Elegoo Uno R3 Smart Robot Car Kit V 3.0 - FULL REVIEW - Arduino Kit | Max Imagination

Подписаться 142 тыс.

Просмотров 51 тыс.

50% 1

Hey everyone! In this video, I unbox, assemble, and test the Elegoo Smart Robot Car Kit 3.0 PLUS, and fun and educational robotics kit, the car can follow lines, avoid obstacles in its way, and can be controlled via Bluetooth or by an IR remote. I had a lot of fun with this kit Elegoo sent me, I recommend you guys to get one of these for yourself too!
Buy this Smart Car Kit on Amazon: amzn.to/3VlOazX
Download an Arduino file: drive.google.c...
👕 Grab my exclusive Merch here! - max-imaginatio...
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.c...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoff...
----------------------------------------------------------------------
Instagram: @max.imagination - www.instagram....
Instructables page: www.instructab...
----------------------------------------------------------------------
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Music tracks used in this video:
Juno In The Space Maze - Loopop
Two Face - Cosmic
Santorini 2 - Vibe Mountain
Randy Butternubs - Dyalla
Danger Snow - Dan Henig
#elegoo #robotics #arduino

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@MaxImagination 3 года назад

Hey everyone! The comment section has finally been re-enabled over the whole channel after 2 years by RU-vid themselves who shut it down in the first place. Glad to be in touch with my viewers again! :)

@Kevin-mh8hj 3 года назад

hi do you have the 4.0 version?

@yakovhammer5739 Год назад

Thanks for the awesome video! I have never in my life built a robot. Would you recommend this for a beginner like me?

@MaxImagination Год назад

Thanks for your comment! Sure! I think this would be a great beginner's kit.

@Shibzzeg Год назад

Thank you for properly disclosing the sponsorship

@vedakthakur656 2 года назад

Hi , Iam Vedak Thakur. Iam an Indian and 14 years old I have found your vedios very helpful. I have also seen that you reply your viewer as soon as possible. Actually Iam having and order to sell a car and I was really worried that how Iam going to write a code to controll many of the functionallty together . Iam really learning many Things from your vedios............and I respect yo so much. BEST OF LUCK FOR YOUR FUTURE PROJECTS .............

@MaxImagination 2 года назад

Hello, Vedak. Thanks for watching my channel, I appreciate your kind support :) Please specify what kind of car you need a code for, I actually may already have that code saved somewhere for controlling a car like the one seen in this video, if you need it, I can email it to you. Cheers, Max

@vedakthakur656 2 года назад

@@MaxImagination ok, will you please help me out for code

@vedakthakur656 2 года назад

@@MaxImagination I want to make the same type of car which you have made in this video but I want to use 4 * IRsensor instead of using servo and ultrasonic sensor. Do you have any idea about how to write the code..... Remember that four IRsensor's will be placed in four corners of 2wd round chassis...... I will send you the photo of chassis on email

@vedakthakur656 2 года назад

But I only need the obstacle avoiding code with four irsensor's

@FatsigePapzak 4 дня назад

@@vedakthakur656 this is why i quit robotics, too many sweats

@dakotacarpenter7702 7 месяцев назад

Do you think it would be possible to add a speaker? Assuming it has an FPV camera, it would be cool to be able to talk from my phone, through the speaker mounted to the car. Then again, the camera may not record audio.

@MaxImagination 7 месяцев назад

With the right audio I2S mic and corresponding programming setup with an ESP32 board, it may be possible, yes.

@nat_5595 3 месяца назад

would you know if it is possible to control this with a transmitter controller, instead of the app or remote control it came with ?

@MaxImagination 3 месяца назад

Hey! Yes, it is possible. Watch my Arduino transmitter video where I control this car: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-47eBRwFQp-g.html

@ShortHuman1 9 месяцев назад

Can you use the arduino it comes with for other projects? I would love to be able to take the components and make custom bots in the future

@MaxImagination 9 месяцев назад

Yes, you freely can with whichever code you please to upload to it.

@SadececKaka 11 месяцев назад

Yerdeki bantlar elektrikli mi yoksa sade

@MaxImagination 11 месяцев назад

Plain electrical tape

@eweremoseri5697 6 месяцев назад

Cool

@marcosdasilva7409 Год назад

👏🇧🇷👍🇧🇷

@OmindiGamage Год назад

Is this kit able to Add Camera Also ?

@MaxImagination Год назад

Yes, such as this one: (ESP32-CAM) amzn.to/3g6iaBa

@1empyre1life Год назад

There is a v4 now that includes a camera/wifi

@GaryParkin 4 месяца назад

Hi Max. I was thinking tank treads but when I saw this car I was hoping you did a review. Thank you. Engineering question please? can you alter the speed of the car by programming? I'd like to slow it down. I plan on adding more sensors like a LIDAR chip to digitize my living room just for fun. I was also thinking of adding more options like an on board camera, or an ESP32 and run it with WiFi. Any ideas?

@MaxImagination 4 месяца назад

Hi, Gary. You're welcome. Yes, you can alter the speed by adjusting its code - by changing the PWM values (normally 255) to some value lower. However, if the robot works based off digitalWrite which is HIGH/LOW only, you'll need to rewrite the motor driving part of the code to write to the PWM pins with varied speed. If you're interested to add an onboard camera, I suggest you look into Elegoo's latest version of this car with an ESP32-CAM. Cheers.

@GaryParkin 4 месяца назад

@@MaxImagination Excellent! I'm off to Amazon. I don't mind rewriting the code, in fact I'll prob. tinker with most of it.