Every Single Filament Part 4: CURSED FILAMENT!

Подписаться 546 тыс.

Просмотров 765 тыс.

50% 1

40+ eldritch filaments to sow chaos and shatter the mind.
Watch Keysight Source De[Code] now! keysig.ht/hKVYlj
Support me on Patreon - / zackfreedman
Meet me on Discord - / discord
Filaments:
Alga by 3DPrintLife amzn.to/3LxAaSo
Buzzed by 3D-Fuel bit.ly/3yKC8aB
Pneumatique by Treed amzn.to/3YXGwxx (unavailable)
Matte Pine by Protopasta (couldn't find exact match?)
Laywoo-D3 Flex by Lay bit.ly/3JmoX4q
Laywoo-D3 Meta5 by Lay bit.ly/3Z2nqpU
Matte Fiber HTPLA by Protopasta bit.ly/3ZZyHsz
CF-TPU by SmartMaterials bit.ly/3FuvbhB
Glass Filled PLA by 3D-Fuel bit.ly/3Tog8f3
Reflect-o-Lay by Lay bit.ly/3FyHuJz
PA 4535 CF by Jabil bit.ly/3Lyr5Zu
Easywood by Formfutura amzn.to/3n6T8W0
Stonefil by Formfutura bit.ly/3yMozHJ
LW-PLA by Colorfabb bit.ly/3lsEsQn
LW-ASA by Colorfabb bit.ly/3Typx3S
VarioShore by Colorfabb bit.ly/3n4lgcf
Ultrafuse 316L by BASF bit.ly/3TobOwo
UV Color Change PLA by Inland bit.ly/40hN8aZ
TPG PLA by Fiberforce bit.ly/3lpJg9a
Stellar PLA by Inland bit.ly/3Fyz8le
Glitter Purple Glow PETG by ZiRui amzn.to/40kRY7g
SimuBone by 3DXTech bit.ly/3mXxhjz
Coextruded PLA by Tecsonar amzn.to/3JPl8pI
Blue Raspberry Quantum by Matterhackers bit.ly/3YUNm6R
Ninjaflex by Ninjatech amzn.to/3n4mfZZ
Filaflex 70A by Recreus bit.ly/40h04xR
Taulman 230 by Taulman bit.ly/40j3cte
Cleaning filament by Esun amzn.to/3ZWX0r1
Cleaning filament by Inland amzn.to/3FDb00T
Growlay Brown by Lay bit.ly/3yPcGkk
Layfelt by Lay bit.ly/3JPtQUV
Layfomm-60 by Lay bit.ly/3lilsEl
Gel-Lay by Lay bit.ly/3Jv1XjR
SR-110 by Stratasys bit.ly/3n5gtHg
Ionic by Matterhackers bit.ly/42yWgtY
Filament Splicer by Ideaformer amzn.to/42ff6pE
3D-Printable Filament by Turbo_SunShine bit.ly/3LyKKsb
Wood Cork Glitter by Azurefilm bit.ly/3ZY6AKe
PC-PTFE by Nanovia bit.ly/3lpKgdq
Trimmer Line by Harbor Freight bit.ly/3JPqoK0
Beef filament video by 3D Printing Nerd - • WE Made Smelly Filamen...
THE MEAT courtesy of Repkord - www.repkord.com
LW-PLA blog post by CNC Kitchen - bit.ly/3n6Qu2w
Cursed Benchies:
Ghost Ship Benchy by JDMac174 - bit.ly/42lZuRn
Benchymobile by ZachHanze - bit.ly/40eW3tQ
Christmas Benchy by foambrick - bit.ly/3ZWpMrS
Benchy Ashtray by snappy374 - bit.ly/3ZdshF7
Floating Benchy by vandragon_de - bit.ly/42qsdof
Buff Benchy by Breakdansen - bit.ly/3TsGzQO
Tank Benchy by Chriswk - bit.ly/3Fz9z3o
Benchy Rock by zzubnik - bit.ly/3yQlSEO
Bunny Peep Benchy by fixumdude - bit.ly/40kHuoq
Smuggler Benchy by Mohawkmade - bit.ly/3yP2ZlD
Top Hat Benchy by bs_brsm - bit.ly/3lgYTzS
Thomas the Benchy by OZVALD3D - bit.ly/3n0Wcmk
Pirate Benchy by Ramblin73 - bit.ly/3YWyVzd
Cherry MX Benchy Keycap by PBX23 - bit.ly/42rpaMj
Benchy-prise by Scotty-G - bit.ly/3JNkmd2
Benchyhcneb by MPKOTTOWA - bit.ly/40dK2p7
Dakota Benchy by ATXjerry - bit.ly/3FAql2p
Flex Benchy by leesherm - bit.ly/3LvHAWn
Sponsored gear:
E3D Toolchanger printer - bit.ly/3lUC693
FLSun V400 printer - bit.ly/3LE0BpL (use coupon code zfv400)
Lulzbot Taz SideKick 747 printer - bit.ly/3FyX6go
Bambu Lab X1C printer - bit.ly/3ljUM67
Diamondback nozzle - amzn.to/40jnVx6
E3D Obxidian nozzle - bit.ly/3FxX1JI
E3D Revo extruder - bit.ly/3lmaxcF
Wham Bam PEX plate - bit.ly/3lpmFcW
Timetable:
00:00-00:38 Intro
00:38-02:11 Algix Alga
02:11-04:04 Special Thanks
04:04-05:22 Buzzed
05:22-07:09 Pneumatique
07:09-08:18 Aromatic Pine HTPLA
08:18-09:27 Laywoo-D3 Flex
09:27-10:15 Laywoo-D3 Meta5
10:15-11:40 Matte Fiber HTPLA
11:40-13:27 CF-TPU
13:27-15:17 GF-PLA
15:17-16:33 Reflect-o-Lay
16:33-18:06 PA 4535 CF
18:06-19:08 Easywood Coconut
19:08-19:39 Stonefil
19:39-21:17 LW-PLA
21:17-22:21 LW-ASA
22:21-23:17 VarioShore
23:17-24:01 Metal Filaments
24:01-24:51 Prototype Copper PETG
24:51-26:58 TOASTED MEAT BEEF JERKY PLA
26:58-27:51 UV Color Change PLA
27:51-29:58 Pantone TPG PLA
29:58-30:53 Stellar
30:53-31:31 Glitter Purple Glow PETG
31:31-32:37 SimuBone
32:37-34:10 Coextruded
34:10-35:54 Ninjaflex
35:54-36:44 Filaflex 70A
36:44-37:37 Taulman 230
37:37-39:45 HDPE
39:45-41:44 Growlay
41:44-42:47 Poro-lay
42:47-44:41 SR-110
44:41-45:51 Buttermilk
45:51-47:56 Filament Joiner
47:56-50:32 DIY Dual Color
50:32-51:10 Cork Glitter
51:10-52:20 PC-PTFE
52:20-54:18 Trimmer Line
54:18-59:06 Outro and Thanks
Printing nerd certificate of authenticity: bit.ly/3OFXegf
Licensed content:
Interference SFX - Partners in Rhyme
Other SFX - zapsplat.com
Fat beat - rudemuzik.com
Vapid stock footage - storyblocks.com
Fortus footage - Stratasys

Наука

Опубликовано:

17 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,7 тыс.

@justDIY Год назад

Thanks for pushing through the painful challenges to bring us this video! 👍

@davidcolson1900 Год назад

Made it through Hell and high water

@pseudotasuki Год назад

Four lungs were sacrificed to bring us this data.

@theorigamidragon6711 Год назад

20:44 didn’t laugh

@steamkaptain9234 Год назад

@@davidcolson1900 literally

@tyronlloydbaron781 4 месяца назад

@@davidcolson1900 like his house depended on it

@Roy-K Год назад

On the Pantone thing: the concept of having a library of standard colors guaranteed to match across all manners of textiles, papers, paints and plastics is EXCEPTIONALLY useful for designing things that need to be color matched (I.e. literally anything mass manufactured). In practice, copywriting freaking colors and charging though all orifices for the “right” to use them is INSANE

@whatr0 Год назад

Yeah, I think a lot of people misunderstand the purpose of Pantone. Although I mostly put that blame squarely on Adobe because of their dumbass blocking of Pantone colors for literally no reason (like unless you're paying Pantone somewhere else in the chain, just using the colors in Photoshop or Illustrator wouldn't even matter).

@MrTeathyme 11 месяцев назад

@@whatr0 as i understand it adobe doesnt block the colors, it blocks the color picker for pantone colors, which is the digital version of pantone paint chips So just like how in the real world if you somehow know how to get the specific color of pantone green you want without referencing a pantone chip you absolutely can In the digital world you can do the same thing But youve gotta pay for access to the reference chips, be it real or digital Thinking about it that way, its alot less bad tbh, like yeah i can accept that if i want to use a reference system i should probably pay for it To that end as well, pantone colors are only valuable if you need to provide a specific color to a manufacturer of some kind, since all they are are standardised colors, all the same colors exist on the color wheel normally just without the standardised names, which effectively means the only people who "need" to pay for a pantone sub are businesses anyway

@MibaCallabus 11 месяцев назад

This really had me thinking about Stuart Semples rant and activism against the guy who copywrited the blackest black.

@SissypheanCatboy 11 месяцев назад

@@MibaCallabus Anish Kapoor didn't copyright a color, he took exclusive access to the entire artistic usage of vantablack, which is a _material_ , not just some brand name for a color. That'd be like someone owning the sole right to use an entire type of paint.

@jenniferdunstan5065 11 месяцев назад

@@SissypheanCatboy that's exactly what copyrighting is

@PraxZimmerman Год назад

I've never 3d printed anything in my entire life, but your comedic timing and excellent writing is just so enthralling.

@monicat6797 День назад

you HAVE to get a printer

@Sevansx360 Год назад

I love the "aww neat" unknowing response. The insane odds of cutting to future zack and such a time is amazing.

@mykolask Год назад

A role model on not giving up, Zack!!!!! Thanks for yet another great video

@grn-xx Год назад

Also he ain't let us down with the nerd certificate

@alennaspiro632 Год назад

The rubber filament seems pretty useful to me! Print rubber feet on your prints, or just make the bottom few layers rubber and you have non-slip prints!

@jimmysgameclips Год назад

That is an awesome idea

@unfa00 Год назад

Or print perfectly fitting gaskets?

@WhenDoesTheVideoActuallyStart Год назад

You can just use... normal TPU/TPE filament. No reason to go for the burnt tyre smell DLC.

@warrenwiz5 Год назад

Why not just buy rubber bumpers/cabinet door bumpers or adhesive rubber sheets? Feel like that would be quicker and easier for most applications; but I'll give you a niche use case for some custom/specific items.

@WhenDoesTheVideoActuallyStart Год назад

@@warrenwiz5 I mean if I had TPU filament and a 3D printer, both ready to go, I couldn't be arsed to go to the store.

@Stoney3K 11 месяцев назад

That lightweight PLA material is *absolutely perfect* for making custom foam inserts for storage bins and tool drawers. Usually those are CNC milled out of hard PU foam, but there's no reason you can't print them.

@the48thronin97 8 месяцев назад

I remember getting my first 3d printer in ~2012, and distinctly remember ninjaflex being incredibly notorious. I haven’t printed seriously since then, and still remember that, kinda wish I’d tried it at the time just to be able to appreciate it more. Edit: I also remember hearing arguments between hdpe and pla, the way we’d get stuff to stick was blue painter’s tape. No glue sticks, no kapton tape, no hairspray. Thanks for the nostalgia trip!

@tiepup Год назад

Thanks Keysight for keeping this excellent channel on the air. And thanks to you Zack and Brooke for fighting the hard times to keep providing excellent content.

@soundspark Год назад

At least the sponsor is legitimate this time and not a scam or potentially illegal.

@mineyoucraftube1768 Год назад

@@soundspark did i miss something?

@soundspark Год назад

@@mineyoucraftube1768 Just a lot of sponsors on RU-vid are shady at best.

@Sloxx701 Год назад

@@mineyoucraftube1768 Maybe hes talking about Skill Share? I know thery've been called out by multiple other RU-vidrs for being horrible.

@mineyoucraftube1768 Год назад

@@Sloxx701 didn't know that, thanks

@Distanc3 Год назад

Astoundingly, this amusingly articulate RU-vidr adeptly employs alliteration as an artful comedic device, always aiming to amuse and astound audiences.

@melimsah 8 месяцев назад

He and CGPGrey could have an Awesome Alliteration Argument for the Ages.

@desertraven83 3 месяца назад

How do you not have a blooper reel? I know your wife has to be laughing her ass off the whole time. Love your delivery ❤️

@unfa00 Год назад

I'm waiting for a tri-split Normal Filament. So whatever you print looks like you're looking at a normal pass from a 3D render.

@sparrow6190 Год назад

I think the meat filament PROBABLY printed so well because of the slight bit of fat acting as a lubricant I love that matt fiber htpla, the print was beautiful

@elHippieSupremo Год назад

that is brilliant. that could have some useful applications. I wonder what other lubricants can be used as filament amendments. perhaps glycerin or something.

@GldisAter Год назад

"Voidstar Lab is now permanently perfumed with burning rubber. The only option is to send in an even stronger funk to beat the shit out of the first one." - Zack, as he summoned the flood to clean out the stench. Did it work? Did Voidstar Lab still stink of burnt rubber after the flood and mold?

@cozyGalvinism Год назад

That's something the lizards will have to figure out and deal with :D

@robertwurster6736 Год назад

Self Drop in place of Mic Drop was pure genius! Thank you for all of the entertainment. It can not be easy to be so creative all of the time. I admire your script writing and your sense of humor. Keep up the good work. You make us nerds look good!

@IanBradbury Год назад

Awesome work on testing the filaments and writing the script. Love it. Good luck.

@huntboom288 Год назад

this is my favorite video "series" on youtube for a 2 reasons. 1. Super entertaining and interesting information. 2. My S.O. often needs to listen to something to fall asleep to, and these videos do the trick, putting her to sleep within 2 minutes whilst keeping me entertained. We have contributed a ridiculous number of views to this video series because of this use case.

@HendoRising Год назад

For some reason I read this in Zach's voice.

@Lexercise27 Год назад

I wonder whether this is a compliment or not haha

@bcc5701 Год назад

Oh shit I do this too- my wife is out like a light

@taitano12 Год назад

@@Lexercise27 It's both; AKA a backhanded compliment.

@VocalHero86 Год назад

Funny story in reference to your use of string trimmer line as printing filament-- I essentially did the opposite. I ran out of string trimmer line halfway through edging my front lawn and my car was out of commission so I didn't have transpo to the hardware store to get more until after they were closed, but what I DID have was a spool of bright green TPU, so I figured why the hell not? Gave it a shot and it was.. surprisingly adequate. Not fantastic by any means and it was certainly a slower process because it wasn't as "sharp," if you will, as regular trimmer line, but the only other filament I had was PLA and it would have been far too brittle and weak. In summation, TPU more or less came through for me in a weed-whackin pinch. Now let's never speak of this again. Oh, and thanks for another phenomenal video, F-Man.

@dwatts51187 Год назад

Of all the maker channels on the tube of yous, voidstar labs is my favorite and one I look forward to. Thanks for all you and your wife do for us as a community. Very happy that you were able to get through the bs that happened.

@BruceNJeffAreMyFlies 8 месяцев назад

Glass fiber is usually introduced to plastics for impact resistance rather than any other measure of strength. Things like tool cases, the plastic on power tools, anything a tradesman might use, usually have glass fiber reinforcement to stop them shattering as they get banged around by big solid steel tools.

@Trekeyus Год назад

Considering what all you went through to make this video reality you did a fantastic job. Feel bad about the old lab but I'm glad you're moving into your new place. Those filaments are extremely cursed.

@MatthewWathen Год назад

Don't know if it's been mentioned before, but Inland filament is rebranded eSun. Another good use for the filament at the end of a spool is to get a 3D printing pen and use it to patch up failed prints. Fill in the blemish, sand, prime, and paint.

@ross2k220 Год назад

Are you sure this is true? inland seems to be decently cheaper and comes on different spools

@p0tat0s_ Год назад

@@ross2k220 most are B grade spools of eSun, they do rebrand some other brands as well though like their Tough PC being Polymaker Polymax PC as mentioned by Zack in I think the first or second one of these videos

@Cooldanman22 Год назад

MICRO CENTER PRO TIP: Any inland filament with a qr code is esun manufactured (pla+), any with the biodegradable leaf is manufactured by polymaker (pla pro, most normal pla, etc)

@andrereuter6521 Год назад

When I made my first 3D printer I was very excited and still skeptical that the thing would actually work so I couldn't wait for the filament to arrive and decided to test with trimmer line, without having no idea how hard it is to print. It more or less worked, I was really proud of the machine, you brought a fine memory to me.

@silverstrings5569 7 месяцев назад

The simulated bone bit: I ordered a few infant tibia replacements for our Intraosseous infant trainer, since they discontinued the original replacement parts. It really is a great thing for the medical field, prehospital and in-hospital. Always wondered what they used, and now I know. Now if I can get some TPU veins for a IV trainer, we can finally get THOSE trainers up and going.... Seriously, 3d printing has revolutionized so many things people don't think about, thanks for showing off some of these super oddball filaments, it makes things unexpectedly much more affordable and even possible!

@heyspookyboogie644 Год назад

Love these episodes. Such a good reference when you have a weird special need for filament and need more than specs and cleaned up deceptive samples.

@thedanyesful Год назад

The script for this was incredible, and the filaments were like an alternate universe I never knew existed. I can't imagine any of these are commercially successful, but I'm getting the feeling that's commonly not a consideration for filament makers.

@RedRavenRuler Год назад

So grateful you were still able to put this video out!!! Thanks for the fantastic content and keep up the hard work!

@kellen987 Год назад

I love that most of the shots in the previous lab just have RUN plastered across Zack’s chest, a nice warning from the past.

@mattszski8586 Год назад

Thanks for continuing to provide people with pleasingly playful poetic pieces!

@JaredConnell Год назад

This amigo is always an architect of awesome alliteration in all affairs

@realjettlag Год назад

@@JaredConnell What you've got there is assonance. ETA: "Alliteration is usually described as the repetition of the same consonants, and assonance as the repetition of the same vowels." source: Department of Linguistics and English Language (LAEL) at Lancaster University

@freshcashews Год назад

@@realjettlag no, I think this is alliteration. P isn't a vowel. edit: looking back, I realized that jettlag was talking about the first guy's reply. i am dumb, and I misunderstood this. i offer up my sincerest apologies.

@raisonjade4379 6 месяцев назад

Bruh

@jakedewey3686 Год назад

CS (as in the riot control agent) is a solid at room temperature and melts at 93C. What could be more cursed than a filament that makes you cry when you print it, or when you handle the part afterwards?

@deshazo_henry Год назад

I don't own a 3D printer, I probably never will. I do enjoy watching the videos and I've got to say with all the tangents, the rhyming, and the puns this has been one of the most entirely delightful review videos of 3D printing filament I've ever seen, thank you!

@krisjclark Год назад

I'm only like 20% into 3D printing, but 110% into your writing, editing, and video work. I just wanted to say that I see you and you are awesome!

@devnol Год назад

I was gonna say "wow dude bothered to make a certificate of nerd" and then I realised I fell for the oldest trick in the book.

@quinbee_creates Год назад

I was hoping for some kind of really ornate colorful graphic design but instead was treated to the greatest pop song in history.

@SollowP 10 месяцев назад

For ideas for filament additions. I would love to see what something like Black 3.0 would do. Blackest black filament :D Creator of the color is also very much about "this belongs to everyone (Except Anish Kapoor). The color was basically made in direct response to Anish Kapoor buying the exclusive rights to vanta black.

@StoanElliott Год назад

"sulphuric miasma" might be the new way I describe bad smells. Loved that whole sentence

@pseudotasuki Год назад

I love HDPE because it's so easy to mill, so easy to recycle, and so resistant to friggin *everything*. But that also includes sticking to anything, including itself. It's basically the silicone of thermoplastics. And hooboy does it ever warp!

@elHippieSupremo Год назад

Did I find the one person recycling grocery bags into filament?

@WhenDoesTheVideoActuallyStart Год назад

@@elHippieSupremo I find that grocery bags made of PE are usually made of LLDPE, which is positively horrible for 3D printing. Milk jugs are more likely.

@steejans Год назад

The foamed pla seems like it would be amazing for lost pla casting!!

@seanburke997 Год назад

This was an amazing rundown, thanks!

@MargolinLabs 7 месяцев назад

Late, but I printed with the SR-110 as support for years in 2 different robot companies in the early 2000’s. If you get good gloves, the caustic lye is not bad. We never had anyone get burned and no one was that careful.

@szymonjastrzebski2909 Год назад

Oh, Zach, on topic of PTFE, it decomposes visibly above ~230-250C releasing some neurotoxins, it's "melting point" is around 260C which is why terrible printer manufacturers list 260C as max temp. Not something I'd want print with. And I have to print with it

@oliverrose7796 Год назад

The section on how to use filiment remants reminded me of something that I've been thinking about a lot recently: There's a lot of situations where extra material is needed for something, despite the fact that it won't make it into the final product. I knit and sew a lot, and have been thinking about in it terms of the extra yarn or thread that is needed to properly sew or cast on your knitting project, because you need something to hang on to or slack for proper needle movement. I wasn't able to find a term for this, but I think you could say the same about the bit of filament left on the spool.

@TryinaD Год назад

Provisional spool space? Like provisional cast on but for 3d printing-just made that up

@orngjce223 Год назад

I know in fibercrafts you can use the chopped remnants as stuffing for small objects; I assume the 3D printing equivalent of this is shoving it in the infill.

@ShignBright 11 месяцев назад

Why is nobody talking about this guy's amazing alliteration artfulness? His adept articulation is a reason to feel accomplished.

@ScoutsIX3 Год назад

I generally only understand about 50-75% of the things you talk about, but what really keeps me coming back is your razor wit and wordplay!

@WowCoolHorse Год назад

It's pretty incredible you were able to make this video through all the challenges, great work

@nddragoon Год назад

iirc the thing with pantone is that they're not really claiming to "own the color", they only own the standard they use to name and match them. the photoshop thing is basically so that you can guarantee that a pantone color in your screen will look the same irl even across materials and such, and it blacks it out when you paint it specifically referencing it as a pantone number, but you can replace it for a corresponding hex code or HSV value no problem. it's still ghoulish and horrible, but i'd say not quite as bad as you... painted it... ha

@KaitouKaiju Год назад

They do patent the colors though, so fuck em.

@FowlerAskew Год назад

Yeah, pantone doesn't really make sense for filament, but it's very nice to have when you're having products manufactured or printed

@cheeserdane Год назад

As a dnd nerd could have told you plenty about this. Chain mail makes bludgeoning damage worse and doesn't do crap for peircing.

@Cwayne1989 Год назад

Dude thanks for this series. You've done such an amazing job at bringing all the different types of filaments to light. That me nor many others newer to the hobby didn't even know existed.

@StraungeYT Год назад

Glad to see you were able to get the video put together through everything. Can't wait for the next part!

@Enjoymentboy Год назад

Just think, even though someone saw all that algae and thought that it would be great to turn into filament for us to print with, there were likely more people who saw it and thought it would be great to turn into food for us to eat. Let's be thankful that they went with the filament.

@BrennanFalknerDev Год назад

I like the effort you've put into your writing. Very entertaining.

@Bashere Год назад

SR-110 is mainly used as support for nylon-12. I hated using because of the smell. It also takes forever to dissolve in hot lye. ABS used PVA as support. ULTEM has its own as well. The canister is designed just for controlling moisture. The Fortus printer constantly sends dry air into the filament path all the way to the hot end. Just leaving the drive wheel cover open let enough moisture in to destroy the nylon.

@nickenomics Год назад

The commitment to the falling bit have me laughing more hard then I've ever laughed at a 3d print video

@luke_fabis Год назад

The Poro-Lay filaments work pretty well if you reheat them after printing. A bit more aggressive than annealing, a bit less aggressive than outright remelting. You're going to want to pack your parts in a ballast material to have them hold their shape. In my experience, Poro-Lay parts may fall apart if you soak them fresh after printing, but they're not too bad if you do some heat treatment before the PVA washout step. They're useless for any structural application, but they are pretty nice if you want to experiment with shock absorption or acoustic damping, or if you need a very compliant material.

@jenniferdunstan5065 11 месяцев назад

Cool

@jamesmcgraw4584 11 месяцев назад

zack, you are a goober in the best way. I really appreciate the alliteration.

@Pinfari13 Год назад

I do a lot of 3D printing for combat robotics, and TPU has been growing in popularity in the past few years. It's an alternative armor to titanium plating that eats up the energy stored in spinning weapons and slowly shreds rather than catastrophically shattering. I wonder how the CF-TPU would perform in that application.

@Reverend_Salem Год назад

the cf tpu might be useful for applications where you want a stiffer flexible part. one example may be rc planes for the landing gear struts, or at least the springs for the struts

@WhenDoesTheVideoActuallyStart Год назад

A stiffer flexible part? So, TPU? Polyurethanes can be made stiffer than ABS. Stiffer TPU's are usually sold as TPU with high Shore hardness.

@digitalbarrito3555 Год назад

Zach, I just want to say, every single time you upload is a treat. Thank you for doing what you do

@dsprecision4782 8 месяцев назад

"Look im trying to be mature here but thats doo doo baby" 😂 Your videos and humor are priceless

@utahgamer Год назад

Laughed to tears at the fun filaments and funnier delivery. This made my day.

@ccpowerhour7607 Год назад

I love when the Magic jokes leak into the videos ("more keywords than an EDH deck" got an actual guffaw out of me). I don't even own a 3D printer but I've been a subscriber for the great writing and commitment to the bit. Glad you were able to salvage your living situation, can't wait to see the new labs once they're done!

@keiyakins 6 месяцев назад

don't forget the bureaucratic blind eternities

@nickjones3036 Год назад

In 2019, Makerbox enclosed a sample of Pneumatique, and I printed pliable eyepieces for my $15 thrift store Japanese microscope. Thank you for providing the opportunity to don both eyepieces simultaneously as stereomonocles and view your review of the stinkiest filament I've ever extruded through rings of said stink. They smell fine now, 4 years later.

@tyw877 Год назад

Honestly the purple uv-sensitive pla might be useful for determining whether an area has uv leakage, say for sensitive applications or just to test lights

@nilshalvorsen9541 Год назад

Amazing video. Thx for keeping up with the content pipeline after all that happened

@RangerOfTheOrder Год назад

Thank you for not giving up! I love your videos and this series especially!

@_Simon Год назад

The effort paid off. Well done zach, what a great video.

@zeke7515 Год назад

Did you really just label this video #4 to make us search for #3 endlessly.

@lancecape8021 26 дней назад

Part 3 link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pF2akallRiQ.htmlsi=XgeCpbHZg_hSWspb

@Grumskiz Год назад

The CF-TPU made me so happy :') The way it crinkles when you bend it is amazing

@interwebhatemachine7 Год назад

My third and final wish for the Every Filament series is that... Zach is Freed(man) from the every filament series. One eternity of suffering for my entertainment is enough.

@RNMSC Год назад

Best use I've found for the end of spools if there is enough to hang on to, has been to print paint corners or really small things that are useful around the house.

@zramirez5471 Год назад

I'm not even close to interested in filament printing but listening to you do your thing has mee hooked dude. Subscription achieved.

@ScottyMcCraigles Год назад

This is such a joy to watch and listen to! Love your sense of humour 🤣 Keep up the amazing content.

@ThePongles Год назад

Should do a black mold flavoured filament in honour of the old lab.

@shoofle Год назад

oh wow, the diy multicolor printed filament actually looks really cool, like striated layers in rock!

@0Rookie0 Год назад

Man, I don't even have a printer, but this series is so interesting. I want to try the meta two tone filiment trick but I've never even used a printer before haha! Thanks for going through the work to not only print a proper benchy but the logistics of acquiring all of these! Final episode will be a banger, can't wait! Ps, grats on surviving and the new house!

@SantisNight Год назад

I'm so happy I found this channel- i don't even 3d print.

@Eric_Wolfe-Schulte Год назад

I laughed, I cried, I threw up in my mouth a little

@PatchCornAdams723 2 месяца назад

29:20 I like how you used the hex code instead of the Pantone code.

@camelvermeulen5718 5 месяцев назад

For great information and a greater uplift of my day, your videos are awesome! Thanks man

@BruceNJeffAreMyFlies 8 месяцев назад

I got a roll of esun matte black pla for like a dollar more than the regular black pla and I gotta say, it looks gooood! The matte really helps to minimise the appearance of printing lines, and imperfections during printing or dirt after printing is a lot harder to notice.

@EricStorms Год назад

Another masterpiece!!! 🎉 thanks for pushing through. Excited for the next chapter of the void star labs adventure!

@Lumie_Moth 10 месяцев назад

the blahaj joke was a nice touch, love it 💚

@FrogglickerSpace Год назад

Not only educational but funny... you damn near killed me! Great vid, Zack!

@TelephotoTom Год назад

As someone who only prints the peasant's filament aka PLA, I absolutely love these breakdowns, Zack. Great work!

@heyspookyboogie644 Год назад

I wish I could get this whole series of videos in a pdf with some little note about what was already discontinued/rare at the time.

@HeadCannonPrime Год назад

So now that we have expanding foam filament (was it PLA?) Can we now print custom protective foam inserts for tool boxes or model transport cases? That could be pretty cool!

@tomhsia4354 4 месяца назад

We have foaming PLA, ASA, and TPU.

@AlexDoesYouTubes 8 месяцев назад

"For reasons unknown to petrol billionaires." I knew I liked Zack.

@xblinkusedfinchx Год назад

Great video! I kinda like the purple glow filament!! Keep up the quality work! Don't ever get rushed or pressed to make a video if you don't feel it's right. I love your authenticity.

@joshcool Год назад

Thanks Zack. You’re the best!! Also, are you going to test out the new Bambu PET-CF Filament?

@AzaB2C Год назад

This is the episode I didn't need, but am cursed to watch, the curse of being ZackiStani

@brucepreston3927 Год назад

This is my first time watching, and I have to say, this was awesome!

@marcusborderlands6177 Год назад

Just want to point out that on the Pantone one, the COLOR itself is not copyrighted, its the color defining (cant think of a better way to describe it) system they use that has been copyrighted. Basically theyt maintain standards that ensure that any color you need can be produced without the need for tons of back and forth with a factory. Lets say you have a T shirt that needs to be a certain color to match your specific logo, so you send a picture of the color over to a factory. Well their monitors might not be calibrated correctly and every sample they send you is totally off, so instead you find the pantone designation for that color, send that over, and as long as they have a pantone reference book/chip set they can EXACTLY match that color for you, and save MONTHS of waiting and failed samples. although putting that in 3d printing filament is kinda dumb.

@ghostdog0424 Год назад

33:39 TRANS RIGHTS!!!!!!!!!!!!!!!!!!!!!!!!

@winterwatson6811 Год назад

🦈

@rudeskalamander Год назад

He's a huge ally

@freshface7657 Год назад

This is one of the greatest videos in the Maker/ 3D Printing space I have ever seen.

@HeadCannonPrime Год назад

With all these wood filaments, maybe you could do a test on which ones take well to staining, carving or cutting? I would love to print something that looks and acts like real wood.