Build an EmComm or Radio Go Box

Подписаться 19 тыс.

Просмотров 20 тыс.

50% 1

In this video we’ll take a look at building a EmComm or Radio Go Box. I’ll provide links to the parts used in the build below.
Help support the channel by becoming a member or making a single donation on Buy Me a Coffee. buymeacoffee.c...
Many of the links listed below are affiliate links.
Step Bit
amzn.to/3qZvLj1
Velcro Strips
amzn.to/3JsChFm
Covered Switches
amzn.to/3NIJcMV
PL 239 Bulkhead Connector
amzn.to/3CP9VRH
SO 239 Socket Covers
amzn.to/3NIosVB
10 AH LifePo4 Battery
amzn.to/3Nls5zu
F2 Connector Cable for Battery
amzn.to/3NJBaU7
Binding Posts
amzn.to/3NJsugw
Distribution Block
amzn.to/3Nm1ank
Patch Cables
amzn.to/3PuSpd8
Outlet Socket Panel
amzn.to/3CGpKKA
Speaker
amzn.to/3qSrv4B
Project Box
amzn.to/43TdWAN
Supacool Mesh Bags
amzn.to/449sgW1
Mat
amzn.to/46lcjgQ
Apache Case
www.harborfrei...
Crimper Kit
www.harborfrei...
Affiliate Statement:
Some of the links above are affiliate links. This means that if you click on them and buy something, I get a small commission. You don't pay more by clicking these links than if you just went to the retailer’s web site directly. Thanks for supporting The Gadget Talk Channel!
Store statement:
Please visit the Radio Related section of our Amazon Store for interesting and essential items to get the most from your radio and related activities.
www.amazon.com...

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@sweeperdave1 3 месяца назад

Of all the DIY, radio-in-a-box videos, this makes the most sense and is the most useful. Thanks much!

@GadgetTalk4U 3 месяца назад

Glad it was helpful!

@facebookinger 8 месяцев назад

Thank you for showing us your project. I had fun watching it. :) 73!

@MarioDepo-dv3ql 7 месяцев назад

Great build. Thank you for sharing.

@johnnyzippo7109 3 месяца назад

I scored a Ramco hard case with spring loaded metal handle . Originally this particular case housed a very early starlight viewing optic . The overall construction of the box is tank line and the air pressure release valve is a really nice bit of purple anodized aluminum . I will use this video and build as my go to for my build , thank you !

@GadgetTalk4U 3 месяца назад

You're welcome. Have fun with your project!

@benjosevilla Год назад

Jim - nice build and great video as always. I too just finished my GMRS go box using mostly items I already own; GM-30 HT, BTech 30 Watt amp. I too bought my case from HF but one size smaller as unlike your 3 radio setup, mine is just one HT and an amp. I used a 10 ah LifePO4 (bday gift from my daughter) for power and also created my own switch box using a PVC utility box and the same 4 pc switch, USB and cig outlet. My goal is to have everything in the case so I went with a Midland MXTA13 micro antenna for $20 and got a 6x8 plate that I magnet mount on the lid for groundplane, the MXTA13 has a builtin mag mount so it easily sticks on the sheet and both sits on the lid when open. I know this does not give me the best range but fits my criteria of all inside the box when closed. SWR is decent @1.3 with the ground plane. Yes, I do keep my the SureCom SW-33 in the case. I do have a mobile mag mount and a taller 6dbi nmo that I can use if needed but those are not in the case. I do have the AC battery charger in the case too. I have a 40W folding solar that I can use to charge it outdoors. Again an extra out side of the box item. I can share pictures or short video with you if you like. Thank you and keep it coming.

@Bullwinkl360 Год назад

How long does your battery last?

@benjosevilla Год назад

@@Bullwinkl360 I think it is rated for 2000 + cycles recharges.

@Bullwinkl360 Год назад

@benjosevilla I'm sorry I didn't state my question correctly. How long can you use the radio before the battery needs recharging? And as the battery's voltage decreases, what is the lowest voltage you can still transmit and receive. I'm a noob to all of this.

@benjosevilla Год назад

@@Bullwinkl360 - I have the box on now for over 24 hours with mostly receive and a couple of key ups and conversations. It is truly during transmission that i consumes. I only have a volt meter so I can only see the voltage and so far steady at 13 on RX and around 12.1 while TX. The handheld has usbc which is constantly powered too.

@GadgetTalk4U Год назад

Sounds cool. Thanks for sharing in some detail. Have fun with it. Cheers.

@richmondtolbert7280 9 месяцев назад

I found your video very inspiring and it led me to build my own box

@GadgetTalk4U 9 месяцев назад

Great. The point was to inspire. Very cool.

@oldmangaming1404 4 месяца назад

I used your parts list and made me a EMCOMM box, but I use HT's and BTECH amp and didn't drill any holes in the box wish I could send you pictures. 😀 also passed my Tech license.

@GadgetTalk4U 4 месяца назад

Very cool. Congratulations!

@DougCrawford-pe5ci 3 месяца назад

Excellent vid w/ great explanations. Afraid everything is 30% to 50% more expensive here in Canada. 73, VA3PHO.

@ROMAN138 8 месяцев назад

Thank you Sir for your video. One of the few that actually makes sense to me.

@thomasmanson1119 8 месяцев назад

Roman, do you have other Apache or Pelican layouts that you like? 73, Tom KC3QAC

@ROMAN138 8 месяцев назад

@@thomasmanson1119 I have seen other layouts with similar setups like the one in this video. This video in particular was a bit of a lightbulb moment for me with regard to mobility in the field.

@pnowikow Месяц назад

Very nice

@GadgetTalk4U Месяц назад

Thanks. Cheers.

@ometofu 11 месяцев назад

it seen many of this type of Radio to go boxes.. great idea but if i can make a recommendation, instead of using a dedicated battery, just use a tool battery like dewalt or Milwaukee and use a step down transformer to provide the 12v. So you will always have your battery ready or extra to go when SHTF...

@AntonioClaudioMichael 8 месяцев назад

Very nice Multi Band go box 10:41 @Gadget Talk

@GadgetTalk4U 8 месяцев назад

Thanks for watching and commenting.

@AntonioClaudioMichael 8 месяцев назад

@@GadgetTalk4U your welcome sir

@user-sq8xt9gk7u 5 месяцев назад

Some of these radios can work as a crossband repeater, just need to use a cable connecting the mike ports and enable an option in menu.

@thomasmanson1119 8 месяцев назад

Great video Jim. I’m not a fan of Radiotity but I love your ideas and detailing of the project. I’m still scanning for more ideas based on the Apache boxes or the Pelicans of similar size (although I know they’re much more expensive (but I already have a 1550) BTW, I noticed your T-38 in a video some time ago. I was USAF as well but spent my time maintaining servicing and potentially launching a Titan II from Wichita, KS until I resigned from the USAF and went to work for Beech and then NASA at Goddard. My brother however beat me to NASA and in fact flew their T-38s in Houston and around the country. 73, Tom KC3QAC

@GadgetTalk4U 8 месяцев назад

Very cool. Thanks for sharing.

@thomasbain319 7 месяцев назад

Wonderful video!!! Thank you!!!

@George_S.G Год назад

Amazing work !!!

@johnfleming8648 10 месяцев назад

Outstanding video sir.

@GadgetTalk4U 10 месяцев назад

Thank you kindly

@Ressy66 Год назад

That's really nice Jim, very well done, congrats. only thing missing is a HF rig, even QRP rig - but as you said, that was not your focus, be interesting to see if you could incorporate HF, with the HF duty cycle of SSB, it would overall I think draw less power than a 2m/70cm rig, but I think even one of them would probably mean removing one of your other more focused rigs. Still, damn nice job.

@jordanmkurtz 6 месяцев назад

What adapter do you use for the back of the DB25G for your external speaker? I have not found one that works.

@Worthrhetime 11 месяцев назад

Very cool. Thx

@ronkramer7563 11 месяцев назад

Very very nice.

@DaninVirginia 10 месяцев назад

Excellent project! I didn’t see how the radios were secured. Did you simply screw their mounting brackets to the plywood?

@GadgetTalk4U 10 месяцев назад

Yes. Nothing fancy.

@joejoslyn7667 10 месяцев назад

Great video!

@GadgetTalk4U 10 месяцев назад

Thanks!

@Bullwinkl360 Год назад

Nice build. Just curious, how long does the battery last and what are you charging it with?

@GadgetTalk4U Год назад

Sorry about being late responding. I did this video talking about computing battery life. It has a link to a good calculator. So many things to consider that are unique to one's set-up. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7-RQYRTcKJ4.html Here's a link to a cheap charger I use from Amazon. amzn.to/3NBln8L

@MeOnTech 9 месяцев назад

Nice

@cpeachpeach 7 месяцев назад

What did you use for antennas

@swartzautoman2 6 месяцев назад

My big concerns here are the amount of connections. I see these all as fail points, the less the better. Do you "need" a toggle switch to power another toggle switch.

@GadgetTalk4U 6 месяцев назад

The red toggle switch is the master switch. It turns everything on. The rocker switch in the accessory panel was part of the kit and the included wires expected the 6 components. The wires to the accessories were also separately fused. The covered master switch prevents anything in the case from turning something on and draining the battery. To answer your question, for me, yes. Thanks for watching and commenting. Valid point.

@swartzautoman2 6 месяцев назад

@GadgetTalk4U For clarity purposes, I'm not hating on your build. I've been watching lots of videos of portable radio setups as I'm working on a build of my own. I'm going the backpack 🎒 route and fabricating an aluminum frame for it all. I started adding other components like toggle switches and voltage ⚡️ meter, and I stopped mid build. The radio already has an on/off switch, my radio already has a volt meter. I asked myself, how are you going to fix any of this in the field "when" it fails. I didn't want to carry extra parts or a repair kit. I quickly decided to only have as little of a wire harness as absolutely needed to run everything properly. Less to fail later was my thanking.

@GadgetTalk4U 6 месяцев назад

@swartzautoman2 I took no offense. Love hearing other's ideas and perspectives. Sounds like you have a fun project in mind. Cheers.

@offgridamy717 7 месяцев назад

I did the ammo can today . I went with 20 amp hour battery used the same power block. Is that case plastic?

@aaronbradshaw3839 3 месяца назад

Can you tell me how the banana plugs charge the battery? What charger are you using?

@GadgetTalk4U 3 месяца назад

I use the banana plugs for studs or lugs to attach the alligator clips from an inexpensive Amazon multi- chemistry charger. You could easily clip off the alligator clips and add a connector of your choice such as Anderson power poles, etc.

@aaronbradshaw3839 3 месяца назад

@@GadgetTalk4U thank you

@KOSTAS.K 4 месяца назад

Nice try nice work , What battery use?

@GadgetTalk4U 4 месяца назад

It is listed in the description.

@KOSTAS.K 4 месяца назад

I think is too small battery 10ah.. or not ? I have a crt 2000 AM/FM 15W and searching for battery, but I have not Idea what is better...

@GadgetTalk4U 4 месяца назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7-RQYRTcKJ4.htmlsi=U35TrOstESt9r37m

@thomasschmidt9864 7 месяцев назад

Can I ask why you did not wire the voltmeter, USB socket and binding post to dedicated circuits on the fuse block?

@GadgetTalk4U 7 месяцев назад

I did. Check the diagram vs. the photo. Wires got dropped out of frame, so are hard to follow.

@thomasschmidt9864 7 месяцев назад

The diagram looks like your CB, GMRS and VHF/UHF have dedicated circuits, but it looks like the voltmeter, USB and 12v are wired together in series through the switch to one circuit on the fuse block. Am I misreading it?

@GadgetTalk4U 7 месяцев назад

@@thomasschmidt9864 The kit came with the expectation that it is one component, not 4. It also comes with the wires pre assembled to wire the elements together. The panel kit is also fused separately. You certainly could do what you describe if you wanted to use a bunch of slots and build your own wires. Wiring each separately would negate the need for a panel switch. Cheers.

@thomasschmidt9864 7 месяцев назад

Ok, thank you. By the way great video.@@GadgetTalk4U

@thomasschmidt9864 7 месяцев назад

One more question: What amperage fuse do you use for the sockets/USB/12 binding post circuit?