connections on them 😂😂😂. The 1/2” female copper to irons can still connect onto the dielectric fittings. 🤯

@PlumbingDoctors Год назад

yes your right 👍✅