Welcome to Crimson Guitars (CG)HQ ru-vid.com....
In this episode, Ben is working on the neck of the guitar. He goes from an uncut fretboard, finally cured from its Cactus Juice soaking; to a neck ready to be carved and have frets installed.
This guitar is being made using a very soft wood and as such the neck is stabilised with both the usual truss rod and carbon fibre stiffening rods.
#customguitar #electricguitar #guitardesign #custombuild #oldwood
Chapters:
0:00 Introduction & a recap
0:36 Unclamping & thicknessing the fretboard
3:00 The problems with really softwood
4:14 Working on the neck & headstock
6:43 Another masking tape trick...for templates
7:40 On to the Router table & the Oscillating Belt Sander
9:15 Installing the truss rod and stiffening carbon fibre rods into the neck
11:07 Routing the truss rod channel
12:41 Using small chisels to clean up the channels
14:38 Gluing in the stiffening rods, safely
15:34 How Ben stops the truss rod rattling under the fretboard
17:00 Gluing on the fretboard
18:35 Clamps! And clean up the excess
19:46 Declamping the neck
20:44 Removing the excess on the neck and fretboard
22:16 On the belt sander taking the headstock to the correct thickness
23:10 Radiusing the fretboard with a hand plane
24:40 Then on to a radius sanding block & talking about carving the neck
26:32 Quiet while Ben films & a look ahead
Check out our new Discord server for Guitar Building Goodness here / discord
Join this channel to get access to the perks:
/ @crimsoncustomguitars and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link luthiersquestiontime.buzzspro...
Ben's livestream camera setup includes: the Blackmagic ATEM Mini Pro, Prime Cameras (Front facing and over bench) Canon EOS 250D, suspended from the ceiling (bench side) Canon EOS 90D, and on the movable tripod a Canon M6 Mark II
www.cameracentreuk.com/crimson
Music used in this video from Epidemic Sound - www.epidemicsound.com/referra...
___________________________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - www.tritontools.com/en-GB
ISOtunes Bluetooth Hearing Protection - bit.ly/36YmKro
Wagner Meters - www.wagnermeters.com/
Leatherman - www.leatherman.co.uk/
Workshop Heaven - www.workshopheaven.com/
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for 10% OFF with this link: bit.ly/36YmKro
___________________________________________________________________________________
WEBSITE: www.crimsonguitars.com
VINTAGE TOOL SHOP: bit.ly/3oA8uQK
DAILY GUITAR DRAW: dailyguitardraw.com/
Luthier’s Tools & Supplies: bit.ly/LuthTools
Guitar Building Courses: bit.ly/LuthierySchool
Kit Guitars: bit.ly/KitGuitars
EXTRAS channel: bit.ly/3gQmul1
SOCIAL
Instagram - / crimsonguitars
Facebook - / crimsoncustomguitars
Patreon - / crimsonguitars
OTHER
Ben's Vintage Tool Shop - vintagetoolshop.com/
___________________________________________________________________________________
Thank you again for all your support, we really, really appreciate it! - Ben
Stay tuned and stay awesome!
___________________________________________________________________________________
9 июл 2024