These RTF kits are getting better and better every year, what’s your opinion? It was a fun making these videos..Hitting the 👍 button is an easy and FREE way to support the channel. Thanks 🙂 Watch the entire TinyHawk III Series Here: TinyHawk III RTF Impressions: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-11QptBbtbG0.html TinyHawk III RTF Full Specs: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nztj8JM_U0M.html TinyHawk III First Flight: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RCYcmegSjRI.html TinyHawk III 5 Things I Like and Dislike: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IpkwOW8O_Rc.html SUBSCRIBE to see upcoming TinyHawk videos. Buy The TinyHawk III RTF Here: bit.ly/3x977ex Buy The TinyHawk III(Drone Only): bit.ly/3DE28Fp Buy The BabyHawk II Here: bit.ly/3czOpDI
It's really is one of the most versatile kits on the market, especially since you can use the radio for other drones. And as you said, the goggles can convert to a monitor.
A new hobbyist here. Excellent analysis, I have subscribed to the channel directly. I'm waiting for my Tinyhawk 3 (the tinygo takes longer to arrive, but I also liked it a lot in your review). After practicing for a while I would like to get the Babyhawk 2, is it a good option? Greetings and thanks for the videos.
Thank you very much. The BabyHawk2 is a GREAT Drone after the TH3 or TG4k. It pretty much started the 3.5 craze. It's so good, I use it as my drone of choice for testing other FPV products like cameras, battery, receivers, and TX.
@@OneManUnmanned Well, it seems that in the end I had bad luck. The camera works, the buzzer works too, but the rest doesn't work at all. I'm quite disappointed with my first drone, so I probably won't buy more from this brand
What do you mean the rest does not work? The buzzer works and the camera works? Do you mean the switch for the buzzer works? Can you clarify what works and what doesn’t? Does the radio communicate with the drone? What about the goggles?
@@OneManUnmanned wow faster than technical service haha In principle, everything seemed to work except for the engines. When I connected it to betaflight it told me something like the output of the engines was not defined and it has not allowed me to activate them from the application either. I have also noticed when I have pressed the button to bind with the transmitter that the board gets very hot. I have written to Bangood's technical service to request a replacement, to see what they say, although in the worst case it could replace the drone itself. Thank you very much for your interest, I owe you a beer
Ok, I hope you get it figured out with Banggood. A couple things to note, the VTX board is on top, and gets hot really fast, and it’s actually normal for it to get extremely hot. Its a good idea to have some airflow(a fan) on it while testing/troubleshooting. Almost all drones will NOT arm unless your throttle(left stick) is all the way down(Idle). Once the left stick is fully down, try to re-arm the drone. My second recommendation would be to re-bind the radio to the drone. There are some instructions on the EMAX website, and Ready Set Drone has made a video specifically for this drone showing how to bind it. I’ll leave it linked below. Hope it helps. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IGgMNDSgkTg.html
Can i use the LDARC 1S 3,7 V 5-weg USB-oplader met XT60-stekkerondersteuning 1S Lipo-batterij PH2.0 1,25 mm stekker voor Mobula7 Moblite7 Whoop FPV Racing Drone charger for 5Pcs URUAV 3.8V 450mAh 50/100C 1S HV 4.35V Lipo Batterij PH2.0 voor Emax Tinyhawk Tiny7 Happymodel Snapper7 EMAX Tinyhawk III 76mm battery’s?
It should already be setup, but you can go into BetaFlight and see if it was setup from the factory. If not, you can assign that mode to one of your free switches.
O Nazgul5 V2 é um drone muito bom pelo preço. Muitos pilotos recomendam, inclusive eu. Eu também fiz uma revisão sobre ele, e vou linká-lo abaixo. bit.ly/3Tegx2F ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9XoyFhce_jQ.html
Good question... The radio will bind to any drone with an Frsky D8 or D16 receiver. I don't know what drone you have, but the TinyHawkII Freestyle and Racer is D8. I don't know if they sell the radio separately, as if yet(can't find it on their website).
EMAX does not share the power output of the radio, but the VTX is rated for 200 mw which is good for approximately 300 meters. You could change the antennas on the goggles for better reception.
Range is subjective..Meaning do you want range to see you drone in your goggles or range to have radio control? If you updated your radio, you could have a better radio range(better control link), but your video would still lose reception at the same stock/factory distance.
I have not upgraded the antennas on these goggles as of yet, but something like a patch/circular polarized set would work amazingly well. Just make sure the polarization antennas on you goggle Mathew the polarization on your drones(right with right or left with left). I always wanted a set of the Lumenier AXII 2 Diversity Bundle. I’ll link it Here: amzn.to/3nIU94h I have some cheaper version on my other box goggles and it works ok. I have them matched to a cheaper patch antenna as well. I’ll leave those linked here as well: amzn.to/3r3HN8W amzn.to/3l0qBxm
I honestly cannot say because they both have different attributes. The TinyGO’s weakness is its radio, while the radio in the TinyHawk has great build quality and simulator support. The TinyHawk III itself is an ok drone, but the TinyGO is a more versatile and powerful drone, offering 2S power and a killer 4K camera with on-board recording. The goggles in both is a draw, with the exception that the TinyHawk’s can convert to a monitor. As I’ve said, it all depends on what you want, and neither kit is perfect. That’s why I titled the video “It’s the best kit to grow in FPV”. It’s not necessarily the best kit, but the best kit to use if you plan on using the included accessories(goggles/radio) to move on to other, more advanced drones.