SUBLIMATION | EPSON F170 Printer

Подписаться 10 тыс.

Просмотров 10 тыс.

50% 1

Y’all I am absolutely loving this Epson F170! I was so hesitant about jumping on the sublimation train but this printer has made it so incredibly easy.
The guys at Makerflo have also been super great to reach out to me and make sure that everything is good and that I am happy! I highly recommend purchasing your sublimation printer through them. I have an affiliate link if you’re interested! I also purchase a Glitter and Tumblers through them as well.
makerflocrafts.com/?sca_ref=6...
I also mentioned my Tumbler press. I really am loving it as well and I’m super pleased with it. Here’s the affiliate link I mentioned for that too.
amzn.to/47aWLMX
And then the Creative Fabrica links that I mentioned for the images here they are …
www.creativefabrica.com/produ...
www.creativefabrica.com/produ...
www.creativefabrica.com/refer...
LINKTREE.. all the fun things!
linktr.ee/KarenBaskettDIYer?u...
**Disclosure: Some of the links above are affiliate links and I may receive a small commission on sales...NO extra cost to you* Thanks for checking them out!***
‪@makerflocrafts‬

Хобби

Опубликовано:

2 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@pattibleau622 Год назад

They look amazing!!! Love the flower one. ❤️❤️❤️

@karenbaskettdiyer Год назад

Thank you!

@bridgetgell5309 Год назад

You make things so easy. Love love love them and your videos of the farm well done mate ❤

@karenbaskettdiyer Год назад

Thank you so much Bridget!

@loramillet6626 Год назад

So excited you're into sublimation now! I started a few months ago and am loving it. I especially like your torn edges! 😍 Look forward to seeing many more of your projects.

@karenbaskettdiyer Год назад

Thank you so much!

@prptink Год назад

Those are absolutely beautiful 😍 I love love sublimation. Glad you’re enjoying it 😊 stay blessed love 🥰

@karenbaskettdiyer Год назад

Thank you! Yes… it’s so fun!

@sharonm6172 Год назад

Oh my wow! You are rockin’ it!! Those are beautiful! I wish I waited to covert an Epson I bought. It’s fine but I should have waited to see what you were going to get! Now I need to get your tumbler press!!

@karenbaskettdiyer Год назад

I’m sure yours is wonderful! Yes… you sure do! I’m loving it!

@CocoGirl343 Месяц назад

Your tumblers look awesome! Thanks so much for the review!😊

@karenbaskettdiyer Месяц назад

Thanks!!

@kjoscrappinmama Год назад

Thanks for the video! My converted Epson I think might be toast as I went too long without using it. Ran a few deep cleans (which only after they were run I find out it shortens the life of your printer even more! 😮) Does this specific printer have a "purge tank" I think it's called? Where it constantly runs ink through even if you don't print for a long time? That was my issue, I should have been printing at least once a week. Hobbyist and busy planning/prepping a grad party so printing wasn't a priority! Now I have to try a manual deep clean, which I'm dreading that potential mess! Creative Fabrica and Design Bundles have some pretty amazing designs! Yours turned out amazing! No surprise there though! 😁

@karenbaskettdiyer Год назад

Oh no… that’s such a bummer! I hope you get yours up and running again. I know they aren’t cheap. I’m not sure about a purge tank. I’ll have to check. Thank you btw!

@Momsheesh 6 месяцев назад

Buying from your link!

@karenbaskettdiyer 6 месяцев назад

Thank you SO MUCH!!! I greatly appreciate that!

@debbiehattersley5155 Год назад

I’ve been looking at the same printer. What type of cup press did you get? Also, I highly recommend you get an air purifier. I also put a cheap box fan in the window where it pulls out the smell. The gases that come off the cup isn’t healthy. Can’t wait to see more cups☺️☺️

@karenbaskettdiyer Год назад

Good info Debbie. I will certainly be doing that! Thanks so much!

@trishamanning7080 Год назад

Looks beautiful and less complicated than other sublimation methods. Thanks for the video. I’d like to use your link to get one but still need some more tutorials to cover the tumbler press and whether or not it has to be finished afterwards, or is it a one and done?

@karenbaskettdiyer Год назад

It's literally one and done! LOVING it so much!!!! I'd greatly appreciate you using my link if you purchase :)

@hayley_bri Год назад

Just got the same printer for my birthday! I can’t wait to start using it. May I ask what size are you making the design?

@karenbaskettdiyer Год назад

It's so much fun and super easy to use! For 20oz skinny...9.25x8

@Princess_karen 3 месяца назад

I received my F170 about 2 weeks ago. I am so happy with the printer performance. I am also new to sublimation and really enjoy seeing how the items turn out

@karenbaskettdiyer 3 месяца назад

Great to hear!

@maharlikabebz2249 2 месяца назад

Wow thank you for this! Im a new subscriber!! If i may ask two things: 1. How were you able to work out tumbler dimensions? 2. Do they also have warranty?

@karenbaskettdiyer 2 месяца назад

Glad it was helpful! I usually open my downloads and print. I figured out that *most of the time my downloads turn out right about 9.25 x 8 for a 20oz skinny. Or upload them in to Cricut design space and size them there … remove grid background in settings.

@budgetsnchaos 8 месяцев назад

Can Hippo sublimation ink be used in the Epson F150? Love your content, very informative!

@karenbaskettdiyer 8 месяцев назад

HI! I honestly don't know the answer to that ... sorry. :/ As of now.... my plan is to replenish mine with Epson ink. I can check into it and let you know what I find out though. Thanks so much for watching and I'm glad you found it informative! :)

@user-vd6yc9ji8h 10 месяцев назад

HEY HEY!!! The only thing holding me back from getting this was the fact the dimensions didn't work for tumblers! Can you share more on how you were getting this to work?

@karenbaskettdiyer 10 месяцев назад

Sure! Hopefully I can make this make sense… lol . So basically I upload my design like say from Creative Fabrica into Cricut Designspace. I then make sure my canvas is at 100%, make sure my grid lines are removed and then I unlock and size the image to 9.25 x 8. I take a screenshot (I’m on a desktop Mac if that matters) then I open my screenshot and crop it and then hit control p to print. I have my printer set to “scale to fit” and “print entire image.” Sometimes I have to tweak it a little bit but for the most part it comes out the perfect size for a 20 ounce skinny. I hope that all makes sense and it’s helpful for you.

@jodyhawbaker521 9 месяцев назад

Could you make a video of how you do this. I seen that the Tumbler print on other videos is bigger than my Epson F170 can print. I thought the skinny tumblers were 8.6 x 9.6. The epson 170 only prints 8.5 by 11. @@karenbaskettdiyer

@shiksa22 5 месяцев назад

Great video! Have a ? What if you go on vacation for a couple of weeks and not using printer. I was told u have to use it at least once a week? What do you do??

@karenbaskettdiyer 5 месяцев назад

Thanks so much! I have never had any issues. I’ve left mine for several weeks at a time and have had great success each time I’ve printed when I returned. The only time I did encounter a problem was whenever I used DTF film and my printer. But that’s a whole nother video lol.

@changkai143 3 месяца назад

is this waterproof as well? they look stunning!♥

@karenbaskettdiyer 2 месяца назад

Yes

@soniasanjuan4442 7 месяцев назад

Hi , Ty for the video I’m looking to do sublimation and dtf would this printer work with dtf transfers and powder?

@karenbaskettdiyer 7 месяцев назад

Hi there! Yes… in fact I’ve got a couple of videos out on DTF. I’d love for you to check them out!

@simonaavalos Месяц назад

I received my F 170 .. I bought it from makerflo as well but I’m having a hard time printing from canva any tutorials I have a Lenovo windows laptop

@karenbaskettdiyer Месяц назад

Yikes, I’m sorry to say I have no experience with any of those programs

@kenm2679 3 месяца назад

What kind of maintenance do you do? In a converted Epson EcoTank printer, you are supposed to run it once a week; otherwise there may be a ink clog. Does the Epson F170 require that weekly maintenance or is it just plug and play with no weekly requirement to run it weekly?

@karenbaskettdiyer 3 месяца назад

To be honest, it has been sitting untouched for about a month now because we had a life altering event happen and our family. I need to fire it back up and see how it runs soon. This is the longest it has gone unused. Before this, it has gone unused for about two weeks at a time and works just fine. 😊

@thecraftyboston 3 месяца назад

I have a Sawgrass 800 right now and has really been a workhorse for me. Does this Epson F170 need to stay on or can you turn it off without the ink and ink lines clogging???

@karenbaskettdiyer 3 месяца назад

I don’t usually turn it off, but after about two weeks of not using it, I did notice that it took a couple of prints for the colors to get back in order. But other than that, no issues!

@thecraftyboston 3 месяца назад

@@karenbaskettdiyer Thank you.

@emuhlynn 5 месяцев назад

I have this one! Idk if this is a dumb question but can I use it with sticker paper to make stickers?

@kodegyrl 5 месяцев назад

It isn't a dumb question. You can make sticker but you have to print them out and then sublimate them on to the sticker paper. You can't print directly on to the sticker paper.

@karenbaskettdiyer 5 месяцев назад

I’ve never made stickers but I’m pretty certain you need to use a regular printer and regular ink for stickers.

@emuhlynn 5 месяцев назад

@kodegyrl that's exactly what I was thinking, thank you! :)

@heatherbassine2658 7 месяцев назад

have you had dithering issues with this printer? I can't get rid of these dots on any prints. Using Mac/Affinity and epson rigid

@karenbaskettdiyer 7 месяцев назад

I had dotted lines for a few prints but it’s gone away now. I didn’t really do anything to fix it. They weren’t bad enough to address and I wasn’t sure what to do anyways. Where did you purchase it from? If Makerflo you should reach out to them for help. They seem to be super great!

@heatherbassine2658 7 месяцев назад

@@karenbaskettdiyer Oh ok. I'm trying to resolve but can't for the life of me get rid of these dots. This lady recommended changing some settings since I'm using a mac so I'll try again today. I didn't buy from makerflo, I bought from All American Print (I emailed them recently). I might try to get a replacement. Thanks for the reply!

@GREASER1974 3 месяца назад

What size paper is one able to use

@karenbaskettdiyer 3 месяца назад

I’ve never really checked into it until you just ask. I’ve only ever printed 8 1/2 x 11 but I just found this online…. Max. Paper Size 8.5" x 47.2" Paper Sizes 3.5" x 5", 4" x 6", 5" x 7", 8" x 10", 8.5" x 11", 8.5" x 14", A4, A6, half letter, executive, user definable (3.5" - 47.2" in length)

@noraalvarez3761 Месяц назад

Hi. I’m have trouble centering my images. The image is printing to low from the top. Even if I have it centered on my computer

@karenbaskettdiyer Месяц назад

Hummm… I’m not exactly sure how to help you with that. If the whole image is printing the you could always just trim your paper. But if it’s cutting off part of your image then I’m not certain about n how to get it centered up.

@jayceportillo6247 3 дня назад

If you figure it out plz let me know, im having that same issue

@98Bronxtale 5 дней назад

So that was sublimation ink? I'm just use to seeing it say it on the bottle.

@karenbaskettdiyer 5 дней назад

Yes.. that’s the nice thing about it.. this is a true Sublimation printer. No converting required. The ink comes with the printer. 😊

@hardeepgill5936 8 месяцев назад

Hi do i need to buy epson sub paper or A sub paper. Please advise

@karenbaskettdiyer 8 месяцев назад

I’ve only ever used a HTVRont, sublimation paper, and my tumblers are turning out extremely well! In fact I just received an order today. This is exactly what I buy. amzn.to/47vGul2

@anthonyleck8824 11 месяцев назад

Does this go through a lot of ink?

@karenbaskettdiyer 11 месяцев назад

I can't completely answer that just yet. I mean I've printed around 3 full tumbler wraps and my ink levels are at about 95% still so it's hard to answer.

@crafdnonna6027 9 месяцев назад

Did you print from design space?

@karenbaskettdiyer 9 месяцев назад

I got my floral wrap from Creative Fabrica. So once I download it, I just opened it on my computer and printed it. The words “Stay Beautiful”I did print from Cricut design space.

@crafdnonna6027 9 месяцев назад

@@karenbaskettdiyer thank you.

@karenbaskettdiyer 9 месяцев назад

@crafdnonna6027 no problem!