No video :(

EME DLE111 Starter001

Подписаться 302

Просмотров 52 тыс.

50% 1

Bench testing the new EME DLE111 Starter
The 3542 outrunner Electric motor that powers the starter pulls 16.38 amps and uses 192.9 watts for a cold starts. It pulls 8.19 amps and uses 95.9 watts for warm starts.
The DLE111 tacks 1400 rpm at reliable idle and 6600 rpm at full throttle on a 28 x 8 Xoar prop. That calculates to 56.29 pounds of static thrust or 11.034 HP. The engine the latest V3 and is new with only about 8 ounces of gas run through it for now.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@JuanSpeedAudio1 3 года назад

👏🏼👏🏼👏🏼👍👍👍👌🏼👌🏼👌🏼

@hillscanlon2717 3 года назад

Great work, do you have any instructions on how to fit this as I've got one but never came with any information thanks 😊

@gsmith6879 3 года назад

No instructions but fairly intuitive to install. You will have to pull the original hub and then install the starter hub. I did mine with a gear puller.

@ricardomartins712 3 года назад

I believe the same starter will work on dle 120 and dle 85, right? I have a dle 85 but I'm not sure if I can use this

@gsmith6879 3 года назад

It won't fit the DLE 85 and will fit the 120 with some modifications.

@hillscanlon2717 3 года назад

Thanks what size battery are you using Thanks.

@gsmith6879 3 года назад

3 cell 1000mah 40C LiPo pack

@ronwillets1471 2 года назад

Hi i have a dl 100 ...would you have any idea if this woyld be compatible i have two other eme autostarts on dle 55 's T i a Ron

@pawezawadzki3018 8 лет назад

Congratulation This is motor NTM 35-42 Series 1000KV / 700W on 3s Lipol? How is starter to motor gear ratio?

@gsmith6879 8 лет назад

Yes, a 3 cell 1000mah LiPo. Good for a weekend of starts. The gear ratio does the job but I don't know what the numbers are and the starter is buried in the cowl. So can't count the teeth. It has be operating reliably for over two years now.

@pawezawadzki3018 8 лет назад

How is about starter system weight? For me the total gear ratio si about 1:20. I see that electric motor don't turn after engine run. In this starter is use one-wa bearing? How do you think? It is possible use this setup without one-wa bearing as starter-generator?

@gsmith6879 8 лет назад

I think the weight was about a pound but don't remember exactly. The main gear has a Sprag one way clutch bearing. The bearings in the secondary gears do not have strong enough bearings to handle the loads of a generator,