EMAX TINYHAWK FREESTYLE UPGRADES - DO THESE NOW!!!

Подписаться 200 тыс.

Просмотров 84 тыс.

50% 1

Upgrades for your Emax Tinyhawk Freestyle. Upgrade it all in this video. Justin Davis shows you how to upgrade... bonus flight test comparisons. Enjoy!
Parts links below.
Buy a EMAX Freestyle Quad
Banggood : bit.ly/2KHQH55
Coupon Code : toyho
Freestyle Upgrade Parts list :
-------------------------------------------------
Runcam Nano V2 Camera : bit.ly/2YJgV0U
XT30 Connectors : bit.ly/31E9Xrb
Lumenier AXII 2 Antenna with MMCX : bit.ly/2H346ne
HGLRC Forward 350mw Mini Vtx : bit.ly/2Kvodg0
Frsky XM+ Full Range Receiver : bit.ly/33vnfYJ
Suggested 2S Battery : bit.ly/2Eeoe4D
Extra Avan Rush 2.5" Props : bit.ly/31AWtMQ
HQ 65mm "Stiffy" Props : bit.ly/2GVrdjL
My latest DC/RC $-Off Coupons : bit.ly/2JYiDCM
▼- BE MY FRIEND:
Support me on Patreon
GET Entered to WIN SWAG'FEST Giveaways!
Link here : goo.gl/4YRncZ
▼- DRONE CAMPS CHANNEL MEMBERSHIPS - $4.99 a month
BECOME A MEMBER - Access to LIVE Video Streams
-----------------------------------------------------------------------------------------------------
"MEMBERS ONLY" - BEHIND THE SCENES ACCESS!
LIVE STREAMS Include :
---------------------------------------
- Build videos
- Bench time
- Tutorials
- Fpv Road Trips
- Member chat
- Flying Sessions
- Video Vault
- Chat Badges
- Drone Camps Chat Emojis
It's like hanging out in realtime! Members are saying it is awesome to hang out and talk with Justin Davis in person. Members get automatic notifications for live streams.
▼ - JOIN and become a MEMBER HERE : ru-vid.com/show-UCwoj...
▼ - OFFICIAL Drone Camps Merch Store :
T-Shirts, Long Sleeve, Zip Hoodies, and more
Store here : goo.gl/AGvXf6
▼ - What I currently use :
-------------------------------------------------------------------
Radio of choice : Frsky TARANIS X7 below.
Black : goo.gl/yAgKMT
White : goo.gl/NVVGxC
New Blue Taranis X7S version here :
goo.gl/cQDAQM
Carbon fiber X7S : goo.gl/CfPauy
My favorite race quad battery.
Tattu 4S 1300mah Lipo Battery
Link here : goo.gl/4dbuKj
My favorite micro brushless quad :
Link here : goo.gl/Jy2a9z
Economy priced 4S 1300mah battery here :
goo.gl/vUf2DU
My current favorite 5" race quad :
EMAX HAWK 5 Link here : goo.gl/t2g8Hm
My drone landing pad here :
goo.gl/9EnekC
My favorite Fpv Goggles are the Fatshark HD3
Link here : goo.gl/z2PgQf
Economy $50 pair of googles that have two
diversity antennas. Great for the price.
Link here: goo.gl/CLPiyy
Latest up to date RC and FPV Specials :
Link here : goo.gl/x5SUL8
Disclosure : Any video produced on this channel may have
an affiliate link in the description. Meaning I may make a
monetary compensation. Gotta eat! :) - Thanks for watching!
▼ - Business Inquires:
To get your product reviewed please email:
drone camps @ gmail. com
▼ - BE MY FRIEND on Social Media
Website : www.dronecamps.com
Facebook : / dronecamps
Instagram: / dronecamps

Развлечения

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 284

@ChristianTangoan 3 года назад

Can you make a video like this but the newer freestyle 2 version?

@stephenborunda547 4 года назад

got mine yesterday!!!!!!! we asked and you delivered!!!!!!!! THANK YOU! YOU ROCK!!!!!!

@dronecamps 4 года назад

You’re welcome. Glad I could get it for you guys! 🤘🏻🔥

@NachoFPV 4 года назад

Nice upgrades bro! I guess I'm going to have to get this quad. Thanks for the awesome daily content man.

@grandmaster-grouch 4 года назад

Mister Jay-Deezy!! I love this episode. What youtube channels lack from the golden age of our becomings are the little details around modifications. I recently witnessed several new pilots trying to learn how to modify their bnf. They would power use youtube meaning multiple channels active about 1 specific mod. If that was me it would annoy the shit out of me because having to correlate something ive never done using several perspective is not very confidence inspiring. I remember back then when videos would come up 4 mods. The channel would use still pictures with orientation markers showing the viewers a absolute confidence they are doing what they thing they are doing instead of trial by fire. I wish you did this for this episode. On the technical aspect of the mod. Some still shots with graphic notation identifying key must know best practices would go a million miles for any new viewer. Cheers

@brendanzaebst9011 4 года назад

Super funny when I ordered my tinyhawk I ordered the AKK 500mw vtx, that mmcx axii, already did the xt-30 and an rxsr. Just didnt think about cam because of the size. Thanks for the advice on camera Justin!!

@MarkGrob 4 года назад

LOVE MY FREESTYLE... thank you for the video!!

@dronecamps 4 года назад

Yw! 🏆🤘🏻

@BobbyMeeks 4 года назад

I had adambombFPV do pretty much that exact upgrade to mine. This is a beast now! Thanks for your vid

@dronecamps 4 года назад

You’re welcome

@propdusty6876 4 года назад

this quad is very very very i have to say very good out of the box people. rock solid. these upgrades are to make it a high end professional grade quad.. So all you people saying meh its not worth it let me say it is. I have flown a ton of quads out of the box and for this lil guy i have to say it fly exactly like a 5 incher. thes mods are if you want a pro rig. i pay out about $400 on a base line 5 inch quad build pro rig. You can have this for about 200 and tinkering. Just sayin. I make theis setup for friends only I use the R9MM with tbs ant and an akk 200-800 with micro mc and ant. Now Emax supplies the xt30 in the pack for the bat mod.

@tiggerbiggo 4 года назад

I just got the stock version, i will definitely be making these upgrades! As a side note though, I can tell this thing is gonna last. I accidentally smashed full force into solid concrete the 3rd or 4th time i flew it and there's barely any marks. Love it.

@dronecamps 4 года назад

Awesome! Mine is months old now and still one of my favs. It sits on my desk like a trophy 🏆

@LetsGetGaming. Год назад

well 2 inch drones last and are stronger than EXPENSIVE 5 inch drones which is crazy

@Yimaj 4 года назад

and here I am waiting for mine to arrive -_- thanks will do the vtx and xm+

@doktordrone 4 года назад

thank you, Justin and have a nice day 🙏👍❤️🍻

@jeffpv 4 года назад

Nice one brother, great upgrades! You've addressed all the things I hated about that quad perfectly. I was thinking of using the tx03 so I can change up the mw output. Funny, I'm thinking of the upgrades before actually buying the freestyle.

@brendanzaebst9011 4 года назад

Use the S version the original has no smart audio. For 7 more bucks you can get the akk and it's the same weight with 500mw and smart audio

@playmatee1 4 года назад

@@brendanzaebst9011 considering u wi;ll use 1s input voltage difference VTX03S Ingangsspanning: 3.3-5.5V , AKK X5 Ingangsspanning 5v . the 5 volt from the fc board is a stable 5v ?? and this will work ? and the AKK FX4 Ingangsspanning: 7v-24v will not work on 1 sright ? or what vtx will work with with 1 and 2s ?

@Funcentric 3 года назад

Another great video (I realize this is old and the Freestyle 1). 1. Is the velcro you have on the top plate for additional grip or dampening? You don't have velcro on your batteries do you? 2. Is there a maximum mw that the other components can handle? Can I use a VTX that has a 500mw? Would that fry any other components? My understanding is that it would probably use up more battery as the drawback.

@JayJay-pj5hz 4 года назад

Great video man. Where would I solder my crossfire rx?

@frankbarajas 4 года назад

Well done!

@dronereviewman9580 4 года назад

Nice up-grades and awesome flying! . 👍😀👍

@michaelolivier2275 2 года назад

A note is to not throw away the ph2 connector, just remove the heatshrink and solder a xt30-f on it, now you can use it with 2x1s or 1x1s & bridge connector on your th2 xt30-m

@joegunn7956 4 года назад

Great review as always 👌

@Retset 4 года назад

I enjoyed watching. Only negative point is that if all these upgrades are applied it almost doubles the cost of the quad! If i get one, I'll do the XM+ as my only Taranis is the X9 Lite so no D8. Query re the XT30 lead wrapped in the VTX antenna co-ax: In a crash that ejects the battery, will the co-ax still be OK?

@badassdrones778 4 года назад

Thank for these precious upgrades tips ! You might also consider adding a beeper because this thing is nearly impossible to find in the grass...

@corpsefpv3154 4 года назад

I second, I crashed in a field 4 weeks ago and never found it again! (still out there)

@quadcopterchameleons9289 3 года назад

Thanks for the very informative video. I have done everything except I left the stock camera and I use a eachine vtxo3s to save on weight. I prefer the hq props because of the throttle response in the high end. I’m using Tattu 450mah 95c hv batteries. My all up weight with the hq props is 82 grams and I get a full throttle flight time of about 3 1/2 mins. I really appreciate the Avon props for there grip and the big maneuvers like you said but with my set up the weight goes up to 87 grams and flight time goes down to 2 to 2 1/2 mins. It seems like to much amp draw. I’m really curious what your all up weight and flight times are with the Avon props and your camera and vtx?

@MachineManGabb 4 года назад

Great as usual

@PilotNgapak 4 года назад

Nice idea mate... 🔥🔥🔥

@ginchajsable 2 года назад

Hey !! Watching ur videos.. question is Tinyhawk Freestyle 115m or tinyhawk 2 ? what is better to choose ? Tahnks

@ReeferNoob23 4 года назад

Nice bot grinder shirt get that from a kawd box no doubt and awesome upgrades and good video on how to make the mods nice rippage too!

@alexramirez970 4 года назад

Nice video , I have a question can I bind the E6 transmitter that comes with the tiny hawk rtf to this quad? And if so how do I do it?

@graywoulf 4 года назад

I'm really interested in this quad. Your VTX upgrade looks to be a very worthwhile first upgrade as well as the XT30 (edited) connector. Thanks for the video and inspiration.

@johnk696 4 года назад

Xt30

@sladelefty 4 года назад

I am going to use a frsky R9 setup with 400 Mw of vtx and go long. The 5+ minutes of flight time should be optimal. I may put on a small gps and have rth capability.

@calebmorant932 3 года назад

Can you change the camera without changing the vtx or the antenna and Is there any other vtx you would recommend?

@xPureL 3 года назад

So, the black&red (vcc&ground) you solder directly onto the lc-filter? Together with the battery-wires? In my case, using an eachine vtx03, only 1 yellow (video) wire is left. Solder this one on the video-output from the FC? No problem I don't have the white (smartAudio) cable with it? Still works?

@xplore7359 4 года назад

Wouldn't the Phantom be the better qaud to choose instead of doing these upgrades?

@LCZeus 4 года назад

Really really an excellent job Justn, thank you very much for the valuable suggestions , always the NUMBER ONE. Everything seems to work well after the changes, but I noticed that the VTX card heats up a lot, you can't hold a finger over it, is it normal ? Now I see that I don't get the RSSI value from my XM Plus, what did I miss? I see RSSI on OSD google display, but no on my X10s.

@BeardieFPV 4 года назад

Mine heated up really bad too, then the other day when I went to plug the lipo in, I wasn't getting any power to the vtx... fried. Hoping it was just defective.

@donaro 4 года назад

should i change any settings if i will add Frsky XM+ Full Range Receiver in the betaflight? or just bind and fly?

@kimlindblom6964 4 года назад

you weighed the modded version with the HQ props. What is the AUW with the avan props?

@KCQuadTronX Год назад

would it be safe to splice into motor wire when switvhing out bad motor for new motor and then heatshrink around the spliced wires or is it only recommended to solder straight to the esc even though the old wires to the old engine are still soldered onto the esc along with the old motor atm because i havent gotten to it just yet

@BenderTheOffender 4 года назад

Isn't the VHB isolating the VTX and trapping heat?

@TheZolon 3 года назад

What FC Filter would you suggest? I have one of these that the VTX it came with has a cold solder joint, so I am replacing it anyways.

@devashishraverkar 4 года назад

Can I use low esr capacitor instead of lc filter?

@syntacelapierre7542 4 года назад

For everyone that is trying to Upgrade an R-XRS Receiver !!! You need to solder the Signal wire to the uninverted SBUS Singal (the Pad with the B on your R-XSR), then solder the other end from the Signal wire to the RX1 Pad on your FC. It is located on the Bottom of the FC. After that, go to BF and choose Soft Serial on UART 1, then choose Serial-Based Receiver and SBUS. Done

@codemans22 3 года назад

Cheers mate good videos thanks you!!!

@ernest_4104 4 года назад

If I want to change the camera to runcam nano v2 and install 350mw mini vtx. I need to buy full range receiver? I use frsky taranis qx7 transmitter.

@joecachia2 3 года назад

Since I'm a beginner I would prob like to fly this on a 1S only first. How can you connect just one cell ? You said u cannot use it on 1S if you change to an XT30 ? You did mention in another video that there should be an adapter for 1S?

@jamesh3837 3 года назад

Thank SHIT i found this video. I just bought the V1 of the TH FS by MISTAKE, thinking it was the V2. So i ordered a new VTX for it but then it looked like i wouldn't be able to replace the one that is on the bird. Glad to know i now can.

@dronecamps 3 года назад

You’re welcome James!

@jamesh3837 3 года назад

@@dronecamps let me ask tho, how did you remove the stock vtx? Did you just clip it off between those two plastic headers?

@homeofcreation 3 года назад

the vtx of choice is not available, any recommendations would be appreciated. And what are your thought about the Caddx Ant vs the Runcam Nano?

@chrismillersrcfamily 3 года назад

HGLRC VTX link in description doesn’t work. Do you have a VTV to recommend?

@lowkeyswe2260 3 года назад

Accidently bought the older tinyhawk now I gotta learn how to solder, wish me luck😅

@akdrifter8467 4 года назад

And in you want to do the xt30 convertion you just need to strip the wires and soder the xt30 to it??

@StarWarsfan-nq7fk 4 года назад

how would these upgrades go on 1s given the vtx needs a 7v input?

@tomelcock7659 3 года назад

For the xt30 upgrade do I just solder it on

@yorkshireripperfpvmolyneux38 4 года назад

Thanks m8 I got a vtx thanks pal

@trevorc6793 4 года назад

I plummeted for the TH FS and bought the hglrc fd vtx micro v1.1. It says input voltage must be 5v, but in you tutorial you say to NOT use the original vtx power pins (which are 5v + -). Which pads can I use as Im installing an xm+ so those power pads are used to?? thanks for any help.

@bmw-upgradech1665 4 года назад

have you considered BetaFpv 1s f4 board to save TON of weight? and nano 3 camera ;-)

@anthonysaint-preux5850 2 года назад

Do you know if you can wire a mic to the back of that EMAX camera? Just curious?

@trevorc6793 4 года назад

Super informative JD, questions is, this modded or the GEPRC Phantom?

@noobFPV 4 года назад

Get this one prebuilt, and get phantom in parts.

@graywoulf 4 года назад

So, with this setup wired just as shown, I will get the full OSD display?

@treyware1234 2 года назад

How did you get the FC to recognize the new reciever?

@brandohim 4 года назад

Hello! Great channel!! Could you help? I was on beta flight with my freestyle and hit the reset tab because I was having trouble with it connecting to my goggles. Now there are no modes and it won’t bind up. I think I wiped out the settings. Is there any way to fix this?? Re-enter the settings?? I just don’t know what to do. Thank you. I hope you could help me.

@jamesh3837 3 года назад

I have a set of RCD 1104 7500KV's that i'm not using. I wonder if i can install those on that quad (TH v1)?

@akdrifter8467 4 года назад

I have a question what type of battery do you use on this drone and how much c rating

@tiger8157 4 года назад

I have a blade 200 QX that i moved to a carbon frame. I want to upgrade motors for more power and Thrust . Any suggestions. And fly with 2 or 3s battery around 900 MaH ?

@vone405 4 года назад

does the vtx need at least 7 volts to operate?

@ijustrollrc3170 4 года назад

Right on

@SPAZit101 4 года назад

Just ordered one but i only fly with spektrum radios. I just hope to god i can get it working with a nano dsmx receiver

@dronecamps 4 года назад

You can. Just solder your power wire to the 3.3v tab for your rx.

@domanater480 4 года назад

1.8mm or 2.1mm camera also pal or NTSC?

@chrismitchell2337 2 месяца назад

got the tiny hawk 3 freestyle can i put better moters onit if so can you recommend some pls

@Strombonin_msm Год назад

would sc2 connectors work Aswell just ordered some. 😅

@dougmcpheters1546 4 года назад

Worthy! Any changes in the mAh recommended?

@dronecamps 4 года назад

No real change in mah size. 300-450mah same.

@conwaycostelow7281 3 года назад

Would the hglrc zeuz nana work on this ?

@domanater480 4 года назад

Original Looks like same camera as the mobula 7?

@paddytaube6848 4 года назад

Did the receiver upgrade after setting up correctly quad disarms before reaching 10cm height then quad turns off with plugged and also full battery SHORT CIRCUIT not visible

@kado17d91 4 года назад

I enjoy your videos immensely bub! I have flown my TH FS for a few days now and it flies amazingly. I have a spare vtx from my old Hawk 5. In your opinion do you think it would work decently with the current camera that come on the TH FS? Keep up the good work!

@dronecamps 4 года назад

I can’t remember... is it a smaller one or a 30x30?

@kado17d91 4 года назад

@@dronecamps It is about the same size as the hglrc you had used.

@Nine_883 3 года назад

I know this video is a little bit old, but do you know of a mod where anyone did a mod with a CADDX Vista and DJI goggles etc...?

@diprizzle 4 года назад

hello so i did the upgrades but i can not get any radio response in beta flight i am using frsky x9d plus with the micro rx my video tx is working fine my motors just sit there beeping and i know i’m bound because i get a telemetry recovered or lost from my radio i’m showing two urts in beta flight and have tried both and nothing 🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

@code3xiv 4 года назад

Can we run 2 inch props on it?

@pmtoam 3 года назад

I also would like an sd card in there in order to get cleaner video for more cinematic purposes but im mainly into fpv

@ch3w3yfpv42 4 года назад

GET SOME!!!!!!

@testpiloterb1828 4 года назад

It doesn’t work with one s it’s only so people could use their old 1s bats I had a extra eos camera I threw on mine and I wana do the vtx upgrade next

@SensorDelay 3 года назад

Can we get a TinyHawk 2 custom setup?

@RCOverKill 4 года назад

Hey Justin, These are very close to the mods I wanted to do. The difference is I will use a unify nano 50mw, I can get 100 yards easy with trees in my way. My question is running 350mw how much did that affect flight time? BTW Albert kim is making a tpu mount for the runcam racer if I heard him right.

@dronecamps 4 года назад

I’m running 200mw. Not a big difference.

@MosOneFPV 2 года назад

whats they time stamp for they tips on props ???

@ludmilpan 4 года назад

Justin! Emax Tinyhawk Freestyle or Diatone GTB 229 Cube?!!!!

@kenfuciusfpv2800 3 года назад

I'm trying to find something similar to update my friend's TinyHawk II freestyle. I am unsure if all these mods are still necessary, but he got the all-in-one kit, and it has some built in remote. My friend has a Taranis I got on FB garage sale, so I'd rather update it with a XM+ that I have laying around. Any suggestions? All my searches just find the old Freestyle.

@kennyfloyd4801 4 года назад

Do you sell one already upgraded?

@alexdarby6333 4 года назад

Thanks for the video. I did these modifications but can't get the smart audio to work. I can get the menu to come up in the headset but the drone won't accept any changes. I've played with the UART 2 and 3 options in betaflight. I can make VTX changes manually on the chip. What am I missing?

@leonardvoltages9562 4 года назад

Same , have u figure out ?

@alexdarby6333 4 года назад

Yea I saved changes before leaving that tab. I never could get the smart audio to work on the TinyHawk or another quad I built. Doesn't bother me at this point, I've got everything else working.

@DoRC 4 года назад

Do you have to make any changes in bf for the new RX or is the onboard disabled automatically?

@JohnWhite84 4 года назад

You would have to select what type of receiver your using in BF. SPI is currently selected.

@DoRC 4 года назад

@@JohnWhite84 ah ok. That makes sense.

@simonambo3681 4 года назад

Is this ESC the same as the tinyhawk 2?

@gygaxthegoat2491 4 года назад

Hey Justin. Im keen to swap out the shitty VTX in my THFS, and as you seem to know whats what, Im hoping you can help me out for a minute please. I checked out the VTX you recommend here on Aliexpress, and it says it takes an input of 5v.. but you say to solder it to to the battery pads!?? I dont get it. Am I looking at the wrong VTX or am I missing something. I figure I have to run a 5v regulator from the battery, then to the VTX.

@noobFPV 4 года назад

I just tried my TH freestyle. Camera and VTX are unusable. Flies nice and over 7 min with 2x 1s batteries.

@MagicCookieGaming 4 года назад

@@slowentropy4531 The Freestyle is good for about 100 - 150m. The Tinyhawk series is much, much farther than that (assuming you have clear LOS and no interference)

@noobFPV 4 года назад

Hm. I am gonna probably make XT30 mod and make XT30 to 2xPH2.0 connector and use 2s and 1s as needed. I like 1s because they are easier to charge.

@kevinm4225 4 года назад

What about suggested 1s batteries?

@pulsartech2945 3 года назад

As a sort of noob the upgrade process was super fast paced and hard to understand...got a Freestyle 1 on the way because my local FPV group got in on a group buy for $46 each😂 Are there any videos that maybe explain it a bit more in depth?

@noobFPV 4 года назад

Can you please tell me, when you put xm+ instead of integrated receiver, how do you turn off integrated receiver ? Or it does not matter ?

@jfrux 4 года назад

Doesn't matter. Just enable UART1 in Ports tab of beta flight, and in Configuration change to Serial receiver and SBUS

@mateensaliminejad1853 4 года назад

great vid, but unfortunately I just ordered 8 1s 80c 650 man GNB batteries:( Also, I'm kinda scared to take the quad far anyways, although I guess I'm used to the range on the r-xsr on my 5" the camera is aight though lol, but you are def right about the props...although can't the stock vex also run 200mw? Thx

@JohnCuppi 4 года назад

stock vtx is only 25mw

@jeffreestylefpv5907 4 года назад

I wanna buy one but id want a caddx turtle or something similar .

@devinmikulec301 4 года назад

Do you know if they will be making replacement frames for the TH Freestyle

@grandmaster-grouch 4 года назад

Devin Mikulec lets just say it’s EMAX. They have a standard practice for the quads they sell. all emax quad gain the full support of emax America. after market culture for emax is growing week in week out. Also it seems like the big manufactures at some point standardize their hardware meaning available replacement parts for longer periods. The quality of current gear is at least 3 times better from even 3 years ago. Finally as a best practice I do personally. Once I find a quad that I love I would horde spare parts for it when I can. Because sometimes there’s a off chance they pull the model leaving you with no replacement parts to keep flying that quad. Besides the technology is still growing fast. So up to date gear comes every 6 months it feels like. 🍻

@staurossc2010 4 года назад

I did the same upgrade but when I do punch out's, the video goes black and once I pull back on the throttle, the video feed comes back most of the time. What is the issue here?

@droneable1717 4 года назад

Hi, This is probably unnecessary question, but I don't want to fry something for what I saved money.Would the process be the same for flysky fli14+ receiver?

@dronecamps 4 года назад

Should be. Double check what voltage the FLI+ accepts.

@droneable1717 4 года назад

@@dronecamps Thank you.