Even long-time carpenters have learned this from me! Just a little lather will fix everything 

The tools used for fixing it do costs more than buying another new hammer..

No one in their right mind would ever trust a repaired hammer handle! Just buy a new one, job done!

Всем известно что делает кот, когда ему делать нечего.

Lousy fix! Get a new handle and do not waste time!

проще и быстрее выстругаит новую ручку для молотка )))

Great timing thank you ... i had just received a new hammer in the post to replace my old broken one ... i was able to use the packing polystyrene to fix my old hammer, threw the new one in the bin as it was no longer needed ... awesome.

need to be in love with that handle to spend time fixing it instead taking new one 😊

First, all you really need is a pole connector (a two ended threaded screw). You can also use a little epoxy to Strengthen the connection. And you have to be careful to align the opposing holes. But by the time the joint sets and is ready for use it is much simpler to put on a new handle. As most carpenters, blacksmiths, etc would do.

Надо же, как же я раньше без этого жил? Хотя в жизни не видел переломанной ручки молотка.

Из серии-стирать презервативы.

WHY DID I WATCH THIS???....😱

Кучу клея, шпилька, время проще купить новый черенок

За это время можно три новых рукоятки выстрогать

Thanks for posting this fix. However as mentioned by others I would prefer just obtaining a new handle at a local hardware store. Also this fix removes about 4-5 cm of hammering leverage. Finally breathing petrol and foam fumes does not seem very wise.

Finally ! I broke my hammer 13 years ago , but just this last month I repaired it with this video ! Only cost me 10 hours of work and 10 bucks for equipment. Lucky I didn’t waste time and money on a handle 😂😂😂😂😂😂😢

Вручную сверлить без отклонения осей надо талант иметь!😏 ...и да, скорее новую рукоятку сделать можно!😜

Дешевле , безопаснее и выгоднее купить новую рукоятку.

Поговорка "заставь дурака молиться ,он лоб расшибет" В действии....

No glue will hold up to the forces of repeated hammer strikes.

Чем бы дитя не тешилось, лишь бы не вешалось😂😂😂

Плотники такой хуйней не занимаются. Изготовить новую рукоять минутное дело. Это будет самый надёжный и безопасный вариант!

Резка ножом пенопласта - лучший АСМР.

I win! I had a bet with myself that this long-time carpenter would use a hacksaw to cut the handle parts.

It's quicker and easier to buy a new hammer.

It's a heck of a lot easier to replace the handle rather than go through all that trouble to repair the broken one.

No es mas facil cambiar el mango?

Зачем я сидел и смотрел это? Ведь ежу понятно, что ремонтировать ручку молотка - идиотская идея.

Даже заморачиваться не стану, просто приварил железную ручку и все

Crazy idea. Why not buy a new hammer, or make a new handle.

Using this idea to fix a hammer is hugely impractical however the idea itself could but used for other repairs.

За это время я сделал бы новую ручку из твердого дерева. Она бы была лучше ремонтной

That's a lot of work when you can just get a new hammer handle at your local hardware store for about $7.50.

they still sell handles for hammers if your attached to the old one

Funny... The cost - material plus efforts involved - is much more bigger than buying you a new sturdy handle..

@Inventor K, I respect your interest to post creative DIY repairs. My salute on your efforts. There is just a principle that certain items should not be repaired and re-used as they can lead to dangerous consequences for the users. Eg hammer handle, knife handle, saw handle, foot of chair etc. All these magic repairs using super glue and styrofoam or melting down plastic cable ties are great to repair broken plastic surface which pose no danger if the repair fails. All the best.

Wow!! a ballpeen hammer for nailing a board 😮

"Thank you for another amazing video! Your demonstration of repairing a broken hammer handle using foam and glue was not only fascinating but also incredibly practical. The way you explained each step made it easy for even beginners like me to understand and replicate. The key lesson I took away from this is that with a little creativity, even the toughest problems can be solved. Can't wait to try out this technique on my own woodworking projects!"

Not only has the strength of the hammer being compromised but it's also shorter just buy a new handle and be done with it ☺️

нормальную ручку поставить можно было несколько раз за это время

I'm a carpenter. In situations like this, I buy a new handle.

😱...WHY DID I WATCH THIS???

In der Zeit hätte ich schon lange einen Hammer im Baumarkt besorgt . 😉

What's wrong with just getting a new handle?

I am speechless.

My hammer has no wood handle, just steel. If it is broken, I’d buy a new one.

Amount you spent & time you spent you can buy the spare handle or very easy to make a fresh one.

Trik anda sangat luar biasa bagus kawan👍🙏🙏🙏🙏

I have several ball peen hammers of different sizes, but I don't use them for driving nails

Me buy a new hammer

i would rather replace the wooden handle than going through all the trouble

Первобытные люди с их прочными каменными молотками долго бы смеялись, увидев такие технологии.😁

Lots of wasted time for the cost of a new hammer

An elaborate procedure for emergencies. But not really economical and environmentally friendly. It would be better to get a new wooden handle.

This is way easier than driving up the street and buying a new one. Sarcasm.

проще и быстрее выстругаит новую ручку для молотка ))) it will be easier and faster to plan a new hammer handle)))

That’s a lot of extra work. Why not just buy a new hickory handle?

Sei un genio!!!!!!!!😭😭😭

Well my friend, be careful not to miss anymore hammer blows since the wood will probably crack.

I think the fix is more so a teaching of how broken wood in general can be securely bonded than it is the salvaging of a broken hammer handle.

Техника безопасности,не пустые слова

плотники со стажем.просто сделают новую ручку.это быстрей чем клеить старую))))

А плотники со стажем не страдают такой ерундой. Если ручка сломалась на молотке делают новую

Esta muy buena la Reparacion del martillo pero le falto la proteccion de la Maquina que corta fierro. Para tener mayor proteccion. Gracias esta muy bueno. Saludos desde CHILE.

I'll just buy a new hammer, thank you!😂

Ein wahrer Schaumschläger.

in germany, we call such solutions: driving the church around the village. 🤣🤣🤣 nevertheless: i enjoyed the video, and it is undoubtedly a solution. a complicated one, but it works.....

Mas fácil y mas seguro...me compro un mango nuevo 😂

Думаю, что опытные плотники покрутили бы пальцем у виска....😅😅😅

Thanks for sharing, great idea

А знакомые плотники после такого урока не засунули тебе этот молоток в одно место?

New info, thank you!

I appreciate the video and inventivnes 😂😂

А ведь он по своему молодец! Показал заведомую дурь, но заработал кучу просмотров, 😅 !

Excelente

Una muy buena alternativa para reparar la herramienta. Saludos... 👍👍

He could have made anew handle in half the time

This is the kind of repair you'd effect ìf the shops were all closed and you really needed to use that hammer.

yo soy de la REPÚBLICA de PANAMÁ GRACIAS POR TÚ VIDIO.

những mẹo rất hay, tôi rất thích xem video của kênh

It's took long time b4you fixed it and you have 2buy bolt for me just took a hardwood and make another1much easier and much stronger than the original handle

О Боже! До чего же вы европейцы тугие! 😂 Я в школе на уроке труда, 4 урока(4часа ) молоток изготавливал, в возрасте 12 лет! Слава СССР!

No es más fácil y barato ir a la ferretería y comprar un mango?

Thanks

Mas , como ideia , meus aplausos.

Да-да, ещë немного монтажной пены😂😂😂

I am assuming tools and handles are expensive or hard to find where you live. If so, good idea. I've got fiberglass or hickory replacements right down my street for a couple dollars.

Good job

Если желаешь получить молотком по лбу, сделай так же!😁

Cheaper and quicker to make a new handle. You have to be spot on to drill those holes they have to be as accurate as for dowels otherwise your handle will end up like a dog's hind leg!

2:15 Always have drills facing away from hands and other body parts.

Qué precisión 😂

Legal sua ideia

Потом бить и все время бояться что опять переломиться😅 новую надо ставить ручку. Неужели бедный такой?!

But the new handle for a couple bucks and put it on.... Quick easy and reliable...

If it takes that much effort, it would be better to just make a new sack and put it back in!

That's a mechanics hammer pal. Try a claw hammer thats what "chippies" use.

вася,проще и эфективнее сделать другую ручку...И она надёжнее будет этого "костыля" )

А другой черенок, нельзя сделать.? Наверное, гораздо быстрее и прочнее будет !

плотникам со стажем я порекомендую изготовить новую,нормальную рукоятку для молотка...тем более,что это не составляет никакой сложности..

Hahaha so this is why all the carpenters buy new handles.