Even Veteran Engineers Had To Learn This from Me! Idea of Using 1,5V Battery to Weld Aluminum Brakes 

Drill the holes using a drill press for precision. Use a hardened steel nail or brad. Assemble and bond pieces together with J-B Weld. Then throw away.

Just an absolute waste of 13 minutes and 49 seconds of your life that you'll never get back.

You just wasted your time 😂😂

I have broken motorcycle foot rest in my store. Thought about fixing it several times. Your video helped me a lot to throw it. Thank you

Truly the last Fix-It video you'll ever have to watch... 😂 13:36

To borrow the words of the famous Guy Martin "this has got hospital written all over it" . if it doesn't get you during the repair it will get you after it.

Take into account the cost of bit’s and pieces plus hourly rate a new one is cheaper and safer

There's 15 minutes I'll never get back

Goal of this video achieved. I haven't laughed so well in a long time

Just get an ac/dc tig welder, bottle of argon, helmet, gloves, a workshop.

That will work until you need to stop quickly and then you will find one piece in your hand and no brakes. Good luck with that.

I wish i had’ve found this useful video before I went on Amazon and bought a brand new pair for $18.99 delivered the following day🤔

Die Mülltonne war das beste in dem Video

An engineer would have told you that what you did was not welding but more of a back yard aluminum solder attempt. Welding involves melting rhe base metal and the fill metal so that they form a rather uniform alloy making a continous metal piece. You did not even achieve a good solder joint with your technique.

Was das für ein Video , wie Sprenge ich mich selbst weg , Kauf dir einfach ein neuen Bremshebel und du lebst länger 😂

Andy Kaufman humor where you get the laugh, but the joke is on us.

I would never run the risk of finding myself braking or shifting with a broken lever. it is a piece subjected to constant stress and for the little cost the game is not worth the candle

I thought the idea of reinforcing it by driving in screws was a great idea. Finally, filling the gaps with epoxy resin mixed with aluminum powder may have worked. I liked the honesty of the video by showing it to the end and then throwing it in the trash.

Just started watching and am wondering what's in the middle bottle. Is that urine? Is it beer? 🤣

I bet his mum wasn't happy with her dining table when she got home!

Me parece que con lo q cuesta una palanca nueva no vale la pena perder tiempo y pasando trabajo con eso,lo q más me gustó es el título del vídeo,siga con esa humildad!!!!! Jajajaja

If your life has that litttle value i guess it s an option

idée intéressante mais vouée à l'échec 1: une soudure cela se prépare avec des surfaces de contact propres, sèches, brossées afin de pouvoir se contacter avec l'apport de soudage.2:une poignée en aluminium ne sera pas soudée avec un apport de plomb ou d'étain ce n'est pas compatible et surtout la soudure alu se fait sous vide d'argon.3: le report que vous avez fait avec le scotch est bien pour la première partie mais vous avez pour la seconde juste copié et décalé le scotch sur la partie de droite or il fallait retourner le scotch pour qu'il corresponde au profil opposé.4: il suffisait de percer comme fait sur les 2 morceaux et fileter chaque élément en insérant une tige filetée de vis et serrer l'ensemble avec de la résine époxy qu'il suffisait de poncer ensuite pour obtenir un bon résultat.5 Pour bien souder il est utile de bien chauffer les 2 parties à souder si vous voulez que l'apport tienne. Si vous ne chauffez que l'apport aucune soudure de se fera et l'apport fondra et tombera au sol. Sinon un bon point pour le montage du chalumeau.

What in the 7 eleven is goin' on here? 😆

To make your weld with heterogeneous filler metal, you must first heat your support that you want to weld, so that it melts the filler metal, if it is compatible!? of which you will make sure beforehand that the latter has a lower melt degree index than what you want to weld. Otherwise congratulation for the creation and assembly of your blowtorch and the manufacture of the aluminum wrist brace, beautiful engineering.

Da ich schon länger keinen guten Witz gehört hatte, konnte ich mich reichlich über dieses Video amüsieren 🤣

I felt, I felt that something would go wrong. So much innovation and a spectacular ending😅😅😅😅😂😂😂😂

You know what. All you people keep complaining about this video but i don't see any of you having the mental capacity to even fathom this idea or even trying to bring something back to life. Including your manners... he did a great job and made some great all viewer friendly content. Thank you for your video and I'm sorry these people are so entitled to their not existent imagination.

Great video bro, you put a big smile in my face ... Thanks for sharing

the duct tape method as you did it does not take into account the fact that the image is mirrored but not superimposable

I think that most of de comments are from people that didn’t see the end of the video 😊

You taught me one thing. How too waste time 😂😂😂

爛掉了啦，太久又沒效率還麻煩死，直接焊一焊就好了

Das ist keinesfalls Schweißen mit einer 1,5V Batterie, sondern lediglich ein dilettantischer Murks.

Next Up: Engineers show me how to dislodge my head from a tailpipe after my brake lever failed.

If it broke once, it will break again. But a new One.

لو سمحت مكنه البسكويت اتكسرت من المسمأر الربطمن عند الطبليه

yep, it would been better to make a cast and melt aluminium to make a new one.

Nagyon kemény videó. De tanulságos hogy a sok kínlódás és idő fecserles mely a takolashoz vezet a vége mindig a kukában landol😂😂😂😂

L'archétype du mauvais bricoleur. Toutes les étapes sont soigneusement foirées. Ça tient du génie !

Mdr, so modest, that he will build us the future rocket by going to Mars

The comment section is the best part !

Idea for video creator: Instead, take the output fuel line and place in left nostril. Pinch right nostril shut. Close mouth to prevent escaping gas. Turn on motor for approx 25-30 seconds. Have lighter ready. Open mouth slightly and ignite lighter near mouth. Hopefully this method will prevent the posting of stupid ass posts.

I love the end, it kept me hooked trying to figure out what was the point in this DIY.

Ese tornillo aujerea mejor que una broca mecha donde lo compraste?

Don't get pulled over with this stuff in your car.

To much trouble. Just find someone with a welder and geter done. Interesting though.

I was gonna call you a idiot but since you threw it in a garbage I think you're smart.

If you got that right, I'd be blown away. Good effort. 😅

Aluminium oxidiert unter Hitze zu Asche, man muss es mit Schutzgas schweissen. Darum ist das "Schweissmaterial" auch verbrannt. Einmal googlen hätte gereicht.

Come buttare un sacco di tempo e rischiare di incendiare casa. Proprio da ingeniere

had naar school gegaan dat had gescheeld!!!

هل السائل نفط او بانزين وماهو المحرك الدافع للهواء حقآ فكرة اعجبتني ❤

wtf this was nice 😂😂😂

Interesting idea! But skip all the torch stuff and bottles and hot melt, and just use JB weld and sand it. Probably stronger and way quicker. Still might be better to buy new one!

Ein erfahrener Ingenieur hat gerade von dir gelernt, wie man seine Zeit verschwendet...

Saludos desde Barinas Venezuela gracias por compartir tus enseñanzas

After seeing what a bad idea this was, why did you post this long video? Glad I scrolled through it in 60 seconds 😂

😂😂😂man don't waste my time again 🤣🤣🤣🤣

I would sooner use chewing gum than that method 😂😂😂😂😂

As an 'engineer' I can confirm this is codswallop. Getting folks to watch to make some shekels off youtube

जहां यह नया नहीं मिलता है ऐसा कोई गांव हो या जंगल हो उसमें यह मेहनत करना जरूरी है....

Ich kann vor lachen nicht !

Hola, soy el señor ingeniero veterano , he aprendido mucho … Gracias por todo Me vuelvo a mis asuntos de ingeniero veterano 😅

Eso lo hice hace años y mi moto no pasó la ITV, me dijeron que pusiera una nueva

Fastest fast forward ever attempted by me.

would you risk you life with a cheap repair or replace it

Funny april fools video. Comment section is even funnier, you can tell who did not really watch

quicker to go to a shop on line with the part number = New replacement... next go see your general practitioner = doctor and and ask for a mild chill out prescription as all the signs of genius bodger have are returning

This is by far the best channel how not to do follow any advice. Trigger alarm 🚨: South Park >> Washington Redskins 🤣🤣

I drill a hole and use a roll pin with JB weld.

And the purpose of this was?!😅

Mil gracias Dios te bendiga🎉❤❤❤

Brazing, not welding. Though honestly this hardly even qualifies as soldering.

I enjoyed this video.. I'll be waiting for next video .. i,e. Fixing a Broken heart.. 😢😢

I welding lang pala, Ang tanong ko anong related doon sa nilalagyan mo nang marker at nilagay mo Ang plastic cellophane pagka tapos tinanggal mo, anong naitulong doon sa marker mo???? Parang Wala yata sa tingin ko!!! Tapos sa huli welding lang pala.

I'll never get back that time

Je ne suis pas étonné que les ingénieurs n'est pas investi leur temps qui coûte extrêmement cher ni investi dans les ressources nécessaires pour réparer une pièce qui a si peu de valeur

Hattest du keinen richtigen Bohrer, und zeigst dann so einen wackeligen Murks mit einer Schraube, die beim Bohren hin und her taumelt? siehe ab 2:32

Bello davvero.avete un' amico in più in Italy,Gianni.😊😊😊❤❤❤

Gave me a good laugh haha

That was a long road that leads to the Dustbin !

Jajaja excelente video..... Y lo seguí hasta el final jajaja. 😅😅😅😅😅😅

That was priceless.

You can't solder aluminium. Only Weld with a suitable device. Mounting the wire end in both parts is a nice idea in itself. Only then you would have to glue it with a vulcanising sealant or 2-component glue.

Düşündüm ki,yeni nə isə öyrənərəm.Boş yerə vaxtımı sərf elədim.

तुम्हारे लिए अच्छा बिजनेस है वेरी गुड

What liquids did you use for that torch?

Waist time watching. This is a well known knowledge about broken aluminium, even the kids know it!

Fantastic that’s exactly how I would do it

da stellt sich die frage was kostet der aufwand den zu hebel reparieren und was kostet ein neuer hebel und außerdem schweißt er das nicht mit einer 1,5 volt batterie sondern mit gas

A couple of lolly pop sticks and sellotape would have been betterer😏

Next time try fixing broken parts with a piece of chewed bubblegum. You’ll spend much less time, energy and resources and you’ll wind up with the same results as this. But for the sake of safety… don’t try to walk while you’re chewing the gum.

Were there no soda cans available?

Ficou bacana mandou muito bem

What are the two liquids in the two bottles?

Just buy a new one. Many motorcycle owners change those to aftermarket parts and leave the original parts for stock. It can be bought at a cheap price less than the amount and time you spent for the diy torch.🤣🤣🤣

انو خيي قديش حقا المسكة رح تعمل معمل كرمالا ما بتستاهل هلقد

حد يحجز لة عند دكتور لحسن الحالة تزيد

Schade um diese Zeit und Arbeit. Das dümmste was ich gesehen habe nach max.2 min.kann man abschalten.😅😅😂😂 weil nur scheiß raus kommt.