EVER FOUND A RAT LIVING IN AN EXHAUST FAN ? 

#DadJoke 😂😂😂

"sigh" *thumbs up*

🥁 _ba-dum-tiss_

Boom! 🖐️ 🎤 Take the rest of the week off.

angryupvote

Lots of people in the USA would rather use the shitiest things possible and then pray to their non existent sky daddy. Ofc when the thing failed is always the fault of the one doing a poor job at praying !

that's the old souls of America for you. until they all die off US will be complete garbage. I'm in the US and absolutely love Wagos but get nothing but hate from my peers. it's so stupid.

I had them melt before but they are great. I use them at work industrial place to wire 3 phase 480v motors low voltage sensors 24v to 48v etc or for simple wire splicing the older guys don't like them and they will cut them off when they feel like they need replacing

@@nightmareinaction629 your company should rethink some of their employees status. If someone was doing something as stupid as cutting a wago off because no likey then they are probably not working with me very Long after that.

Interesting

Wow that really interesting

Also, they use it for bedding, just as you assumed

@@anthonyfriesI think it’s more bedding than anything

Urban legend, it's just for bedding. Why would they want to make a nest in a pile of rotting food? c'mon.

That's why you wrap with electrical tape. No need to reinvent the wheel

@@marioramirez6741 If you have to use tape then its already a poor choice...

​@@hawk_nessand what do you use? Wire nuts XD!

Well then you've never seen melted before on heat strips. They can't handle high amps.. at all.

😂

Always have to smile when some americans for whatever reason freak out about WAGOs. These days those are what is almost exclusively used here in Germany. I guess people would freak out here if they see wire nuts. I am sure I can get them on Amazon, but at least no supplier for electrical stuff and no hardware store here sells wire nuts. In the past you would more commonly find screw clamps for such installations. Today it is Wago or wago style. If you are lucky the levered ones, mostly in installations you will find the ones without levers. depends on the installer. I cannot even tell if according to our electric code wire nuts would be legal to use at all. I think I heard those would be perfectly fine and had been used in the past, not only in Germany but even more so in the Netherlands for example. Might be they are more common with our neighbours. but as mentioned, if they are legal to use, at least no one sells those. And looking at the space we have in our joint boxes, I would prefer WAGOs any time anyways. That youtuber, was it possibly that guy from Project Farm? But I think there might have been several who did such tests already, adn the WAGOs if I remember right, had been as good as, or in some cases even better than wire nuts. They are tested being sprayed with saltwater mist, they test how much force is needed to pull out a wire, they test them if they loosen up under vibration. Personaly I had never one open up so far. Of course you have to check the size used for what electric curent they are rated. I think the smaller ones are officially rated for 32 A at 450 V, while the bigger ones go up to just over 40 A. I think they had another rating for 600 V, but cannot remember the AMperage there.

I think that was John Ward that did that. And yeah, if you have a fire due to the Wago connector it's because you're running so much current that nothing would be safe.

Where do you usually get your Wagos at locally?

@@leviweltin1163 Amazon actually. Nobody stocks them locally so I buy what I normally expect to use in a 2wk period plus a bit extra. If a bigger job is coming, order ahead.

In Europe we have used Wagos for over like 20 years already. I love them.

I’ve had wire nuts melt but never had a problem with a wago

⁠@@ntsecrets When I started out we twisted all the wires an solder them wrapped friction tape on them. Then we had the collar an tighten the set screws an put a rubber diaper on it . Then we did the twist wire nuts . An now I use wagos. Most secure? Was the twisted an soldering but not user friendly an was a resistance problem, mini years down the road in damp areas. The twist locks were great but in high amps an heat they tend to back off an like you said melt. The wagos? Are far the fastest an best to check voltages.. I have had no problems with them other than one time a locked up rotor an a over fused disconnect did deformed it unusable. But that was not the wagos fault.. but Out of old habits I still give them a 33 plus wrap of tape when is multiple wagos in an connection box just for safety coz I have had them pop open when stuffing bunch in…. But even years ago had connections twisted an solder melt an fry the friction tape 😂😂😂

Ughh,wire nuts.🤮🤮

Wire nuts and wagos are all fine at lower currents.

I mean you could just wrap some electrical tape around the wago to hold the levers down if you're worried about it popping up or hooking on something

Seriously doubt they would arc over, unless under sever overvoltage or some monkey installed someting seriously wrong.

@@Sixta16 they were taped back to back on an ice machine and they arced thru and melted. Only happened once but it did. Look at the internals. The plates are very much not centered. Maybe it was a fluke or a defective wago but I haven’t given it another opportunity. I still use em just the heavier bodied ones. Plus the heck body clips don’t pop up like Chris mentioned 😎

​@@restaurantrepairsbut the 222 seres levers hurt a lot worse

... barbaric ... 😂 ... made my day. Har det so godt.

or just hose it with brake parts cleaner....

oh dear god

Nah I didn't get stung

I think he was previously, not sure if he still does. Perhaps he didnt show it in the video that he tapes them

It is a digital tachometer

They come from Dodge that way, adding more grease in maintenance intervals as the unit runs depends on the operating conditions

No but one of my guys did a month later at the location