Every STIHL MS 261 Owner Should Watch This! | Complete overview, tips and more.

Подписаться 16 тыс.

Просмотров 102 тыс.

50% 1

#CarlsMowerAndSaw #stihlms261cm #stihlchainsaw #stihl #chainsaw
Do you ever purchase a new product and forget everything the associate tells you about it as soon as you get home?
In this video, we go over everything you need to know to get the most out of your MS 261 including safety gear, fuel, air filter care/replacement and so much more!
------------------
◼️ SUBSCRIBE to Carl's Mower & Saw 👉 tinyurl.com/rz9ydtvj
After many years in the industry, Carl Levien decided it was time to go out on his own. The day came, April 1, 1990, when Carl and Beth Levien officially opened Carl’s Mower & Saw. With a clear goal to provide a higher level of service to Whatcom County, they opened their doors and started building a loyal following of customers. They discovered customers were refreshed by the quality of service available to them. Over the past 30 years we have continued to refine our services and provide the top equipment in the industry.
📞 360-384-0799 / 📧 info@carlsmower.com
Have questions? Drop a comment!
------------------
For more handy tips, follow our socials...
◼️ INSTAGRAM: tinyurl.com/mhjcr8md
◼️ FACEBOOK: tinyurl.com/unaenncp
------------------
◼️ WANT MORE TIPS? SEE OUR BLOG: tinyurl.com/9abjks9r

Опубликовано:

20 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 111

@twobeards6714 Год назад

I have two 261 cms. One runs an 18 inch full chisel chain. The other is set up with a 24 in bar and foll chisel skip. Both saws have cut upwards of 250 face cord and are super runners. I pulled the top end on one saw and ported it and the performance was greatly improved. I'd recommend this to anyone seeking a smaller sized pro quality tool. If you have any level of experience toss that low kickback chain that stihl supplies and you will cut faster and there will be less wear on the saw.

@saltrock9642 10 месяцев назад

My 261 went from “just a saw” to a beast with a full chisel (yellow) Stihl chain. And get a good raker gauge like the ones put out by Husqvarna.

@hnchmen34 8 месяцев назад

How does it handle that 24" bar...?

@enim83 7 месяцев назад

What chain is the full chisel chain. My dealer keeps telling me that the blueish link chain is the only one available

@saltrock9642 7 месяцев назад

@@enim83Stihl full chisel chains have a yellow mark on the box. You will notice a difference when you change over.

@michaelbradley770 4 месяца назад

@@saltrock9642 you can get full chisel in green and yellow. The only thing different between green and yellow is green is low kickback and yellow is not

@OnTarget100 Год назад

Thank you so much for an excellent explanation of how to use my STIHL chainsaw. Cheers from Sydney Australia

@richardjura7044 Год назад

Excellent presentation! Way to go! I have a MS261 CQ

@johnsweeney3060 Год назад

Great saw features demo, thanks for the info… keep up the good work.

@jamesford9917 Год назад

Thank you very much for the awesome video on the ms 261

@g.h.5284 8 месяцев назад

I can not thank you enough for pointing out the ppe which most of your fellow US folks neglect ... maybe I’m a little too germanish, but this is really so important !!!! Tell your customers to always fill up oil first, and we'll be friends ... The way you do explain things would even pass the German chainsaw license over here (yes, we do have a chainsaw license over her...) Thank you ever so much !!!

@jeffgood1580 4 месяца назад

Hah I just bought this saw yesterday and for a split second I considered skipping the chaps but I did get them and ear muffs. I was so glad I bought the chaps. They’re so nice to have and peace of mind is a great thing

@g.h.5284 4 месяца назад

@@jeffgood1580 Amen!!!

@g.h.5284 4 месяца назад

@@jeffgood1580well done, man well done: For your own safety!

@jeffcoulter7181 Год назад

Great review and fantastic safety advice.

@justmedontknowdoyou7860 Год назад

EXCELLENT ,,,,EXCELLENT ,,,,EXCELLENT video and VERY informative. I JUST bought this saw today. And can't wait to start to use it, 'GOOD PRESENTATION"

@markclark1605 2 года назад

Very good saw with reasonable power also. The weight is nice with very good balance. Good demo on the saw.

@Carlsmower 2 года назад

Thanks for the feedback

@jeffreyhall838 Год назад

Very good info...thanks

@tonypavone9775 Год назад

Wow, you nailed it!!

@danielmatthews3420 4 месяца назад

Thanks and I love my Stihl MS 261 CM!!!!!

@jeffberg9313 Год назад

very good video, thank you

@williamgrissom1995 2 месяца назад

My only issue with my 261, back when I had it years ago, was that it wasn't tuned very good from the dealership. It bogged down way too easy. So I would recommend learning how to tune your saw. I was inexperienced back then and trusted that the dealer tuned it up the way it was supposed to be and just thought it was a gutless model. So I just used my 361 instead, even when the 261 should have been perfect for the wood size I was cutting. Now I realize my saws weren't tuned for optimum performance by my dealer and it caused me to work harder than I needed to if my saws were tuned right. Maybe it was just my local dealer that did this type of thing. But I would now retune it if I had a Stihl saw underperforming, because Stihl makes really great saws and these saws I bought especially shouldn't have been running the way they were because my saws were all pro saws.

@tuberocker69 Месяц назад

No need to worry about that with the 261cm. It adjusts itself!

@damodoesall6240 Год назад

Great introduction Carl !

@robinverbridge4900 8 месяцев назад

Carl l really appreciate you covering several things l need to know about my MS 261! Thank-You ..... mine is NOT m tronic but very useful still.

@dwainetyncompany Год назад

I own an MS261C. Really enjoy it too. I’ve put a lot of hard hours on that thing. Clearing storm downed trees, bucking firewood for side work, slabbing logs of various hardwood species, even blocking out carvings right down to where I can take my angle grinder and go from there! Very versatile saw. I’ve never ran anything other than Motomix. I don’t run my saw for my career so the weekends and evenings throughout the week here and there are when I use it. Motomix lasts so much longer. I find a gallon of Motomix lasting me more than several months at the rate that I cut. Haven’t had a single issue with my saw, period. Not one!

@Carlsmower Год назад

Sounds like you are doing all the right stuff thanks for the feedback and keep enjoying the incredible chainsaw

@dwainetyncompany Год назад

@@Carlsmower The videos that you make really helped me out a lot in the decision making process. It's my first chainsaw so I had no expectation and no standards! Your videos are actually quite valuable to a potential consumer. A good voice for the industry too. You are phenomenal

@Carlsmower Год назад

@@dwainetyncompany thank you for that we are doing our best to not only give our customers the information they need but ultimately to bring value to other dealerships around the country And heck even the world

@valqueenofValhalla Год назад

I just got one is it really that great of a saw a lot of people rave about it I hope I like it as much it seems to be great 👍

@dwainetyncompany Год назад

@@valqueenofValhalla You definitely made a good decision in your purchase. I couldn't be happier. Honestly.

@Timijim Год назад

I’ve had one for a couple years. Not bad for a little guy.

@benjaminleslie3155 2 года назад

Certainly a peppy little saw 💪💯

@Carlsmower 2 года назад

Yeah for it size it is pretty awesome machine

@noturbizz1 4 месяца назад

storage season for my 261 isn't an issue, I run it year round because it starts so easy in winters in Maine. the mTronic is a game changer, I don't adjust carbs my saw does. 0 or 90 degrees it runs ghe same.

@dwhallon21 Год назад

Excellent video, only complaint is the starting sequence should have started the saw. PPE is extremely important. I have seen many saws tested or listed for sale where operator doesn't wear safety glasses, has shorts on, or wears open toe shoes. This is a saw folks, and mistakes happen fast. Where your PPE. I often wear my chaps as well. Yes they are a little bulky, yes in summer they are hot, but that saw chain doesn't know difference between wood and your legs, wear at least heavy pants with the other PPE equipment. Again , excellent video, and it's obviously that the demo person isn't doing this for first time, he is knowledgeable and excellent as well

@hankventurez Год назад

Based sales rep.

@turgus69 Год назад

great video, what length cutting bar is put on this saw? 50cm?

@thomasgronek6469 Год назад

thanks for the video. Questions: The MS362, AND 261 have similar control module / fuel solenoid issues, in that, when the original black solenoid fails (It is designed to fail between 100, and 200 hours (Thanks Stihl), and only the white solenoid is available, what control module should be used? I started with a 4705 A, I was told by Stihl that a 4706 would work, and it didn't, then I used a 4705B, and a white solenoid, (And an orange filter, an important but subtle change that one is supposed to have infused knowledge about I guess). It works for now. More importantly where can we find the information about such issues, the Stihl phone customer service folks rarely know the answers to such questions, , , , and the bigger saws also have issues with change overs, so it would be a million questions for every saw, and different reset procedures with different control module / solenoid combinations So here I sit, with an $800 saw, and another 250 into the saw (It has less than 150 hours on it), which I no longer trust. Which calibration or reset procedure does one follow when these parts are changed ?

@jeffreyrudolph5061 Год назад

Reply Thanks for sharing . Try an Echo ... for that perfect back up .

@bronzepodcast 2 года назад

Flip Flops are great for chainsaw work!

@Carlsmower 2 года назад

😂

@bradleymaddy7380 Год назад

Steel toe Crocs in 4wd work well also

@P.T._aus_B. Год назад

Never did that…😏🤥

@ParasitikOne Год назад

Everyone knows wild man style barefoot is the only way to go.

@stokermeister3 Месяц назад

When switching from winter to summer mode does a person need to do a reset of the saw or when putting on a 20” bar ?

@ridehardny Год назад

Great video, however the starting procedure is improper for a “C” series saw. It needs to be calibrated as outlined in the manual.

@freddiebuckner912 2 года назад

hi josh I hope you are well could you please do a video on the stihl ms151t, ms194t and ms201t

@Carlsmower Год назад

Great idea! We'll try to work these into the mix!

@freddiebuckner912 Год назад

@@Carlsmower great thank you

@user-iz1mx1zf9s 6 месяцев назад

Bagus sekali aku suka... ❤...

@barnyardbrio7597 7 месяцев назад

thanks for showing me where the gas goes

@2010bigfathen 5 месяцев назад

You are supposed to hold it at full throttle until you hear it change sounds, it tells all about it in the owners manual. That’s only on the first start up

@4kWalkingAndDrivingTours Год назад

That was awesome, thanks! 👍🏼😎😀 I want one! What length bar is on that one? I noticed Stihl recommends a 16” bar. Do they all ship to dealers with a 16”? I want a 20” when I get one. I have a 170 -16”, 250 -18” and I’d love a 261 with a 20”. I do understand I can add one, just wondering how they arrive default from Stihl, thanks! 👍🏼😎

@jeffsmith1830 Год назад

Bought one today. Came with a 20.

@4kWalkingAndDrivingTours Год назад

@@jeffsmith1830 cool deal, I bought my MS 261 two weeks ago with a 20” bar, works great! Love that de-compression button! 👍🏼👍🏼🤓

@grgygantz6760 Год назад

Here in hot azz Florida . We run Wession oil, since we also need oil to do our fries in the field.

@ericplatt3390 Год назад

Do these have gas vent tube? And where the heck is it located?

@MrDuffy81 3 месяца назад

I’m looking at buying a new saw. Actually my first saw. I was looking at the 271 and the mechanic at the store was telling me that it was a decent machine for what I need. Then I watched an online review and they were talking about the 271 not being with the 261 is. I used to work for a tree company and he told me to get the 362. I’m probably only going to be using it Once in a while. I don’t have my own tree business or anything but I do plan on helping some neighbors cut down some broken branches if need be after I get the saw. I could always try to make money with it. Wondering if the 271 would even be feasible to use to do trimming and cleanups and small removals? Or do I need to go bigger? Thanks for any information you can offer.

@ReggieChump 2 месяца назад

Which bar do you all prefer, the one in this video, or the new "Light 04" bar? The Light 04 bar looks rubbish compared to the old style, but does it cut better??

@goldbuyer Год назад

"You Own a 261" ? I wish. If I did, I certianly wouldn't run HP Ultra in it that's for sure. Other than that, great video.

@68fmj51 Год назад

What’s the problem with Ultra? That’s what I’ve been using in my MS 170 for years, and I just bought a 261 with a standard carb.

@ReggieChump 7 месяцев назад

Been using HP Ultra for years. Ran a KM 131r for nearly 4 years (strimmer head, leaf-blower, hedge-cutter attachments). It did a massive amount of work, I wore the driveshaft out on it, inside those 4 years... The engine still ran fine when I sold it. I'm a gardener, so bought a new KM 131r. Don't use that cheap fuel.

@ggi7778 Год назад

This guy is the Gordon Ramsay of stihl world 🤣

@EddieTM-gj3vt 8 месяцев назад

Where could I purchase the helmet you use?

@jeffcarinda1719 Год назад

Please(anyone), what his the best starting procedure for a warm MS 261 saw? I usually end up flooding it. It’s a new saw.

@aidansherry3890 Год назад

The key to easy warm starting is to allow the saw to run at idle for 5 or so seconds before you stop it so the tuning gets back to tick over, if you stop it straight off high revs it will still be on hi rev tuning when you go to re start and will be difficult to get going, hope this will help

@fredd323 Год назад

I had an issue with a tank vent that would prevent the saw from being started easily once warm. the tank would sometimes fountain gas or spit a mist of air and gas if you popped the fuel cap open after running or sitting in the sun.

@bldrmtnman 11 месяцев назад

Do you need to clean this saw's spark arrestor?

@AnthemBassMan 3 месяца назад

Should be part of your regular maintenance. Only takes a minute to pop out the screen to check if it’s getting a buildup of carbon on it.

@vascopires2045 2 года назад

don't forget to install the air filter

@Carlsmower 2 года назад

If you purchase from our dealership everything comes assembled, but good call!

@jaydee2620 Год назад

I usually get 2 tanks of fuel for every tank of bar oil, in ALL of my chainsaws. Idk is that just me ??

@jimzeleny7213 Год назад

That's pretty much what I get too. And usually sharpen the blade after two tanks of gas.

@ReggieChump 4 месяца назад

Can anyone help, please? The Ms261-c ( "18 Light 04 bar) states a 4.8mm file... But, when sharpening, I'm finding that the aforementioned file barely fits in the gullet? Seems too tight and awkward to sharpen, but it states it's the correct file? Any advice, please? From "England'istan".

@bobrazowsky85 3 месяца назад

4.8 mm is right file for .325 chains. I think you need to use a special tool for attach your file and that tool "slide" on the flat chrome gauge when you work, it's help a lot.

@ReggieChump 2 месяца назад

@@bobrazowsky85Thank you. Yeah, it seemed way too tight to start with... Almost as if upon withdrawing from the sharpening stroke, it was rubbing on the tooth. After quite a few sharpenings, it seems easier now. Just thought someone might advise a smaller file, a trick/hack, or something. Might try the 2-in-1 file, but I don't like the fact with the aforementioned, that it's only one part of the file in contact... I mean you can't rotate the file, or tap/clean it without removing it. Take care out there 👍

@bobrazowsky85 2 месяца назад

@@ReggieChump my methode : a simple file-holder sthil ( specific to .325, be carreful to choice this one) it's cost 12€ / $ . and a small oregon tool magnetic fixing on the bar, in red plastic, with visual-lines, for maintain 30/25° angle. Simple fast, easy and very efficient for me. flat-file by hand for the racker.

@ReggieChump 2 месяца назад

@@bobrazowsky85 👍

@user-id5eu6vd4z 29 дней назад

Yaatik essaha

@valqueenofValhalla Год назад

I run saws I have run them since 14 I wore chaps then while working I dropped due to heat stroke I will never wear them again. If I have to I wear arborist pants lighter comfortable and they breath a lot better they do cost half what a good pro saw cost though

@Patriot-pq1ku Год назад

I grow up around loggers my dad was even one for a few years I never seen one wear all this safety crap like chaps only good pair of pants an boots its the world we are living in

@ciphercode2298 Год назад

In reality accidents can happen,but learning about tension and compression in wood will greatly diminish the risk of injury. It's also good practice to offset your stance some and keep your bar and chain in excellent condition.

@Sgt.chickens Год назад

@@Patriot-pq1kumy dad has been a woodsman for over 40 years. He never goes without safety equipment. Its not "the world we live in" its common sense. Seen plenty of cunts who say "oh i dont need that" end up sawing straight into their leg. All of a sudden the safe guy doesnt look so stupid

@rogerpowers3891 4 месяца назад

@@Sgt.chickens Nah it’s common sense do not do anything stupid. You can be safe without looking ridiculous with all the “safety” stuff all over you. So aka don’t be an idiot and be aware of your surroundings and you’ll be fine. End of story.

@pietdeboer5008 Год назад

I like this saw. What sword do You use, 40 cm / 45cm ?? I own the MS 211 / 35cm sword and the MS 251/ 40cm sword..👍👍 Greetings from Germany Piet

@aussiehardwood6196 Год назад

I use a big Sword...it makes it more powaful.

@ciphercode2298 Год назад

Here in the states we usually run an 18" or 20" bar on the ms261.

@paulliberatore6199 Год назад

No flip flops?? Tell that to the crews in Indonesia...they won't listen to a word you say. I've seen them practically naked trimming and removing trees...no safety harnesses, thread for ropes, no safety gear whatsoever, free climbing; insane, however...no injuries.

@Sgt.chickens Год назад

No injuries untill their is. And when their is. Its not going to be a little ouchie.

@anthonyduffy1278 10 месяцев назад

Just instant death! Roll deceased to one side,dig grave, roll deceased into grave and backfill. Hey presto, job done, don’t bother with accident book lads. Nothing to see here, back to work, chop chop!

@HedgehogOutdoors Год назад

Someone told me this saw has a metal body, is that true?

@tonydalton8712 9 месяцев назад

It has a Magnesium body.

@visa1960 10 месяцев назад

How many cc

@robertgoth5570 7 месяцев назад

50.2 cc

@Jason-fg4jr Год назад

There is a channel redd flag works on saws and that hp ultra is jacking up exhaust port side of the piston... I have 7 saws and won't be running that caster crap anymore

@matthewlarock3614 6 месяцев назад

No one makes a pair of chaps for big guys.

@hamrochannel4891 Год назад

Price please

@bradleymaddy7380 Год назад

I bought mine a week ago, $700 is the going price in Ohio with an 18” bar. Add $20 & you can get a 20” bar. With my research of reviews, the 18” seems to be the sweet spot for balance

@bradleysmith4649 6 месяцев назад

Boots gloves

@em4703 Год назад

HP ultra sucks, there are better synthetic oils out there. The carbon deposits with that oil even when running the best fuel, is crazy. Hard pass, just because its "bio degradable when spilled", that doesnt cut it when your piston gets scored to crap before 1000 hours of work instead of 3000+

@tonydalton8712 9 месяцев назад

What oil do you recommend?

@em4703 7 месяцев назад

@@tonydalton8712 Motul 800 offroad, Echo Red Armor

@AnthemBassMan 3 месяца назад

Amsoil Saber also. But regardless of any oil stating that you can run 80:1 or 100:1, personally I always run a 40:1 mix. That Stihl HP Ukraine is bad. Charging what they do for an oil that still has a JASO FB rating. Come on. Super Tech from Walmart is rated FB and costs a lot less.

@uppertributaries Год назад

Dirt and debri have entered your cylinder.

@jbruins156 Год назад

snoozer

@kellysahy2850 Год назад

All you’ve done is describe the obvious by giving a “reader’s digest” version of the saw’s manual. So stupid. You give yourself a bad name by enticing “clicks” with the video description, but then just give a bland sales pitch.