Enough is Enough...Time To Call A Mechanic! - Part 1 

WHEN WAS THIS VIDEO TAKING APPROXMATLY

JUST WONDERING WE LIKE IF YOU GUYS WOULD SAY THE DATE OF THE VIDEO

yeah seems this video was started before you guys redid the pins and bearings in the other bud tractor

This video was filmed on-and-off throughout the last few months. We're constantly switching between projects due to shipping delays for tractor parts. As soon as a project is finished, we gather all the footage and upload a video. The end of the video is closer to where we're at currently.

@@saskcanada94 “WE” don’t care. Seems like YOU care. Also your caps lock is on

This is words of life but unfortunately sometimes we don’t realize till too late it wasn’t

I am certain my last words, if only in my brain, will be "Well sh..t, that didn´t work."

Oh boy 🙄

He's the main commenter for the channel, like down here in the comments.

I hope he comments on my comment........😊

I noticed me still in the middle of all the activities, still getting his hands(clothes)dirty🥰

I know that guy........it doesn't take long before his clothes matches the equipment hes working on........must do it to camouflage himself while filming..........😊

Yes sir on the getting angry doesn’t help at all I’m gonna keep them word’s in my head sir

I also take care of my disabled mother she is deaf so it can get very frustrating

@@6181green yeah me mums had 3 falls in 2 years and thing is Dr and hospital appointments are difficult when you don't drive lol

Thanks Steve!

He knows a lot because he’s a mechanic. 🤷🏻‍♂️

Is this a women that wrote this?

Wouldn’t it be nice if a number could be put on how much money this farm has saved by being able to machine things out. I bet it would be staggering

Ole boy is a heck of a hand. That machining was impressive. I guess I should nite that all three of these Fellas are jam-up hands. They all are incredibly talented in a multitude of ways. They could all make a solid living in a handful of different trades. Pretty impressive family!

I watch a machining channel that's in Australia & this guy has made his own "shop built tools" due to it dealt with a job he was repairing he could not complete without this one tool that he needed. Look up Cutting Edge Engineering - Shop Made Tools. The largest shop made tool he made was an internal borning bar that was about 12 inches across and almost 8 feet long for doing internal work on cylinder barrels; he used a surplus rod he had in stock as hydraulic cylinder material is the same as tool steel for hardness.

Yes because ordering a part makes you less of a farmer or man right? 🙄

It's also called "time is money" and farmers need to save money in times like this. Any mechanic a farmer would be paying big bucks to work on their equipment.@@HAWKSTA24

@HAWKSTA24 You always offended so easily? Dude didn't say anything about anyone being less of a man. He simply said their craftsmanship is one reason people enjoy their content so much, and I don't think he's wrong. They're incredibly crafty folks , and it's enjoyable to watch them create. News fkash: Welkers order parts, too....

Thanks for the kind words! We appreciate it!

​@@WelkerFarmswere you at a funeral where they buried your grandmother

I’m sure they’re happy that their fortune cookie wisdom helps you. Toughen up and take control of your life instead of getting your wisdom from some farmers. Thats free advise

@@HAWKSTA24 Jesus love you

Only a few more house videos left! We've got lots of projects planned once we're finished!

@@WelkerFarms good to hear

Appreciate the advice! Will try this next time 👌

Someone giving their age away here 🤣🤣🤣 It is actually the oil of peppermint that is in milk of magnesia that makes it a great lubricant..

Milk of magnesia is magnesium hydroxide. From Macrorubber web site. "When exposed to magnesium hydroxide, rubber can suffer from a variety of common failure types. These include cracking and embrittlement of the rubber, swelling, softening and discoloration. Additionally, rubber can become brittle and fragile when exposed to magnesium hydroxide, leading to its eventual failure. The rubber may also become more prone to ozone attack and ultraviolet radiation, leading to further degradation and damage." I hope it is no longer used.

Agreed!

Glad you enjoyed it!

That's awesome 👍

Appreciate your story and your determination to push on through adverseries. We pray Gods grace with mercy brings healing.

@RobertWelkerFarmerBobthank you, i find your family to be insperational with all you share with people you don't know. I appreciate your prayers, because i don't have much family left, and i believe that prayer does help other's. I have always kept your family in my prayers during hard time's of crop loss, and prayed for Scott when his arm was injured, because i had a bad work injury that caused me a lot of problems now, because worker's comp thought i was lying about my injuries because i wasn't crying or flipping out. I worked for nine month's through fall and winter in the cemetery that i ran for ten year's. They finally did an mri, and my ACL was torn off the bone, i then had to do physical therapy for that, but still had horrible pain in my ankle and right leg, and back. I was sent to an ankle surgeon who took an x-ray higher up my leg, and was shocked that my outer leg bone had broken and healed together in a cross shape with pointed ends that could have caused a blood clot. I had to have my leg rebroke, plated, and my ankle bones screwed together to heal the dead cartilage they cut out, and to heal the stretched out ligaments. The really interesting thing about the whole ordeal, was the PT worker who worked with me after the accident, and had me come in and do physical therapy for six month's. She left the comp office and transferred to the practice of my ankle surgeon. The first thing she did was tell me how sorry she was, and that if she ever saw me again she would never doubt me. I forgave her right away, because i knew that there are so many people who cheat the system, that they question everyone. I always figured that maybe i went through that because there are a lot of people who really do have injuries but are being judged. Had i gotten treatment right away, i wouldn't have as much trouble right now. I really was affected when Scott was hurt, because i was injured by getting pinned between a backhoe, and a stack of granite memorial bases. I literally had a sick feeling watching the video that showed the accident. I prayed for him, because i knew that with that kind of damage there can be permanent nerve damage, and complications. I was so glad that he didn't lose the use of his hand and arm. Sorry to go on for so long, but i just wanted share my experience from 2010, and why seeing Scott get hurt like that really worried me, and how much respect i have for the thing's ha has shared about himself, and that there are people who appreciate his honesty, and the struggles he has gone through in his life, and being confident enough to share his struggles at a time when there are people on youtube who can be very cruel and judgmental. Both Scott and Nick are such good dad's and husband's, role models for a society where multiple marriages are so common. You are such a good role model as well, and it show's through how well you raised your kid's. G-d bless your family, and the furry friend's.

Thanks! God bless!

Stay positive buddy times will most definitely improve for you the most inportant thing is to keep moving forward and dont stress about the past or future God bless you and your family.

More to come!

Good to hear!

That's the plan! It isn't done yet so once it is wrapped up part two will come