How to thoroughly clean and unclog Epson EcoTank printer nozzles effectively and without spills and without staining the inside of the printer.
⚠️ATTENTION CAUTION READ👇
* DO NOT WET, DO NOT IMMERSE the injector head, moisture causes a short circuit in the printer electronics.
* DRY the injector head before mounting.
* USE THINNER specifically compatible for printer ink,
* Do not USE alcohol. Do not USE water, it causes serious damage.
* If after the manual cleaning it still does not print, several automatic cleanings from the printer utilities will be necessary to extract the air from the pipes and circulate the ink.
* May need to stand for 12 hours after self-cleaning for proper printing.
* If the Automatic cleaning does not correct the NO PRINT problem, a manual and deep cleaning is necessary.
* A long time without printing can clog the nozzle because the ink dries.
* May need to stand for 12 hours after self-cleaning for proper printing.
* The side cover comes out by pressing its lower part and at the same time pushing upwards.
* In this operation only the head is disassembled, the printer is not disassembled.
* Removing the head allows you to see the injection of the cleaning liquid and not stain the printer.
* It is possible to inject the liquid directly without disassembling the head, it is necessary to put a very absorbent paper underneath.
* Valid for Cleaning the print head of Epson ET2500 Printers,
ET2600, ET2650, EPSON L355, Epson L455.
_______
00:00 | introduction
00:18 | disassembly
02:20 | Cleaning
03:12 | Mounting
04:29 | end check
__________
I share my experiences, the head is a delicate component and its handling could have risks of damage to the printer. It is your responsibility.
________________
EPSON ECOTANK PRODUCTS👇
www.amazon.es/shop/javiery70/...
- CLEANING LIQUID KIT
👉 amzn.to/3C93lGE
PRINT HEAD
👉amzn.to/3zfephe
- PADS
👉amzn.to/39nfMwp
- EPSON INK 664
👉amzn.to/3aS24Cw
- EPSON ECOTANK PRINTER:
👉amzn.to/2yTNYDu
______________________
TO SUBSCRIBE
👉 / javiery70
If you liked it, please do not forget to "like", thank you.
_________________________________
DIFFICULTY: Medium
DURATION: 1 hour
________________
6 июл 2024
