Тёмный

Epoxy Serving Tray made with TotalBoat ThickSet Epoxy 

Jk Canvas
Подписаться 4,3 тыс.
Просмотров 14 тыс.
50% 1

In this video I use Total Boat Epoxy to make some amazing serving trays for two very special friends. I started with a 5"x5" walnut chunk that was procured from Caleb at YouCanMakeThisToo ru-vid.com/show-YouCa.... I milled up the lumber using my Rikon 10-324 and planed with the Ridgid R4331. Once the epoxy was set I finished with some sanding and micromesh polishing on the epoxy. Once the sanding was complete I sealed the wood using Howard Products BBC012. I placed rubber feet and antiqued bronze handles. I think they turned out quite nice.
Below are Amazon Associate links for products I used or have used.
Amazon Links
Making Time, By Bob Clagett
amzn.to/2TWG95m
Howards Products BBC012
amzn.to/2WBd9ET
Tuck Tape
amzn.to/31ZL7EV
Paste Wax
amzn.to/3ebteYx
Relitec Positioning Squares
amzn.to/30NZxG5
Feiyang Miter Springs
amzn.to/2umXm09
Bora WTX 5 Pc Clamp edge saw set
amzn.to/2VYZojb
Bora 24" Parallel Clamps
amzn.to/2JxBKDK
GoPro Hero 5 Black
amzn.to/2IuAliu
MicroJig GRR-RIPPER
amzn.to/2S1xUs4
25 ft Milwaukee Tape Measure
amzn.to/2t7Tn3I
Rigid Cordless Set
amzn.to/2Dn1i4m
Kreg Jig
amzn.to/2JHRp1y
Titebond II
amzn.to/2z0f2OP
amzn.to/2DmGNF2
Knipex Pliers
amzn.to/2Qi3gpj
Saw Blade
amzn.to/2QklLJK
EDC Pouch amzn.to/2yQOhMG
DISCLAIMER: Woodworking and the use of power and hand tools can be extremely dangerous. You are responsible for understanding the safe use of your tools and techniques. Your safety is YOUR responsibility, I accept NO responsibility or liability for any injuries, accidents, death occurring to you or others if you attempt to do the things that I do or use advice that I give.

Опубликовано:

 

17 мар 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@katerabrown4822
@katerabrown4822 3 года назад
FINALLY a video that shows the handle process lol
@JkCanvas
@JkCanvas 3 года назад
katera brown thank you for stopping by. I try to add a little something that others don’t.
@tristantimms9580
@tristantimms9580 3 года назад
Yes, really authentic.
@YouCanMakeThisToo
@YouCanMakeThisToo 4 года назад
Boards came out looking great, and love your shirt
@JkCanvas
@JkCanvas 4 года назад
YouCanMakeThisToo my buddy Caleb has an awesome channel. You need to check him out
@josephgrzelak5165
@josephgrzelak5165 Год назад
Good job
@tristantimms9580
@tristantimms9580 3 года назад
Loved it, the mistakes is what make you stand out front the rest and actually helps people like me (beginners) learn. Thanks a million, I will definitely be following your work
@JkCanvas
@JkCanvas 3 года назад
Thank you for the kind words. Glad I was able to help out a little.
@AntonioClaudioMichael
@AntonioClaudioMichael 4 года назад
Killer cool serving trays Will wow cane out amazing
@JkCanvas
@JkCanvas 4 года назад
Antonio Claudio Michael thank you for the kind words.
@wolfwoodworkingcreations4321
@wolfwoodworkingcreations4321 4 года назад
You have inspired me!
@JkCanvas
@JkCanvas 4 года назад
Wolf Woodworking Creations awesome.
@TimTurner115
@TimTurner115 4 года назад
That's cool. Beautiful job.
@JkCanvas
@JkCanvas 4 года назад
Thanks for stopping by and the kind words.
@BruceAUlrich
@BruceAUlrich 4 года назад
They turned out really nice!
@JkCanvas
@JkCanvas 4 года назад
Bruce A. Ulrich thanks Bruce.
@daddykirbs
@daddykirbs 4 года назад
Nice work! I love those trays.
@JkCanvas
@JkCanvas 4 года назад
Daddykirbs Farm - A Homesteading Story thanks Blake. Hope the family is doing well.
@DadGuide
@DadGuide 4 года назад
We made a very similar board to those recently. Very cool!
@JkCanvas
@JkCanvas 4 года назад
Cooper 6 3 thank you. I am in the process of making a coffee table.
@AntonioClaudioMichael
@AntonioClaudioMichael 4 года назад
Caleb got you addicted to total boat epoxy didn't he Will
@JkCanvas
@JkCanvas 4 года назад
Antonio Claudio Michael yes he has. Love using it.
@MakinSawdust
@MakinSawdust 4 года назад
Great job on the boards!!! I have not done my first epoxy project yet, but want to badly. I am a bit intimidated mainly because of limited budget. LOL
@traceypogson8637
@traceypogson8637 3 года назад
When you made the mold for the serving tray, what did you use to make it so the resin didn't stick? Did you just disassemble it once the resin was dry?
@JkCanvas
@JkCanvas 3 года назад
I used Tuck Tape, Amazon Link in the description, and then applied some paste wax. Depending on they type of epoxy being used. Total Boat 2:1 has about an hour working time then it takes about 24 hours to fully cure. 3:1 has a longer working time but also takes 72 hours to cure.
@Mrwolfpack85
@Mrwolfpack85 Год назад
Looks great. How thick is the board? What is a good minimum thickness where the board would be stable?
@JkCanvas
@JkCanvas Год назад
I like to use 1” to 3/4”.
@TheGrantAlexander
@TheGrantAlexander 4 года назад
Looks great Will! So what would you do differently the next time?
@JkCanvas
@JkCanvas 4 года назад
The Grant Alexander not pour the epoxy above the wood. It is easier to plane the wood down.
@TheGrantAlexander
@TheGrantAlexander 4 года назад
@@JkCanvas That makes sense!
@BeardedSeabee82
@BeardedSeabee82 4 года назад
You forgot to monetize the vid lol. Hope yall bein doin alright down there in tn! Those turned out awesome!!!
@JkCanvas
@JkCanvas 4 года назад
Just checked and it says it is on.
@YouCanMakeThisToo
@YouCanMakeThisToo 4 года назад
I had ads playing when I watched
@warrenmichel4616
@warrenmichel4616 3 года назад
Beautiful, I am new to this, what are the sizes? Is there a standard size?
@JkCanvas
@JkCanvas 3 года назад
Thank you. No there is not a standard size. I custom make them when ordered. Those are 8x15. I have made 16x22, 9x16 or what ever you have stock for.
@kandiecandelaria3134
@kandiecandelaria3134 2 года назад
Very nice, what were your finished deminsions?
@JkCanvas
@JkCanvas 2 года назад
9x12 ish
@facebookmakesmesick
@facebookmakesmesick 3 года назад
Very nice. I swear to god if I could go back to school I would learn all this shit. Ok so I can do most of what you did I have everything I need but wondering after I pour epoxy how do I get it look crystal? Sand it down to 400 or 500 and then what? I'm not sure havent messed with epoxy at all but I have purple heart and walnut wood I want to use maybe I should ahit wood first to try it out? I really got into this wood crafting and want to try everything. Thanks
@JkCanvas
@JkCanvas 3 года назад
There several factors when working with epoxy. First is having good quality epoxy. I like Total Boat because their 2:2 epoxy is “idiot proof”, yes I am in that category. A pump of the resin is 2 and a pump of the hardener is 1, so equal pumps of each and you have the right mixture. Their 3:1 is a little trickier because you have to measure out 3 parts resin to 1 part hardener, but their mixing cups make it stupid easy. I found using a digital kitchen scale just as easy. Then mix mix mix and mix even more. You cannot over mix it. Then add pigment and mix some more. My buddy Caleb at YouCanMakeThisToo has a great video on it. Once you pour the epoxy to within a 1/6 or less of the wood. This will allow you to plane down to meet the epoxy. Oh clamps. You can never have enough clamps holding the wood down. The righted it is the less weepage you get again check out Caleb’s channel. Once you have your epoxy set, planed (both sides) and sanded (120-240 for General’s and 120-400 for Mahoney’s) you have two choices micro mesh (wet sanding) sanding or what I like to use Generals Finish, salad bowl finish or Mahoney’s walnut oil to fill in the sanding marks. Both are great options. Hope this helps. I would practice on something like Walnut or local species. before going to the Purple Heart. You can make your own live edge with a flap wheel on an angle grinder.
@facebookmakesmesick
@facebookmakesmesick 3 года назад
@@JkCanvas Thanks alot gonna try soon
@JkCanvas
@JkCanvas 3 года назад
@@facebookmakesmesick you are very welcome.
@Sanjaybitu
@Sanjaybitu 4 года назад
How much it cost??
Далее
Epoxy Serving Tray
10:30
Просмотров 19 тыс.
CLANCY 🦞 Operation Squid Ink (New Animation)
00:58
Kettim gul opkegani😋
00:37
Просмотров 439 тыс.
Decorative wooden tray Resin pour DEMO
13:32
Просмотров 80 тыс.
5  EPOXY Tips I Wish I Knew As A Beginner!
20:32
Просмотров 2,9 млн
Making a Walnut and Epoxy River SERVING TRAY!
10:45
Просмотров 14 тыс.
Carpentry Skills Of Experienced Carpenters
16:49
Epoxy Cutting Board DIY
19:14
Просмотров 332 тыс.