EP 9 - FPV FOR BEGINNERS - How To set up an FPV ANALOG Drone - Bind, Radio, Betaflight

Подписаться 309 тыс.

Просмотров 50 тыс.

50% 1

This series of videos is designed to get you into the FPV Drone Hobby by keeping things simple. In this episode I show you a Step by Step method of setting up an FPV Drone model in your radio (remote controller), and then performing a BIND, and then the final setup in BETAFLIGHT.
BETAFLIGHT. Go to this website and click on LATEST CONFIGURATOR RELEASES: betaflight.com/
The RADIO (Remote Controller) shown in this video can be found here:
• The New Jumper T18 Rad...
• EP 4 - FPV FOR BEGINNE...
SOUNDS ON MY RADIO: I installed the AMBER SOUND PACK for OPEN TX, found here: open-txu.org/home/version-2/v2...
The GEPRC MARK 4 Drone shown in this video can be found here:
• GEPRC MARK 4 - One of ...
• EP 3 - FPV FOR BEGINNE...
BELOW IS THE GEAR I USE TO CREATE MY VIDEOS:
Action Camera Hat (USA): amzn.to/2OFz5Hu
Action Camera Hat (CANADA): amzn.to/2NwT7Zh
SOFTWARE I USE TO EDIT MY VIDEOS IS ONE OF THE FOLLOWING:
iMOVIE
FINAL CUT PRO
DA VINCI RESOLVE
ACTION VLOGGING CAMERAS:
DJI OSMO ACTION: click.dji.com/AGMYePtvQpUgGrP...
GOPRO HERO 8 (USA): amzn.to/31BWboJ
GOPRO HERO 8 (CANADA): amzn.to/2MYs5WX
GOPRO HERO 7 (USA): amzn.to/2XXqeWv
GOPRO HERO 7 (CANADA): amzn.to/2Xjq6Vr
GOPRO HERO 6: amzn.to/2PA2Law
RUNCAM 5: bit.ly/2NHBPHb
MOBILE OSMO POCKET: click.dji.com/AF16aDSox3GLFnR...
ACTION CAMERA 3 AXIS GIMBAL: amzn.to/2DCrTJj
PRO CAMERAS:
Canon EOS R: amzn.to/2W0qPq9
Canon M6 MkII: amzn.to/2n0ISiO
Canon 80D: amzn.to/2Kmggb4
Panasonic 4K Camcorder: amzn.to/2JYGFdx
Lenses: amzn.to/2AWjZJ9
amzn.to/2Gwb6JT
Gorillapod 5K Tripod (AMAZON USA): amzn.to/368TFtH
Gorillapod 5K Tripod (AMAZON CANADA): amzn.to/2Tg3G39
Cool Orange Mini Tripod (AMAZON CANADA): amzn.to/2Xk5vNV
Cool Orange Mini Tripod (AMAZON USA): amzn.to/2X4JYsn
SOUND AUDIO:
MOBILE AUDIO RECORDER (USA): amzn.to/2IKMr6n
MOBILE AUDIO RECORDER (CANADA): amzn.to/2p3mExN
STUDIO BOOM MIC: amzn.to/2CgZ1ru
STUDIO VOICE OVER MIC: amzn.to/2TlTjJt
LIGHTING:
STUDIO LIGHTING: Studio Softbox: amzn.to/2GZTPX6
STUDIO LIGHTING: FalconEyes SO-40TD: amzn.to/2N9pp7J
DRONE ACCESSORIES:
Round Landing Pad: amzn.to/2HBqp2w
Square Landing Pad SMALL (USA): amzn.to/2Yl7SPf
Square Landing Pad LARGE: amzn.to/2nukqqH
#FPVforbeginners #Bind #Radio #Betaflight #FPV #Drone #CaptainDrone #Ottawa

Наука

Опубликовано:

19 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 283

@ModernDayTemplar606 3 года назад

Captain everyone that is in beginner mode should really appreciate this Video. The level of detail made thing’s so much easier to understand. Thank You for making this a real beginner series.

@CAPTAINDRONE798 3 года назад

Glad it helped

@noname-xq5ie 2 года назад

Mr sir CaptainDrone .I Finally sorted all my stuff out from this vid .I have not flown acro yet but least i can flip the switch now . this is the best vid for newbies analog by far. I wear ur t shirt with pride .Much love man

@CAPTAINDRONE798 2 года назад

Glad I could help

@andreaspap 3 года назад

If you was not you and your videos i will never go to the FPV hobby thanks so much

@CAPTAINDRONE798 3 года назад

Wow, thanks

@andreaspap 3 года назад

@@CAPTAINDRONE798 Finally i decided what buy for start follow most of your advises .fist the radio to use it into simulator the RadioMaster TX16S Hall Sensor Gimbals second for start for goggles Eachine EV800D and for drones Emax Tinyhawk, Emax Tinyhawk S II,and after a lot of crashes the Emax Tinyhawk II Freestyle of course not buy all of them all together again thanks for all the advices

@dakzer55 2 года назад

Thank you. I spent all week reading how much of a pain frsky xm+ is hard to bind. After watching your video I switched on my rekon5 , jumper t-lite to Multi, FrSky X, D16 subtype, Ch1-16, then selected bind to begin searching for the xm+. Pressed down xm+ bind button, then connected battery. Voila 1st time successfully bound. Now I need to run through setting up everything else and connecting up to betaflight to verify. Top notch guide 🙌👌. Frsky seems to be getting bad press, as most youtube videos always seem to criticise FrSky 😧.

@CAPTAINDRONE798 2 года назад

Glad it was helpful. Frsky gets bad press because the company didn’t like other companies copying their technology so what the did is they made some receivers that only work with Taranis radios causing users to get upset.

@normannylund2847 3 года назад

Wow. You are the best reviewer I have ever seen and super smart. I like watching your channel and before I go buy anything, I watch your reviews and take your advice. thank you for your time and effort.

@CAPTAINDRONE798 3 года назад

Wow, thanks!

@shsechas 3 года назад

I don't fly FPV capt, but if I ever did. This is the RU-vid Channel I'm going to. I am subscribed to many top reviewers on RC drones, but I rate you as one of the most informative and fun to watch.

@CAPTAINDRONE798 3 года назад

Thank you, I do appreciate that!

@fpvcruzer 3 года назад

I just used this video to set up my second drone - Tiny Hawk Freestyle 2 - this was so helpful! My binding process was slightly different than described but easy to figure out since I had downloaded the manual for the drone. Thanks so much for this video! My next goal is to download more sounds, words for my radio and also to set up turtle mode!

@CAPTAINDRONE798 3 года назад

Glad it helped!

@paulbharper6612 2 года назад

Well Steve you have done it again, this is one excellent video for us beginners. The way you take your time to explain every little detail it is so much easier to understand. I will admit my head was smoking at first, but that’s why we can stop back up and start the video over again rite where my head started to simmer lol. Thank you so much for all the time you spend to help people like me get started in such a great hobby. I enjoy my Mavic but this fpv is going to be a blast I can already tell. Bye for now Paul from Louisiana.

@CAPTAINDRONE798 2 года назад

Great! Glad to hear it was helpful.

@cigarnationwarriors3981 3 года назад

I’d go Analog to keep initial investment costs to a minimum. Great series. Nothing else like it. 😎👍👍

@CAPTAINDRONE798 3 года назад

Totally agree!

@stephanb9235 2 года назад

I’m just getting back into the RC 25+ years after flying planes with a simple 4ch AM radio. I recently purchased a DJI Air 2, and as you know, it pretty much flies itself so I’ve been wanting to branch out to FPV. There’s so much out there and I was totally confused. Thanks putting this series together. You’ve done a fantastic job at breakdown things down. I am now equipped with enough knowledge to go out and spend my money intelligently.

@CAPTAINDRONE798 2 года назад

Glad you found it to be of help!

@pcmattress 3 года назад

Thank you so much. That's the first guide on this subject that I've actually understood and thought, "I can do that". Everything else I've seen seems to assume you aren't completely "green" and have at least some basic knowkedge.

@anakjohororangkampung3760 Год назад

Really help me as a begginer fpv pilot. Tq captain steve

@CAPTAINDRONE798 Год назад

You're most welcome

@andydass3437 2 года назад

I’ve watched a few beginner guides and this is one of the best in terms of simplicity and clarity. I’ve been racing competitvely in 1/10 Electric Touring cars for years (Dang! 20 years now) and I find this Quad/FPV setup intimidating..can’t imagine a person whom never dwelled into any RC hobby. Thanks Cap’n you’re doing a great service to the FPV community.

@CAPTAINDRONE798 2 года назад

Glad it helped!

@Kawasaki680 Год назад

This seems a lot more straightforward and to the point than Bardwell’s set up videos. I tried following along to his and I ran into errors I didn’t know how to fix every time. Hopefully this tutorial can get me flying!

@CAPTAINDRONE798 Год назад

Thanks & happy future flying.

@Kawasaki680 Год назад

@@CAPTAINDRONE798 good news! After a many attempts with nothing but frustration coming out of it, I found your channel and now have both of my whoops flying! Thank you for these videos! So glad I found your channel

@CAPTAINDRONE798 Год назад

@@Kawasaki680 Excellent! Happy flying.

@monkeyfpv7866 3 года назад

Excellent tutorial Steve, you explain everything so clearly. I’m going to get the Jumper T18 and the Emax Hawke Pro and hopefully you will get me flying FPV as well as my camera drones. Looking forward to getting into the hobby. Keep up,the good work pal.

@CAPTAINDRONE798 3 года назад

Great to hear!

@marcoreviews 2 года назад

@@CAPTAINDRONE798 yes! Always fun! Thanks!

@WillyFPV 2 года назад

Great job explaining Steve. .i learned a lilttle more today. Thank You very much!

@WillyFPV 2 года назад

same as Flyzone Drone said below

@CAPTAINDRONE798 2 года назад

Glad to read you found it helpful

@dougcooper4917 2 года назад

Excellent Video, and Excellent Information. Thank You.

@CAPTAINDRONE798 2 года назад

Glad it was helpful!

@anthonycallan7964 3 года назад

Wonderful, absolutely spot on. I fly lots of RC but very little drone. So having just bought two cinewhoops I really needed to refresh myself on the basic set up. I have a Trashcan and a Mobula 7 that I learnt to fly on, which I haven't flown for a year. Originally I did use "Anothers' " you tube channel to set up the Trashcan/7 I wish I'd seen yours as it's so very simple plus I learnt a couple of things as well. FYI I got the HGRLC 132 as I liked your review and the Betafpv pavo 30. I couldn't get the 95x v3 as everywhere had sold out. Hopefully this one will do. Love your channel keep up the good work.

@CAPTAINDRONE798 3 года назад

Thank you!

@troyryangolf 2 года назад

This. Video. Is. Amazing. Thank you so much!

@sheapyfpv8224 3 года назад

Really informative video so clear and easy to understand thankyou so much.

@CAPTAINDRONE798 3 года назад

Glad it was helpful!

@FoxFaderWorld 3 года назад

Thanks for this. Got me flying right away the first time w/ my Mobula 7. Perfect explanation.

@CAPTAINDRONE798 3 года назад

Great to hear!

@user-rx8qq8sk9ydv1ce5ib 2 года назад

Thank you for these great set of episodes. Completed 9 and can’t wait to watch the rest of them.

@CAPTAINDRONE798 2 года назад

Glad you like them!

@Waikhom007 Год назад

Hello captain,I found this video really helpful and i am able to fly again my first fpv built by myself. I was stuck few days due to wrong chennel mix up. i watched lots of videos.Only this video worked for me.I am also able to set up arm,mode voices through your steps. sincerely james,India🙏

@CAPTAINDRONE798 Год назад

I’m glad to hear it was helpful

@Waikhom007 Год назад

@@CAPTAINDRONE798 Hello sir,is it possible to get drone battery level in my transmitter? I have tx12 and using frsky Rxsr?

@CAPTAINDRONE798 Год назад

@@Waikhom007 you’ll have to find out if your RECEIVER sends out Telemetry to your radio.

@monkeyfpv7866 3 года назад

My Jumper T18, Green Hornet and Hawk Pro have arrived now Steve so I’m on my way to setting them up once I download beta flight and purchased some batteries.

@CAPTAINDRONE798 3 года назад

I believe the HAWK pro uses an D8 receiver, so in my video I show the settings for binding as D16. Change it to D8 for the Hawk Pro.

@monkeyfpv7866 3 года назад

CAPTAIN DRONE Thanks Steve. I’ll make a mental note. Really looking forward to getting into FPV.

@FlyZoneFpv 3 года назад

This is a well made tutorial Steve. Your definitely a great teacher so detailed and on point . You make it easy for people to understand. Your the only one compared to others that actually helped me completely. 👍keep up the great work buddy . Your my very 1st channel I subscribed to. Much love Steve! 😉

@CAPTAINDRONE798 3 года назад

Thank you!

@dadabooey 2 года назад

Super helpful. Great video 👍

@bulat9636 Год назад

Thank you so much for this video. It really helped me to bind my drone. Thank you

@PedroRafael 3 года назад

Uau! I was expecting more automatic stuff, I'm not even a beginner... Thank you so much for all the details, it will help a lot when my fpv arrives and I need to set it up. I imagine after the first times it gets easier and faster, but I see there's a huge universe just behind configurations 😯 This series is a must!

@CAPTAINDRONE798 3 года назад

Glad it was helpful!

@shaunthedrone 3 года назад

Thumbs up ere' Captain, loving the series. Many thanks for sharing the info :)

@CAPTAINDRONE798 3 года назад

Glad you like them!

@jdbaumanns 3 года назад

Holy crap!! Thank you for this tutorial! I have a Crocodile baby 4 Analog. I have been driving myself nuts trying to find the bind button!!😂😂 Super huge thank you!! Major help for a newbie!!

@lawrencemartin8205 3 года назад

Captain very nice video.. I did learn some stuff things I'm looking forward to referring back to this video to further setup my radio. Small tweaks.. thank you so much for all these video and tutorials. I know many people... beginners and advanced will appreciate them. Again. Thank you Happy flying stay safe

@CAPTAINDRONE798 3 года назад

Glad it was helpful!

@mikelouis4808 3 года назад

This is one of all Steve's video that confuse the heck out of me

@rmvelecky 3 года назад

Hi Steve....I want to say “Thank You very much for the information.....stay safe my friend. 🖖 🖖 🖖 🖖

@rmvelecky 3 года назад

You did a fantastic job explaining your topic!! New to this I have watched other RU-vid videos on the same topic but still leaving me with questions. But, how you explained it, I’m sure that when I get my new radio, I will review your video and will be able to setup my drone! Thanks Steve. This was excellent!👍👍👍

@CAPTAINDRONE798 3 года назад

Awesome! Thank you!

@lynsmith1096 2 года назад

Good tutorial Steve

@marcoreviews 2 года назад

Thanks for making this video!

@CAPTAINDRONE798 2 года назад

My pleasure!

@monkeyfpv7866 3 года назад

Thanks Steve, I’ll do some research.

@brattmandragon2965 3 года назад

Yaaaaaa... finally it makes sense 🤟😎🤘 Great job 😎👍

@rickybritton7212 3 года назад

Rick Britton, Wow, that was amazing, I hope we receive another stimulus check, I now know why your mind is so sharp and amazingly smart, to remember all of fpv settings and numbers ,it really stimulates your mind, I need that so my mind might stay sharper, Thank you CAPTAIN DRONE , I can't wait until your next Review, Your Amazing Sincerely Rick from Mo and God bless you and your family

@CAPTAINDRONE798 3 года назад

Wow, thank you

@lidphi 2 года назад

Thanks so much for this i can fly my drone now!

@thedroneflights1158 3 года назад

The betaflight part is very useful and specific!

@CAPTAINDRONE798 3 года назад

Glad to hear that!

@BlackOmegaVirus Год назад

Wow - Thank you very much!

@shawnford7067 3 года назад

loved the video very informative I wondered how to set up widgets and such I am new to FPV and setting everything up has been troubling lol. I am very surprised you do not have a switch to help with the binding. Not only have I gotten into FPV I also got into 3D printing as well and I printed off a switch and wired it up and omg it has helped me out so much with binding. Awesome video though thank you I cannot wait to learn more.

@CAPTAINDRONE798 3 года назад

I could have used a switch when I first started. Now I’m so used to it that it is a quick process

@wenepzoli 3 года назад

👍26 I wish you all a nice day! It shows the essence of this topic in a very correct way! It doesn’t hurt to be aware of radio communication because this part is also very important to me! The video recording shows this nicely! You get a huge like in every picture! More successful video recordings and flying, creative work to force health for everyone!👆🌞👍🎮🥽✈️

@kumaripinky9236 3 года назад

Cool review and helpful ( Love from india 😘🇮🇳🇮🇳).

@hirenbshah 3 года назад

One of the best beginners tutorial. Greetings from your Indian subscriber.

@CAPTAINDRONE798 3 года назад

Thank you!

@dabiz1216 3 года назад

Thank you for this video. I happened to purchase a GEPRC MK4 along with a T18 and was more than lucky to find your video. Made understanding the setup easy. My T18 came with no manual and the website does not show any. I wanted the Radiomaster but the shipping date was not for almost 2 months. Thanks Again!!!

@dabiz1216 3 года назад

THought I had it set up. Controler works in Betaflight but not when disconnected. I get no motor response. I have the exact setup as you did. Any ideas?

@johns5213 2 года назад

Excellent!!

@madbren 3 года назад

Brilliant vid mate 👍👍

@Romanian_Productions 3 года назад

I am waiting for the digital! Thank you!

@lasersbee 3 года назад

Excellent Steve...

@CAPTAINDRONE798 3 года назад

Thank you!

@brucea.kenney7957 3 года назад

great video

@emptyqrider 3 года назад

Thanks a lot .. so helpful.

@leo_dron 3 года назад

good job sir

@ajitf 2 года назад

captain after clicking on amber sound pack what should I press?

@glytch5 2 года назад

So if I bought like a Eachine pre built analog, is any of this setup already? Like a wizard x drone? They come with the controller/radio with it. Does this all work similar with a flysky remote?

@gliderzzrl2406 2 года назад

If I buy a drone kit, and after a bit I upgrade the drone, how will I connect that drone to the radio?

@WildCaptures 3 года назад

Thanks for sharing this setup Betaflight and radio setup can be very frustrating 👍

@CAPTAINDRONE798 3 года назад

Thanks. I tried to keep it simple.

@noodleaddict5215 3 года назад

Please continue drone talk i really liked it

@CAPTAINDRONE798 3 года назад

It will return

@mikelouis4808 3 года назад

I agree

@noodleaddict5215 3 года назад

@@mikelouis4808 hi i have a question that i really wanted to know but no one answerd it..heres my question. Could i take my emax ezpilot to a race in expert mode?

@mikelouis4808 3 года назад

@@noodleaddict5215 uhmm im not really in the RC or camera drone hobyy(because my cheap drone broke) *But for me i think you can if you can handle it*

@mikelouis4808 3 года назад

@@CAPTAINDRONE798 Steve! Little help here

@MAX-YT-je2kg 3 года назад

can you review the snaptain sp310 mini drore on Amazon because I want to know the quality of this drone

@RizE62 3 года назад

hey there, im having some issues for some reason my thr is on channel 2 and idk how to change please help!

@billsmith8809 3 года назад

excellent job Captain Drone, enormous amount of learning in one video--outstanding thank you!!!

@CAPTAINDRONE798 3 года назад

Thank you kindly!

@dondupuis5524 2 года назад

I set up arm just like yours and play track, but I have no arm as a sound option, the only like acro, but no armed.

@antonlianpascua5099 2 года назад

can the frsky R-XSR bind with the jumper T lite ?

@james34185 3 года назад

Hi Captain Drone in EP 9 of FPV for Beginner around the 11:53 mark under the special functions for 6 and 7 what are the acronym for switch 6 and 7? I don't have those two acronyms in my list. Thanks

@krayzenvy 3 года назад

Hope your doing well, I have a question. So I'm going to bind my tx16s to a TH2. Question is can I have two remotes bound and if yes in Betaflight per your video, do I just setup another range? Like will I just have two arms, two beepers, two angles, etc,. One for each remote but just make sure one remote is off and one is active. Why two controllers? So I can use the tx16s for me and let my son use the TH2 stock around the house. Hope I explained myself correctly.

@CAPTAINDRONE798 3 года назад

When it comes to binding a radio to a receiver it is a one bind system only for the most part. I'm sure there is a hack to get around it, but I'm not familiar with it.

@mlb013 2 года назад

Hello Steve and thanks for a concise video. I was able to bind my TH2 to my Jumper t12 pro with the help of your video however there's 1 problem. The yaw and roll are reversed. I changed the channel map and saved but It didn't help. The radio shows the sticks are in the right order. Any ideas would be greatly appreciated.

@CAPTAINDRONE798 2 года назад

All of those settings are in BETAFLIGHT. Sometimes drones come with a mapping different than you are used to, so you just change in in BETAFLIGHT.

@mlb013 2 года назад

@@CAPTAINDRONE798 All is good now. I just created a new model and went through all the steps in your video and everything is working. I must have messed something up on my first try. Thanks.

@CAPTAINDRONE798 2 года назад

@@mlb013 glad to hear. Happy flying.

@rmvelecky 3 года назад

Hi Steve. Followed your section. It was really simple and great to follow your steps.....I have one question which I believe my motors will start. For the arm/disarm in Betaflight, the minimum value is 1050. But my minimum on the throttle stick is 2056. Being that high the motors won’t start. I saw that you had your below 1050. How did you set that value in your Jumper? Maybe send me a picture on where to change it would be great. I have the same Jumper like you. Thanks 🙏

@CAPTAINDRONE798 3 года назад

Those are the default values (I did not change anything). Joshua Bardwell has a video on setting your throttle stick numbers on the radio and in Betaflight.

@rmvelecky 3 года назад

Hi Steve...the info has helped a lot. Still having issues though. If you want to know let me know and I’ll tell you As always Thank You Very Much!!👍👍👍🖖 🖖 🖖

@james34185 3 года назад

Can you have digital goggles and fly with an analog transmitter? I have a Radiomaster.

@monstergamer160 3 года назад

i have a jjrc x12 aroura and i was flying it and then i put the controller down to get something and then i picked it up but i couldnt move it and then it flew off sideways into a tree i was wondering why that happend btw i found it and it still worked as usual afterwards

@TheBadliza 3 года назад

I have a question about registration for using FPV drones. Is it like camera drones where you just need to register it and you’re good. Or do you need to get a “pilot license”? And what other paper work do you need? (I know it’s different for every state)

@CAPTAINDRONE798 3 года назад

Depends on your country. In Canada it goes by weight, so PLANES, HELICOPTERS, DRONES all fall under the same rules and that is that if they are under 250 grams, you don't need to register them or new a flight certificate.

@chaser1956 3 года назад

Captain Drone.. I have just received my Mark 4 and have TX16S radio. I have bound the drone to the radio and for one thing, when it connects the radio does not say Telemetry detected, the next thing is that happens when I Arm the drone via the radio, the props will not settle down but keep running up to full throttle and even though I pull down on the throttle the motors keep running full speed. What do you think I can do to correct this. Again, I am a noob to FPV and am following your tutorials to the best of my ability. Thank you for any help or input. Cheers

@CAPTAINDRONE798 3 года назад

Everything sounds like it works perfectly. People in the FPV hobby do not arm the motors and let the drone sit there because the drone props will throttle up due to computer in the drone thinking it is flying and trying to correct itself. My guess is you have flown those beginner camera drones like DJI or lower and you have plenty of misconceptions about drones. Erase away all your thoughts because the FPV world is very different.

@Martin-pu1ti 3 года назад

Cool setup tutorial…

@CAPTAINDRONE798 3 года назад

Thank you!

@carlosfuhrer 3 года назад

Hi captain do you use Crossfire on your fpv drones? is something that you recommend in getting??

@CAPTAINDRONE798 3 года назад

I have never used it. I usually only fly about 500 meters away when flying FPV.

@influencedbycannabis2304 2 года назад

Im having trouble binding my tinyhawk rtf pilot with TBS mambo . any suggestions?

@CAPTAINDRONE798 2 года назад

TBS mambo probably doesn't work with such a drone.

@monkeyfpv7866 3 года назад

Steve,i tried to set up my Jumper t18 today to match yours and everything was going well until i got to sounds. I dont have Arm motors, Angle Mode, Horizon Mode, Snafu or the stand clear sound files. I looked to see how to download them but it looks so complicated, can you help please. Thanks.

@CAPTAINDRONE798 3 года назад

Sorry you will have to figure that out for yourself, the info I show in the videos I created is the most detailed for FPV, however, I honestly can't make or explain every step in all the FPV options/additions/functions (very time consumer). Do a RU-vid search and you'll find people who made such videos long ago (search for sounds for the Taranis QX7).

@KurlyTL 3 года назад

Hello, quick question. Im new into the FPV world. I had multiple drones in the past year but I want to step into something new. I decided that I want to go Analog. I will be purchasing the fat shark goggles, t18 radio, and i already have a go pro 8. So my question comes to the down to retriever of the drone. I will like to buy the mark 4 4s but there is two versions of Fr Flysky available? Which one should I choose? Fr Flysky XM+ or Fr Flysky R-XSR

@CAPTAINDRONE798 3 года назад

In the FPV HOBBY always get the FRSKY XM+ receiver for every drone you buy.

@KurlyTL 3 года назад

@@CAPTAINDRONE798 thank you so much!

@kenspaceman3938 3 года назад

Are the basic steps the same for a FrSky r-xsr receiver in ACCESS mode? That’s the one I have ordered. Great vids👍

@CAPTAINDRONE798 3 года назад

If the FRSKY RADIO is using OPEN TX then it is the same.

@jagercowmaster 3 года назад

Captain i need your help in special function why i cant find arm It only say acro Crowof Crowon Engoff Flapdn Flapup Fm-1 Fm-2

@hobbyparadise2405 3 года назад

I am using Radio King TX18s and facing the issue to bind with Diatone L3 drone which is using ACCST D16/ACCESS protocol. Could you please provide the instruction manual to update the ACCST D16/ACCESS protocol on TX18s and binding instruction manual. Thanks.!!!!

@KenKneknaneek 3 года назад

Thanks for the great demo of the new Jumper T18 pro. I must have read it over now about 30 times and being old and stupid, I actually connected it to my old devo receiver, but only the switches on the transmitter moved the fins on my V tail flying eagle!! lol ..now I have to try and figure out how to make the sticks on the transmitter move the aircraft instead of the switches. I must be doing something wrong. Next thing you know I will have my new transmitter flying around the room instead of the flying eagle. Somewhere I remember the transmitter program asking if it was a v tail etc, but how to get back to that part is a work in progress. I was hoping this T18 would save me having dozens of transmitters laying around. Any help you can offer, or if you ever set up a simple aircraft, with that jumper, holler loud and clear so I don't miss your tutorial. lol Happy Flying

@CAPTAINDRONE798 3 года назад

You may have used the first 4 channels as switches. The first 4 are the joysticks & that is why in this walkthrough video we leave the first 4 channels alone and then start on the 5th one which becomes Aux #1.

@KenKneknaneek 3 года назад

@@CAPTAINDRONE798 Thanks for the kind reply. Yes I see what you mean now. I actually set up 2 aircraft so far, it was tough, had to do some over again 3 or 4 times lol, but it makes you learn. One was v tail and the other regular acft with no flaps. That jumper will save me using so many transmitters, and will get easier to use as time goes on. Your example was extremely helpful and thanks again for the great demo. Happy Flying

@rmvelecky 3 года назад

Hi Steve. In this review you said that you would tell us where to get other sounds for this radio. I’m slowly figuring out this radio. What site do I go to? Thanks

@CAPTAINDRONE798 3 года назад

You can download the AMBER sound pack from here. Once you uncompress it (you'll need a utility for that), just copy all the sound files to the SOUNDS directory on your micro SD Card in your radio.

@Onyxx98 3 года назад

this really helped me out, the channels confused me before but its easy, my drone is configurated but its dark now... ffs

@CAPTAINDRONE798 3 года назад

Great! Thanks for sharing.

@Onyxx98 3 года назад

@@CAPTAINDRONE798 thanks for being an awesome youtuber and reacting to comments, that's a good thing that small communities have!

@tesimpamonami9188 3 года назад

Hi Captain Drone, I ordered my Radiomaster TX16S 2.4G 16CH at the link you provided, I also ordered the EMAX TinyHawk2 Complete Kit, My question to you, Will I need to configure the TX when he arrived to use it on the EMAX Tinyhawk2? Will I need to use the betaflight software on my PC?Thanks

@CAPTAINDRONE798 3 года назад

The answer is YES to all. Just follow the steps in episode #9 and when it comes to the BIND button on the drone... look for the word BIND on the circuit board (I believe you can press it after you plug in the battery vice before on the EMAX drones), and also select FRSKY on your radio, but select D8 instead of D16.

@tesimpamonami9188 3 года назад

@@CAPTAINDRONE798 Thank you so much, I am going to order the Velocidrone FPV Racing Simulator ttps://www.velocidrone.com/shop. Thanks

@johnnytindel6797 3 года назад

Would you say everything is going digital for the future?

@Fkt815 3 года назад

Hi Steve, I am planning to purchase TBS Tango 2 controller as my first controller and it would be so helpful if you did a tutorial like episode 9 for it. Thanks in advance 🙏

@CAPTAINDRONE798 3 года назад

I have never used such a controller. Many companies ask me to review their controllers/radios, but I'm very picky because I know my audience is international so I stick with radios that work with all types of receivers.

@rmvelecky 3 года назад

Hi Steve..well got my Jumper T18....but no manual and cant find site to download it..any idea?

@CAPTAINDRONE798 3 года назад

If you are new to RADIOS a manual wll provide you with little help, but here is the link: www.jumper-rc.com/download/t18-series/

@kevinwalker1776 3 года назад

Great information captain. Have you received the radio master T16 yet and how do you like the touchscreen

@CAPTAINDRONE798 3 года назад

I flew with it for the first time this morning. Very good radio that is perfect for the FPV hobby. I should have a review out maybe next week.

@miguelcorrea1014 4 месяца назад

okay Ive been working on this for a while, before I was able to have my drone "arm" and fly off, currently I only only get it to connect to the "beep" sound and the motor start to twitch, on beta flight thogh the motors work just fine . not sure what went wrong

@CAPTAINDRONE798 4 месяца назад

Is there a GPS on your drone? If yes, then it won’t arm until it is outside and receives the correct number of satellites

@Zionson1 2 года назад

My radio does not have 'snafu' and 'stpbck'. What do i do?

@user02052 2 года назад

Hey Steve, I was just wondering what receiver option you chose for the drone. I have a Jumper T18 pro like you, but I just want to know. THanks!

@CAPTAINDRONE798 2 года назад

Since I fly near me (not miles away), I tend to use an FRSKY XM+ (simple and inexpensive). I order it with the drone so that the company flashes it with firmware that is compatible with most radios on the market.

@user02052 2 года назад

@@CAPTAINDRONE798 I thought that the T18 pro doesn’t work with the xm+?

@CAPTAINDRONE798 2 года назад

@@user02052 If you go to a store and buy an FRSKY XM+ receiver, it won't work. If you buy one of a hundred different FPV drones from any of the big name companies (all of them that I review) and you ask for an FRSKY XM+ RECEIVER, then they will flash the receiver with the older firmware that works with all radios.

@daddyinspanish 3 года назад

hey brother! just downloaded beta flight but it doesnt detect my drone, which driver do i download if im on latest mac os and mac

@CAPTAINDRONE798 3 года назад

You'll have to watch Joshua Bardwell's videos or other videos to figure out what your issue is (the problem is your computer so it is unique to you and you have to figure it out by using the most current drivers).

@Zionson1 2 года назад

For my Rekon 5, how do I set my failsafe to return to home on my transmitter and on betaflight?

@CAPTAINDRONE798 2 года назад

Go into the MODES section of BETAFLIGHT

@Zionson1 Год назад

@@CAPTAINDRONE798 Hello again. Have you done any video about failsafe?

@CAPTAINDRONE798 Год назад

@@Zionson1 No specific video, but failsafe is mention on drone setup. Not really a topic that one could fill a video with.

@tangkimheang3820 3 года назад

Ima download this just in case

@8419teejay 3 года назад

Hey Captain, thank you so much for the great series! I've got everything up and running but when I connect to Betaflight my drone is spinning and it says AUX 12 on my receiver is going from 1700 to 1800 even though I'm not touching anything. Any thoughts? Help pls anyone!

@CAPTAINDRONE798 3 года назад

Do you connect your drone after you are in beta flight? Is the Radio on & joysticks (left - down, right center)?

@8419teejay 3 года назад

@@CAPTAINDRONE798 Turned everything back off and connected drone via usb. Then plugged in battery after turning on radio. The crazyness is gone but now it shows no AUX and no input when I move the throttle up.

@8419teejay 3 года назад

Yup radio is on, left stick down and right is center

@8419teejay 3 года назад

Ok finally got it. Had to mess around with the Mixer bc it was mistaking the yaw for the throttle or whatever that caused the spinning. Now everything is working as intended in the Mode 2, control sticks and drone wise lol.

@TheClearchoice18 3 года назад

While I really appreciate your videos I fly drones basically a Maverick many I had the Phantom 2 plus don't have that anymore but I really wanna get into flying gliders and airplanes I don't know what remote would be the best I don't wanna upgrade I just want to get one could remote I stick with it I see every day more new remote keep coming out I would like to lemon tree because eventually I would like to fly long distance like the parrot disco and I really appreciate your videos and how you break it down to see exactly how I should start to what I need what I should do thank you very much you want appreciated

@masterchief1205 3 года назад

Hi Steve. I received my Radiomaster TX16S today. I am in the process of setting it up at the moment and I am having trouble with the model images... Since most of the model images were of airplanes and the few drone ones were not the ones I was looking for (Mark 4, like you have shown in the video), I went and deleted all the model images that were initially on the SD card. Then I proceeded to add a resized image of a Mark 4 drone (I was a little too quick to delete the old images and forgot to write down the actual size, but I have found someone who said it was 192x114). I then copied the file to the SD card (Image folder), but I cannot find any image when I go back to the radio... I have tried changing file format (BMP, JPEG, PNG) changing resolution again (to a smaller 64x32 size which I have found on another website), but nothing does it... I have found a page on OpenTX's website with icons for Taranis model icons. I tried downloading one (64x32 size) and adding it to the image folder (it was a BMP file). Strangely enough, this one worked, but there weren't any Mark 4 images. But when I put the Mark 4 image (from GepRC's website), resizing it and converting it to whatever file format, it does not work... Do you have a link to a website where you got your image for your Mark 4 drone? Thank you for your help!

@CAPTAINDRONE798 3 года назад

I don't have my radios handy at the moment, but it was rather simple (you somehow have made life difficult for yourself). Plug radio into computer and select the option as an external drive. Go on the internet and find any picture you want and download it, then resize it and leave it as a JPG, then drag and drop it into the correct directory. As long as the picture is the correct size, it will display.

@masterchief1205 3 года назад

@@CAPTAINDRONE798 I do not seem to have the correct size then, as this was the first thing I tried... If anyone is able to give me the correct image size that OpenTX uses, that would be much appreciated.

@masterchief1205 3 года назад

I think I found my mistake! The filename was too long... I tried resizing the JPEG file to 192x114 pixels. I have both files on the SD card (long name and short name). I can only see the short name. Well, shame on me for putting too much info in the filename I guess ;-)

@arthurtorricer4544 2 года назад

Ok is Beta flight easier to use on Windows than Mac.. I have a 2020 MacBook pro laptop. Have to use my USB C to android cord from my Hubsan Zino 2+ controller.

@CAPTAINDRONE798 2 года назад

It is identical on both.

@arthurtorricer4544 2 года назад

@@CAPTAINDRONE798 Thank you for your video.. I had followed all your steps for setting up my TX12. But the drone I am trying to bind with XM+ receiver - lights do not flash green and red.. its just a steady Red light. (18650 1s Fly fox nano 3 drone) what's the difference in Frsky X , x2 and L.. tried D16 and D8. I know you say you can't help everyone..and its ok.. its all part of learning. Maybe I need to just purchase a Tx16s or T18 or some other controller?

@CAPTAINDRONE798 2 года назад

@@arthurtorricer4544 The answer is that you have not pushed the bind button on the receiver in and held it down as you connected the battery.

@Editer38738 2 года назад

I really like the controllers that look like the new dji fpv type style , will you please do a video on game style controllers from all fpv companies that will ( bind) to these high end fpv drones with analog googles ..I'm about to drop $1000 on my first setup but I got what I want in mind IFlight is where I wanna go . Thanks again Steve!

@LoeraJr. 2 года назад

I have accst qx7 and I can’t fly my new nazgul I got yesterday. I got it binded so the green light is solid and doesn’t flash but the flight controller just flashes still

@CAPTAINDRONE798 2 года назад

If you are new to the FPV hobby then there could be many reasons why this is. Keep in mind that those silly accst QX7 radios are very particular about the model of receiver they connect to. What receiver did you have placed in the drone?

@LoeraJr. 2 года назад

@@CAPTAINDRONE798 i have the Rxsr

@CAPTAINDRONE798 2 года назад

@@LoeraJr. You may have the wrong receiver info selected

@LoeraJr. 2 года назад

@@CAPTAINDRONE798 how I flashed it already though