Emcomm DIY OFF GRID Ham Radio Go Box / Solar Generator Build

Подписаться 47 тыс.

Просмотров 25 тыс.

50% 1

This All In One Comms Box For Preppers Features A 12ah, 12 Volt LiFePO4 Battery, Solar Charge Controller, USB 3.0 & USB-C, Watt Meter, Built In Antenna Port, Anderson Power Pole Ports, & A 25 Watt VHF-UHF Ham Radio / GMRS Radio With Programming Cable.
Most of the tools/materials I'm using can be found on my Amazon Store:*
www.amazon.com...
BNC Female Mount: www.ebay.com/i...
90 Degree BNC Male www.ebay.com/i...
PO4 Power Battery Can Be Found At Gigaparts:
Save 5% Off At Gigaparts With Code K8MRD:
www.gigaparts....
Signal Stuff Signal Stick BNC Antenna: signalstuff.co...
Ed Fong Roll Up Dual Band J-Pole: (make sure to select the Dual Band Roll Up from the options) grapevineamate...
Consider becoming a Patron @ / k8mrdradiostuff
Follow me on Twitter. / k8mrd
Links to many of the things I use can be found here:
www.amazon.com...
As an Amazon Associate I earn from qualifying purchases.
Big Geek Battery Box, k8mrd.square.site
Watch the video here: • Big Geek 12V Ham Radio...
Tri-Lam BuddiStick Pro Counterpoise Support: k8mrd.square.site
K8MRD Radio Stuff Shirts:
Happy Skull Guy: grapevineamate...
Tower of Terror: grapevineamate...
Parks On The Air Merch (non affiliate) www.clubgearon...
Links to other stuff (affiliate where possible)
**Save 10% off your Coax order at ABR Industries. Use code K8MRD10 at checkout.
abrind.com/?sld=2
The SkyHook Portable Mast Antenna Mount (non affiliate)
www.thehamstop....
Use code K8MRDRADIO for 20% off
Save 5% Off At Gigaparts With Code K8MRD:
www.gigaparts....
10% off Messi & Paoloni Coax
Use code K8MRD for 10% off.
messi.it. (or you can order from Gigaparts)
Signal Stuff Signal Stick Antennas:
BNC Antenna: signalstuff.co...
SMA Female Antenna: signalstuff.co...
SMA Male Antenna: signalstuff.co...
Signalstuff Antennas: signalstuff.co...
~~~$15 off most purchases over $65 at Radioddity:
radioddity.refr...
*All Links Are Affiliate Where Possible
#hamradio #prepper #comms

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@Sparkletron Год назад

I love watching different approaches to the same goal. Some suggestions from my own experiences. Don't drill any holes. Instead, take advantage of the steel chassis and use strong neodymium magnets to mount all the components. You definitely don't want any switches mounted on the outside as it's too easy to accidentally flip them. And every hole drilled potentially compromises the chassis in terms of water ingress. Not having dials and switches mounted externally also makes it more stealthy.

@Sonicgott 10 дней назад

These little projects are so fun. I’m betting this is similar to designing an auto-broadcasting box for a fox hunt project. Also, I’d love to see POTA boxes, too. I imagine you have this kind of video already… might have to look for it.

@timel64 Год назад

I thoroughly enjoy the fact that you only have the tools you need on the bench. No distracting random doo-dads, bits & bobs. (unlike some of our other favorite RU-vidrs) 😆 You know who!

@hamradiotube Год назад

Clutter is a no no.

@N8JLS Год назад

Hey, don't talk about Josh like that 😆

@timel64 Год назад

I admire & respect the man, but the table is too distracting. I keep wondering where does the Flipper-zero go in this build?

@pale_2111 Год назад

Looks like there's still plenty of room in the can to put a roll up j-pole antenna in the can as well. The only thing I'd do differently is put some flex seal around the connections to keep it waterproof as much as possible. Cool little project that can come in handy.

@blankreganon5395 Год назад

I was thinking the same about room to store things. If the powerpoles and USB connector be moved to the left of the switch, there would be more room above the radio.

@hamradiotube Год назад

there really isn't as much as you'd think once you take the mic off and cram it in there.

@michaeledmonds3027 Год назад

Very nice real-time build, Mike. You have a gift for electronics and basic construction. Excellent video!

@hamradiotube Год назад

Thank you very much!

@ScottPlude 25 дней назад

A metallica shirt, gun oil, and a cheap radio.... a PERFECT video!

@hamradiotube 23 дня назад

🤘🏻

@seancook4317 9 месяцев назад

thank you for this, i know lots of youtubers use these cans but this the first time ive seen someone like build it from scratch, usually they just show you whats in theirs. awesome video :)

@randallweaver3587 Год назад

I made one of these a few months back. I made a reinforced balsa wood frame and mounted everything to the frame... it is SNUG to slide into the can, but there are no holes drilled into the can, that way the waterproof/EMP (modest) protection remains in tact. I used a 25 watt Retevis RA-25, external speaker and a 4.5 a.h. battery, with room to add a cigarette outlet and some powerpoles. I also wired everything through a single rocker switch to ensure everything was turned off (nothing draining the battery!). I did add a battery direct power connection so that I could charge the battery/power the device with an external source.

@retevisQA Год назад

Cooool build. It is easy to carry to everywhere people go, and seems safety could be a good protect for devices. Great DIY idea. 👍

@hkmp5s Год назад

Wago connectors are so nice.

@Krispin291 2 месяца назад

This is super nice, simple, and detailed instructions! Thank you. I am building this 💯! By the way, Metallica 🤘😎🤘

@chrissewell1608 Год назад

Nice build, with minimal parts, for a bells and whistle Go-Box. I have been planning a similar ammo can design (over a year now!). I keep adding more crap into the design, and it probably won't all fit into the "Fat 50" ammo can! You could always glue some strong Neodium magnets to the radio mount, and then it would just mag mount to the steel can! Allowing for easy In / Out of the radio. Also , if you want to add 110V power, you can get a 110V AC wall-wart power supply (with enough amperage) to properly charge the LifePo4 Battery. Plug it into your Solar Power Input plug. Then you have the option for Solar charging OR Shore Power supply!

@jimcombs1420 2 месяца назад

Love this project.

@beansmalone1305 10 месяцев назад

I would recommend that when using a uni bit like that its safer to put the box on the ground and hold it between your feet and brace the drill against your leg so that if it catches it won't strain your wrist. I'm an electrician and drill through metal boxes all day long and it is possible to sprain your wrist pretty easily even with a relatively weak cordless drill.

@hamradiotube 10 месяцев назад

Well where the heck were you when I was drilling these holes lol!! Yeah that makes a lot of sense. I edited out a lot of drilling and yes it did pull my wrist for sure. Fortunately I didn't hurt myself.

@danielrgusa Год назад

Great build. The only part I’m concerned about is the BNC adapter sticking out the side. Hopefully, it doesn’t get banged up or broken when in transit or being packed away.

@douglasvamateurradioandmore Год назад

Maybe some sort of cover for it to help prevent damage.

@deankq4adj125 Год назад

Well done, nice step-by-step video!

@ufuksarnik5782 5 месяцев назад

Thank you for the simple and clear explanation. thank you for your effort...

@anduril328 Год назад

You can put any dc voltage in to to the solar ports. at home i have a LRS 150-12 power supply feeding the charge controller, You will also get the radio further back if you use a pl259 to bnc-m jumper and a bnc-f bulkhead adapter.

@hamradiotube Год назад

On some, but not all.

@Westoftherockiesyourontheair Год назад

Another great video Mike. Keep them coming!!!

@terryshackelford712 5 месяцев назад

Well done! Thanks much for the video.

@SmokyMtnHiker1 3 месяца назад

Great build. Enjoyed it.

@ZeroHarry Год назад

Nice build, thanks for sharing. I feel the pop-rivets may not be the best choice if you need to drill them out to get the radio out. Cheers

@hamradiotube Год назад

Nah, they're stupid easy to get out. But I have no intention of taking the radio out.

@chrissewell1608 Год назад

Replace them with a magnetic base, on the radio mount. Then you can remove the radio any time.

@route66radioW1WMT Год назад

Very cool build! Great job!

@NovemberOneOscarGrouch Год назад

I wonder if you cleaned up the paint from the top lip of the box and the inside of the can lid if it would act as a faraday cage for the components inside.

@hamradiotube Год назад

Not a chance.

@seancook4317 9 месяцев назад

also, there is a clutch setting on powerdrills that makes it so the bit will stop at a set torque and you wont twist your arm off, it's fun to watch still though lol

@thedirewolfpack3151 9 месяцев назад

Looks really good, but there is a where you have to have it on to charge it no matter what for the fact that he ran it through the switch with the charging kit building

@JohnSmith-xi2oq 6 месяцев назад

I agree with some of the comments about keeping everything internal. If you wanted to do this build, why not use a plastic ammo can. Easier to drill and less susceptable to moisture condensation. I do like the size.

@jasonhoy5402 Год назад

Nice thanks, working on a build of my own right now or at least saving for it

@KS0JD Год назад

My only thought on the design is something to make it easier to take the radio out of the box. But I could have missed the access to the screws that hold the radio to the mount. Great design! 73

@hamradiotube Год назад

You can put screws if you want. I just have no intention of taking the radio out. And if I want too, I can just cut the rivets.

@paulsengupta971 Год назад

I was thinking that a couple of access holes could be drilled in the side for the screws on the one side of the radio. The other side is accessible if the battery comes out.

@BlackBearOutdoors 8 месяцев назад

Weird question: If you are only using one set of anderson power poles to charge, is it needed to connect the second pair? Or can you just take the used one through the charge controller?

@DonDegidio Год назад

Hi Mike, Nice build. I probably have some chassis punches of the correct size for those large holes. Stay safe. 73 WJ3U

@wushock92 Год назад

Nice build, Mike. WØRHP

@hamradiopenpals Год назад

Great build buddy!! I’d buy one of those……😂

@jspearm1983 Месяц назад

Awesome video!!! I want to make one of these now. I just have a question about the fuse and the wiring. I think the fuse was between the battery and the bus bar/new-fangled-wire-nut-device, all the reds were connected together on the other side of the fuse. I suppose this means that power could come from the solar panel, into the charger, and then directly into the radio with no fuse? I’m new to all this so I was just wondering if this is a problem or if it would be better to have an additional fuse on the hot wire going towards the radio.

@dougdaniels Год назад

Definitely building this. Any concern with heat build up in the box with radio and battery in a confined space together?

@hamradiotube Год назад

I'm not concerned, no.

@chrissewell1608 Год назад

Me either! 😅

@notthatguy4515 11 месяцев назад

Awesome Project

@vetinger 5 месяцев назад

so cool project! Thanks!!!

@1originaloutlaw675 Год назад

Great video. I need to build one

@codysden1 11 месяцев назад

I am new to ham radio and am a diet... I am looking to build a box similar to this.. my question is... 2hat battery, charge controller and solar panel(s) will I need for a 25w quad band radio, 4 led lights, a dual 3.0 USB, 12 volt power adapter, baofeng ht charger base, and at least 1 fan (computer) to keep box ventilated and cool? Any help, ideas, advise is greatly appreciated

@offgridamy717 7 месяцев назад

Just built one today . I went with a 20 amp hr battery. Mine was no drill

@noexcuses6727 2 месяца назад

How come there is no Save selector ?

@stahpit1971 11 месяцев назад

cool box

@99Victor 2 месяца назад

What brand of fuse do you prefer? And what amperage was the fuse? I'd thought it was 15a and blue in color. Yours was clear in color? This is why I am asking. Thanks (KK7RDO) 73

@chrissewell1608 Год назад

Does the flexible ham stick, antenna, fit inside the ammo can too?

@mikemcdonald5147 2 месяца назад

bro you took off my favorite sticker. How would one know that it is an ammo can without the HUGE A$$ sticker? now you might confuse someone LOL ;)

@UndyingShadow83 Год назад

Cool build. Any RF issues with everything power related being so close to the radio?

@BlackBearOutdoors 7 месяцев назад

I built one also and I am in fact getting some RF "buzz" in the background when I transmit. Not sure how to get around that. I added Ferrite chokes on the antenna cable going from my radio to the connector on the outside of the box but that did not seem to work.

@mattjames9755 Год назад

With that configuration does the power need to flipped on for the solar to change the battery? If so how would you wire so it would charge while not in use?

@hamradiotube Год назад

It does. You would need to wire the CC separately to the battery. Or just turn the radio off.

@aaronlindemann2669 Год назад

Nice build! Thanks for showing us a detailed look at the process.

@JeffCowan Год назад

Tight!

@wolfwizard406 Год назад

Hum!… Why are so many go boxes designated for uhf vhf, and not as hf in an ammo can.. Nice build Mike!

@hamradiotube Год назад

I actually built a go box for HF way early in my ham journey. I just found it to be too bulky. VHF/UHF is way easier in my opinion. But there are plenty of HF boxes out there. Lots of guys use rack mounts for music gear.

@wolfwizard406 Год назад

Yes those rack mount thing are to heavy to take more than 30 deer unless it has wheels and … Thanks for your efforts to inform the masses..!@@hamradiotube

@andrewb9276 Год назад

Why use a metal 50 cal. box? MTM or Plano seems to me much better. Lighter and easier to drill. You’ve lost any sealing with your holes.

@W8MJL Год назад

Wait, what the heck? No metric tape measure? And you call yourself a ham....LOL 😁In all seriousness Mike great video, would love to see more off the grid builds and videos. Thanks for keepin' it real brother. 73 de W8MJL & K8MKL

@paulsengupta971 Год назад

It surprised my somewhat, being from the UK, as all our tape measures have inches on one side, centimetres on the other.

@uncledanny7 6 месяцев назад

What battery did you use

@hamradiotube 6 месяцев назад

I'm using a Gigaparts PO4Power (LiFePO4) 16AH that I had as a spare that needed a job, so I used that. Can't seem to find it on their page right now but they have a 12AH available. www.gigaparts.com/nsearch/?lp=Mike+K8MRD+Page#?lp=Mike+K8MRD+Page&Stockstatusfilter=Currently+in+stock%21&res_per_page=60&search_return=all&page=2 That'll do the job just the same.

@uncledanny7 6 месяцев назад

@@hamradiotube thanks for the info

@earlbrown525 Год назад

Get yourself a small drill press....you'll thank me.

@hamradiotube Год назад

Nah, I prefer to drill dangerously :)

@nickl3872 4 месяца назад

I was the 1000th like lol

@thaliadezi4352 Год назад

🙌 *Promo sm*

@therobonegroup6532 Год назад

Ham Radio Tube??? I hope you didn't loose too much sleep coming up with the new name?

@hamradiotube Год назад

Wow, that one cut me deep. Where'd you get your insults, the toilet store?

@paulsengupta971 Год назад

@@hamradiotube Do they sell them?

@AD6DMDennis Год назад

Your solar controller is so bougey.

@hamradiotube Год назад

Why thank you

@robertjeffery3237 Год назад

Ummm… Nice build. But clamps save fingers…

@douglasvamateurradioandmore Год назад

Carefully mike, someone might take offense to you talking to about gun oil. Just kidding, no one cares.

@chrissewell1608 Год назад

I'd bet Tim Allen Approves 👍👍🛠📐⚡️

@stocksj 7 дней назад

Really cool with this setup, I'm in the process or rebuilding my Go Box into a Hammo can. Where did you find the right angle red and black wires? Also the small Wegos? Nice compact way of connecting your wires because mine are a mess. Thanks, Jim KK4CWO

@G7VFY Год назад

Is this the shopping channel. Buy more Chinese made junk.

@hamradiotube Год назад

No it's just where people stop by to leave stupid comments.

@ometofu Год назад

agreed. so many youtubers do this with cheapest china junk battery

@__JAG__ 10 дней назад

Nice video. How are you charging without solar?

@IndependentNewsMedia 8 месяцев назад

Nice video, keep up the good work, God bless.

@forrestseaver6050 Месяц назад

What size fuse did you use? Looking to build a similar setup. Great build Mike! I love the solar feature too!

@WaynesWorld69 Год назад

You absolute lunatic! Recklessly brandishing gun oil all over the place while using alcohol! Some sad ham is cracking massive sads right now and about to email you! 😂😂😂 Seriously nice build! I need to make this. Keep up the great work (especially p*ssing off "sad hams") 😂

@FirstUnitedTactical 7 месяцев назад

Awesome Vid!! Great job!!

@tylerblock3377 7 месяцев назад

If I wanted to have an HF/VHF/UHF go box, would adding a second radio be as simple as adding another antenna port on the case and another set of wago connection ports from the battery to the other radio?

@rickhartnett3971 Год назад

Even if I never build it the video was very informative and I learned quite a bit. I'm sure that informaion will be used in other projects. Thanks a lot.

@hamradiotube Год назад

Well now you have to build it!

@BlackBearOutdoors 8 месяцев назад

Great build! Can I assume the USB is an additional charging option? Also how far was that repeater you hit?

@hamradiotube 8 месяцев назад

The USB will not charge the battery. It's for charging your devices. The repeater is about ~12 miles away.

@BlackBearOutdoors 8 месяцев назад

@@hamradiotube Great thanks for the info and posting a cool project!

@BlackBearOutdoors 8 месяцев назад

I am starting a similar build and I am pretty stocked to see how it will turn out. Quick question, the black and yellow power poles are for solar as per your video. What is the red and black for and what is your alternative charging method to solar? Thanks!

@blankreganon5395 Год назад

Great build! I think this would be a great next project for me. If the radio had a crossband repeater built in, it could be used to provide access into a repeater that can't be accessed directly using a HT.

@hamradiotube Год назад

Yeah you could do just about anything you can think of. So long as it fits that is.

@knifeswitch5973 Год назад

How does one work repeaters when the grid is down?

@Ei2iP 11 месяцев назад

The sound of a metal box been carried around, would be so annoying, not for me, I'll stick to my plastic Go Box, nicer look and feel

@hamradiotube 11 месяцев назад

What? There is no sound. It's an inanimate object. And plastic won't act as a ground for your antenna, but hey, you do you.

@christominded4726 7 месяцев назад

Why do I feel nervous about safety with this video? LOL😂 Nice build!

@hamradiotube 7 месяцев назад

What is "safety"?

@shep6123 2 месяца назад

Nice 👍

@giossico 10 месяцев назад

like it

@clems6989 8 месяцев назад

I like the mounting and use of the antenna. Good job thanks for sharing it..

@sweeperdave1 5 месяцев назад

Thanks for this. Gonna build one this week!

@williammitchell6065 6 месяцев назад

Hey Mike, I do all my drilling and hole cutting inside black tote, it contains the jobs and metal shavings and filings as I learn from your projects, your a great teacher sir!!! thank you for the continuous education - N1WDM 73

@KC7ZXYtube Год назад

Absolutely love the seo optimized name for this video. Seriously. That's about the best I've seen. 👌 Great video and great box build, too. 😊 Take care, and 73!

@chronobot2001 7 месяцев назад

Nice, although I'm not a fan of pop rivets. I know the minute I pop rivets something I am going to need to get back in there and I'll have to drill them out. Really nice build.

@joshuacalbick4834 Год назад

Nice build, inspires ideas. Remember kids, it's only dangerous if someone gets hurt.

@K9TPT Год назад

How many times did you re record because you said K8MRD Radio Stuff. ???😂

@MikeN2MAK Год назад

Very nice, very nice.

@douglasvamateurradioandmore Год назад

A box for flying. Thanks for the idea Mike

@AndrewWells527 Год назад

17:00 how long were you waiting to say that?

@richardkennedy815 Год назад

Great job... Thank you

@SoopSammich339 11 месяцев назад

i made this today. very cool

@kennyray1381 Год назад

Nice build Mike!

@greyshape4247 5 месяцев назад

Love this! What's more, is I found your excellent video by watching your vid on Sad Ham comments. Thanks much!

@hamradiotube 5 месяцев назад

Awesome! Thank you!

@hemitj Год назад

AWESOME project & execution! Thank you!

@hamradiotube Год назад

Hey thanks so much!

@Bugkiller991 Год назад

Sweet!

@hamradiotube Год назад

Thank you

@ometofu Год назад

excellent video, my recommendation is to update the battery system to tool battery like dewalt / milwaukee to supply the 12v with a step down transformer. You then immediately have multiple spare batteries and ready to go when SHTF... and you can easily charge tool battery with solar panel with usb c output too directly to many of these tool battery system.

@hamradiotube Год назад

That would be a huge downgrade.

@ometofu Год назад

@@hamradiotube downgrade? u trust no name battery and majority of prepper don’t check their equipment frequently. U can get 20v dewalt with 12ah or just 6ah will give u the same amount of energy

@hamradiotube Год назад

@@ometofu Yes. A downgrade. I literally do not care what other people have. And why would I care what a pepper would have? Plus, a 20 volt battery is too much voltage and it would be stupid to use that with a buck converter. It's inefficient. Plus, the batteries you are suggesting are LiPo with an average life of 3-400 cycles. LiFePO4 has an average lifespan of 2000 cycles. Plus, LiPo batteries are unstable as hell. LiFePO4 won't blow up on you.

@ometofu Год назад

@@hamradiotube u opened statement “prepper” son. people trust their tool battery more than ur china made low quality battery.

@n3jw34 Год назад

Satan and this guy are proud! Still think that you should come up with a company logo featuring an interleaved line drawing of the both of you sitting at the "Skunk Works" bench!!! He could be perched on your shoulder and supervising the processes.