Electricians Don't Want You To Know This! Join Electrical Wires Without Soldering 

Сто процентов правы.При просмотре видео такое ощущение что рыбак решил стать электриком.

@@user-ie5gu2gm5n h,8

46

Вам спасибо.

🤝👌👌👌

Yep tight clean wires keeps the path clear.

This is why they are third world countries...

So... what are other methods do you prefer instead of these methods? I'm curious how electricians connect the wires.

Horrible and dangerous!

@@yoonpark8311 wire nuts can be purchased in any hardware store. The packages on nuts always have a list of wire size and how many of those wires each wire not can safely handle. Always remember: heat is a factor for safety. Wires heat up based on how much that circuit is being used for. Example: 10 table lamps on 1 circuit at 13 watts (LED) is 130 watts. A 15 amp circuit breaker is 1800 watts. Very safe. 1 floor standing heater is 1500 watts at full use. That should help.

I was attending an NFPA Electrical seminar and the instructor started by showing a small building that caught fire and burned down, his complaint was that the fire department could not determine the origin of the fire as the building was not wired. This type of connections are not made by knowledgeable Electricians and most likely would contribute to the fire of the building that was not wired.

I guess you're insurance agent don't want you to know these as well. Great YT did away with counting that tumbs down..

You shouldn't do anything.

🤣

Exactly!!!! 💯

Я сам не электрик, но почему такой трюк с проводами не желателен?

@@games4us132 даже как он провода зачищает так запрещено.

Pode até dar certo mas além de ser errado não ter um sodador que é baratissimo comprar um soprador que custa dez vezes mais é idiotice

🤣🤣🤣👍👍👍👍

@@Dimonss777 точно, в самом начале увидел и всё- ясно.

Yeah, I don’t think he gives a crap about your society’s codes and doesn’t need to have an insurance company micro managing his actions. Damn the man and his plots to control the common man. Go on home boy!

I’ve been in school for electrician for some several months now. This seems very NOT what they would teach and allow. Lol As far as code goes, yeah no. Consider your project or whatever it is shut down. You could nick the wire, causing the rating of the wire to go down, which could cause the load of your device to not work properly. Terrible idea in my book. lol

Wouldn't the first knot create a dead short?

@@phoenixfireclusterbomb tell it to the judge when you burn down a house and get charged. None of these tricks would pass code. They may be cool for some speaker wires or whatever, but no professional would ever use them on a job.

radii

Lenny! Wasn't it you that rewired my house for me? you know, just before the fire. Come to think about it, wasn't it you that turned up to put it out? Wow! It really IS a small world.

@@ivanashley7875 Sorry, you have me confused with someone else? Never wired anyone's home. Maybe you missed the part about me being a Firefighter , not an electrician? 🤣

@@ivanashley7875 this is a hilarious joke! Jokes aside, this is next big scam for sure.

@@milltona Firefighters starting fires to stay employed isn't new. Although usually they do that in the forest. Easier to cover up and less risk of homicide.

@@T1Oracle oh, geniuses! apparently I'm just not devious/smart enough to think of that on my own.

Hi, you said: Better electrically than knots. What would be the basis? mechanical? because the electricity circulates the same as if the connectors were there.

@@T0berius Said with all the certainty and uncomprehending confidence of someone who knows twothirds of point 5 or fkall.

ok, why is thad

Bab Boon actually I have made several subsea splices in umbilicals for hyperbaric welding application. The tide and currents would induce micro movements in the cable and joint . The most efficient way was indeed to splice using a reef knot in the first example - we had zero cable breaks compared to crimping and soldering .just saying like !

@@dennispickard7743 That's genuinely interesting. Suspect the cable was a bit thicker than the home wiring entheusasts here reckon is fine 'though?

Не, я бы просто вырезал эти узлы и сделал бы нормальные либо скрутки с последующей опресовкой, или клемник если нужно будет обслуживание в дальнейшем.

@@user-ll5td7kk4p Здравствуйте уважаемый , вот это понятно и ясно , кто в теме . Вопрос в студию другой : - Что бы Вы , сделали с таким мастером электроузлокрутчиком ???✍✍✍✍✍✍👋✍✍✍

@@user-fv9cz3kd1i дык вы в своём первом комментарии всё чётко написали, ЧТО с ним с делают))

@@jekajackson2613 Да ,благодарим , всё выяснилось , извините за недоразумение , ситуация .✍✍✍✍✍✍.

Такой специалист будет уволен раньше, чем закончит монтаж оборудования)))

As a retired union controls tech I AGREE!! Those connections will fail!

Union sheet metal guy here. I think this is from som third world country lol. Im surprised they even used shrink tubes. He was probably a master electrician in Somali or Bangladesh 😝

Wow and people wonder how fires start that were caused by bad wiring....

Ex sparky here, most of these look rubbish, first one is solid though if you are ever in such a position to join wires like that which is pretty much never.

@@johnanthony2545 Yes especially in HVAC as most lower voltage today is used for power and data communication. We have seen some connections that will carry power but no data if not properly done.

Зря ты так. Я например научился на этом примере рыболовные узлы вязать ,😁

Macrame! I love it!! 🤣

Не пожарники, а пожарные. Пожарники это те кто погорел, а пожарные тушат

@@zaRus8224 пожарники это жуки. А те кто погорел, погорельцы.

@@user-wf6zh4su4f спроси у пожарных, как они называют погорельцев

Even by doing it correctly the contact area in such a knot isn't very large, so pumping a lot of current through could heat up the wire

I have friends who were Sailors and electricians, well more accurately, electricians for the Navy. I'm very certain when I send them this video, it will probably make be something that causes nightmares and unbelievable amounts of cringing. 😂😂 I know it was a joke, but still... Maybe I'll send it to them with a message asking if that's how they fix their stuff... 😂 I expect at least one of them to send me a wall of rage text explaining why this is a terrible idea.

Highly probable that the particular sailor needed a career change after he sank the last ship down with those techniques

@@kraziecatclady That's right the naval ratings Aviation Electrician Mate and Electrician Mate.

Hope you've got good insurance.

Или клемники

And connecting wires that way also is dangerous generally. At least EU/Indian outlets aren‘t polarized.

Pésimo electricista

Yes blue and brown are a bad idea, European negative and positive colour code

Ok sure but thats nothing to do with why this is dangerous. This guy is just trolling us and trying to get people to start fires.

@@crabbyr6929 Actually, blue neutral and brown live. There is no defined polarity in AC, the brown live wire keeps switching form positive to negative with respect to the blue neutral, 50 times per second here in Europe (50 Hz). However, as the neutral wire is hooked to earth ground, it's not as dangerous to touch as the live wire. Would be nice if it were possible to hook them both to earth ground, and still draw power from the grid.

Tem o pedreiricista pescador que faz anzóis na instalação e tem o amarrador também que é o pioramento técnico do primeiro.

Exacto no son permitidas yo soy educador e instalador electrico y debo enseñar correctamente

никак

It can't be. Don't, under any circumstances, use what you were shown in this video, unless you want to build a new house soon because your current one burned down.

"умельцы" на свою и чужую беду найдут как их использовать под потолком

I will say that in Russia it is strictly prohibited. For such a connection, any master, if there is a check on him, will get very hard on the head.

@@andyxox4168 i hate wire nuts. i will always use crimp connectors, if i need to connect more than two wires i will get a terminal board if i can. vary rarely would i even consider wire nuts.

No, there is absolutely zero reason to use any of these methods regardless of the voltage. Either these will melt, or you'll get a bad signal.

I wouldn't advise it on low voltage unless it an emergency and you be watching it. I was doing it to 24v system it destroyed it very expensive mistake and it could of burnt my boat down and being homeless again is not on my list of things to do

@@andyxox4168 You appear to be using IEC definitions, but that is actually not how most people use the terms in my experience. Typically, either 24V or 48V is considered the upper end of "low voltage" electronics in most circles (maybe not counting power grid engineers), and is the more common definition that alan clearly intended (and was intended in my original comment as well). (Even according to other standards, such as the US NEC, "low distribution system voltage" is defined as 0-49V, etc.) And to be clear, I really *was not recommending this for lower voltage use either,* I was just saying that it probably wouldn't create an actually _dangerous_ condition if used in most hobbyist sorts of applications, but that still doesn't mean it's a good way to do things, or that it couldn't cause other sorts of problems in those cases too. (There are also potentially a few low-voltage but high-current applications where this could actually be dangerous as well, so it really depends on the application, and I agree that it should probably just be avoided in general anyway.)

Did you feel like you needed to announce that you are an "electrical engineer" to qualify your comment with regards to wire splices? That's about as imbecilic as announcing you are a master chef prior to commenting about the proper way to boil a hot dog.

@@alphaforce6998 So you would rather hear about this from a landscaper or doctor? His couched his statement as coming from someone who is a professional in this field. A perfectly reasonable thing to do when commenting about your professional area of expertise. If you were a professional at anything, you would understand. You can go back to making hot dogs now, since that seems to be your point of reference.

@@alphaforce6998 Nope. Most engineers shouldn’t be allowed near tools and couldn’t make a proper splice. I was an electrician before an EE. I critiqued something technically as someone with technical knowledge. You made a personal attack, which generally signifies insecurity and someone that needs to denigrate others in an attempt to make themselves feel better. Have a great day though.

@@NobodySpecial512 There are plenty of incompetent "professionals" so no, I don't see any value in announcing this other than to stroke your own ego. Professional means you do it as your profession, i.e. you are being paid to do the work. It does not in any way mean you are competent or have any particular expertise.

@@billgriffis5069 You do not need to be an electrician to splice wires, and so mentioning that you are/were doesn't elevate your comment on this topic... and if you think what I said is a "personal attack" then it would be you who is projecting your own insecurities onto me.

провод не несёт силовой нагрузки, но прочность на разрыв не помешает, вдруг удлинитель потянуть нужно... но вязать узлы, да ещё и связывать крестом фазу и ноль нет никакого смысла, есть более удобные и вполне прочные способы скрутки провода )))

Плюс с минусом смотал , чтоб электрик охуел

@@Viktor_Pertsovich такое вязание преминяется при ремонте кабеля кгрш в шахте когда большая длинна кабеля тянется за горными машинами!

@@user-we1zm4db1m в сети не бывает + и - . Только фаза иноль

для чего узлы? точно не для электро проводки, видимо рыбу вялить будет после рыбалки)

well, honestly as an electronic technician, i always joke i weld like an electrician solders...the bigger the blob the better the job! i really cant think of very many if any reasons an electrician needs to solder anything. and i dont suggest electricians work on electronic boards, (see above joke based on truth lol)

Yeah, and I will defenitely NOT solder in a tight space..

Určite žiaden nerobí také neodborne spájanie vodičov! Dnes sú prípravky na spájanie, stoja par centov a každý elektrikár ich ma kopu v zásobe. Kým ty oblankuješ vodič, spravíš uzol, navlečieš bužírku a nahreješ ju. Elektrikár zapojí wago - svorkami asi 15 káblov. Strata času a keď to začneš skúmať a zisťovať koľko stupňov majú iskry pri nedobrom spoji budes akurát smutný keď ti zhorí dom

In Deutschland alles andere als erlaubt, man würde dich feuern wenn man das entdeckt.

@@davidweinreb595 what

@@WolfgangFomme what

@@jeswinmathewthe boss of an Electrician in Germany with fire you if you will see that

because of induction of entangled wires ?

No, fixing for a emergency and leaving a fire hazard is no go..

I think even the US code forbids this. At least the title is right, electricians don‘t want to know you about this because it‘s a fire hazard.

30

Serviço correto é charruar.

Вообще-то, согласно пункту 2.1.21. ПУЭ, соединения проводов и кабелей должны осуществляться одним из следующих способов: сваркой, опрессовкой, с помощью винтовых или болтовых соединений, либо методом пайки в соответствии с действующими инструкциями, утвержденными в установленном порядке. Применение пружинных клемников допускается, термин именно «допускается» (это синоним фразы - «так сойдёт»), в обслуживаемых распаянных коробках, т.е. к которым есть лёгкий доступ для проведения ревизии. А в остальном Вы абсолютно правы. 😉

@@user-xq9ir8eb2v он не знает, что такое ПУЭ.

Это же русский канал какие СНиПы

Смотря для каких случаев? Зачем? и почему! (надёжность, конечно, имеет значение... ) , *НО вот "термоусадка" не панацея!!!). При касании таких Трёх "куколок" ~380 В (даже обернутых общей термоусадкой) - провода "неплохо шьют" и ещё портят оборудование!!!* Так что не стоит забывать и про изоляцию и про "среду проживания" проводов! ( медные провода марки ПЩ кародируют так, что превращаются "в песок"). Иначе получится, заставь дурака, а дальше сами знаете....

Not fine for low voltage either.

@@electvolt67 but great for macrame

@@johnny538 lol!

Yes, easy way to keep wires together for soldering, just cut away rest of wire(s) before shrink tubing???

Exactly! Plus they violate the NEC standards!

And UNSAFE!!!

No soldering either.

In all the universe!!

None. This is utter stupidity here in this video.

It’s not uncommon to “bus wire” power and ground for some low voltage application circuits. A common example would be string lighting.

@@billgriffis5069 It is uncommon to do it in the middle of the wire itself. Or at least it should be. Use a bus bar like a civilized person rather then tying knots in the wires.

@@FakeSchrodingersCat Correctly sized wire functions as a bus bar in many common applications and there is nothing wrong with an inline tap/splice when done properly; The methods shown in this vid are not examples of 'properly'.

@@billgriffis5069 Maybe but it still makes my skin crawl even thinking about it.

Ахахах, не только русские пишут, что это хрень полная)))

@@pavelplehov3704 The words "That is a stupid idea" is understood in all languages, my friend.

The last one reminded me of the outlawed Western Union splice we were taught never to do as apprentices....lol.

None. Please do not do this!

And if you have one short end to pass through the loop!!!!

@@andersonec1 🤣agreed

I bet the resistance of modern day solder is more than the contact resistance of the surface of copper, clean or oxidized

so all those wire nuts in the wall dont go up in flames....

also we dont solder wires in our homes this argument is false

Which nation? RU-vid is global. It covers all nations.

I'm thinking they mean electricians don't want us to see this because it shouldn't be tried when actually doing electrical work. There's always that one person, shade tree electrician(using that very, very loosely) that says I can fix it.

Me too, 50 years! Look all they want !!! Till their property burns down bc of loose connections over time. These video titles are pathetic. Take care Sparky!!!

It‘s dangerous and that‘s why electricians don‘t want others to see this. Wago terminals (and wire nuts) are definitely better for this.

And I studied how to use a multimeter! and once all of my notes were securely printed into my book, although my citation of the auto parts store website video might have been recorded improperly, these notes may have been useful if not left at a different location in just the knick of time too; it's a good thing I have been instructed to apply crimps before!

Видать украл телефон у санитара, пока тот ему делал укол, потому что у пациентов в психбольнице отбирают телефоны, что бы вот такие видео не выходили в ютьюб

I want to finish what I was saying it's illegal to have a slice in a raceway and then you got two ends on on each end for what they tie in the middle whoever is producing this clip you must want to show people he can tie knots

Parceiro sou eletricista e Esse método e seguro sim.

Wire nuts are another disaster in the making.

I have soldered and heat shrinked many cables in my life. It is common practice especially in the marine industry where you need a propper waterproof joint.

Claramrnte trabalho de merda

Como não fazer um derivação, é conteúdo para os professores de elétrica mostrar para os iniciantes de como não fazer kk

@@otaviosombra4954 exato

O si tienes que hacer una derivación sobre una instalación... Como los tuerces???

Me parece más un curso de nudos.

If you had to read comments from electricians to know this is a bad idea, never do ANY electrical work, EVER.