Epson SureColor F170 Setup and Review: Sublimation Printer

Подписаться 369 тыс.

Просмотров 157 тыс.

50% 1

Are you looking for a sublimation printer? I have a review today of the Epson SureColor F170 that you don't want to miss! This video is sponsored by Epson, however, all projects and opinions are my own. In this video, I cover how to set up and use the Epson F170 and my thoughts on this printer. We will do several projects just so you can see how this printer works for yourself. This is a dedicated sublimation printer so you don't have to worry about your warranty and you get full Epson support. Sound good to you? Watch the video to learn more about this printer from ‪@epsonamerica‬ !
Links below may be affiliate links.
Supplies used:
Epson SureColor F170 bit.ly/3Nx58Z3 (find locations to buy here)
Epson Sublimation Paper epson.com/listing?q=%3Areleva... (find locations to buy here)
Cricut AutoPress www.thecountrychiccottage.net...
Lint Roller amzn.to/325oT3F
Heat Resistant Tape www.thecountrychiccottage.net...
Tape dispenser amzn.to/3OdjPR6
Artesprix Protective Paper www.thecountrychiccottage.net... Use code CCC10 for 10% off!
Heat Resistant Mat www.thecountrychiccottage.net... Use code CCC10 for 10% off!
Heat resistant gloves amzn.to/3bfvjm8
Nomex pad shrsl.com/3ett6
Blanks used:
Shirt www.thecountrychiccottage.net...
Mug amzn.to/3wlaVL3
Hexagon coaster www.thecountrychiccottage.net...
Book end duraluxeprint.com/products/bo...
Tumbler amzn.to/3lrgK3a
Designs used:
Maker store.heyletsmakestuff.com/pr... Use code ANGIEHOLDEN for 10% off!
Trees and sky www.creativefabrica.com/produ...
Patterned paper www.creativefabrica.com/produ...
Floral tumbler www.creativefabrica.com/produ...
Other videos you may enjoy:
Sublimation Troubleshooting • 10 Common Sublimation ...
Sublimation Start Guide • Sublimation Printing a...
Be sure to follow me on social as well!
Instagram / countrychiccottage
Facebook / countrychiccottage
Cricut Facebook group / cricutlove
TikTok / countrychiccottage
Sign up for our free sublimation class here: lingering-pine-4030.ck.page/6...
Join my sublimation Facebook group here: / sublimationmadesimple
#sublimationprinter #epsonsurecolorf170 #epsonf170 #customizewithepson
0:00 Introduction
0:31 What is a sublimation printer
1:14 Blanks needed
1:51 Heat sources
2:23 What is in the box
2:48 Paper to use
3:40 Unboxing the printer
4:18 Adding the ink
7:42 Printer setup
12:43 Drivers and software
15:03 Comparison with converted printers
16:10 Print settings
18:49 Printing from Photoshop
20:13 Printing from Word
20:55 Correct side of paper
21:13 Comparison of settings
22:31 F170 Colors
22:55 Making projects
25:07 Final projects
26:33 Printer maintenance
28:16 Troubleshooting
28:41 My review
29:27 Wrap up

Хобби

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 735

@rhondathomas6773 Месяц назад

GOOD MORNING, HELLO, I RECIEVED MY F170 YESTERDAY, MAY 31ST 2024, I LOVE IT. IT PRINTS FAST AND I DON'T HAVE TO MIRROR IT, IT DOES IT OWN ITS OWN. WOW, I MADE 2 MUGS, COLOR SO VIBRANT. MY FIRST SUBLIMATION PRINTER. I'M SO EXCITED.

@AngieHolden Месяц назад

Yay!

@BUSYTHADON 6 дней назад

How did it do with pictures of peoples faces print you can’t really tell

@msmello925 Год назад

I absolutely love your videos. You are so detail-oriented and clear about everything. Thanks to you, I just purchased an Epson F170 and am looking forward to adding to my Epson family. Thank you!

@janisswanson4605 Год назад

Thank you! I was glad I found your review as I was just looking at the F170. Your review was excellent and because of it I know it's the right machine for me.

@jlp6514 2 года назад

I so love your videos. I do not hear well and I love that you put the writing so that I know what is being said. This video was great and am glad that Epson has come out with a reasonable price sublimation printer. Thank you for reviewing this printer

@yasersmart2335 2 года назад

I like your honest review anyway, you focus on colors , program , support , practical work , nice results , actually amazing result

@Tanean_aka_Gigi 2 года назад

Angie I am over the moon I found a video from you earlier when I was looking for help with sublimation. I am brand new to cricut and sublimation. I bought this same printer and so far, even with the painful sublimation learning curve and learning the materials, I love the printer. This printer was as you said super easy to set up and I liked that I did not have to do any type of conversion to use it. I was weary about converting any printer and voiding the warranty so I waited until I found something I felt comfortable investing in for crafting. Your content is invaluable and I am now obsessed with watching your videos. Thank you so much.

@AngieHolden 2 года назад

Welcome!

@debbied887 Год назад

Love your videos! You share a lot of info and always give honest feedback. This really helped me understand what I would be getting if I purchase the printer. THANK YOU!

@dariandixon3425 Год назад

THANK YOU FOR THIS 🙌🏻🙌🏻 it took me about an hour to put this up, but without your video it would’ve been ALL. NIGHT. LONG. ❤️❤️

@user-yr3nh5vi8k Год назад

Thank you so much for this step by step process; so much better than trying to read directions. I followed all steps and no issues.

@AngieHolden Год назад

Glad it helped!

@abysss56 Год назад

Youa re the most articulate and easy to follow person fro crafting! Thank you for all your help

@AngieHolden Год назад

Wow, thank you!

@juliebadger6493 11 месяцев назад

This was a crazy good video. Really appreciate all of the little details!

@paradoxchild01 Месяц назад

Thank you for this video! I’ve been overwhelmed with choosing a sub printer. This video has helped make up my mind and will purchase one very soon.

@AngieHolden Месяц назад

Glad it was helpful!

@tashanadaley2224 Год назад

I would like to say thank you because you really helped me setup my new printer

@hwlscentedcandlesandcraftsco Год назад

Thank you for making this video. I have finally got the answer which sublimation printer I should buy.

@anamariesowell5405 2 года назад

I bought this printer and sublimated on some Dollar Tree canvas. Happy with the results♥️

@janejarvis6725 2 года назад

I just setup my f170 printer. Thank you Angie for all your help. Without you video I would have been lost especially with setting up the computer part. The playing has begun!

@HINESTROZA1 Год назад

Did your printer came with power cord?

@janejarvis6725 Год назад

@@HINESTROZA1 no it didn’t you have to use Wi-Fi It went really well thanks to watching Angie’s you tube. The computer for me is the worse part. I’m getting better.

@monicarivera4135 8 месяцев назад

I loved this video! I ordered the printed today and can't wait until it arrives. Thank you!

@AngieHolden 8 месяцев назад

Happy to help!

@veniselindo6272 2 года назад

This was my very first sublimation printer. Love it

@MariaRamirez-jq9fj 2 года назад

Hello how much is this printer ?

@lynnepalumbo4218 5 месяцев назад

Thank you so much for your indepth video. I just purchased this printer and am so excited to get started.

@AngieHolden 5 месяцев назад

Hope you enjoy it!

@IriezonaSunshine Год назад

Thank you! I just bought one today for my early birthday gift🎉 hopefully it shows up before 8/26 😊

@latoyaneal2823 Год назад

Thank you so much for this video! I’ve been having issues printing from Word. I watched your video step-by-step and and my issue was resolved! I’m so grateful because I wasted a lot of materials 😢 trying to figure it out. Thank you again!

@AngieHolden Год назад

Great to hear!

@user-rg5cs7rv3p 11 месяцев назад

Thanks a bunch. You just helped me make a decision on the type of printer I needed to start my sublimation journey.

@AngieHolden 11 месяцев назад

Glad I could help!

@mirisfern 2 года назад

Hi Angie, I love your videos. I learn a lot from them, thanks for sharing such great ideas and knowledge. 🥰

@AngieHolden 2 года назад

You are so welcome!

@creekerkat9481 Год назад

Thank you for making the set up of my printer a breeze. This video was very helpful! You are appreciated!

@AngieHolden Год назад

Glad it was helpful!

@ashlyncoyle4850 Год назад

Angie Holden I just setup my Epson F170 with this video! You rock girl! Thank you so much!

@AngieHolden Год назад

Yay! Happy to help!

@sylviathomas7482 Год назад

Great video! You helped me decide on the f170 for my first printer ❣️

@rhondathomas6773 Месяц назад

My very First Sublimation Printer. F170. I’m excited.

@Mirandathekittengaming Год назад

This video was super helpful! Will definitely be picking up an F170 very soon!

@AngieHolden Год назад

Glad you liked it!!

@randiharms3471 Год назад

Thank you times a million!!!!!!!!!!! This is the most detailed video I have ran into!!! Keep going!!! I have this printer and have been having trouble, hopefully I can apply these to my MAC. It would be nice to show on a MAC 💚💚💚💚 🎉thank you again 💚💚

@AngieHolden Год назад

Glad it helped!

@jutetwine4482 Год назад

thank you for this video, a newbie from Malaysia!

@sewingbythebay Год назад

Wonderful tutorial!! Thank you!

@andychan1087 7 месяцев назад

Great explanation with clear and concise information, thank you for the video.

@AngieHolden 7 месяцев назад

Glad it was helpful!

@brittneyjcooper4356 Год назад

Thank you for the tip about using copy paper for the test sheets.

@Bellascreations 2 года назад

I've been debating on sublimation printers and/or converting an Epson ecotank for a few days now. What a headache. You're video was quite informative and helpful. I look forward to seeing more videos with this printer. Thank you.

@AngieHolden 2 года назад

Glad it was helpful!

@binkman71 2 года назад

I got this printer several months ago, when my converted printer stopped printing. It has been great! But, I thought I'd mention/warn people. When I first got it, I did not purchase the Epson sublimation paper. I still had plenty of my previous Printer's Jack sublimation paper. That paper worked great with the converted printer, however, in this dedicated sublimation printer it had minor issues. While it was possible to make it work, the printer itself saturated the non-Epson paper. Meaning, the paper came out slightly wavy, and took forever to dry before you could actually transfer the print. Obviously you can tinker with that in the operating system's printer settings, but that's a hassle! This issue did not occur for me with the Epson branded paper, which is noticeably thicker. The Epson paper isn't the cheapest, but it is comparatively priced, so do get the Epson paper if you get this printer!

@AngieHolden 2 года назад

I totally agree with that!

@killmesoicanrespawn3775 2 года назад

Quick question, how do the end results compare wih each other since you have experience with both? Cheers for the info.

@binkman71 2 года назад

@@killmesoicanrespawn3775 I haven't done any of the same design with the new printer that I did with the previous converted printer. But I can say I am very happy with the colors I get from the dedicated printer and its associated inks! Particularly on photo panels -- in the printer setup dialog I pick that I am transferring to a hard surface, print, do the pressing, and the colors are great! Likewise I've done a few t-shirts (this is a hobby for me, not a business) and the colors have been equally nice. I would say, in a very unscientific way, the Epson sublimation inks might be more vivid after transferring than the previous inks (Printers Jack UV-resistant inks), particularly for photo transfers.

@killmesoicanrespawn3775 2 года назад

@@binkman71 Awesome, good to hear you're happy with it! Thanks alot for the info and for replying dude, much appreciated! 👊

@jessicalewis9552 Год назад

Where did you buy the printer from?

@anisha4904 6 месяцев назад

thank you so much.Loves the video. I will start setting up my printer right now.

@AngieHolden 6 месяцев назад

Have fun!

@louisemcclain6189 2 года назад

Thanks Angie for sharing and during this great video tutorial I have been thinking about getting this printer

@MegUSN52 2 года назад

You won’t regret buying this printer. I just got mine two weeks ago and I love it. From out of the box, it is so easy to get set up and to make your first print. And the ink lasts a long time. I’ve been using mine a lot and have barely made a dint in the ink. I did have to buy my Epson paper separately, but from the same dealer. But my prints have come out great.

@melnakabayashi2712 5 месяцев назад

Excellent video! I’m ordering my F170 this week!

@AngieHolden 5 месяцев назад

Good choice!

@deborahdececca605 2 года назад

Angie thank you for a great tutorial. I love the book ends .

@AngieHolden 2 года назад

Thanks so much!

@gsaarchitecturalmechanical5872 Год назад

I was browsing the internet yesterday and came across this printer , I am thinking of buying one

@ANAISJGM 2 года назад

This video came just in the right moment, I’ve been thinking about getting one 🙂

@Robinator67 2 года назад

Do it! I purchased mine 2 weeks ago. I debated for awhile, but I'm glad I did!

@baybeegirl1965 2 года назад

Great review! You make it look so easy.

@MegUSN52 2 года назад

It truly is easy set up for us non techie people! I love my Epson SC F170…will sing it’s praises, until the next best craft thing out there 😆

@AprilShowers73 2 года назад

OH SURE! I JUST replaced my old Epson I converted to another conversion. dang it! I am really glad they noticed and adapted to what us crafters were doing.

@AngieHolden 2 года назад

Definitely!

@alexcialynne Год назад

I love my Epson ET-15000 but want a sublimation printer. The reasons I would select this are: 1. Its Epson 2. Its already sublimation ready 3. ink included 4. nice price compared to buying a printer to convert. I am sold now that I have seen this video. You rock Angie! I love your reviews. Black Friday sales ... here I come!

@AngieHolden Год назад

Good luck!

@marleneandrew9013 2 года назад

I have this printer and really like it. I started using A-sub paper and found the colors equally as good as with the Epson paper and actually like it better as it is heavier.

@LimeGreenAustin 2 года назад

So pleased to read your comment. I am looking to buy the SureColor F170 as my Epson Ecotank 2720 has quit but I wanted to use the paper I have on hand.

@TheKaRilCa Год назад

Glad to hear your comments on the a-sub paper

@rhondathomas6773 Месяц назад

@@LimeGreenAustin HELLO, I HAVE THE EPSON 2720 I CONVERTED TO SUBLIMATION, I BOUGHT THE F170 RECEIVED IT YESTERDAY, I LOVE IT, I'VE DONE 2 MUGS THEY TURNED OUT GOOD VERY VIBRIANT, I LOVE THAT I DON'T HAVE TO MIRROR IT, IT DOES IT ON IT'S ON, I'M VERY HAPPY FOR THAT, MY 2720 STOPPED WORKING YESTERDAY FOR SOME APPARENT REASON. IT WOULN'T SHUT OFF, MAYBE IT'S JEALOUS I BOUGHT THE F170. HAHA, MY VERY FIRST SUBLIMATION PRINTER I BEEN WANTING FOR MONTHS.

@thecreativelady1908 2 года назад

Thank you for this great review. I had no idea Epson had a dedicated sublimation printer. 🎉

@AngieHolden 2 года назад

Glad it was helpful!

@Robinator67 2 года назад

As always, you've done a great review! I purchased my F170 about two weeks ago, and I will never go back to a converted Epson again! I have been sublimating for a long time and have converted 6 Epsons. But on this printer I have run at least 25 sheets of EasySubli through with no pinwheels, paper jams or any other problems. Totally worth it! I only wish that Epson's large format sublimation upgrade wasn't a whopping $2500! (F570) It would be nice to find some middle ground for around $1000 or so. I don't have a need (yet) to print 24" wide. Love love love my printer. The efficiency is fantastic. My ink levels have barely moved! Already paid for it with the projects I've done.

@AngieHolden 2 года назад

I totally want to try EasySubli with this printer so I am happy to hear that it worked for you! I too want the F570 to come down in price or a middle ground printer!

@faithyates7826 2 года назад

Great video!

@creativestation11 8 месяцев назад

same thanks to you i purchased my Epson printer the installation was easy thanks to you too.

@AngieHolden 8 месяцев назад

Great to hear!

@brittanyyoung7715 2 года назад

I have this printer and she’s so easy to set up and use

@AngieHolden 2 года назад

It is soooo easy!

@Dee_B23 2 года назад

Angie, thank you for bringing this to us. This may be the next Epson Printer I buy for Sublimation. I will have to get Epson Sub paper to try. As always, your videos are thorough and educational, thank you!

@AngieHolden 2 года назад

You are so welcome!

@wandalusk9432 2 года назад

I have this printer and I don't use the Epson paper because I had sub paper already. I do plan to buy some to see if there is a difference.

@IriezonaSunshine Год назад

Wanda, what were the results with the different paper?

@wandalusk9432 Год назад

@@IriezonaSunshine I love the colors. I am using text print from Conde.

@wandalusk9432 Год назад

@@IriezonaSunshine The colors pop with the other paper.

@yasersmart2335 2 года назад

Thank you so much for the video

@MegUSN52 2 года назад

I just bought the Epson SC F170 a couple of weeks ago. It was spendy, but it’s been worth it. I debated between this and the F570, but I couldn’t justify paying the price tag of the F570, especially being new to sublimation. I have a Glowforge Pro, and while it’s not a waste of money, I could have saved and went with the Basic or Plus. I’m rarely doing large projects to justify paying more for the pass through. So, I used that logic in deciding between the F170 and the F570. I did buy the Epson paper to go with it so I can’t compare it to other sublimation paper. I don’t want to do anything to void my warranty with using non Epson ink and paper. The warranty and support was one of the main reasons I went with buying an Epson F170 vice converting an Epson printer. It’s so easy to set up straight out of the box (I’m on an iMac). Just make sure you follow the instructions and download the drivers and utility. 9 times out of 10, if it’s not working it’s because you didn’t successfully download the drivers and utility. I would recommend this printer to anyone who wants a warranty/support and for anyone who isn’t really doing large projects all the time…larger than 8.5 x 14. Buy this printer first and then upgrade later on, if needed. Oh, and I forgot! You also don’t have to mirror your project in your software (I use Silhouette Studio). The printer does it automatically when it prints it out even though the preview will show it as not mirrored.

@AngieHolden 2 года назад

All great points!

@svsv9 Год назад

Thank you for sharing, I am deciding if I get this or a Sawgrass. To start I think I will be getting this Epson, may you share how much in average do you spend in OEM Epson Sublimation and paper?

@mainaknandy6636 11 месяцев назад

HI. I have recently bought this printer. the colors seems little inaccurate, I am using epson sublimation ink and epson papers. can you pls help me? I appreciate. Thanks

@Cropindimples 2 года назад

Hi Angie. Thank you for this review. I have been looking to purchase a sublimation printer but was hesitant. I think I will try this one. Especially since you can print from any program.

@AngieHolden 2 года назад

Awesome!

@denisem5437 7 месяцев назад

Awesome, amazing video. Thank you thank you

@AngieHolden 7 месяцев назад

Glad you enjoyed it!

@denisem5437 7 месяцев назад

@@AngieHolden I've already join your community. Thank you

@aliciagorden4882 9 месяцев назад

Hi Angie just got this printer. Setup is easy. My epson 2800 that was converted last weekend I had for little over a year. Don't have epson paper only Asub and it worked just fine. Print quality is great. Thank you for your video😊

@AngieHolden 9 месяцев назад

That is awesome!

@aliciagorden4882 9 месяцев назад

@@AngieHolden I also just got the xtool m1. Will you be doing videos on that as well?

@AngieHolden 9 месяцев назад

I am not sure actually! I am starting with the Glowforge Aura and making content with it then I will consider what is next!

@wandalusk9432 2 года назад

I always enjoy you videos. I have both the F170 and F570 and I love them. I am still learning how to print certain things on the F570, but it was one of the best purchases I made for my small business.

@AngieHolden 2 года назад

Awesome!!

@زانغت Год назад

hello , i have f170 and i have dithering problem with phone cases , do you have it too ?

@wandalusk9432 Год назад

@@زانغت I haven't done any phone cases yet.

@pamh6014 Год назад

can you use different brands of ink with this printer?

@heatherjones8529 2 года назад

I LOVE mine!!!

@paulsloan4725 2 года назад

Wow Angie you did again another very information packed sequence,Question from a newbee I just really got started in crafting but it apperas to me that sublimation over all is the way to go.However if I fail or what ever could I ose this printer as a everyday home or office printer.Thanks

@AngieHolden 2 года назад

The printer is for sublimation so it cannot be used as an office printer. If you were to purchase a regular EcoTank and convert it, technically it could be converted back. However, it is a big pain and a ton of work.

@jeanroyster-hills7387 Год назад

excellect video. info helped .

@shadia2000 9 месяцев назад

WOW I'm blown away to know that any application works for printing with this! I'm shopping for a sublimation printer but I didn't want to be dependent on a creative cloud subscription if it wasn't absolutely necessary.

@AngieHolden 8 месяцев назад

There are not any sublimation printers that require a subscription. Some have optional subscriptions.

@judyromano5088 Год назад

I just wanted to let you know that I finally got Easi Subli to print right on my Epson F170. I never had problems with it no drying like you did but I did have black marks across the paper. The last time I did it, it was for textile but I chose rigid and I also tried the standard, it was perfect, no marks on paper. Next I'll try it using textile and standard. I love my printer so much that I just ordered the F570 Pro.

@AngieHolden Год назад

Good to know!

@yasersmart2335 2 года назад

I remember that I asked you about this printer , and you told me I will make a video for it , I got this printer , I will do my first work tomorrow

@AngieHolden 2 года назад

I hope you love it!

@CheesyMcBeard Год назад

I like the fact the original epson sublimation ink is waaaaay cheaper than the ones like hiipoo wich seem to clog up the printer pretty fast, and having my warranty still checked!

@JeriSchultheiss 2 года назад

Loved this. Am considering this printer. I'm also interested in the font you used on the "Maker" tee shirt. Thank you!

@AngieHolden 2 года назад

I purchased that design so I am not sure on the font.

@Mad4Clay 2 года назад

Too bad I already set up my converted Epson. Would love to have one that was truly set up for Epson. Thanks for doing this Angie!

@AngieHolden 2 года назад

You are so welcome!

@grammas_gone_craftyakaleil2062 2 года назад

Great video! I have two ET printers I use for sublimation, so I’d love to see this printer compared to an ET printer that’s been converted to sublimation. Also, maybe comparison of the Epson paper vs other sublimation paper!

@AngieHolden 2 года назад

Eventually I would like to do a video comparing several different brands but I need time to actually test those things.

@judyromano2229 2 года назад

First of all. Thank you Angie. I've been hoping you'd do one on this great printer. When I decided I wanted to get into sublimation I didn't want to spend a fortune for initial cost or supplies to keep it going. Then I found this one. I loved that it came with everything at a great price and the refill cost was low and I kept my warranty. I also got Epson's paper at the same time. I've had mine since last fall. I don't print very often but haven't had any issues with my ink drying up or requiring maintenance to use it. You can actually use paper up to a little over 40 in, I can't remember the exact length. It tells you this on Epson's site but no mention of how to do it. I did watch a video on YT from the only person that I've seen sell the 8.5 on a roll. It works really great. For Christmas I made lots of glass cutting boards, I used Inkscape and put all for on one long paper, you load it from the front. It did great. I made sure I used rigid to make sure the ink came out right. I think this is key. I've been putting off trying easi subli but after this review, I'm going to try it, I already have it. This printer is great. I love your tutorials so much

@AngieHolden 2 года назад

Thanks!! I definitely want to try the roll. I didn't see it many places so I was hesitant to include it in this first video!

@judyromano2229 2 года назад

@@AngieHolden I'm surprised Epson doesn't have anything on it or what paper to use. It does show you can print the long sheets but that's it. I can give you my source. She has a video to show that all printers can print up to the 42. I ordered her paper, it came really quickly. It did a good job of printing as well. I liked that I could do multiple jobs on one long sheet which saved me time. I do a print preview to make sure it all will print the way I think. I use inkscape but I'm new to it, so I'm learning by error. Thanks again for all of your help

@AngieHolden 2 года назад

I found the roll of paper but I am confused on how it attaches to the printer! I need to just figure out best practices for myself then do a video!

@judyromano2229 2 года назад

@@AngieHolden What I did is cut the paper to the size I wanted. The longest was the 47 but I didn't try to be exact because I could just put more designs on it. Then you have to load it through the paper tray, put it in as far as it goes, then push the paper tray in and it'll find the paper. In your settings you can set it to what you want. What I did was set my settings, size, rigid, mirror, on or off plus I set the print preview, especially when doing multiple designs on one sheet. Then save it, name it. The next time you need the same settings, you can pull that up and its already set. I hope this helps. Let me know if it didn't make since.

@judyromano2229 2 года назад

@@AngieHolden try this video. This is how I learned and who I got my paper from. I forgot to include the link; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b4ykNJWuPhM.html. Please delete if not allowed.

@elbanti Год назад

Spending all the extra money to buy this one instead of a cheaper one to convert, is so worth it for all the reasons. Mine's getting delivered tomorrow, can't wait to get started!

@elbanti Год назад

It’s here! Time to set it up and make shiz happen!

@hailblue221 Год назад

We’re u buy it Is ink expensive

@elbanti Год назад

@@hailblue221 Sublimation Supplies Australia. Ink is very cheap compared to Sawgrass! And even compared to my Canon regular printer! Two sets of inks came with mine plus three packs of paper. Results have been amazing so far!

@onecraftycookie Год назад

Nice printer I can't wait to get one someday so I can start sublimation, I think its about the only craft I don't do lol.

@michbennett 2 года назад

I bought this printer back in December. It was hard to find but look for an authorized Epson printer distributor. I found one locally and it was the same price. Mine did not come with paper so I bought A-Sub and love it. My colors on everything have been great!

@AngieHolden 2 года назад

Very cool!

@lauraflinn2686 2 года назад

May I ask how much the inks are and where you can buy them?

@michbennett 2 года назад

@@lauraflinn2686 the initial inks came with the printer and I have not had to reorder yet.

@woodproshopus Год назад

Hi there! What about ink? Are you able to use Hippo or other inks with this Epson?

@carolperkey 5 месяцев назад

Can I ask where you bought your printer from? I am thinking of getting this printer after my converted printer goes out.

@doreenyk 2 года назад

I love this printer, it is awesome. The A-Sub paper works such as good.

@AngieHolden 2 года назад

I would just say that the printer is made to work with the Epson paper specifically.

@doreenyk 2 года назад

@@AngieHolden I used the Epson paper also and couldn't tell the difference, but I take your point.

@1dulceritmo 2 года назад

Epson paper is hard to find or you need to buy 4 packages to get free shipping you end up buying way more ( or at least when you are starting I got the ASub instead fast shipping from Amazon 😆

@deeddrawilson108 Год назад

@@doreenyk ok I wanted to know if you could use A-sub paper too because I brought that and didn't know I should use Epson sublimation paper ☺️ I've had mine for several months and haven't used it yet it's a little scary ☺️

@doreenyk Год назад

@@deeddrawilson108 you can use the A-sub paper, that's what I am using and have for awhile. I also realized that more ink comes when you use the A-Sub as opposed to the Epson Brand.

@1XXAylinXX 6 месяцев назад

seeing this a little before christmas now im thinking of funny shirts to make for my family tomorrow heheh

@AngieHolden 6 месяцев назад

YES!!

@bettyconley6581 2 года назад

I love your video, wish I could afford one.

@AngieHolden 2 года назад

Maybe one day!

@BeachComberNoni 2 года назад

Thanks so much for the information. Been looking for a sublimation printer at a reasonable price. I don't want to convert because I don't want to void a warranty on a brand-new machine.

@MegUSN52 2 года назад

That was my logic too! I love my Epson SC F170! I can always upgrade to the Epson F570 later on, if I should need to.

@AngieHolden 2 года назад

I think that is a great reason to buy this printer!

@erikamier2537 8 месяцев назад

Love all your help with setup! Thank you for make that easy for me! Have you tried other sublimation paper? I purchased the F170 and HTVRONT sublimation paper at the same time and now I'm a bit scared to try it. I understand I will have to purchase the epson ink, but now I'm wondering if I should send back my HTV sub paper.. Your advice is appreciated and trusted! Thank you!

@AngieHolden 8 месяцев назад

I have and I haven't seen much difference.

@alaniscrystal6773 4 месяца назад

Hi Angie, thank you for your videos they are so helpful. Can you suggest me a good software or application that I can find for sublimination designs? Thank you!

@AngieHolden 4 месяца назад

Try this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kfmzrLncghk.html

@christinadugie2997 2 дня назад

OK, I love watching your videos because you’re very informative! You’re more informative than the Epson website! My problem is I went through all the steps that you suggested and my blue is still printing purple. How can I fix it. I have tried two different programs, Pixler and cricket, and I’m still not sure what to do

@AngieHolden 14 часов назад

I would press your print to 100% white polyester fabric to see what color it presses. The colors can change once pressed.

@upcdaze 2 года назад

Thank you so much for this video! Two questions: can you use Cricut design space and how about dark projects (t-shirts). Thanks again- look forward to hearing from you! Cheryl - in Texas

@AngieHolden 2 года назад

You can use Cricut Design Space. Literally any program would work. And this is still a sublimation printer so dark projects would be handled in the same way so you would need something else to put on the shirt before you sublimate.

@maiger712 2 года назад

I have the f170 I been using it for over a yr. I have had zero issues and I know it’s warranted! The only issue I have is I don’t like the epson sub paper. I use the asub paper and it works the best

@AngieHolden 2 года назад

Interesting!

@1dulceritmo 2 года назад

Did you have any issues with the paper ? There is comment saying if not using Epson paper will have issues 😩

@maiger712 2 года назад

The issue I had with the paper is that the colors for the same design were more muted with the epson paper and I don’t like that the epson paper doesn’t have writing on the back so it’s hard to see which side to print on. One side is white and the other is a pale yellow it’s very similar, with Asub paper u know which side to use. Other then that I truly love the epson F170 I just wished I had saved enough for the bigger printer. But I make due with slicing to make bigger designs. Just the price difference between the epson and the sawgrass ink had me sold.

@Robinator67 2 года назад

@@maiger712 I couldn't agree with you more. Not only the initial price of the Sawgrass, but just having to deal with the maintenance, cost of ink and the print manager turned me off. I also do split designs when I need too, but I wish Epson would come out with a middle ground wide format printer. I'm not ready to spend $2500 for the F 570. I also don't know why Epson just doesn't make the back of the paper a different color or put a watermark on it. A-Sub is my go-to and it works fine.

@MegUSN52 2 года назад

I only use the Epson sublimation paper in mine and I’ve had zero issues (unless I’m printing on something that’s not coated for sublimation). I did buy some A-Sub paper as backup since I can’t buy the Epson sublimation paper on Amazon. But, I haven’t had to use the A-Sub yet. I love how compact this printer is (I haven’t had a need to print larger than 8.5 x 14 yet). I do agree that I had a hard time figuring out how to load the paper in the printer (which side goes up/down) and I had to research it. I was told that it’s because the Epson sublimation paper is a multi-use paper vice other sublimation papers that are just designated for sublimation only. I don’t know how accurate that is though.

@lalmandal4777 4 месяца назад

Thank you ❤❤❤ Love for India

@luannnienhuis Год назад

This was very helpful, thank you! I have the f170 and love it so far. A question, do you leave it on all the time? Seems weird to do that, but I’ve read that is recommended. (I’m just a hobbyist, and do not use it every day.) Thank you!

@AngieHolden Год назад

It is recommended for Sawgrass printers. Epson printers you can do either one. Leaving it on is easier for printing.

@sharonmcclain6317 9 месяцев назад

This was a great video! Thanks so much! Does the F170 still require a maintenance tank replacement at some point?

@AngieHolden 9 месяцев назад

I would say so but I haven't had to replace anything yet.

@yvonnetucker1416 2 года назад

thanks

@michaelabrown1022 Год назад

I'm really thinking of getting this printer, thanks for your review! Where do you recommending buying in & paper?

@AngieHolden Год назад

Right now I would just google and find a reputable source. Stock is low some places.

@marieross4082 6 месяцев назад

Just recieved one for Christmas and the set up was very easy. My question is what should I be doing if printing from Silhouette Business Edition? Should I be using the ICM color management under the 'more options tab' with this software? I haven't found any videos that clearly state what to use. Thank you so much and Happy New Year!

@AngieHolden 6 месяцев назад

I would print in the same way and choose either rigid or textile.

@robiny1823 Год назад

Thank you so much for this! I’m seriously considering getting my first sublimation printer and you’ve really helped me clarify my decision. I’m a little confused about the rigid/textile options, though. Do those refer to different paper types? (That is, is there an Epson “textile” paper for use with fabric and an Epson “rigid” paper for use with mugs?) Or does the printer use the same paper for each but print differently based on whether I chose textile or rigid? I hope that makes sense!

@AngieHolden Год назад

Paper is the same for both. The setting determines how much ink is laid down on the paper which should be different for different surfaces.

@robiny1823 Год назад

@@AngieHolden thank you!

@heathermolsbee5751 2 года назад

Great tutorial! What would be the largest shirt that you could put a sublimation on? I usually make mine 9”.

@AngieHolden 2 года назад

It prints up to 8.5 x 14 inches.

@aricshorr67 6 месяцев назад

Thank you for explaining this so well! I looked through the comments but didn't see it, how did you get the icc profiles on your computer? I'm using illustrator and am having a difficult time with getting good color.

@AngieHolden 6 месяцев назад

For the F170 once you install the printer driver they will be there.

@cynthiawilliams7879 Год назад

Loved the tutorial!! Do you know how to use the cricuit machine with this sublimation printer. That is my source for my files. Thank you

@AngieHolden Год назад

I have several videos showing the Cricut and a sublimation printer together. This printer can be used in that same way.

@smeth5867 Год назад

So does the ink on this sublimation printer gets gappy if not used often like converted sublimation printers?

@shiksa22 4 месяца назад

Angie can you tell or show me how to load 8.5x14 paper in there I have no idea. Thank u ahead of time for your help

@AngieHolden 4 месяца назад

Pretty sure the tray on this one expands. Or it may have an opening in the back for larger paper.

@ehodge54 2 года назад

Great video, Angie! Why do I need to add more ink if my ink tanks still have plenty of ink?

@AngieHolden 2 года назад

You don't have to! I was just saying it may fit in the tank so you don't have to store the bottles.

@veronicasantiago944 Год назад

Hi Angie, thank you for sharing your experience with us. I am new at sublimation and I have a question about the ink, how many prints can you make before the ink running low?

@AngieHolden Год назад

A bunch. I am not sure of the exact number but the ink lasts a really long time.

@janejarvis6725 2 года назад

I. Not sure what you mean by any program to print from. If you could explain like I have cricut design space and Inkscape. So you mean just send from those. Sorry but I’m not getting all of this. But I’m learning. Glad I got the all access from your sublimation camp. It was the best learning That I was able to under stand. The f170 was the printer I was getting so this video is so helpful. Thank you.

@AngieHolden 2 года назад

You can print from any program with this printer and choose your color options. With a converted printer, you need to use specific programs if you want to use color correction.

@mikesmith7989 Год назад

Thanks for this video. Just purchased this machine and seem to be having a few problems with color adjustment. Can ask you about setting up in photoshop. What color mode do you use? RGB or CMYK. Sometimes certain colors such as blue might print darker then I need when sublimating on acrylic. I do all my sublimating on acrylic with rigid setting, high and no color adjustment but just can't seem to zero it in. Any advice would be greatly appreciated. Thanks again

@AngieHolden Год назад

Usually designers design in RGB but you are correct that the printer prints in CMYK. So yes you could see a difference just between those two.

@Luxinda 2 года назад

I love my F170! I didn’t trust myself to do the whole conversion thing properly, so I went this route instead 😊 Epson makes it so easy! I was interested in your comment about needing Epson sub paper. I use their ink, but have been using A-Sub paper. Do you think it makes a noticeable difference to use Epson brand sub paper vs any of the other popular brands? Thanks for a great video!

@AngieHolden 2 года назад

I would just say the printer is designed to work with their paper so I feel for best results it is needed.

@Luxinda 2 года назад

@@AngieHolden thank you!! It makes perfect sense, so I’ve ordered some and will compare 😊

@111alshamsi Год назад

Have you compared? , dose the A sub paper got saturated and took long time to dry ?

@Luxinda Год назад

@@111alshamsi I have done some comparisons, yes, and the truth is, even after trying Epson paper, I keep returning to A-Sub sublimation paper - I think it gives the most vivid colors and best-looking images. But that’s just my personal opinion, obviously 😊

@111alshamsi Год назад

@@Luxinda thank you so much

@KaRaan23ro Год назад

Love your videeos. And so nicely explained. But I do have a question. I use PS so I will only comment on those settings. Since you have selected PS manages colors AND selected the printer ICC, why do you still go into Printer Settings? I belive the "PS manages colors" should override whatever you select in the Printer Settings - except of course for paper and mirroring. But color correction should be done by the ICC selected. No?

@AngieHolden Год назад

Technically it SHOULD. But I change both places.

@kathyfraser5158 2 года назад

Angie, i watched this video the day it came out. You showed how you can go thru Word and then print. Can you do pictures or just words. Someone else mentioned doing pictures but did not show how. Also, I need to watch this video again as my printer has arrived. I got Epson paper as well. Where can i get photo shop or illustration? Can i just use Cticut Design Space. I have it but have not set up my maker and Easy Maker 2 or my mug press. You did a mug in this video where can i get that beautiful design that you put on the mug with the black handle and black rim. I think and i hope I made the right decision purchasing the Epson F-150. Thanks Angie, love all you videos

@AngieHolden 2 года назад

You can do pictures or words in Word. PhotoShop is a monthly fee. You can use Design Space but there are size restrictions. I have all designs and materials linked in the description below the video. Click show more on computer. On mobile, click the arrow to expand the description or swipe up on the video depending on how you are watching.

@Cee_Cee8 Год назад

hard question I know but if nothing else was a factor which one would you recommend out of the epson f170 (f100 over here) and sawgrass sg500? i've narrowed it down to these two and their both in stock but i cant decide between them even though ive watched your videos on both.😬 love your content. im based im the uk and since I found you, I tune in to your videos and read you blogs . Amazing resourse. hope you can let me know which one you would choose if you had to choose between the two? 🙏

@AngieHolden Год назад

Try this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xLGgZjCwI5Y.html

@anamariesowell5405 2 года назад

Thank you for the great information. Which would you prefer- Sawgrass SG500 or this one?

@AngieHolden 2 года назад

I am slowly working through as many printers as I can so I can give each a really good test. I have not reviewed a Sawgrass yet!

@janleathem5251 2 года назад

@@AngieHolden Let me put my 2 cents in here. I just purchased a Sawgrass, loved it...but trouble with the magenta. Gaps in the nozzle check and print tests. Sawgrass and I couldn't resolve it so I reached out to the seller SwingDesign. They were great, replaced it...and guess what!? Same magenta issue. I am sending back this replacement tomorrow....it's been so frustrating and Sawgrass admitted they had a bad batch of ink and there are known issues online with their magenta. Caveat Emptor! So, is there one seller preferred over another on buying this Epson? Not so readily available.