Ender 3 v3 SE Extruder clogging Problem solving and Extruder Cleaning

Подписаться 163

Просмотров 14 тыс.

50% 1

Hello friends! Today, I will show you how we can solve the extruder clogging problem of the Creality Ender 3 V3 SE 3D printer and how we can clean the extruder.
Extruder blockages are a common problem in the 3D printing process and finding the right solution is very important. By watching this video, you will learn step by step how to solve extruder blockages and increase the performance of your printer.
I will also emphasize the importance of extruder cleaning. A clean extruder helps you achieve better quality prints and extends the life of your printer.
Remember, you can solve your problems and make your 3D printing experience more enjoyable by using the methods we shared in this video.
If you like our video, don't forget to like it and subscribe to our channel! Also, do not forget to share your comments and feedback with us. We can't wait to watch it already!

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@tehmace 3 месяца назад

Thanks for this, helped me figure out that I managed to get some filament stuck in the white tube, which ended up being super easy to clear!

@BigBoxOrange 3 месяца назад

I'm so glad it worked for you.

@CourteAlain День назад

Thanks a lot for your video. Following step by step , I could manage a problem of filament clogging and blocking. Thanks to you, I was able to locate the problem and remove a filament plug at the start of the extruder. you have been a great help to me. Congralutions.

@theonly0ne1 Месяц назад

Im actually shocked people have not learned these days that you don't use WD-40 as lubricant, atleast not the 'regular' multi-purpose one. You will be regretting it in the long run, so for anyone who actually used the regular WD-40 instead of the one of the specialized versions that are specifically made for lubing parts. (e.g. Dry Lube or White Lithium Grease), use some isopropyl-alcohol to wipe the multi-use wd-40 off and then get some real lube up in there. Also to be fair, it would have been better if you atleast guided the people through this or smth, for me sitting through this vid was the the long version of googling my problem and having the only result being one sentence; "Take it apart lol"

@BigBoxOrange 29 дней назад

WD-40 lubrication is the most common solution that has proven itself for cleaning. Cleaning and lubrication done in this way has yielded successful results in the long term. It has been tested by me.

@irisalbarn 23 часа назад

thanks! it helped. you saved a lot of my filament :))))))))

@williamvoyce1400 4 месяца назад

You clearly need to change or clean the extruder nossel

@peterstoltz3296 4 месяца назад

Music 🎶 was not needed, but the video is good maybe turn down the music to lower 🤔

@BigBoxOrange 3 месяца назад

The general user wants to listen to music that will not bore them. Thank you for your interest.

@ventaslogiteccargologistic2644 26 дней назад

I have a problem with my ender 3 v3 se with Nebula kit, it works super well without any problem, but it started to prime badly, everything points to a leveling problem, I have tried to level it in many ways and adjust the z offset, but nothing works, I think it is the bed that is twisted but I can not find the spare part. Can you help me.

@BigBoxOrange 25 дней назад

The tip of the BL touch may also be bent or the cable may be disconnected. Make sure this part is intact.

@sufyjr536 2 месяца назад

1. Just increase that hotend temperature beyond manufacturers recommendation for steady flow of filament i.e from 210° to 230°+, 2. change that white tube to the much better blue Capricorn ptfe tube. Learned the hard way using from my still using today old tough CR10...

@BigBoxOrange 2 месяца назад

Thank you, I will try it soon.

@caiofidry2872 3 месяца назад

Thanks brow! You saved me so much! Your worries about cam angles are impressive, very good stuff!!!

@toetie2019 3 месяца назад

Thanks for this. Do the gears need to be perfectly clean? Like there's some oily black substance on it which isn't easy to remove, I'm guessing that's for lubrication and shouldn't be removed, right? There were also tons of small (what I think is PLA) particles ground up in there

@BigBoxOrange 3 месяца назад

Black small particles, residue from black "pla". When the extruder is stressed, the gears tear particles from the filament. After a long time, these particles make it difficult for the gears to grip. As a result, it results in bad press. The material I use also ensures the lubrication of the gears.

@PKuchin Месяц назад

А как определить, что его необходимо чистить? Как проявляется, в каком дефекте печати?

@BigBoxOrange Месяц назад

При потере твердости печати (хрупкости и межслоевого зазора) и увеличении углублений и выступов между слоями

@warrenhen-boisen4340 4 месяца назад

Thank you so much for the video, this helped me with my Ender V3 KE, appreciate the effort, angle, style of video it makes it easy to follow, well done keep it up

@indalecio21 2 месяца назад

The printer underextrudes mid print constantly now. I changed nozzle, unclogged everything, cleaned gears, tightened the extruder spring inside. Changed the inside bowder to a PTFE one. I have done everything. I have used the Creality slicer. I added more walls. Failure I used Cura 5.7 with Ender 3 V3 SE support. It somewhat fixed it but not totally. Printer will print flawlessly for a few hours then straight up starts underextruding near the Z seams. I ordered an extruder replacement and will try installing it once it arrives in case the gears inside have been worn out. If that doesnt solve it, this printer is basically a failure after some hundreds hours of printing.

@CharacterZero 2 месяца назад

I have the same exact prob. Did you get a fix?

@BigBoxOrange 2 месяца назад

I guess, have you completely cleaned the residues left on the Extruder gears? Half an hour after the printer operates, the heat begins to spread upwards. If the gears are full, the filament heats up as the gears get hot. As filament hardness decreases, filament thrust decreases.

@spartacus09ful 29 дней назад

Cheers, great help for the KE also, cleared a blockage in the tube the filament goes through(the one before the white bowden tube). Thanks again for the great help.

@BigBoxOrange 25 дней назад

Glad I could help.

@JamesThompson-xl4yu 2 месяца назад

Did you leave the WD40 on the gears? And what to do if the gears do not align with each other as mine was offset by half a gear to not align with the filament properly. I notice my extrude and retract make a sound like it is rubbing. Thanks

@BigBoxOrange 2 месяца назад

If the gears are not aligned, there is a breakage or crack in the part. I recommend that you replace the extruder mechanism as soon as possible.

@robertosabatino7213 3 месяца назад

Very useful video, thanks 👏👏👏👍

@oskiboski069 5 месяцев назад

Nagra pan film o konfiguracjii itp zeby byly ladne wydruki z napisami po polsku?

@vanloggins Месяц назад

thanks for posting this video. I haven't taken the extruder apart yet for one of these, but had done basically the same thing on a sprite extruder pro extruder. This was very well documented for each step, one of my Ender 3 V3 SE printers has the extruder clicking on it, and it's underextruding so I am going to try this out tomorrow evening to get it back up and running.

@frannmira 11 дней назад

Hi! How it went? Im looking to do the same

@vanloggins 5 дней назад

@@frannmira no problems, the procedure was easy enough to follow

@SeanSR 4 месяца назад

Music waaaaaay to loud. :(

@BigBoxOrange 4 месяца назад

Sorry, I will pay attention in my next videos :(

@koreanmister3d 3 месяца назад

hello? nice information. thanks..

@BigBoxOrange 3 месяца назад

I'm glad you liked it.

@RobertJohnsonLasers 4 месяца назад

Thanks for making this vid, I may have to do the same thing to my SE.

@RobertJohnsonLasers 4 месяца назад

I can actually smell the WD-40!!! 😂😂😂

@delspark 3 месяца назад

My white tube seems to have deformed slightly causing blocks constantly 🤷‍♂️

@BigBoxOrange 3 месяца назад

If your Teflon pipe is damaged, you should replace it. As the filament heats up, it may snarl in damaged areas. Do not throw away your old pipe, cut it precisely to the same size as your new pipe. If it is short or long, you may not get quality prints.

@delspark 3 месяца назад

@@BigBoxOrange got some replacement coming 👍