EVA Foam Flooring, How EASY is it to do? | DIY series | Steadliest Catch Ep .32

Подписаться 4 тыс.

Просмотров 96 тыс.

50% 1

After being bombarded with questions regarding the new EVA foam floor in the Frewza F16 i decided to put a clip together to provide some insight in to the products available, planning, cutting and laying techniques.
I had already done most of the work before deciding to do this video so apologies for the lack of demonstrations but hopefully you get the idea.
Most important things is to prep the surface properly, most manufacturers will provide guidelines, but for the most part:
- Hot soapy water wash
- score surface gently with scotch pad
- sterilize area with IPA rubbing alcohol or similar product
- lay section and apply pressure for 30 seconds to activate adhesive
www.buymeacoffee.com/steadlie...
#Seadek#UDek#Ultralon#NZRubberandFoam

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@joebloggs2862 27 дней назад

Good on you for supporting the locals.

@MelloThatDude Год назад

That looks great. 👌

@Hutchy4014 Год назад

Thanks for sharing your knowledge bro. Ive been holding off installing my EVA over the last 6 months trying to find the right vid / tutorial to give me the confidence in having a crack. Really well-articulated cuz! Chur churrrr

@SteadliestCatch Год назад

Awesome! take your time, measure twice and cut once. Good luck !

@willdavis3332 Год назад

I'll be using this stuff on my boat soon. Nice video with some good tips. Thanks mate 👍

@SteadliestCatch 5 месяцев назад

Your welcome

@simonminchiny60 2 года назад

Hey man just want to say thanks for all of your reviews and thoughts on frewza boats, had been looking for ages for this kind of reviews couldn’t find anything let alone the depth you go into. I am getting a F14 beach launching dinghy I was already adding a few things to suit me half the reason I went frewza but after watching some of your content I will be emailing Frewza about the floor being flat to the pontoon. Thanks for the info and sweet fishing and hunting content

@SteadliestCatch 2 года назад

No worries mate! all there to help people in your situation as I didn’t have that resource when I was looking at them.

@moanatane1832 Год назад

Well presented tutorial bro😊. I am learning and gaining confidence in attempting to lay my floor now thanks to you. 😊👍

@SteadliestCatch Год назад

Thanks bro, good luck!

@stephenhorton4375 2 года назад

Your a legend cheers mate

@SteadliestCatch 2 года назад

No worries, hope it helped

@charlesmeihana6890 2 года назад

Churr good basic skills and a lot of common sense,,, good planning and not wasting your money 💰 It looks really good 👍,, I like it and the teak colour looks nice 😊

@SteadliestCatch 2 года назад

Cheers mate, I am really happy with how it turned out

@lukejager7755 Год назад

Thanks for your video 👍🏻

@SteadliestCatch Год назад

My pleasure

@jasoncrang2290 2 года назад

Great vid!

@SteadliestCatch 2 года назад

Did the best I could without ripping it all off and starting again for the camera 😅

@officialWWM 10 месяцев назад

Great video! Very helpful. Thanks mate. One more tip. If you don’t want the aluminium showing between the gaps, you can paint the floor first in a nice contrasting colour.

@SteadliestCatch 5 месяцев назад

I don’t recommend painting aluminium of any kind unless you want issues down the track.

@officialWWM 5 месяцев назад

@@SteadliestCatch mate, I’m a car painter by trade, if you prep it properly and use an etch primer, it will last longer than that foam floor!

@catchreload6708 2 года назад

Choice one mate, looking forward to the full review and purchase process 🤙🏽

@SteadliestCatch 2 года назад

It’s coming soon, I am putting the boat through vigorous testing before I provide you guys with an honest review.

@Full_Pack_Adventures 2 года назад

Giday mate , great video there . Enjoy watching your clips , looking forward to the boat review as I'm in the market for a new boat and I'm stick between a few . Cheers Joe

@SteadliestCatch 2 года назад

@@Full_Pack_Adventures cheers mate, waiting to do a few dive missions before I commit to doing a full review. Out of curiosity, what boats have you been looking at?

@Full_Pack_Adventures 2 года назад

@@SteadliestCatch we have just sold our Buccaneer 605 to go to an aluminum boat . Be looking at mclays , ramcos , Marco's the list goes on bud . Thought of checking out the 500xc from dna also , just so many choices

@Full_Pack_Adventures 2 года назад

@@SteadliestCatch Have touched base with guys at frewza also just to see what bang for buck is . Plenty of options alright , will hold tight till i see your thoughts on the new f16 . Cheers Joe

@jakeottati6970 Год назад

Awesome video! I was thinking about installing some instead on replacing it with carpet. I was curious though what the process would look like on a wood deck vs a metal one.

@SteadliestCatch Год назад

I would score the surface very lightly with sand paper to remove any dirt and rough up the surface to give better adhesion. Then make sure it is clean as possible before laying the product.

@davidbruzon13 2 года назад

Great job brother, what scissors are you using. Ive used a blade but love the scissor idea as it gives me more precise cutting. Also, you can use low adhesive clear contact paper for perfect stencils. 🤙🏼

@gpfishingadventures7834 2 года назад

Very tidy mate!

@SteadliestCatch 2 года назад

Cheers bro

@simonmatthews7756 7 месяцев назад

Very helpful video thanks! You mentioned you used two sheets. What were the dimensions of your sheets? Cheers

@alexh7625 2 года назад

Good work bro, man i was getting thirsty seeing that hot sun while u was doing that work. Gazebo over the boat would of cooled you off with a cold beer on the job🤙 nice job.

@SteadliestCatch 2 года назад

Cheers mate! Was pretty blaardddy hot alright. Actually haven’t had a beer for couple months mate having a wee break before summer kicks off

@alexh7625 2 года назад

Yeah i tried that myself ,didn’t work out🤦‍♂️all this lock down boredom an then the sun comes out an all we can do is go surfcasting so definitely have to enjoy a cold one while fishing off shore. Grateful we have that sort of freedom during lockdown otherwise ill go nuts. No problem with the kids having the longest school holidays this year.

@562562562562562 2 года назад

Going to look into this vs Udek. 2 sheets would cover an F18HT I'm guessing?.. A narrow paint roller could be a good optional addition to tools

@SteadliestCatch 2 года назад

Good idea with the paint roller! Hard to say as sheet sizes sometimes vary with different suppliers. I used two sheets on the F16 with pretty much nothing left over

@samhiggins1983 2 года назад

Hey bro, great vid. Did you lay this over a checker plate floor? Do you know how you'd work with that?

@SteadliestCatch 2 года назад

Nah had to request flat plate floor when building, doesn’t work on checker plate

@rangireice1059 2 года назад

Nice job, looks awesome, where did you buy it locally and roughly how much per sheet?

@SteadliestCatch 2 года назад

cheers mate, NZ rubber and foam product, around $250 per sheet from memory

@downwind73 2 года назад

Thanks for the clear video! Great. My polyester boat has some kind of structure on the surface of the floor, for grip. It’s just polyester as well. On your experience with this foam, you guess it will still stick? In your video it looks like the adhesive it pretty strong. Tnx for your reply.

@SteadliestCatch 2 года назад

I am not sure sorry, I have no experience with laying it on anything but aluminium. Best to ask the manufacturer. If you are in NZ call nz rubber and foam, they should be able to tell you

@downwind73 2 года назад

@@SteadliestCatch That’s a swift response! I’m from The Netherland, but will have a look for someone who can tell me more. Tnx. Enjoy your day.

@vincenttwisker9656 Год назад

@@downwind73Did you manage to find out if it sticks sufficiently to a polyester surface? If so could you recommend where to buy it...I am from The Netherlands as well. Cheers.

@amberbrooks2000 2 года назад

Did u get you’re boat made with plain floors .? I have been told you can’t lay it on tread plate floors , is that so ,cheers ,great vid

@SteadliestCatch 2 года назад

Yeah had it made with flat floor from factory for this purpose. Cheers

@darren4007 5 месяцев назад

Thanks for the video! Just wondering if it helps to put some silicon sealant along the edge of each floor sheet?

@SteadliestCatch 5 месяцев назад

For what purpose? With a properly prepped surface you would struggle to peel this stuff off.

@darren4007 5 месяцев назад

If it is hard to peel, does it mean it may damage fibreglass floor (if the boat is fibreglass) while the matting may need to be repaired/replaced? With the sealant it may better prevent any water go under the mat? Sorry I never do this before so just a little bit concerning.

@leviswogger5778 Год назад

What would you recommend doing to a seam on a plywood floor if installed similar to yours vs. a whole sheet ?

@SteadliestCatch Год назад

I would stay away from laying a sheet over any kind of join

@EUSTYLER 7 месяцев назад

Got my subsciption bro cheers

@markhirst3888 2 года назад

Hi mate. Nice boat! What size outboard did you go for? I am looking at a second hand 2016 F16 on Trademe. It’s got a 60hp Honda 4 stroke. In your experience of the F16, would that be too underpowered? Usually just fish 2 of us, and all fishing and no diving gear. Cheers! Mark.

@SteadliestCatch 2 года назад

Cheers mate! I went for a Honda 90hp 4 stroke. 60hp is 100% underpowered, the amount of people I see replacing the 60 down the track is proof enough. The 60hp is just a way of keeping the cost down from factory so it’s more affordable for buyers - something frewza is VERY good at! In my honest opinion I couldn’t imagine anything less than an 80hp for the F16, especially if you are adding heavy mods like bait tank, underfloor tank, thicker hull, twin batteries etc. You could JUST about get away with it if it was a no mod hull, in calm conditions and not loaded up at all, but it would still piss you off!

@markhirst3888 2 года назад

@@SteadliestCatch Haha. I thought so. I was wondering why it hadn’t sold on Trademe, given the crazy boating market currently! Tossing up between a second hand 2007 Osprey 450 with 50hp Honda 4 stroke (super stable but quite narrow) or a new Senator RC500 with Yammie F90 (new and roomier, but 2.5 times the price of the Osprey). What’s your choice between these two?

@SteadliestCatch 2 года назад

@@markhirst3888 I would go with the senator, the ospreys are great, solid boats and used a lot commercially down here in Tasman bay, but in my opinion their design is lagging behind the new generation of boats. The senator are great boats and probably the best riding pontoon boat on the market, but at 2.5times the price? 🤔 is there not any other F16’s out there?

@markhirst3888 2 года назад

@@SteadliestCatch I took the Osprey for a test drive out The Cut (I am in Nelson too) and it was very solid, but also admittedly very flat! I have had a Senator 580 hardtop about 10 years ago and they are great boats so I expect the RC500 would be too. The 2007 Osprey is only 20k and the Senator is in stock at a dealer new for 56.5k (it has extras like raised sides, bait board, guide poles, walk through transom, and a mid range Simrad sounder). A new and roomier boat than the Osprey but 36.5k more! Need something for fishing Stephen’s Island every now and then. Haven’t seen any other F16s for sale but were a couple for sale about a month ago but not with the right outboard.

@SteadliestCatch 2 года назад

@@markhirst3888 yeah the Frewza price tag a good in between - if you are patient I may be selling mine after summer 🤫 . The senator is definitely the upper end of the $$ scale.

@beardog2233 Год назад

I'm actually gonna install this stuff on top of my boats carpet. I know that sounds wacky but I'll finish the edges with stainless screws and finish washers so it'll look really nice and can't move regardless of the situation. Your thoughts???

@beardog2233 Год назад

And I'm not laying one huge panel, but many smaller ones with the carpet exposed around the edges

@SteadliestCatch Год назад

yeah i don't know about that, what is the benefit doing it that way rather than removing carpet first? but then again, I am more of a do it once, do it right kind of guy...

@beardog2233 Год назад

@@SteadliestCatch Just thought it'd be a little more cushy and still couldn't move at all. I may even do some finishing screws in the center of each panel, I'll see how it goes 🤔

@atmm89 2 года назад

do you need to sicaflex the edges, on the top surface areas, mate to prevent pealing

@SteadliestCatch 2 года назад

Nope, the adhesive is very strong providing you have prepped the surface correctly. Just keep petrol and other solvents off it as it will dissolve the afhesive

@atmm89 2 года назад

@@SteadliestCatch thanks for the advice

@steveghabrial1025 Год назад

what company do i get samples

@kinaontoast7655 2 года назад

Have you put it down on tread plate?

@SteadliestCatch 2 года назад

Nah wouldn’t recommend laying over tread plate, will create air bubbles and allow for dirt to build up and may cause corrosion issues.

@kinaontoast7655 2 года назад

Anything you recommend to put on tread plate?

@SteadliestCatch 2 года назад

@@kinaontoast7655 tube matting or we use large rubber mats from para rubber on most of the work boats.

@carpediemwithLesli Год назад

How is that as sound reduction?

@SteadliestCatch Год назад

Good at reducing deck noise, don’t think it reduces noise from the hull though

@Massiverobsfishing 2 года назад

I've used ultralon and Chinese 3m Eva foam I think ultralon even though a great product the adhesive product they use is terrible compared to 3m adhesive Eva foam.

@SteadliestCatch 2 года назад

I used Ultralon on the last boat and our current work boat with no issues whatsoever. I have had the Chinese 3m adhesive on some other products (LED strips) and it wouldn’t not hold at all

@Massiverobsfishing 2 года назад

@@SteadliestCatch yea I've had same issues with led strips but is far better on the foam products wish ultralon had the option of 3m makes a massive difference especially when applying larger pieces much more forgiving