Тёмный

EVERY SINGLE Lightsaber Crystal Explained [Canon + Legends] 

Vader's Fortress 2
Подписаться 75 тыс.
Просмотров 885 тыс.
50% 1

Lightsaber Crystal's were deeply connected to the force, allowing the wielder of the blade to become deeply binded to it, almost in a symbiotic way. This connection to the force also allowed for some unique properties. Kyber crystals didn't just channel and focus energy, they amplified it. This was what allowed them to be used as the heart of a lightsaber, or as weapons of mass destruction, making these crystals highly sought after. However, kyber crystals from Illum were not the only kind of lightsaber crystal. As Luke Skywalker once pointed out, the flexibility and practicality of the lightsaber design meant that pretty much any crystal could be used to focus the beam of raw energy emitted from a lightsaber. However, some Crystals were far more sought after than others, largely due to the unique powers and properties of these rare lightsabers. Some crystals increased the heat of the blade, some granted the wielder additional powers, while others could increase the power of the user a thousand fold.
VF Sabers Essential Collection: vfsabers.com/collections/pre-...
In this video, we will discuss every single lightsaber crystal type from both canon and legends. As I did with the previous videos in this series, this video is vaguely ranked, this time from least to most powerful. So make sure to stick about towards the end of the video to learn about the rarest and most powerful lightsaber crystals. We'll be exploring just over 60 different Lightsaber crystals today and I think this is the most comprehensive video about lightsaber crystal types here on RU-vid. So You'll probably want to grab a drink and a snack as this will be one of my longer videos.
This video also marks the start of my very first lightsaber giveaway. I'll be giving away a saber of your choice from VF sabers essential collection which I'll leave a link to down in the description. All you have to do to enter is like this video and subscribe with notifications on. You also have to tell me what your ideal lightsaber would look like down in the comments section of any of my next 15 videos. Myself and some of my mates will be picking out our favorite lightsaber idea as the winner so make sure to be as detailed as possible. I've commented my ideal lightsaber design down below to give you guys some ideas. Best of luck everyone and may the force be with you.
Anyway, back to the video.
There are quite a few differences between canon and legends when it comes to lightsaber crystals. In canon, Kyber crystals were clear until they were attuned to the user. After the wielder had bonded with the Kyber crystal, it would take on one of the myriad of different lightsaber colours we explored the meanings of in this video.
However, in legends the lightsaber crystal already had its colouration and was simply chosen by the wielder. But just bare in mind for this video that there are some differences between canon, newer legends and older legends lightsaber crystals, which can lead to a few confusing inconsistencies. Many of the legends crystals are also from computer games such as Star Wars Galaxies And The Force unleashed. At times they can be pretty wacky and unique such as the lightsaber crystal that would simultaneously freeze and burn opponents that we will discuss in a bit. My head canon is that these crystals got many of their insane powers through the force, similar to Sith alchemy, but just bear in mind that some legends crystals powers often don't make a lot of sense, especially when compared to the new canon Kyber cystals.
Now we've got that out of the way, we can begin.
First we will start with the weakest lightsaber crystals, which were most often used in training lightsabers. These crystals could not focus the blades energy as well as the other lightsaber crystals on this list and thus would produce a blade more that would sting or a stun rather than maim or cut. There were a few crystals that could be used in this type of blade. The first were Bondar Crystal's, found only in the far orbit of the Alderan system. The weakest and most common form of Adegan crystals could also be used but we'll talk about them a bit more in just a moment.
First we must talk about some of the lightsaber crystals that were worse than a regular Kyber crystal that one could find on planets such as Illum. One example of this would be the lightsaber crystal used by the Daghee Jedi. This blade was zigzagged in shape, was coloured black and silver while emitting a turquoise aura. Although it looks cool, the shape of the blade was likely quite inconvenient for duelling and may have been more of a ceremonial blade. Therefore, I've placed this saber towards the bottom in terms of power, even though I believe it to be one of the most unique looking sabers.
#lightsabers #kybercrystal #lightsabercrystal #starwars #starwarslore #vadersfortress #

Развлечения

Опубликовано:

 

28 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 2,4 тыс.   
@VadersFortress2
@VadersFortress2 2 года назад
My ideal lightsaber is a curved hilt lightsaber using a dual phase blade. I would use the Mantle of the Force as the lightsaber crystal along side a Katak crystal. This would allow me to drain the powers of my opponents while also increasing my own force powers. My blade would also be purple, reflecting how I would use the lightside of the force but edge on the side of darkness.
@alanaskogberg9753
@alanaskogberg9753 2 года назад
Mine would be a crossguard saber with a permafrost and amplification crystal. The colour would be purple as well. I was kind of indecisive between a crossguard or curved hilt.
@justinschmitt5850
@justinschmitt5850 2 года назад
I'd choose the same crystals like you did, but use them in a double bladed split saber. My colour is definitely indigo. If I had the chance, I would craft a curved hilt lightsaber with a ghostfire crystal as a secondary weapon. ☺
@HP_otter32
@HP_otter32 2 года назад
My ligtsaber would be a dualwield that i could conect togeter so i have both dual wield and double ligtsaber just like cal kestis. the kyber krystal would be the impact krystal with a yelow blade and i could be very eficient agients mandalorians
@playstation1hagrid55
@playstation1hagrid55 2 года назад
Am i the only one who wants just a normal lightsaber
@user-of2lb7ek7b
@user-of2lb7ek7b 2 года назад
If you mean double sided and curved handly jeez man you're sick !!!
@justinthenerd5972
@justinthenerd5972 Год назад
No matter what people say I will always love the yellow saber. It just feels like it could be used by anyone.
@cementairbag5918
@cementairbag5918 Год назад
Yellow is underrated for sure!
@iambetterthanyouseriously9811
Like your mom
@joshuaweinbender6075
@joshuaweinbender6075 Год назад
A purified vexxtal crystal was a golden yellow color
@joshuaweinbender6075
@joshuaweinbender6075 Год назад
Yeah especially with a golden yellow purified vexxtal crystal
@colesonjuul1463
@colesonjuul1463 Год назад
Bro, I think yellow lightsabers are just so underrated 💯
@Nine2FiveGamer
@Nine2FiveGamer Год назад
I dig the golden colored sabers. Wish we saw more sentinel lore in the main canon.
@charlesvanheusden46
@charlesvanheusden46 Год назад
thank god i thought i was the only one
@austinlanman162
@austinlanman162 Год назад
Ikr
@CookieDragon-sr8yw
@CookieDragon-sr8yw Год назад
I have a theory that the Darksaber Crystal could be made of some sort of Kyber-Beskar alloy, which would line up with the creator's intention of symbolising both his Mandalorian life and his life as a Jedi.
@averyobrien5550
@averyobrien5550 Год назад
I saw a comment that said it might be beskar, just compressed to the point of crystallization, similar to coal turning into diamond
@Odinfang
@Odinfang Год назад
Oh that’s a juicy theory actually. Given the time of the blade’s creation, Visla actually could have collected beskar and used techniques commonly used by sith to use the metal as a medium for a synthetic crystal.
@westopher3615
@westopher3615 Год назад
The Fulcrum sabers (Ahsoka's) I think are amazing. Lots of Jedi/Sith have dual sabered before but due to Ahsoka's being of two different lengths, each having its own speciality makes them unique and one of a kind.
@silverprimus321boi9
@silverprimus321boi9 Год назад
I think it's to give off a samurai like reference, since samurais have a daito (long sword) and a shoto (short sword)
@explodeygames7585
@explodeygames7585 Год назад
​@@silverprimus321boi9 i might be wrong, but weren't short swords only used for seppuku?
@GrimDim
@GrimDim Год назад
@@explodeygames7585 Yes and no. Samurai used bow as a main weapon, any form of polearm as a side arm, a katana as a side to the side arm, and a dagger if they were up close. There were no real specific weapons to commit the act of seppuku
@Slemueltodd
@Slemueltodd Год назад
I may be misremembering, but I thought there were shotos in Knights of the Old Republic.
@skywoofyt5375
@skywoofyt5375 Год назад
​@@Slemueltodd yes there were, they were balanced weapons that you put on your off hand to reduce the "to hit" penalty for dual wielding, tho you're absolutely fine just using 2 full length lightsabers with the penalties and stuff after you get atleast the second level of the "Two Weapon Fighting" feat
@thepopemichael
@thepopemichael Год назад
The Ghostfire seems like it would be the best of these. Being able to control the senses of other jedi via your saber would be incredibly overpowered.
@rocketslime4878
@rocketslime4878 Год назад
Combined that with the ability to switch your lightsaber on and off during combat (tutaminis I think) and maybe make the top of the blade tiltable somehow maybe like a pivot and it would be OP
@DrumickD
@DrumickD Год назад
@@rocketslime4878 You can switch your lightsaber on and off during combat, and that technique is called Trakata. The reason Jedi don’t use it is because it was bad sportsmanship and the Sith thought it was a pussy move and showed weakness.
@Odinfang
@Odinfang Год назад
@@DrumickD that’s why it’s perfect for a force sensitive bounty hunter 😂
@alexanderwheeler5328
@alexanderwheeler5328 Год назад
I've always understood Revan's purple saber to be a kryat dragon as that is really the only purple crystal in his original appearance
@domingorodriguez9649
@domingorodriguez9649 Год назад
I've been always fascinated with the idea of a dual-phase lightsaber with an extendable blade. Imagine being able to control the length and use it as a sword, a long sword, a dagger... my ideal would be one with a guardian hilt and if I am able to chose the material it would be beskar, thus nobody could destroy the hilt with another lightsaber. The blade coming from a dantari crystal and matching the hilt in blue as the typical guardian color.
@Vengeance2156
@Vengeance2156 Год назад
Darth Vader had a lightsaber that you could change the length of
@Captain_Yata
@Captain_Yata Год назад
A beskar hilt makes so much sense and I can't believe I never thought about it
@avantasian8610
@avantasian8610 Год назад
Didn't Corran Horn have one?
@ka6hi
@ka6hi Год назад
Isn't the dual phase its own hilt? Or is it the crystal itself? I forget.
@daviddinges9168
@daviddinges9168 Год назад
@@ka6hi it's effectively two different crystals being rotated through the main channel. One would have a longer blade. The other a short blade. And you could swap between them. However those two lengths are all you get and are dependent on the crystals, it also leads to a much bulkier handle too
@dennisthiele2312
@dennisthiele2312 Год назад
My ideal Lightsaber based on how IT works: - Power assembly: Use Same Power cell as R2D2 Basically best cell with good Power Vortex -crystal Energie Chamber: Primary Crystal (power ->crystalenergie): Synthetic kyber crystal send to dathomirs sisters Afterwards Clean and heal it (Most Power,high risk) Fokuscrystals: One big Ghostfire (silent and dumm) 3smaler one Lorrdian (predigt oponent) one Kimber(stun) One Solari (wide Blade) -> Shape of Blade would be Like Pirate Blades, a wide bended Blade, with a dimm violett Shine around the core of Blade in cyan/white. Emitter assembly: Overdrive cycling field Energyzers Blade Arc Tip with Emitter shroud All with Beskar shielding inside for perfekt Energy insulation. The outer Case would be Out of beskar Wood and the bone of a cilobeast in a slight concave Form (primitive but strong and durable) A great sword for a pure Soul, witch Can stun with the dimm Part of the blade for perfect controlled light Side use, but If necessary is deadly powerfull with the core of the blade.
@fatefulbrawl5838
@fatefulbrawl5838 2 года назад
0:00 - 3:10 *Legends and Canon differences* 3:13 *Bundar and basic Krystals* 4:22 *Kyber and common Krystals* 5:53 *Adegan/Methite Krystals* 6:42 *Sith Lightsaber Krystals* 8:51 *Bendular Krystals* 9:54 *BALLER Krystals* 13:04 *Danderi Krystals* 16:35 *Loidian Gem* 17:07 *Dimite Krystals* 17:33 *Blublot Krystals* 18:18 *Focus Krystals* 1920 *Meditation Krystals* 19:49 *DAMAGE KRYSTALS; Liglanal* 21:13 *SUPERNOVA KRYSTAL!* 23:13 *Rare Krystals* 25:56 *AMP Krystals* 32:48 *STRONGEST KRSYTAL* *Lightsaber design: A hilt similar to a standard lightsaber, but can extend itself outwards to rotate, allowing the user to have a special feature were they could use up to 3 different types of saber gems of the users choice!*
@fatefulbrawl5838
@fatefulbrawl5838 2 года назад
@Gladiat271 Welcome!
@user-xd7po2wt7y
@user-xd7po2wt7y Год назад
That is such a cool saber idea
@fatefulbrawl5838
@fatefulbrawl5838 Год назад
@@user-xd7po2wt7y Thanks.
@kevinhilliker8588
@kevinhilliker8588 2 года назад
I like the idea of a green-bladed saber with a very nature like handle. Similar to the Elemental Nature style, but almost like a cobbled together style with wood and plant elements from a variety of worlds. It would be cool to have burn marks and cracked materials towards the blade, to show the signs of the blade interacting with the hilt. It would be less of a weapon for a Jedi, and more for maybe a gray Jedi who dedicated themself to defending the natural world
@Crowliflower88
@Crowliflower88 Год назад
Love this one. So badass because I love the story that goes with it
@antiday
@antiday Год назад
A druidic jedi! Man. would 10/10 play as one in the right DnD setting
@Luchux177
@Luchux177 Год назад
What exactly do you mean by Grey Jedi? There's a bunch of different meanings for the word and I'm fairly sure the term is not canon.
@TheZacek
@TheZacek Год назад
In the animated clone wars there Is wookie padawan who builds his saber from wood
@Top_Cheeze
@Top_Cheeze Год назад
@@Luchux177 you find them in legends, its where all the fun stuff is found, canon is cheap by comparison to legends, canon is for kids and their mom going to watch some entertainment and nothing more, for fans legends is like a treasure chest of fun, I highly encourage getting into it if you like star wars =)
@framerate3003
@framerate3003 Год назад
colored-core crystals in legends are known to be a symbol of status from the wielder all from the Old Republic MMO: a dark core, similar to the one that the darksaber has, means the user took great pride in being a force-user, as it was one of the most difficult core colors to have, which makes sense why the darksaber would be dark as Tar Visla was the only mandalorian to be inducted to the jedi order. Other colored-core crystals would generally be neutral colored with slight highlights, which most jedi would use as a symbol to show their dedication to their morals, for example, blue and green colored lightsaber users who took pride in being counsels and knights would color their crystal's core the same color as their saber's emission, making the white glow of a lightsaber disappear, creating a sort of "highlight" effect to their saber
@Evi_29
@Evi_29 2 года назад
honestly, I just love the though of a saber using both the Krayt Dragon pearl and Black Wing gem. Just imagine plume sof smoke, a glowing black blade, and them the howling. That would be terrifying. Especially if it is a crossgaurd saber, maybe help to vent any extra energy with two crystals. So my ideal saber is a cross guard saber using both the krayt Dragon pearl and black wing gem.
@Evi_29
@Evi_29 Год назад
@LifeRuiner maybe. But you could say the same about duel blade sabers. You just need specialised forms and techniques to develop advantages - like versatility in both guarding and attacking.
@TheBadAssNinjaDude
@TheBadAssNinjaDude Год назад
I once spent ALLOT of time theory crafting my ideal lightsaber. I loved the design I made that was like a molded and stretched out plant bulb, with the Blade protruding out where the plant shoot would erupt, with a Flower-like Tsuba, entirely Organic externals, likely molded over years by the force, like a bonsai tree.
@Evertell
@Evertell Год назад
Thanks for including the crystals from Star Wars Galaxies. That game will always have a special place in my heart and its nice that other people remember it too.
@patrickmcaleese8357
@patrickmcaleese8357 2 года назад
I think my ideal lightsaber would be a dark red colour, with a Kyrate dragon pearl blade. The sound I imagine the Blade would make would scare your opponent so badly they would struggle to fight back. It would also be a double-bladed saber, a crossguard on either side on the saber to stop being able to slide down the blade. I also want the hilt to be made out of beskar, so I couldn't have what happened to maul happen to me.
@Jagger-Tyr_13
@Jagger-Tyr_13 2 года назад
The sound I imagine would be a mix between those war-horns the Mongols used, that howling cat noise, and a doomsday bell. That sort of "get the fuck out" sound when a hurricanes about to hit.
@Jagger-Tyr_13
@Jagger-Tyr_13 2 года назад
The beskar is a nice touch too. I didn't think of that 😄
@kakyointhedonut7369
@kakyointhedonut7369 Год назад
I feel like the hilt would get to hot to hold so maybe you’d need some sort of wrapping on it
@GeoEmperor-
@GeoEmperor- 2 года назад
Dark Lord Starkiller’s lightsaber, with a gentle curve to the hilt for dueling. Powered by a lab grown compressed energy Red crystal and a Black Krayt Dragon Pearl as a focusing crystal for enhanced precision. The crystals would produce a blade that has a Red glow and a Black core when ignited. I hope to build it one day thanks to the inspiration you share about the Passion and Joy of lightsabers! Thank you for sharing your vast knowledge about Star Wars, you are a Beautiful person and you make the Star Wars community Brighter everyday!! May the Force be with you Always!!!
@zephyrstrife4668
@zephyrstrife4668 Год назад
Gonna be honest, one of the things I thought was awesome were the depictions of different Kyber Crystals in the Star Wars RPG that FFG released (Currently being published by EDGE studios instead) There was a lot of variety inspired by the crystals in Legends so each one had a rather unique mechanic for the Force And Destiny game compared to the default Ilum crystal. For me though, I think my favorite type of hilt would be one that incorporates a Tsuba or Crossguard of some kind since I'd rather not even accidentally get fingers sliced off. But I definitely have to say that Obi-Wan's lightsaber has always been my favorite.
@parkinglot1682
@parkinglot1682 Год назад
Imperial Knight lightsabers are my favorite. Loved the standardized look they had. Practical but elegant looking.
@donaldalexandre2641
@donaldalexandre2641 2 года назад
Two saber combo: 1. Small length blade saber: black metallic/red highlights along grip with rounded hilt and properly aligned finger indentations for grip 2. Dueling saber: with long thin blade, black metallic with smooth grip and knuckle bow connected from the hilt to a thick diamond shaped pommel Both blades yellow in color.
@WildmanTrading
@WildmanTrading 3 месяца назад
I would like a ligthsaber with a really long blade to be used as cavalry Lance, and another that with a shorter but still long blade to be used as a fencing sword.
@marshalllatta2073
@marshalllatta2073 2 года назад
Lightsaber crystals are so beautiful and cool
@matsverschoren77
@matsverschoren77 Год назад
I always loved the idea of having two lightsabers that you could connect to make a double-bladed lightsaber design. I would also like to be able to adjust the length of one of the blades. The hilt itself would be made of a lightsaber-resistant material like beskar but maybe some leather on it to make it more comfortable. The color of the blade would be purple because I would mainly use the light side of the force but sometimes the dark side.
@toptiergaming6900
@toptiergaming6900 Год назад
Thats why I like ventresses sabers alot because she can disconnect and reconnect them (shame we only see it once).
@FD-wl7xq
@FD-wl7xq Год назад
In star wars fallen order the mc has a light saber that can go single,double and duel wield
@valentineX1X
@valentineX1X Год назад
Wrist mounted light sabers on both arms blacked out to be concealed under robes. Using black wing crystals amplified with amplification crystals. The idea would be to assassinate enemies but be able to overwhelm them if the initial attack failed. This also gives the option to use my hands freely as needed. They would be used mostly like punch daggers with the the off hand focused on parrying and defence.
@thelastprime4978
@thelastprime4978 2 года назад
In my opinion legends is superior to cannon in many ways but there are some things that canon does better personally I prefer the canon way of choosing a lightsaber as it helps the crystal be more attuned to their specific user and even more unique
@Top_Cheeze
@Top_Cheeze Год назад
Legends have that too and its even mentioned in the video, all new canon did was pick one of the options in legend and made that the only option, making the entire world feel more static and incomplete in the process, as if there are no mysteries to find or alternative ways to do things like there always is in the real world we live in
@thelastprime4978
@thelastprime4978 Год назад
Canon is relatively underdeveloped and Dave filoni has been known to bring legends lore back into canon so who knows maybe some of the older ways to get a lightsaber crystal will come back into canon
@skyh1gh973
@skyh1gh973 Год назад
Just one question, what is legends, i know it’s a alternative lore and timeline but how can I read/watch it and is there a place where I should start reading/watching it and should I read/watch them in chronological order if there is one?
@lkuhhdsfgasdgvdadfg
@lkuhhdsfgasdgvdadfg Год назад
Disney stuff is fan fiction. Not cannkn
@jordanatkins5748
@jordanatkins5748 2 года назад
My ideal lightsaber design would be single bladed with a prong or hook at the end of the emitter. The colour scheme would be dark grey with bits of silver and gold. There would be a clip at the bottom of the hilt so that it could attach to a belt. There would be a switch to ignite the saber instead of a button. I would use a meditation crystal to help me in battle. And finally I would want the colouring of the blade to be yellow or red (you decide).
@melissagumm8604
@melissagumm8604 2 года назад
Yellow
@toughluck9403
@toughluck9403 2 года назад
I agree
@pipsqeak7104
@pipsqeak7104 Год назад
I have decided. Yellow
@rhfkli1323
@rhfkli1323 Год назад
My ideal lightsaber would be a cyberpunk style unstable peacemaker lightsaber with some mandalorian like ornaments and there should be some wood or leather elements in the handel. I would use a lava and heart of the guardian Crystal.
@ash.l2175
@ash.l2175 Год назад
Interesting video lots of good information that I was not aware of till now. Also love the use of edga hopp.
@maxsaranac9169
@maxsaranac9169 2 года назад
My ideal lightsaber design would be a purple crystal with a cross guard hilt, with the guards on an angle upwards. I also really like the idea from Ezra bridger’s lightsaber with a stun blaster attached.
@thecolt45a
@thecolt45a 2 года назад
That stun blaster is clutch I'm surprised more people didn't do something similar
@calmsquirrel7124
@calmsquirrel7124 2 года назад
So uncivilised
@drake2561
@drake2561 2 года назад
@@thecolt45a if I added that to my design it would become even more overengineered... crystal swapper, angle adjustment, augmentation crystal, phase shifter, twin blades/double bladed, made out of lightsaber proof material... It would be more likely to blow up than a bomb...
@zarris3986
@zarris3986 2 года назад
@@drake2561 so cortosis
@Proygon
@Proygon 2 года назад
I have a video suggestion: what each blaster bolt colour means it hasn't been covered nearly as much as lightsaber colours, but there does seem to be some kind of meaning, and I would be very interested in it also, my ideal lightsaber would be a single-bladed, dual phase lightsaber with a longer than standard hilt, almost the length of a standard double-bladed lightsaber. It would use both a Kohlen crystal, and a Lorrdian gemstone, as both of these are my favourite, especially the Kohlen crystal, partially because I like the colour orange. the Lorrdian gem would also help me understand others' moods and body language, as I have a lot of trouble with that usually
@kakyointhedonut7369
@kakyointhedonut7369 Год назад
Blaster bolt colors are just what gases are used in it where red is super low quality and green is super high quality
@timusmaximus6794
@timusmaximus6794 Год назад
My saber of preference would be designed with practicality in mind. The hilt being shaped to the wielder's hands and fighting style. Personally, I would go for a slightly curved hilt, which could help my capabilities in duelling. The style of this hilt would me similar to the VF sabers "The Terra" but with a little bit of dark blue mixed in. Furthermore, a beskar crossguard would be fixed to the hilt, blocking enemy sabers from cutting off my hand during bladelock. As for a crystal I would choose a focus crystal. The increased clarity this would give me would help my duelling and force capabilities.
@randompigeon4183
@randompigeon4183 Год назад
My ideal lightsaber would have a deep unstable green blade with a black hilt with slightly darker gold highlights. It is slightly damaged but “fixed” with cloth wrapping around it. The hilt would have small metal teeth surrounding the smaller blade output while the main blade has 2 larger blades on opposite sides. A bescar or lightsaber resistant material like one of the grand inquisitor blades but with only one semicircle. The back of the lightsaber has a much smaller blade for use as a dagger. The wielded would gain higher reflexes, giving them a higher connection to the force. I think that’s it and btw, I love your content, it is so amazing and factual! Thankyou!!!
@efritz4750
@efritz4750 2 года назад
I think my ideal lightsaber design would be one with a curved handle, and designed with several energy crystals. The extra crystals would serve to alternate from the standard blade to the blade of a light whip. This would be a very versatile design, as it could use the aggressive and unpredictable attacks of the light whip, but still keep the defensive capabilities of the standard blade. As for the color I’d go with purple, as the blade leans toward more aggressive dark side techniques (and just because it’s my favorite color).
@Jagger-Tyr_13
@Jagger-Tyr_13 2 года назад
That honestly sounds pretty sick 😄 Gives me Ivy from Soul Calibur vibes. Or even Renji Abarai from Bleach.
@scratchd0g
@scratchd0g 2 года назад
you'll take your eye out, kid.
@thecontrollerofbots4099
@thecontrollerofbots4099 Год назад
@@scratchd0g either your 75 or your assuming that their a kid
@wcapewell3089
@wcapewell3089 2 года назад
My ideal lightsaber would be something similar to the darksaber, but in a crossguard form. It would contain a hurrican crystal like that of mace windu (but cracked), along with a blackwing crystal. The blade itself would have a black core, with a crackling purple outer colour. The hilt would have elements of electrum and beskar, along with a banes heart crystal on the end of the pummel.
@astralmagic3548
@astralmagic3548 Год назад
I thought about my ideal lightsaber about a month ago. I really like the idea of extendable hilt. You can switch fight form in the middle of the duel to surprise your opponent. For example: you fight someone with usual length hilt. But then you suddenly extend it to a longer one! Your hits become more powerful, and your opponent is stunned! And about color - I think green matches me well, because I'm too kind :)
@Abyssiondubs
@Abyssiondubs Год назад
Thank you for making this good sir! Amazing work. Got my SWTOR nostalgia going 😂🙏
@noah_weyandt9
@noah_weyandt9 2 года назад
My ideal lightsaber would actually be two different parts. First I would have a normal straight handle with a permafrost crystal. It would have a straight blade from the top and then it would have two vents that pointed away from the handle and towards the blade but at an angle. This blade would be green repersentingredients my connection to the spiritual part of the force. The second part would be a lightsaber gauntlet with two gold/yellow blades on the left and right side. The gold/yellow representing the high level of my force connection and the position of my family in the jedi. The gauntlet would also have a balster in the middle of the blades for tactical and ranged attacks like how Ezrans saber had a ranged attack.
@The-Blue-Knight
@The-Blue-Knight 2 года назад
My ideal lightsaber would be all orange. Some sort of metallic orange exterior like a copper look. Simple smooth and half dome top. Orange single blade. I love orange. As for the crystal itself I would want either the one that increases healing potential or the ion shock one as I would fight clankers along side clone troopers. Maybe even the 1st crystal as I would never want to kill anyone but rather stun targets. Or maybe even the orange crystal that turns off if not fully devoted to the light. I would never stray from the light and that crystal would be my perfect reminder and resemble myself. I would want to heal my clone allies 1st and scrap clankers 2nd. Would love to fight with the 212th along side Cody.
@The_Moe_Szyslak_Exp_feat_Homer
Pretty much my own exact preference.
@The-Blue-Knight
@The-Blue-Knight Год назад
@@The_Moe_Szyslak_Exp_feat_Homer Nice!
@monkael1438
@monkael1438 Год назад
i like orang
@The-Blue-Knight
@The-Blue-Knight Год назад
@@monkael1438 Awesome!
@reidgleason8590
@reidgleason8590 Год назад
another good crystal would be the solari crystal at 18:21
@antwan1357
@antwan1357 Год назад
very relaxing n informative thanks
@jhonylg4045
@jhonylg4045 Год назад
Hi mate thanks this is an stonishing video full packed of info. i love it! I would love to know more about those Dathomir Witches!
@benkenobi8602
@benkenobi8602 2 года назад
Mine would be a green lightsaber with a gold and black hilt
@stormhawkdude
@stormhawkdude 2 года назад
Easy; curved handle like Tyrannus's with one extra emitter out front as a knuckle guard like Kylo's. For style probably a mixture, using FO as a guide for naming convention; "Mygeeto" for the Prime Emitter and "Umbaran" for secondary, "Valor and Wisdom" for the Switch, and either "Passion and Strength II" or "Duty and Resolve" for the Body. Color could be whatever; Guardian, Consular, Sentinel, Purified, Purple.
@user-gh4zh3wq2u
@user-gh4zh3wq2u 4 месяца назад
Lightsabers are some of the most iconic weapons in movies and TV shows for sure
@agerothn
@agerothn Год назад
My saber would be a pair of hinged, double bladed lightsabers using Mantle of the Force and Permafrost crystals for a cyan/blue blade effect, assuming multiples of these crystals can be found. The hilts would be made of Laminar steel, following a design similar to the ones used by the Jedi Guardians, maybe a bit longer, but with a bit of an ovoid-like emitter shroud, rather than straight. For aesthetics, the sections that would not be held in the users hands would be covered over with a casing made of something akin to a resin sphere (real world material) poured to look like a nebula with stars.
@fredfullthedreadful
@fredfullthedreadful 2 года назад
My ideal lightsaber would be a curved hilt dual phase lightsaber with a yellow blade using a rubat and a lignan crystal to allow for pinpoint accuracy, a good distance from your opponent, and a guarantee to cut through whatever armor, shield or cover they possess. The lignan crystal would of course also help for all my force alchemy/experiment needs. The hilt would be made of doonium to make sure that the lightsaber would be durable and wouldn’t break due to the extreme heat of the blade. The look of the hilt would preferably be black and silver with an elegant zigzag pattern and have ancient symbols and texts on some of the black parts of the hilt. The emitter would have two spikes like Dooku’s lightsaber, but on both sides of the emitter and the one on the same side as the curve would preferably be longer.
@an1mosity_
@an1mosity_ 2 года назад
My ideal Lightsabers are a dual wielded set catering to a 4th form user, both would harness Ruback Crystals as to increase speed and agility, making movement and acrobatics of the 4th form faster, leaving less weak spots in the defense and prioritizing time on the offensive. Both handles would be relatively shorter, as would the blades to allow for easier control. They would have similar colour schemes, mainly black with many silver highlights, as well as both have a leather wrap around the handle for increased grip. The saber used mainly in the right hand would take a great deal of inspiration from SaberForge's "Cleric: Wrapped" Design, while the left handed saber would be more like Starkiller's blue lightsabers. Both blades would be a deep crimson to go along with the dark side affiliation, however the colours were originally blue and green, except corrupted with the turn from light to dark.
@judewells3983
@judewells3983 Год назад
My ideal saber is like a lightside version of count dokus saber. Its main color is matte white with gold accents, a similar color scheme to the jedi temple guardians . It's emitter is like joro tapals if it was a little shorter and cut in half vertically and has a small sliver of metal of the opposing side like count dokus. Its a dual phase lightsaber with a cyan blue blade.
@judewells3983
@judewells3983 Год назад
Damn now I'm looking through these comment and I don't feel very original anymore curved hilts are popular but this is still my preferred lightsaber
@Dsturb85
@Dsturb85 Год назад
Check out the new miniseries tales from the Jedi you see Count Dooku with a blue lightsaber while he's still a Jedi
@purpleblossom3837
@purpleblossom3837 Год назад
May be late but I have a pretty cool lightsaber idea. Basically it looks like your normal doubladed lightsaber (like Darth Maul's) but it has a twist, it can turn into a dual bladed lightsaber (like Ahsoka Tano's) when the user grabs the hilt when it's a double bladed hilt in a criss cross grip (right hand on left side, left hand on right side) then turning the separate hilts half way counterclockwise in a quick manner then fully clockwise which releases the single hilt into two hilts. This is possible with this lightsaber because of the fact that this saber has two kyber crystals that are connected by a very powerful magnet that allows the two kyber crystals to join into one. Users of this saber use Jar'Kai and the option of using form Shien when the single hilt becomes two separate hilts. I can't think of good name for this saber but for now it's the "Triple-Use Saber" hence the two separate hilts and the additional Shien form.
@space1546
@space1546 2 года назад
My ideal lightsaber would be an almost light-halberd that can also function as a dual or single bladed lightsaber by using a retractable lightsbader resistant rod between two hilts so that you could pull them apart from eachother and have the second blade go inward. I'd like the far blade to be black to allow for it to be shaped similar to a halberd as well to allow for holding my opponents blade at a distance while also being able to stab at them. By being able to seperate the hilts, it would also minimize the area in which the saber could be hit and take damage. It would have the benefits of leverage and surprise of a double bladed lightsaber in halberd form as well, but with significant more defense. Having two large blades would also allow for incredibly effective blocking of blaster bolts. Both hilts would have the hand guards of a real-life saber more to prevent the slipping of the hand onto the blade than to protect from an outside force, however. The second, internal, blade would likely be yellow or orange, both because I personally consider myself on the inventive side which is often symbolized by yellow but also the yellow and orange are cooler and subsequently put less stress on the internal rod. As for the material of the hilt itself, I'd like it to be a blaster-resistant material to allow it to be effectively used as a shield from blasters when spun with the force. A simple durasteel alloy would probably work, giving it a dark color, though I'd like a leather grip, perhaps made from zillobeast hide, to make it nicer to hold without compromising it's durability. The hand guards, however, would likely be made of a lightsaber-resistant material, perhaps an electrum alloy to match the yellow blade.
@space1546
@space1546 2 года назад
@10K Tezla don't worry, I significantly doubt that he'll even see mine lol
@Cody238
@Cody238 2 года назад
My ideal lightsabers would be a pair of sabers with a standard sized main saber and a smaller shoto saber. Thematically, I would want to maintain design consistency between them while playing into the asymmetry. I like the sith style emitter spikes, probably 4 short prongs on the larger saber and 3 on the smaller one. I like the contrast of brushed metal hilts with smooth black grips and detailing. I like the basic small red button activator. I am a big fan of the crystal housing on the Vindicator's Saber from SWTOR where the crystal is encased by the hilt but slightly exposed adding a glow to the hilt when the blade is active. I would want to have a more simple pommel to keep the crystal housing and emitter spikes as the main focal points. I would want to use a viridian colored rubat crystal in the shoto to double down on the shoto's strengths as a swift counterattack weapon. I would want to use a violet colored damind crystal for the main saber to enhance its defensive capabilities and keep consistent with the theme of focusing on blocking and retaliating.
@savagesalgaming5180
@savagesalgaming5180 Год назад
My ideal lightsaber would be a double bladed one that didn't have to many knobs or buttons so it would be easy to swing and could also break apart and allow me to weild it like Ahsoka does. The color would be be a flame blade or unstable royal blue. I would use a Danderi Krystal because I think that it would be OP to recycle your force energy and while your opponent can't use the force, you can. If not that Krystal, than the Katak Krystal, because it would be OP to train your opponents abilities and then from there you can use the force and they can't.
@arthurwiebusch9292
@arthurwiebusch9292 Год назад
Nice quality dude, no repeating images, the video is perfect Some SW channels are pretty lazy, they repeat the same image sequence over and over... I almost sleep while watching them!
@theofraemohs8936
@theofraemohs8936 2 года назад
My lightsabers would be a yellow double bladed but able to turn to a dual wielded with options to turn the blade into a shotto or even longer with a cracked rubak or ghost fire Christal so I have a cross guard
@idontevenknow4614
@idontevenknow4614 2 года назад
my ideal lightsaber is one that has an emitter that kind of goes up and around the blade, like darth malgus but less extreme, or the magus emitter from jedi fallen order. whenever i customize a lightsaber i always have an emitter like that and some gold around the switch, but leave it silver twords the bottom. and i always make it purple because i believe if the force was real i would utilize both jedi and sith teachings.
@relaxingvideos950
@relaxingvideos950 Год назад
My ideal Saber, would be a cross guard design. The main Hilt would be made Chromium with Gold Details. No blade would come out of the cross guard sides as it would be made of solid Cortosis (if you know, you know) the main blade of the saber would be around 28cm in length, inside the chassis would house The Allya’s Redemption Crystal.
@zackdeberry6529
@zackdeberry6529 Год назад
I just found this channel wish I found it months ago Keep on doing what you're doing.
@VadersFortress2
@VadersFortress2 Год назад
Thanks man 😊
@austinbeshuk3022
@austinbeshuk3022 2 года назад
my ideal saber is a cross from dookus and mauls. the industrial look, buttons, and lines and emitter point of maul with alternating square raised edges at the tip (like the wall of a castle, or the top of a rook) and gaps in the cylinder to show off the blade a bit, and with the curve, and graceful design and hilt colors of dookus, silver/chrome as opposed to grey. also, the striated grip on the inside of the curve like Qui-gon's saber, that seems comfortable. id have a genrox crystal for the added agility, and a white blade, symbolism and stories of healing and restoration are important to me. Also im a fan of the "grey" force users.
@squilliampills9851
@squilliampills9851 2 года назад
LightSabre idea: 2 small dagger like weapons similar in design to the darksabre, but both sides are angled at about 20 degrees. They would also possess a clear blade due to them having Ghostfire crystals. They would also be able to be mounted to blasters as bayonets.
@flare69420
@flare69420 2 года назад
Light dagger
@megazale5783
@megazale5783 Год назад
My ideal saber would honestly be a scythe with a white curved blade as I see my self like Asoka. The hilt/staff would have a nice gentle curve and would be made out of Damascus with wooden inlays spiraling up the hilt, and have platinum rivets along the edge of the blade base! This video was so awesome to watch! Haha!
@Agent_A_Graham
@Agent_A_Graham Год назад
My ideal lightsaber is one of the classic light blue blade. Has a thin blade like the Ralph McQuarrie art and Rebels show. The thin blade matters because the lightsaber is basically the ultimate sword that can be used in a variety of directions, and since it is also based around the samurai, the thin blade matches the thin end of a sharp katana in all directions. My hilt would be similar to Kyle Katarn's hilt. A classic, nostalgic hilt. My lightsaber would also have the ability to only turn on when it senses that I am truly in danger, preventing me from overusing my lightsaber for any reason. So my mastery of my lightsaber is also on how much I use it. It will be my secondary weapon. My primary for most confrontations will be my wooden staff made from the Kashyyk trees. Self-control and pacifism is the way of a Jedi. And this ideal keeps the mysterious appeal of the Jedi strong because they should only use their lightsabers when truly necessary.
@flying1dead155
@flying1dead155 Год назад
I'll take my good Ole bryar pistol modified to fire concussion rounds 😂.
@guerillagorilla4423
@guerillagorilla4423 10 месяцев назад
The buckshot I am about to shoot in your direction:
@hyrumkeith8467
@hyrumkeith8467 Год назад
One of the best for me would be Brylark wood casing. Holding bifurcating cyclical-ignition pulse technology (under water use requires two crystals). Along with A99 Aquata Breather away from the blade (breathing underwater). Stygium crystal (force stealth/invisibility) and Ankarres Saphire (strengthens lightside and force healing). Almost clear-blue in color. Hermit healer/jedi near a clear lake. Missions for the jedi when they need a healer or spy. Remaining invisible or disappearing or using soresu to defend/survive.
@SAGITTARlUS
@SAGITTARlUS 2 года назад
I think my ideal design would be something like this: Crystal choice: a dual bladed, short hilt saber (similair in lenght to exar kun's saber) with the Kaiburr crystal in one end and a functioning ghostfire crystal in the other. I'll mainly use the Kaiburr crystal since this will amplify my force powers. But for stealth missions or sneaky kills during hard fights I will use the ghostfire crystal as this emits no light or sound. Real sneaky stuff. Hilt design: I'm picturing a slim oval design with a slight curve at the end where the ghostfire crystal is. However, running level with the level part of the hilt, I'd put a small blade made out of beskar on the bottom. The beskar blade would be rather small, so as to not overpower the rest of the design and take focus away from the rest of the saber. I'm picturing around 13cm in lenght, and 2,5cm in width. Between the beskar blade and the curved end of the hilt (I would hollow out a part of the hilt to make room for the blade itself), the ghostfire crystal would have ample space to emit its silent beam of destruction. Altough I've taken some inspiration from Exar Kun's saber, I wouldn't use much of his design beyond the lenght of the hilt itself and a similair "crown" I guess, at the tip of the blade. Right where the hilt ends and where the lightsaber begins. I would only put a "crown" on one side, (the side where the Kaiburr crystal is) making it look like I'm using a single bladed lightsaber. (I want the element of suprise on my side in case things doesnt go my way) Further, I'd go with a beskar fundation, protecting the core, crystals and vital parts of the saber. In this way it would still work fine even if the hilt takes a hit. Now ofc a pure beskar hilt would be either comfortable to hold, or pretty to look at, so I'd do a couple of more things with it. I'd mainly use wood for the handle, something from kashyyyk I think. With hints of a rubber like substanse for extra grip in crutial places. Color: The ghostfire crystal is invisible so, well, no color needed there. My ideal lightsaber color for the crystal thats able to emit light and color would be purple as this fits nicely with both my fighting style and overall personality. Altough I'm not sure its possible with the crystal I've chosen. But the crystal and its power is worth even a brown color. The wood on the hilt would be dark, and the rest of the hilt would be matte black. As would the beskar blade on the hilt be. The crown on the tip of the blade would also be black, but on the inside I'd put a gradient from black to whatever color the blade itself is. Summary: A dual bladed saber with a short hilt. With the Ghostfire and Kaiburr crystal for my crystal choice. Id design the blade in such a way that it appears as a single bladed saber. A "crown" would be placed on the end of my main side, further hiding the fact that its a dual bladed saber. The hilt would be slightly curved at the bottom, and I would hollow out a piece of the hilt to make place for the ghostfire blade. I'd also put a small beskar blade, around 13cm in length on the bottom of the hilt. In such a way that the ghostfire blade would be emitted out between the hilt and beskar blade. The color theme would be dark. With dark wood on the hilt, and matte black everywhere else. ("Crown", beskar blade, on/off switch, etc) My ideal color for the visible blade would be purple. Sorry for the long post, and any mistakes in either grammar or spelling. English isnt my native language.
@Jagger-Tyr_13
@Jagger-Tyr_13 2 года назад
Well, if anyone deserves a lightsaber, it's this person right here. You know what you want and honestly put a lot of thought into your dream-saber. Best of luck to you man 👍
@SAGITTARlUS
@SAGITTARlUS 2 года назад
@@Jagger-Tyr_13 ah, man thank you for the kind words. I did indeed put alot of work into it. Been thinking about my ideal lightsaber design for years now. Glad I finally found a reason to share it
@qu3rcus173
@qu3rcus173 2 года назад
i spent a while thinking and my comment is shorter than this persons conclusion. You wrote an entire thesis on a lightsaber design in a second language. You deserve a medal along with that lightsaber.
@SAGITTARlUS
@SAGITTARlUS 2 года назад
@@qu3rcus173 thank you so much for the kind words. Best of luck to you mate. I hope you win!
@liamterpenes2288
@liamterpenes2288 2 года назад
My Ideal Lightsaber would be a dual-phase lightsaber with a longer-than-average hilt. The hilt would be made out of Gimmer wood and would have burnished copper lines that form a vine-like pattern growing down the hilt. My first crystal would be a Pontite crystal for its calming aura. This calming aura would help fights end before the violence began and would be perfect to defend innocents. The second crystal would be a Lorridian gemstone. Its boost in reading body language would be perfect for a practitioner of Soresu. Lastly, the color of the blade would be green to show my dedication to diplomacy, peace, and the Force.
@Qaswrdx
@Qaswrdx Год назад
My ideal lightsaber would be very similar in design to that of the Jedi temple guards, while using a cracked Krayt Dragon pearl utilizing a cross guard for ventilation as well as being a dual phase style for adjustable length with the Heart of the guardian as my secondary crystal. Orange as the blade color. Construction would be beskar with brass colored portions for all the controls and on the ribbing on the grip area. Loved the video, excited to see more of what you make 😎
@lobolopez7746
@lobolopez7746 Год назад
This video that I can watch over and over
@monkeboy6561
@monkeboy6561 2 года назад
Most people would say that there lightsaber color would be yellow or purple, but really most of them would just get blue or green.
@antonhrlyck5002
@antonhrlyck5002 2 года назад
My ideal lightsaber has a silver and black handel, with a blazing red blade featuring an adegan crystal. I have always wanted a good quality lightsaber with a metal handel and good LED. I have even thought about paying over 300 dollars, but I just couldn't afford it. The blade that really has me inspired is Count Dokus lightsaber, with its cool handel.
@dreadqueenpersephone5355
@dreadqueenpersephone5355 Год назад
My personal saber design is a crossguard with a rotation function that allows you to slip around another blade in a saber-lock, length adjusters on each blade, & the ability to attach a secondary saber at the base, allowing for dual-bladed saber combat. When exposed, the base of the primary lightsaber has an extremely thin blade emitter, allowing for extremely long range cuts as a last resort of sorts. My crystal system would be a trifurcating cyclical-ignition pulse, allowing for underwater & vacuum ignition, through use of 3 separate primary crystals. My first primary would be a Krayt Dragon Pearl, with my second primary being the Heart of The Guardian. The final primary crystal would be the Mantle of The Force. My primary focusing crystal would be a Katak crystal, and the secondary focusing crystal would be the Ghostfire crystal. The casing itself would be constructed out of a Beskar-Phrik alloy, as it would need such heat resistance not to melt upon ignition.
@harrisonbraun4499
@harrisonbraun4499 Год назад
I've always had a soft spot for Palpatine's lightsabers and how they were just a spiteful middle finger to the Jedi. They were small in size and allowed for very accurate swings and parries using minute movements of the short hilt. The VR game Blade and Sorcery has a really cool star wars mod called The Outer Rim where one of the core aspects is lightsaber creation, and I created a secondary mod granting a wide array of colored lightsaber crystals. From this I found my favored lightsaber color, a very light and bright icy blue from the permafrost crystals of Hoth. The hilt itself would be simple, coated in silvery doonium-dolovite alloy, which would give the small hilt a reddish sheen. Doonium is quite heavy, making the lightsaber tough to master, but would be satisfying to learn to use and would train me to use long fluid strikes using the inertia of the blade, so I'd most likely prioritize form I. The emitter would be flat, adding to the minimalist design of the hilt itself, the whole hilt being around 7 inches in length.
@CookieDragon-sr8yw
@CookieDragon-sr8yw Год назад
Palpatine: Haha mini-saber go bjjjjaoowwww.
@masterobikenobi1288
@masterobikenobi1288 2 года назад
I have thought of buying a lightsaber for quite some time now but i havn't desided which one yet. So my ideal lightsaber would be with a curved hilt somewhat like Ahsoka's new lightsabers. I'd have the heart of the guardian crystal built in my lightsaber. My hilt would also have a beautiful damascus pattern etched into it. But I know that i would choose a blade in red couloration. Not because I would be a sith but because it looks at least 10 times cooler.
@masterobikenobi1288
@masterobikenobi1288 2 года назад
And btw can you get the lighsaber in ecopixel instead of smooth swing if you win the giveaway?
@terrivel11
@terrivel11 2 года назад
I really like the ideas they ran with in Fallen Order. Two sabers that can be connected, one standard, one (To my memory) shoto. You could make one or either dual-phase for extra versatility, though that is a bunch of extra frills.
@zecos115
@zecos115 Год назад
All of these light saber designs in the comments are really cool and I’d love to see them irl or in like a drawing or picture. Maybe a website someone could create or has created that has all of the hilt, switches, emitters, colors and crystals, and materials that’s in legends and cannon
@trippinballs101
@trippinballs101 Год назад
I knew you would miss the most mystical saber, the SOUL SABER, literally held a dark nexus within-worshipped by the sith. Unknown how it was created said to have come from a dark dimension, from where darkside originate. But to be fair I dont know if it has a crystal or is powered by the nexus itself. The lore behind it is touch and go!
@soopakoopa6461
@soopakoopa6461 2 года назад
My ideal lightsaber design would be something that looks like a normal saber staff on the outside, but incorporates the customizable blade length certain sabers had in Legends to allow it's user to wield it like a proper quarter staff without the weakness of a long, easily-cuttable pole that a saber pike has.
@SoApost
@SoApost Год назад
Ah, yes. The variable blade length lightsaber was the survivalist jedi's essential weapon. The customizable length easily allowed the jedi to switch from slicing chicken and chopping vegetables for lunch or chopping wood for the campfire to ridding sith scum from the galaxy all in one easy-to-carry hilt!
@Bridgerpoops
@Bridgerpoops 2 года назад
My delight the Sabres I'm probably look like it would have Anakin switch from his second lightsaber and have a power evolve on it 2 Change how much power is coming out of the hilt to alter the blade type it would be mostly black red and grey and have a water cooling system with an orange crystal
@trn9939
@trn9939 Год назад
A long handled beskar saber. A formidable club without the blade on, allowing for less deadly forms of conflict resolution. It also serves to block lightsaber strikes.
@chancestraus4482
@chancestraus4482 Год назад
I love the obi wan Kenobi lightsaber design personally it’s just so timeless and complex at the same time, just beautiful
@shiney1066
@shiney1066 2 года назад
my ideal lightsaber is a black hilt, purple lightsaber and the emmitter would be similat to obi wan's and luke's ( quite skinny) and then the hilt itself would be quite sleek and agile
@joshuagerrardtan508
@joshuagerrardtan508 2 года назад
My ideal lightsaber would be with red wrappings on black metal and the Sappith crystal with a red dual phase blade and the emitter would be sort of spiked, and also some silver lining. I would probably use lightsaber form 2 and 5
@bluyu
@bluyu Год назад
My ideal lightsaber design would utilize a core comprising of multiple crystals. The central crystal would be a Kaiburr crystal. On one side, there is a grooved slice of Hurrikaine crystal around a Ghostfire crystal in the middle, and on the other side, a grooved Loidian gem slice with a Pontite crystal in the middle. The entire thing would be encased in a layer of AMP crystal tipped with a Mantle of the Force crystal and a Heart of the Guardian crystal on either side, as focal points. All of these crystals would be small in order to fit within a single lightsaber hilt, but the use of different crystals with amplifying capabilities would more than make up for it. As a result, the lightsaber grants increased force potential, speed, stealth, offense, defense, and clarity of mind. The blade would be slightly transparent and dimmer than normal, cold (due to the Pontite crystal), produce illusory effects, and have a whitish hue with a slight tint on the bluer side. The hilt would be forged from a hyper-alloy made up of Phrik alloy, Beskar alloy, and Quantum Crystalline alloy. The inner chamber housing the hybrid crystal would be made from modified/reverse-engineered Cortosis Weave, which would utilize an internal mechanism to cancel out any energy field that forcibly deactivates the lightsaber, such as normal Cortosis Weave armor itself. The hilt also feature a dual-stance/mode-shifting design, utilizing flexible interior joints to allow for both a curved hilt and a straight hilt. The hilt can also be locked or unlocked, so that lightsaber can either flex and bend or remain steady and firm during combat. It would also be dual-phase, allowing for varying lengths. The lightsaber would require high mastery of both the force and many different styles of combat to use to its full effectiveness, given the many things that it can do, but the difficulty barrier is overcome, the user should be able to deal with virtually any situation with ease.
@samward3115
@samward3115 Год назад
For me I would have a duel bladed lightsaber pike with a detachable center and each saber having a retractable pike for portability. It would also be good to have an extendable blade with 4 crystals for underwater combat and the retractable function. A basic silver design would be good maybe with some gold rings. A staff would be good for me because I'm not the best with a sword especially compared to a staff.
@nicolast62002
@nicolast62002 Год назад
My ideal lightsaber would be a standard single bladed hilt made out of corundum metal w/ a crown emitter. I like the idea of a more simplified middle grip, so not many buttons & knobs. As for the color, I've always seen the benefits of embracing all aspects of force both light & dark side so the white blade of a grey jedi sounds cool. I don't think this can be achieved with a standard lightsaber but I've always liked the low buzz of Pong Krell's lightclubs. Finally, after learning about the meditation crystals from this video it sounds like something that would be very useful for staying connected to the force and keeping a clear mind during battle. (doubt this'll win but had fun learning & designing)
@isaacmcfarland431
@isaacmcfarland431 2 года назад
My ideal lightsaber would be a double bladed that comes apart,but also can provide a energy shield and can change length and also shoot energy blasts. It would have a sharp end at the base to use as a knife just in case it doesn’t work. Last it would be made out of zillo beast scales with a gray blade deeply connected to the force
@ked49
@ked49 2 года назад
That is actually what I was thinking except mine would use a ghost-fire crystal. That way I could be stealthy
@isaacmcfarland431
@isaacmcfarland431 2 года назад
Noice
@Control_Z.
@Control_Z. Год назад
Summary! Color: crimson orange Hilt type: adjustable blade size dual bladed ( cross guard hilt on one side ) Nerdy details ! I’d say my ideal saber would be a warm crimson orange double bladed cross guard pike style saber. ( one side has the cross guard and the hilt is slightly larger than the other sabers hilt ) The cross guard part as well as the main blades would be adjustable, allowing me to make a longer or shorter saber and cross guard to make different types of “ poll arm like sabers “ . In case of close quarters fighting the longer hilt can be disconnected and separated for a more compact yet slightly longer sized hilt saber and the extra saber could be clipped to the belt or used in unison. Had fun with this one :D
@gan5045
@gan5045 Год назад
On my brushed embellished silver temple guard staff with rubber grips and 2 detachable 24" yellow rounded tip combat ready blades I would use an Ankari Saphire to be sure my saber was never misused and to enhance force healing. I love to switch from staff to dual blades or even run one blade using both handles to create more impact. It also makes a handy non-lethal baton with no saber activated.
@gdsupreme5040
@gdsupreme5040 2 года назад
My ideal lightsaber would be a saber staff, able to split apart into two sabers. The hilts would be made out of phrik alloy, with beskar highlights for detail, similar to a damascus pattern that is used to forge actual weapons. The crystal chamber would be removable, allowing for crystals to be interchanged on each saber. I would switch between two crystals. The first would emit a white lightsaber blade, purifying a bled crystal symbolizing the defeat if a great enemy. This also in turn gives affinity to a grey, rather than purely a jedi or sith, giving the force control over destiny. The second crystal, if allowable, would be the ghost crystal, emitting the invisible blade. This would allow for the most devastating attacks on my opponents while dueling. I'm also assuming I would be skilled enough to weild it properly. The emitter would have 3 windows to allow the color to shine through, and be capped with gold etching. The pommel would be ornate, but still able to connect to a staff. The outer layer would be wood, covering the alloy and beskar, allowing for a beautiful finish and comfortable hold, but still being merely decorative and keeping the durability intact. Finally, for the etching inside the wood, I would use the polish that windy and dooku used to make it extra sleek. This would be my ideal lightsaber.
@minicle426
@minicle426 2 года назад
Ghostfire is my favourite. I want that onscreen one day.
@jennyada1429
@jennyada1429 2 года назад
If I had to choose a second crystal it would totally be ghostfire! It would go so well with the more common stygium crystal but being invisible and having a ghostfire blade just seemed too op for me :p
@eytangoldstein898
@eytangoldstein898 Год назад
A lightsaber design that I’ve been thinking of for a while are 2 separate lightsabers with curved hilts that can reform to a regular hilt and in can have their ends connect to create a double bladed lightsaber. All this so that I can have the most convenient lightsaber for any situation and have all of the pros of most lightsabers. One would be orange and one would be white. The primary material of the hilts would be the teeth of the krayt dragon with the sliver lining and buttons.
@evanartist8060
@evanartist8060 Год назад
Before describing I just wanna say great video! Very informative! So for my ideal Lightsaber, it would go hand-in-hand with a defensive and endurance based style. The hilt would be a cross guard type, with two small vents protruding at 45 degrees angled upward near the blade to produce somewhat skinner blades. The main point of these would, of course, be for clashes with opponents, as it would protect my hands, but also maybe strike the adversary with the smaller blades if possible. I would embed it with a Meditation Crystal for both its relaxing qualities due to being able to connect easily to the Force, and it’s ability to restore energy to the user upon striking the opponent. Defense, Focus, and Restorative properties would work great in tandem with each other in this blade, allowing the user to survive incredibly long in a fight. As for some of the more specific aspects of the blade, the hilt would mainly consist of a dull silver metal separated into a few panels with some underlying black and bronze details that would be hard to notice on the first glance. The previously mentioned small vents that create the cross guard would be a bit of an outlier with the rest of the hilt with them being entirely bronze colored. The somewhat boring/plain color scheme is meant for a practical use, as Jedi and Sith alike have shown they’d need to travel to locations without others knowing who they are, but still keep their Lightsabers on them. The colors of my hilt are meant to more easily be hidden in plain sight, blending in with certain types of robes or armor that could be used in a disguise. It’s meant to be a tad unassuming. I should also mention that the very bottom of the hilt is entirely flat, with the main idea of it being able to strike an opponent and render them unconscious in the case I don’t want to kill them, they don’t want to talk, and I don’t have any way to stun them at that moment. Finally, the blade itself. I would wish to use a yellow blade, though since we’re not 100% sure what causes a yellow Lightsaber, I would go with the logic that it is because of my own strong conviction and resolve towards my own beliefs and sense of justice, deciding what I believe to be right and wrong while still following the Light and attempting to keep balance within myself. I hope this is sufficient! I’m still a little new to the fandom overall but I hope others enjoyed learning what would be my ideal Lightsaber.
@loonylunaticmaxhammer3401
@loonylunaticmaxhammer3401 Год назад
gay
@flowey1
@flowey1 Год назад
my ideal saber would probably be red-bladed, with a slim and not TOO long hilt, and some details on the buttons, pommel, etc. Not too much of a complex design but still a cool one imo!
@reidgleason4594
@reidgleason4594 Год назад
I thought about this for a while, and here’s what i came up with: I would dual wield with one lightsaber being green in color and another shorter lightsaber colored yellow. the green one would look more natural, with a durable wood to form the handle. The shape of this handle is smooth and curved to mimic the flow of nature. It would have the krystal that was pooped out by the worm(forgot what it was called tho.) The second one is the polar opposite. It would be made probably from beskar and have no curves, only sharp corners and points to mimic the more technological side of Star Wars. It would also use the krystal formed from an exploding supernova. i dunno just a cool thought i like the idea of a jedi representing the two halves of nature
@pipsqeak7104
@pipsqeak7104 Год назад
I like this idea
@deadly9653
@deadly9653 Год назад
honestly, i would love something unique, like a long handle and dual-phase katana shaped blade, or a pike with a crossguard. but my favorite idea is double-bladed tonfas. honestly any of these would be very cool
@AgroGenLTM
@AgroGenLTM Год назад
My ideal lightsaber would be a curved hilt Saber with a ribbed black titanium grip lining and a white steel frame that had a magenta or gold finish with snowflake obsidian flowing up and down the blade in a floral pattern. It would have a dual core system where I could switch between two crystals, utilizing both a impact condensed energy crystal and vexil crystal. Each being preset to a different length so as to confuse, offset and delay any enemies. It would also be designed with a system for being able to alter the length of the utilized blades to presets differing by 4 inches.
@JohnDoe-zd4rl
@JohnDoe-zd4rl 2 года назад
There are several different unique design choices I would want on my own custom lightsaber. First of all, I would want an angled hilt for ease of 1 handed dueling. This would allow me to create the most distance between me and my opponent and focus on thrusting motions more akin to fencing since I am a fencer myself. If possible, I would like a small deployable circular handguard made of beskar at the base of the blade to assist my dueling style. People don't tend to realise how important some form of hand protection are in any type of blade on blade combat. I would also like to have a dial on one part of the hilt to control the length of the blade depending on what is needed for the situation. As for the material of the main hilt, titanium alloy would be ideal due to temperature resistance, strength, and resistance to oxidation. Around the gripped areas of the hilt, I would like there to be leather to make sure that I always have a strong and comfortable grip. For the crystal, I believe an Ilum kyber crystal would be the best due to the experience of obtaining it. As shown in the clone wars, it really means something to obtain one of these crystals, to overcome your fear and doubt. I believe the colour for my sabre would be green due to the importance i place on gathering knowledge in the pursuit of peace, instead of resorting to combat if possible.
@wafflecatking9829
@wafflecatking9829 2 года назад
My ideal light saber design would be two dark sabers that are able to combine together and split apart when you want it two. This is a good design to counter any attacks from opponents. Even though this cannot happen in cannon this would be a good design in my mind. Hope you like my design and good luck to all the other contestants
@belt3812
@belt3812 Год назад
I know I’m late to this, but I’ll do it anyways. My preferred saber would be a double bladed saber. The body would be similar in design to chancellor palpatine’s, but there would be a gold colored border and one side would be coated in beskar steel, the other the same silver colored material on pommel. The switch area would be combined with the body. The emitter would be a beskar material with a slanted ring around where the saber comes out of which would be on the other side also. The color of the crystal would have a light yellow core with an alternating black and white glow.
@noahgoschen3753
@noahgoschen3753 Год назад
I have two separate ideas for my ideal saber. The first would be a variation of the lightsaber pike that was actually a trident. For ease of carry the hilt would be expanding like the Tythian lightsaber pike. The other idea would be a two handed lightsaber with large beskar cross guards similar to Scottish claymore greatswords. The bottom of the hilt would be decorated with four claws or teeth oriented like a compass. Both saber ideas would have leather wrapped handles and some some form of dark brown and green metal to create an almost camo look. For the trident I would use two crystals, one would be the black wing crystal for the sinister appearance. The other crystal in the trident would be the incineration crystal to help with penetrating armor. For the great sword I'd go with either the impact crystal or a luxum crystal. Maybe both. The idea of a massive saber that staggers and shocks opponents is just so cool to me.
@TeejR18
@TeejR18 2 года назад
My ideal lightsaber would have mostly a gold hilt because I love the colour. I’d also love a purple/ amythest kyber crystal because I really want to learn the power of the light and dark side!
@theshortbus9777
@theshortbus9777 2 года назад
Personally, I would love a lightsaber that’s silver in metal type with a wood inset handle. It would be inset but not surrounding, sort of like the grips you see on decorated pistol handles. And after taking a couple of tests I’ve found I’m either a cyan (which I love for sure) or a burnt orange color. I think that having windows for the blades just makes the lightsaber gorgeous, and having flora style engraving on the wood would.. oh man that’d be super amazing
@NoGoodSwindler
@NoGoodSwindler 2 года назад
Yo dude, just reading through these lightsabers, I can’t believe how similar our lightsabers are! That’s insane!
@theshortbus9777
@theshortbus9777 Год назад
@@NoGoodSwindler that’s rad! I love knowing that other people have my taste as well
@breadstix-
@breadstix- Год назад
My ideal light saber design is a standard, dual-phase, hilt with a purple crystal inside. The design of the hilt is this one I made in Jedi Fallen Order: Emitter 1- Umbaran Switch- Peace and Justice II Sleeve- Passion and Strength End Cap- Power and Control Material - Umbaran
@guerillagorilla4423
@guerillagorilla4423 10 месяцев назад
Two purple crystals*
@Casper-Ghost
@Casper-Ghost Год назад
My ideal saber would actually be a pair of lightly curved dual phase lightfoils with Beskar hilts and a cortosis weave that could connect to form a double bladed lightsaber similar to Exar Kun's with a hilt the size of a regular lightsaber. I call it the Omnisaber because it can be used to switch between any style or form fluidly without needing any additional weapons. I'd want to use either a Stygium crystal, an Eralam, or a Ghostfire and I'd primarily use Trakata with a mix of standard forms dependent on the situation instead of focusing on any single form outside of Trakata.
Далее
🛑кто круче сделал?
00:12
Просмотров 91 тыс.
ELE QUEBROU A TAÇA DE FUTEBOL
00:45
Просмотров 11 млн
Вопрос Ребром - Toxi$
46:50
Просмотров 929 тыс.
The Darth Jar Jar Theory Just Got CRAZIER in 2024
22:21
Продавец года 😂
0:59
Просмотров 2,7 млн
Как я встретил вашу маму😁
0:18
Как я встретил вашу маму😁
0:18