ETS C.A.M. Pistol Mag Loader for 9mm/40 Cal

Подписаться 425 тыс.

Просмотров 156 тыс.

50% 1

The ETS C.A.M. Pistol Magazine Loader is a polymer loader designed to universal and make light work of loading a wide variety of magazines in 9mm and .40 S&W.
This unique product provides increased loading speed and efficiency, and reduces sore thumbs after a full day on the range. The C.A.M. Magazine Loader can be used in all conditions and will not become soft or brittle in heat or cold.
Learn more: www.brownellsvi...

Спорт

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 131

@maxwellthepig4419 4 года назад

Bought one. Tried it on Glock 22 15 round mag. Oiled the rail, the well and even a light coat on the mag itself. Never was able to get 10 at a time to work. Eventually tried one at a time to loosen it up. Then two at a time. Seemed better, but tying three jammed a round in the well each time. Also just doing one round when mag reached 11 rounds would also jam it in the well. Not satisfied at all. Maybe it is just me or bad luck, but your experience may be better. Thumbs down on this loader.

@davidmelton2328 3 года назад

I can NOT get the loader to work worth a hoot on my Glock23 40 cal ! I have managed to get it to load 4 shells but after that it is just jammed. I have oiled it like they suggest and tried everything, just does not work as shown. POS

@johnnuber6674 3 года назад

@@davidmelton2328 Same thing with my M&P Shield. Stick with a Maglula. One at a time, but @ least it works.

@blessedexpress4476 Год назад

We're in the same boat. Def not satisfied

@lewcox3662 Год назад

@@davidmelton23281:44 1:44

@kevinrees3811 11 месяцев назад

mine works 1 out of 10 if I am lucky@@davidmelton2328

@miket.5174 5 лет назад

Just an FYI for the viewers. There is an ETS C.A.M. loader available for .45 ACP as well. However, the trough is only long enough to pick up 8 rounds at a time. For my 10 round magazines I just turn the ammo box sideways and load 5 each time. Takes a little longer but still a lot better than loading by hand.

@ziamura8095 3 года назад

One thousands thanks for being short and informative, Mine it doesn't do it easily like yours

@NoToothTonyInterviews 3 года назад

Mine doesn’t either it’s best if I only load 5 at a time

@ziamura8095 3 года назад

@@NoToothTonyInterviews I will try 5, thanks

@NoToothTonyInterviews 3 года назад

@@ziamura8095 and make sure your mag snaps into place before you start

@HowsItHappening 2 года назад

It will get there. It's really hard to use at first but will ease up after a few uses.

@stephenlamb3929 4 года назад

Got the 556 version. Loaded about 20 mags with it . It is awesome. Much better than loading them by hand .

@brandendebuhr2997 3 года назад

is that just the standard rifle version? I can't find anything on the page that says 5.56 or .223 specifically...

@Tgray2064 4 года назад

well aint that nifty. gives me another reason to buy more ammo now :)

@robertpierce3455 2 года назад

They don't work for Springfield hellcat 9mm magazine!!!

@joeperez3520 Год назад

I purchased one and it works fine with the mags for my GLOCK 19 and CZ 75B but does not even come close to working with the mags for my SIG P320C. I even lubricated the rails thinking that was what was needed for the rounds to traverse down towards the mag, but the issue seems to be that the mags do not fit deeply enough into the loader. I don't get the same "snap" as I do when the GLOCK mags "locks" into place. The SIG mag just doesn't fit "high enough" into the loader.

@michaelheagen1244 3 года назад

I have a Browning Hi-Power, FN509 and a Sig P390. The loader somewhat works in the P390, almost none in the Browning and not at all in the FN. I contacted Fastmag and they pretty much blew me off saying the loader would have to break in. Well, it's hasn't. I have now contacted them 4 times regarding a refund on their 30 day money back guarantee and they will not respond. Do not waste your money!

@xXLoOSeNutXx 9 месяцев назад

I got one of these for Christmas and it doesn’t work well at all like in the video. I have seen multiple videos of people loading with ease, but not me. Also I must note, that it is denting the casings and the bullets are coming out of the casing. The first rounds I tried were federal aluminum 115 grain 9mm loaded into a Glock 17 round mag. The second rounds were Remington brass loaded into the same mag. Both gave me the same results. I’ve waste about $10 in ammo. I wouldn’t recommend this product.

@roykiefer7713 6 лет назад

Given the .357 Sig and the .40 S&W have cartridge cases with essentially identical headspaces, lengths, lower-body diameters, and rim designs, shouldn’t this product also work well with .357 Sig ammunition? After all, for most (all?) autoloaders chambered in these calibers, the magazines are fully interchangeable.

@Joe-uh6wm 5 лет назад

It does

@shevchenko7cfc941 3 года назад

I really can't believe how bad my luck is with loaders, this just flat out does NOT work with my HK 10 round mags and only SOMETIMES works with my sig 10 and 16 round mags, the first round gets jammed/ stuck at the bottom every time , I have the little ramps lubed up too, still doesn't help

@shevchenko7cfc941 3 года назад

@Steve Lee I'll give it a try!

@usaborn_0117 3 года назад

Brownells, Inc. I've read various reviews stating problems using this with other brand 9mm handguns than Glocks. Any knowledge of use of this loader with the Taurus G3C 9mm and the Highpoint 995 carbine(9mm)? Thanks !!!

@YT-MasterAdmin 9 месяцев назад

Mine works great with my Taurus G3 PT111

@lenmor4807 6 месяцев назад

Do they make one for a Smith & Wesson M&P M2.0 17 round mag?

@warrenwatanabe8810 10 месяцев назад

will this work with a Smith & Wesson, M & P 2.0 magazine?

@brandendebuhr2997 3 года назад

Thanks for doing it slow. I've already bought it but haven't gotten it in the mail yet. They do it so fast on the shopping cart page that it's hard to see how it works.

@mrz6462 3 месяца назад

Kicking back watching tv while loading my 30 mags for range day tomorrow. Should I take the 45 too? OK I will load another 25 mags.I buy my ammo loose in bulk 1K rd ammo boxes, its easier to use a Uplula. I go to the range to shoot, not reload.

@philwilliams8328 Год назад

Cumbersome and awkward. Thanks, but no thanks and I''ll stick with my Maglula Uplula.

@englereyes 4 месяца назад

Does this work for a rock island 1911 9mm?

@QarthCEO 6 лет назад

RU-vid's new video policy bans all videos which promote the sale of guns or gun accessories. I hope they never find this channel. And yes, I did vote for Pete Brownell!

@OveToranger 6 лет назад

Agreed. Since this is not a gun accessory (a magazine is physically away from a gun and ammo is physically away from the magazine) I guess this one should be OK, then again....it's down to interpretation because the new "rules" are looser than the waist of an elephants joggingpants... Btw, have the people suing weapons manufacturers considered suing Ford - I read about at least 3 fatal crashes with Fords in the last month...also - in 2 of them alcohol was involved...perhaps they should go for a ban on alcohol as well...you know...if it could save ONLY ONE PERSON it'd be worth it, RIGHT ? Also remember that alcohol and cars aren't protected by the Constitution so it should be a whole lot easier... Some trolls really should pop out into the sunlight...and stop stalking people from doing legal stuff...

@joeprego1954 2 года назад

Does not work with Beretta 92 mags, I did oil the ramp, but gets stuck every time. Could work better with other brands, but in my opinion for what I need it for...it's garbage.

@MarkJoseph81 Месяц назад

Am I not pressing hard enough or something? It seems like it doesn't want to load. Am I being a wuss? 😄

@urbangorilla6733 2 месяца назад

Just to let you know your product sux. I can load on round at a time. Brand new sig with a brand new loader.

@dscouple2 2 года назад

9mm doesn't work with S&W M&P mags. Tried FMJ, HP, LRN..... Not only it gets stuck, but also scratched up the rounds. Tried two of them, no go. Returned. But I did find one that works even better than the UPLULA because even with a single load, it's much faster, and it is the SpeedBeez speed loader. Due to different mag releases, they make different models, and I highly recommend one that fits your model. Here is a link to a video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Z2J8vxMy2U.html&ab_channel=MudLakeRanch

@BryanDurio Год назад

I bought an UpLula about a year ago and I love it I have sensory & dexterity issues with my left hand, so the SpeedBeez wouldn't work for me, but it does look like a neat concept.

@louieluis8840 6 месяцев назад

Is it only for glock magazine ?

@MikePoulson-qt1me 4 месяца назад

These things are junk, even with oil on them it is hard to load a magazine.

@jnwill081 6 месяцев назад

This did not work for my Canik magazines

@IMPACT213 3 года назад

Mine gets stuck sometimes 😬

@jokerandthethiefgarage8602 2 года назад

No issue with the feed lips?

@bigkev9631 9 месяцев назад

Can you use them for 10 mm ?

@skandalis100 5 месяцев назад

Mines doesn’t work

@noretreat2074 6 лет назад

does this loader ONLY work with Glock mags. or will colt 9mm fit? SHOULD HAD BEEN INCLUDED IN VIDEO.

@MegaBman25 6 лет назад

Works with almost all single and double stack 9mm or .40cal mags. you do have to lube a couple of surfaces to make it a bit easier. Used mine on the last couple of range trips and worked well. Only issue is, it made my range trip shorter because it made loading the mag so fast.

@MegaBman25 6 лет назад

Try the rifle loader for the colt SMG mags

@ericanulph1980 5 лет назад

This might work well with my Walther PPS 9 mm

@nasanction Год назад

@@MegaBman25 Just spend more time emptying the mags! ;)

@BryonLape 5 месяцев назад

This thing has been out for 6 year and they still can't get it to work?

@brianj9262 2 года назад

Anyone have any luck loading g3c mags? I crushed the cartridge trying to push it in

@dinein1970 Год назад

Maybe for Glock, but can attest that Sig P226 mags and HK P30SK mags don't work The AR version works great

@BlackoutPatriot 2 года назад

I got this for my CZ 75 magazines. Wouldn't load more than one round ..if I was lucky ...waste of money

@abern30 Год назад

Does this work with Staccato C2 magazines?

@tjteknik1 3 года назад

I use it for my CZ 75B mags. Requires a bit of lubrication to run smoothly, but is very fast once you get the hang of it.

@peterwheat7747 3 года назад

Would CZ RAMI mags fit this device? It takes .40 S&W

@Mr-6666 Месяц назад

How are your mags now?

@tjteknik1 Месяц назад

@@Mr-6666 In excellent condition. The speed loader doesn't wreck them in any way that I've seen.

@gunsmoke132 9 месяцев назад

"it loads 10 rounds, you can repeat until your mag is fully loaded" it must be nice living in free states.

@ToneD5150 2 года назад

Will this work with a Walthers P99 AS...???

@Joe_Goofball Год назад

I have one of these. It's a piece of junk. I didn't get it from Brownell's--I KNOW they would have taken care of me if I had. The manufacturer ignored me when I reached out to them. You're lucky to load ONE round at a time. I consider Black Hills Ammo to be one of the best, but only one round at a time--cartridges seem to have alignment problems in the case rim channel, and one has to remove it from the magazine and press the misaligned rounds out through the top of the loader. Get some other brand, people...

@kelleyknapp1499 2 года назад

I cannot get it to load my taurus G3 magazine.

@isaiahmorales8421 4 года назад

Would it work for a taurus g2c?

@garrettandre3300 Год назад

Does it work for a G3c?

@mdjak3686 Год назад

When I first got this I couldn't get it to work on a 17 round mag for a P365, nor my single stack 10 round Glock. After trying it for a while, it works well. Sometimes it won't load the last one or two but it's still pretty cool.

@bartanstaett6154 6 лет назад

Will this work with any other doublestack pistol magazines?

@OveToranger 6 лет назад

Some, but definitely not all...and some it only works with after a lot of fiddling...

@RockerWasRight 3 года назад

Will NOT work on P08 Luger.

@Gmar69 11 месяцев назад

Kinda weird when most magazines hold 15-17 rounds.

@IMPACT213 3 года назад

I need this

@feralpundit Год назад

Lol never had it slide that easily. Do you have a spring in that mag? Lol

@zevys Год назад

Doesn't work with the Ruger ECS9. Is there one out there for the Ruger?

@ninja63639 Год назад

will this work with a Glock 20 10mm?

@goodsir2551 2 года назад

Fyi this works perfect for the CZ TS2 9x19

@soolly357 3 года назад

Nice

@tannercormier5888 2 года назад

Will it work for FN 509 compact tactical 16-24 9mm rounds?

@tntsake3032 Год назад

Not work with all mag.

@luckylandy2945 Год назад

This thing is epic... My mind is blown... I can't wait to hit the range this weekend. Oh and for everyone who can't seem to get it, like my mom used to say, put a lil elbow grease into it and it'll work. Took me a min to get it as well. Excellent product....

@flowerfire7 3 года назад

Baikal Viking Mp446 has rifle loading system or dual bullets at top will it work on that?

@slowridescott Месяц назад

This thing is a pain in the ass to use for .45 Glock mags. It's NEVER worked like it does in the video.

@topdog8649 3 года назад

Does it work with Sig 9mm mags or just Glock?

@IMPACT213 3 года назад

9mm/40 cal...

@robertivey3268 2 года назад

I can't get it to work on my Sig 9mm mags.

@duMaurier15 Год назад

Do these work as easy on the IWI Masada Magazines?

@Miketheneck 3 месяца назад

Junk

@DewaldPierreNel 4 года назад

Will it load 9mmS

@blazeoftherazgrizsquadron9306 7 месяцев назад

Do these work on Sig mags?

@michaelpebley4049 2 года назад

Bought one ,doesn’t work

@realrapfan4555 27 дней назад

I bought this and its absolute trash for me it dont work-- i got at best 2 bullets in the mag

@teddywilliamson3547 3 года назад

Just gave me a gungasm...

@ipianoman18 2 года назад

You make it look soneasy

@ultimatelv27 4 года назад

Will it work for CZ Scorpion Evo3 S1 magazines?

@sabregunner1 4 года назад

the rifle loader loaded most smg mags as well, check thier website, should have a list of mags it can load

@Venomine95 2 года назад

Idk what it is, but this thing refuses to work with my Hellcat mags. I'm about ready to throw it in the trash.

@guyp849 2 года назад

Same here. Absolutely ZERO action with the hellcat mag. Dissapointed...

@paraiskaparaiskai4762 11 месяцев назад

Amazing.

@xCoDxKiNG1 5 лет назад

Will it work with with the Smith & Wesson M&P 2.0 compact?

@angelmartin2243 5 лет назад

Yup, It's a bit finicky because the magazine hole fits double-stack mags, so just keep your single stack mag in the center. The first couple of times you use the Camloader it won't feed smoothly, so start with only one cartridge at a time and keep adding cartridges every reload as you get experienced with the action. Definitely try to break it in at home first rather than fighting with it at the range the first time you go out.

@altonragan 3 года назад

Does it work for Ruger nine mm PT 95

@zevys 2 года назад

Not for my Ruger EC9S

@dalemorrison4597 2 года назад

Will that work on any 9 mag

@guyp849 2 года назад

No, can attest to this today with my new Hellcat... Only the standard 9mm setups. Sub or compact, no...

@itrstt66 Год назад

does it fit a sig sauer mag?

@brendanjosephramos 4 года назад

Can this work with my beretta APX mag?

@zero8xkira 3 года назад

I would also like to know

@jorgeramos1413 4 года назад

ETS Work with a 9 mm Beretta

@sabregunner1 4 года назад

yes

@ItsNickR 4 года назад

Will this work with a Walter creed 9mm mag?

@mikesimon785 3 года назад

It's a bit late, but yes. I have a Creed and Canik both 9mm, works well on both. And I have only one hand, so ppl who can't load with it, just don't know how.

@internziko 3 года назад

Will this work with a Tarus G3 9mm? (Sorry for noob question)

@dwan1990 4 года назад

es lo mejor que se ha inventado

@ronballenger3836 5 лет назад

I’ve had 2 and neither worked

@jpbernie72 5 лет назад

Ron Ballenger I’ve had mixed results. I don’t know if I broke something inside but now nothing is loading correctly. The first round always gets jammed now. It’s never worked as well as the demonstrator showed in this video.

@domenickclapso8216 4 года назад

Cmod43

@domenickclapso8216 4 года назад

Does it work with 40 cal Smith n Wesson mags

@sabregunner1 4 года назад

@@domenickclapso8216 it may. Its not a true "universal" loader. also use some gun oil or silicon spray on the rails and on the ramps inside the loader. That may help. the vids by ETS are some good info

@marvo6913 4 года назад

Will it load zastava M57A 7.62x25 single stack mags?

@merlesommers2817 5 лет назад

Not good for 45 acp, dings brass, and you can only load 8 rounds at a time. For glock 45, the last 5 rounds is very tough. If you reload, do not buy. It doesn't load lead bullets