Everything You Need To Know About your Apollo LCD Settings (Tutorial)

Подписаться 9 тыс.

Просмотров 400 тыс.

50% 1

Tyler walks you through an easy to follow guide on how to use your Apollo Scooter LCD screen and settings.
If there is anything we forgot to cover, leave a comment below.
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
As always, if you have any questions or concerns, get in touch with us via email or phone.
E. contactus@revrides.com
P. 360-888-7433
Stay in the loop:
Instagram: www. REVrides_official
Facebook: www.Facebook.com/REVrides

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 670

@kimochino9047 2 года назад

Just bought a Zero 9 and Im glad I saw this video. This wasn’t included in the instructions manual.

@ricardomedeiros3080 4 года назад

Thanks, man!........I really needed that video......I just bought a Zero 10 and was already trying to figure out all the panel control settings

@lucasfrost8093 3 года назад

Just bought an M4 , great help man thank you , really needed that 👍

@Tyson133__ 3 года назад

how fast

@musiconair 4 года назад

I was hoping I’d find this tutorial, cheers man 👍🛴

@mariusgmail670 5 лет назад

Zero 10x LCD settings P1: lcd brightness P2: miles/kilometers P3: voltage (depends on scooter) P4: hibernation timer P5: P6: wheel diameter P7: number of magnets on the motor (don’t change) P8: limitation on power P9: kick or zero start P10: P11: electronic breaking 1-5 P12: soft or high acceleration 1-5 P13: P14: P15: cut of voltage (don’t change) P16: zeroing the km counter P17: cruise control (on=001) P18: P19: P20:

@norwegianvikinggamer3049 4 года назад

Thanks a LOT for the information. It helped me a LOT💯💯💯

@Melissa05121992 4 года назад

Thanks for the info 😊

@kennorips 4 года назад

I can't get the accelerator to go, what settings do I use

@merivale1977 4 года назад

Hi, difference from A and d if you press red button for 2 sec?then p15 voltage setting of mine is 39!it s ok?zero 8 41v 10Ah, thank you!!

@ElFalkoo 4 года назад

Is the settings same on 8x?

@nitheal95 Год назад

Thank you so much man I got my girlfriends scotter going so much fast it went from 19km to 32km thank you so much

@marcfortune7117 2 года назад

hi, im running two motors and another controller weith this, but I cant work out how to get the speed signal over to the 2nd hub, usually I'd take the signal from a 5v throttle, can this be done

@RevRides360 2 года назад

They should read together

@djmcjuneski8796 2 года назад

need to know evercross h5 electric scooter any tips on changing speed..Great tutorial

@RevRides360 2 года назад

Thanks for reaching out to REV Rides! Feel free to reach out to Service@REVRides.com for further assistance.

@cancant9547 3 года назад

Thank god for this video🙌🏼

@aaronland2320 Год назад

Does this video only pertain to yoo or ur brand of scooter?? Just bought an EVERCROSS H5. And only have like maybe 6 P-settings

@jeremygorbea7339 2 месяца назад

How do you change it to see the speed in mph? Mine shows KM

@MaeRiGee 4 года назад

I don't have P8 power level. But the P15 is 100. By any chance the power level is P15? Then again i don't have Cut off voltage. Kindly advise.

@dripgodxxx3515 3 года назад

What does e 07 mean? If it’s flashing on the screen

@RevRides360 3 года назад

Hey Adam, Error 07 is a motor fault code. I would suggest checking the wiring where is enters the motor at the axle. A fault in the wiring harness is more likely than an issue with the motor internally.

@h.frilander2030 4 месяца назад

I would like to limit my Zero 10 speeds from gears 1=28kmh 2=45kmh 3=50kmh to 1=28kmh 2=35kmh 3=45kmh. Is that possible?

@liammasonsimmons6232 2 года назад

Mines different. I don't have a p8 it just goes from 7 to 9 and I don't have a few others. It jumps to 99. Im confused

@RevRides360 2 года назад

You may have a different LCD

@Low-effort-individual Год назад

Cheers been wondering how to turn cruise control off it gets a bit sketchy at higher speeds

@torreniles469 Год назад

Hello Tyler, thanks for the information. I have a Dualtron scooter with MR-100 throttle body. For some reason it just stopped working. Like a fuse was blown. Do these controllers have a replacable fuse? Or do I need to replace the MR-100. Thank you for your help.

@RevRides360 10 месяцев назад

would need to replace.

@gadh98 6 месяцев назад

hi tnx for the guide. when i in the settings menu (p-settings) , and i long press the power button, the "A" in the bottom line changes to "D". do you know what is the purpose of this mode A/D ?

@haniest2410 2 года назад

I just buy x1 pro v2 scooter but don’t know why can’t turn it on 🥺

@piccolociccioo 2 года назад

Io ho questo computer qs-s4 e monto una batteria Lg 72v 32ah monopattino zero11x P03 - Voltage level of machine 72 giusto ? e P15 - Controller cutoff voltage?

@Fiatfan Год назад

What is setting 20? Where can i find list of numbers and their meanings?

@snuggiebear01 10 месяцев назад

The motor is not working on mine and I’m getting an E9 flashing with a caution sign on the controls. Any suggestions?

@RevRides360 9 месяцев назад

controller fault needs a controller or bad connection

@MrSeal6127 2 года назад

How can I make it auto gear 3 when i turn it on when i turn it on it is always on 1¨

@RevRides360 2 года назад

Unfortunately they are always set to 1

@MrSeal6127 2 года назад

Ok:)

@garygaccione983 2 года назад

How do u get rid of red triangle warning light my scooter won't run

@vakosaatashvili4235 Год назад

First of all , many many thanks for this great video mate ! Just got Zero X and I would love to make settings, but unfortunately when I press this 2 bottom together instead of P mode comes number 50 and asks some code , do you have any idea what can be ?

@RevRides360 Год назад

For further assistance, follow up with us via email (Service@REVRides.com). Have a great day!

@VeltiVelton Год назад

try 5252

@josephlabarbera7373 3 года назад

I have a mototech thor 60v 2400w scooter and someone messed with the P settings and im trying to get the right settings! Could you help me ? Please

@hadowman6847 4 года назад

Nice, how could you make it waterproof ?

@BudgieFan101 3 года назад

Hi can anyone help with my 11X please? What exactly is the voltage cut-off and why is it set at 52 V when it's 72 V?? Unsure why and of the cut-off purpose. Also, what should the magnetic setting be set to and why. Thanks for your help in advance.

@1800dontcare 3 года назад

The “cutoff voltage” is for when the battery reachers 52v to save the battery so it doesn’t wreck the battery. If you haven’t changed the magnet settings they don’t need to be messed around with at all unless you have messed with them

@jackmenino9654 5 лет назад

Thanks for the tips, but I realized theirs a USB port on the LCD unit what is that for? Thanks

@saltydegen 5 лет назад

Charging your phone

@ouacinc 5 лет назад

@@saltydegen correct for reference to others, measured 0.47 amps @ 4.78 volts with iphone connected using in-line usb meter.

@Jaker_Cospic 4 года назад

Some P modes not appear on My settings like the 1st one, brightness set, just skip to P2, You know how to unlock or restore factory settings? Thanks

@RevRides360 4 года назад

Hey, we have never seen that issue. Does your LCD say”QS-S4” on the front of it? Where did you purchase from?

@wildbillhandcock1327 3 года назад

@@RevRides360 my turbo lightning plus has a error code e07. I was going down a hill for a while and all the sudden the scooter wouldn’t work. Any suggestions. Thanks.

@tiuuulouisss3801 2 года назад

Good day guys! If your scooter is 60v should the P3 setting be set at 60v? And whats the purpose of it that u can change to lower volt and still runs

@RevRides360 2 года назад

Yes this will make sure that your battery read out is correct and the scooter does not die early or allow the battery to go under voltage.

@connect. 4 года назад

When you're on any P settings and hold down Power button, it toggles between A and D. What does it mean?

@RevRides360 4 года назад

A for Ascending, and D for descending. This changes whether the setting unit increases or decreases when you adjust it with the mode button.

@timothybeebe6382 3 года назад

Great video thank you for the instruction

@spagget 3 года назад

hi, i changed the p9 to kickstart but whenever i restart the controller (power off and on) it defaults to power start

@HawkLad 3 года назад

is it the same for the Apollo Ghost?

@vicentefabian2975 4 года назад

Just bought mober s10. After driving for about 100 meters, motor stopped. E-003 error is indicated in lcd display. Pls help. Thanks

@Eazyemphs Год назад

How do you reset all settings back to default

@RevRides360 Год назад

For best assistance, follow up with us via email (Service@REVRides.com). Cheers!

@djamal5315 2 года назад

Is it possible to change the speed limit ???

@RevRides360 2 года назад

Thanks for reaching out to REV Rides! to better assist you, send in your question to Service@REVRides.com!

@davidrossmiller8349 4 года назад

You said 17 is for cruse control then you said 17_18_19_20 are not used........i understood though great video thanks

@RevRides360 4 года назад

Oops :)

@mariovisak7450 4 года назад

Can you change in settings that when you turn it on it starts with gear 1 not with gear 3?

@RevRides360 4 года назад

Hello, currently the default behavior is that the LCD starts in Gear 1 when powered on. This can not be changed at this time.

@air21511 3 года назад

any video how to install an alarm / immobiliser? does sit have an app?

@RevRides360 3 года назад

We have an installation guide but not a video. If you purchase one, we send the installation instructions.

@Marcella5822rainbow Год назад

Hay everyone,n got the x10 for the most recent and just straight up crippled the scooters motors. So we are all aware of that Lil red triangle whenever you're on the breaks, as a safety feature it kills the power to the motor. Well I'm getting it when I start the scooter and it has an E-010 and I can't get it working or over ridden can anyone please help

@RevRides360 Год назад

For further assistance, please follow up with us via email (Service@REVRides.com).

@josemancha7048 2 года назад

P6- is my tires are 13in should my wheel diameter be at 13.. thanks for anyone that can help with this answer

@RevRides360 2 года назад

Thank you for reaching out, for further assistance reach out to Service@REVRides.com!

@reeferexplained8846 2 года назад

Can someone advise the green bar on screen is that 100% battery

@RevRides360 2 года назад

Yes - the green bar across the bottom of the display indicates battery level.

@reeferexplained8846 2 года назад

@@RevRides360 yes great is that 4 segments as per your video it that fully charged

@R3ldred00 3 года назад

So I have a m4 pro should I change the p12 too 100 so that the scooter will reach its top speed faster

@jayjake4088 3 года назад

No!!!!! Definitely dooooo notttttt change too 100, what your gonna wanna do is change it to "00" , reason being because then it won't go at all , thus saving the rest of the community and innocent bystanders from u on the road with the dawn thing, I bet you couldn't even drive a freaking nail into a block of wood, let alone "ANYTHING" motorized! ATTN: stupid people, just stay home and practice counting hair or something, pleaaase!!!

@smileyy80 4 года назад

I am a heavy rider(110 kg) and my current scooter(Not Zero) struggles with overheating, after a long hill climb. I will usually get a notificaton on my mobile app + scooter trottles down to the lowest gear setting. Since there isn't any mobile app to the zero scooters(?), how will a Zero scooter react to overheating? Will the display give some sort of notification? Or isn't overheating an issue with Zero Scooters?

@yohvh 4 года назад

always drive dual motors. one motor will have to do half the work. and it uses about the same energy. try eco if thats enough to climb. or second gear.

@metaljew4456 4 года назад

smileyy80: Get a Zero 10X with the big battery or the Zero 11 if you want to go all out. You won’t have any overheating problems then. And run dual motors when possible.

@jameslaverty6567 4 года назад

Does the Zero have a regenerative braking system if so what number is it?

@RevRides360 4 года назад

They do. P11 will let you adjust the intensity of it

@damimana1 4 года назад

can i turn off my side leds somehow?

@RevRides360 4 года назад

Not on the ZERO models. You would have to unplug them from the DC converter.

@James_Innes 3 года назад

I'm putting a on / off switch in line, up to the handle bar if that helps.

@cdbrown30 4 года назад

Is there a way to turn on lights?

@RevRides360 4 года назад

To turn on lights, hold "MODE" for 2-3 seconds.

@bugradisiack2245 3 года назад

How can I opened front light help me please

@RevRides360 3 года назад

Which scooter?

@dragankovacevic975 3 года назад

Great but you dont have to go all around of you miss the number,just hold power for 2s and it will change to fo down so you dont have to hold or push it 100x times

@jayjake4088 3 года назад

Who asked you your opinion bitch?

@dragankovacevic975 3 года назад

@@jayjake4088 your mom

@Jmedina-yc7bm 4 года назад

Do any of u guys know why my zero 9 is making a whenever the tires move

@emmanueljacinto3892 4 года назад

My display is always in ZERO how to fix it

@Pirelli. 3 года назад

can someone tell me if this controller is also compatible with the YUME D5 scooter?

@RevRides360 3 года назад

If your LCD has the same 5 prong connector then yes.

@Pirelli. 3 года назад

@@RevRides360 I have to check first.... Thanks for the answer.

@seffersmcroberts Год назад

Mine won't save the settings

@RevRides360 Год назад

Sorry that you're having troubles. Do you mind sending an email to service@revrides.com to have a specialist help you out?

@tomandrewz6182 3 года назад

Can you turn the neons off

@RevRides360 3 года назад

Hey Tom! All lights are on the same circuit, and at this time it is not possible to only turn off the accent lighting.

@anthonyyoung7721 2 года назад

My man! This is exactly what I was searching for. Clearly explained and easy to follow. Just set mine up as u recommended. Legend! Cheers!

@SEGplus 3 года назад

What the difference with A and D in P settings if you hold the power button for 2 sec? I have a Zero 9

@alexxxx7436 Год назад

I too want too know this....

@the-bu3lb 4 года назад

MINE IS VERY HARD TO SEE DURING THE DAY WHEN THE SUN IS OUT. IS IT POSSIBLE TO SWITCH TO THE MNIMOTOTRS LCD SCREEN OR A DIFFERENT CHINESE BRAND.

@RevRides360 4 года назад

We haven't been able to get the Minimotors controller to work on the ZEROs. Have you tried changing the P1 setting?

@smile3dLand 3 года назад

You're very tall or the scooter is very small? 🙄👀🤷‍♂️

@Gregtman502 2 года назад

what if my settings won't save?

@borisevraev8190 2 года назад

Hi i would like to set P11 and P12 to 5 (electronic breaking and acceleration ) is it can harm the z10 motor or the battery?

@RevRides360 2 года назад

Hi Boris, You can definitely up you braking and acceleration! Ride Safe!

@chinook3302 2 года назад

When i set P9 to push to start mode, it is ok until i turn unit off then back on it reverts to 0 which means when you touch the throttle it wants to move, any ideas, Thanks.

@RevRides360 2 года назад

Try doing this again and after changing the setting, back out of the settings by holding power and mode. Then the setting should save. If this does not work contact us at service@revrides.com . Safe riding!

@chinook3302 2 года назад

Thank you REV Rides, solved my problem, 😎👍

@eugeneyoungman5397 2 года назад

I have a winner sky E10 off-road but it only has a few of the settings unlike your video i just watched

@RevRides360 2 года назад

They may be using a different LCD.

@marshal7102 18 дней назад

Ii have an Evercross H2 and ordered a compatible size and voltage as my old one. When I replaced the Battery and charged it up, It did not run as fast as before, Like 1/3 power was gone. Then I thought I would re install the old battery to see what the difference actually was and now It did the same thing when i reconnected it. I have two of these scooters so I compared the settings between both P settings and they are still the same. There must be another setting that was lost when the power was removed. Do you have any Idea?

@nahariguy6 3 года назад

Hi, i have a question, when i enter the P settings and long push the on/off button, the letter ''A'' on the bottom left changes to the letter ''d'' And I wondered what it does... so if you know please tell me :)

@kaanyharamy8157 2 года назад

any informations now?

@6mariooo235 2 года назад

i dont think there is any change with a or d

@BudgieFan101 4 года назад

Number 8 Power Settings on my 11X only go down to 45. It's still too fast on take off.

@afgnbliss01 4 года назад

You have to go to P12 in settings and set it to 1,2 or 3. 5 is the fast take off.

@cademintz9793 3 года назад

My battery on mine always says it’s fully charged any suggestions?

@michaelpayton9475 3 года назад

Make sure your P3 is correct for the voltage of your scooter. 48, 52 or 60

@z.x.c.l.s.b.n3531 4 года назад

You didn't mention USB port, on the Zero 9."on left hand side of the screen" Thanks for the smile,

@siiil21 4 года назад

That's for charging usb devices

@z.x.c.l.s.b.n3531 4 года назад

@@siiil21 yes it's a charger, only seems to work while your on the scooter and not all zero scooters have them.best .

@lexxzus 4 года назад

Thank you for the outstanding job you did in this tutorial.

@gogomac 5 лет назад

Hello, from Colombia. Is this screen and the entire scooter waterproof? Does the scooter resist use in the rain? Here in the tropical zone, it rains a lot. And we want to know if they have damage when driving in the rain

@jfoldger1184 4 года назад

Gonzalo Gabriel Gonzalez Cano I have an 8 and it says do not use in wet conditions, but I saw a video of someone attempting to make theirs waterproof with some silicone or something I want to try it out

@jfoldger1184 4 года назад

Would be really nice if it was water proof out of the box

@Jaker_Cospic 4 года назад

Yo también soy de Colombia, que tipo de scooter tiene? En general es mejor que ninguna las meta al agua ni siquiera en lluvia o charcos, siempre se terminan dañando aunque digan que son IP54 de resistencia al agua y polvo

@NetoAus Месяц назад

Hey! Thank You for the information! But unfortunately I didn’t find what I need, my LCD display doesn’t show my battery right, just full or empty, any configuration for this? Cheers

@erichormick5205 2 года назад

Why won't my error 10 stop blinking I've tried everything

@RevRides360 2 года назад

Next would be to try replacing the lcd wire.

@boyromantiko1266 4 года назад

i bought now new one..but why not working the accelerator but the power is on .iys not running .can u help me whats the set up to accelerate again

@RevRides360 4 года назад

It is possibly on kick start. If so, you will need to kick off i order for throttle to work. If you want to change that setting, P9 will let you enable/disable it.

@andrewlifka6019 2 года назад

Finally I found a video explaining this. I probably have everything screwed up right now

@toddlauretteHabsforlife 4 года назад

What does it mean when u get an E 10 error on your screen? I have a brand new scooter, got not even a quarter of a km, and then got the e 10 error, the company is sending me a new throttle, they say this should resolve he problem, i hope so. I paid almost $3000 for a 1/4 km, that's pretty steep!! lol. I feel as though I already waited so long, now this!

@sizekfm 4 года назад

Hey Todd. Please update me if you get this fixed. I have the same issue and it is proving difficult to get fixed.

@karimhouha7933 4 месяца назад

Please hero x8 setting p15 voltage 40.41.42 ??? Someone has sabotaged the settings Scooter 52v23a Controller 52v cut voltage 40v

@wolftube4443 2 года назад

Hello, my scooter only moves when I push it, can you help me

@RevRides360 2 года назад

Hello please contact service@revrides for assistance!

@nottinghamforest2980 Год назад

please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you

@psychodelo 4 месяца назад

is there a setting for battery percentage? I have a scooter with the same Indicator panel, I run about 25km still the battery indicator is still full charge, but then suddenly it wont start and i quess its low bat. is there a way to calibrate the battery bar or percentage?

@vitgud3687 2 года назад

Hello i have my techlife x7s scooter and batery when was new i was going around 50 km.. Now i see how is drain faster now i can go only 40 km... I done on it 3700km..... So my battery gonna be more bad till it die or i will gona have only 10 km range at end?

@Dajlec 2 года назад

hey my zero 8 only charges max up to 4 out of 5 bars and =50.2V. I'm talking when the green light on the charging brick turns green. So is it blocked to max 80% charge to preserve the battery life?

@RevRides360 2 года назад

Make sure and check your p-settings are correct

@dons.7381 Год назад

Tried. these setting on a iENYRID M4PRO S+ and it does not work on every setting. Unless I did something wrong. Thanks

@Gifthugs Год назад

I was going to my friends house and when I was going to my friends house, my scooter died right in the middle of the street and I was walking at home. And I cannot even find the battery level because when I turn on my scooter, it’s always fully charged, but it never decrease,

@Gifthugs Год назад

@faycal2748 3 года назад

Good evening, how to remove security please because I have to go with it to work thank you for responding quickly.

@iZilly Год назад

So how do i set a complete Max speed on my Zero 10X to a complete Max of 30 kmph no matter what gear I’m in?! I’m tired of having to manually keep the speed down with police around

@carlamor323 3 года назад

Why my battery meter shows empty even when my battery is full

@carlamor323 3 года назад

Help please

@RevRides360 3 года назад

@@carlamor323 Hey Carl, I would check that P3 is set properly for your scooter. This is the nominal battery voltage (ZERO 9 = 048)

@hyrulemasterchef9573 2 года назад

I have a 60 volt scooter. It came set at 31.5. Do I wanna set it at 60?

@RevRides360 2 года назад

It depends on what model and lcd you have

@hyrulemasterchef9573 2 года назад

@@RevRides360 I see. Never mind. It’s Under voltage cut off to protect your motors from under voltage. If you let it rip while your 60v scooter is under 48 volts bad stuff can happen. 31.5 is a example the users manual gives. And I’m seeing riders setting theirs to 31.5. Their scooter won’t last long lol

@hyrulemasterchef9573 2 года назад

@@RevRides360 I’ve had a lot of scooters, the Fieabor Q08p is the probably the best thing that happened to the scooter community, for $1300 the force behind this thing is INSANE

@mattsmith6455 16 дней назад

what would make my ebike take off as soon as i power on the ebike without the throttle being engaged and the throttle dont work when i do engage it

@willcamick 2 года назад

Hello. When I am not accelerating I slow down pretty fast. Is their a way to turn that off so I can cost with out using up power?

@RevRides360 2 года назад

P17 set to 1 should set cruise control!

@smoxesss 3 года назад

Mines change to miles then auto goes back to klm it's annoying had it 3 days now only done 36 miles need a place to ride out to and think will get new controller off am locked 🔒 😑 out of settings

@bernarddevine7334 Год назад

Unfortunately I crashed and now its playing up. Just wondering if there is any way of reseting the controller.

@Buzzhumma 4 года назад

Hi there , how long before an app like the xaiomi 365 has ? It tells so much useful info even individual parallel cell voltage . a xaiomi bms could be piggybacked and then many of the app functions will work.

@2Str0k3 2 года назад

Any idea how the cruise control works? Does it require to maintain a certain speed for the X amount of time or the accelerator to be held an X amount of time? I have the LH-100 and assuming its pretty much the same in this one but i havent gotten much sense of it. Certainly not 10 seconds. More like 5. Its just real weird since sometimes it seems to activate after like 4 seconds and sometimes it wont...

@alexbaran8845 2 года назад

Thanks for reaching out! Feel free to reach out to Service@REVRides.com more information and assitance! Cheers!

@sbshjzkx 2 года назад

Its tha same to X10 too ?

@RevRides360 2 года назад

Yes but the setting will vary per scooter. Be sure to look at your guide for exact specifications.

@JacobOlli 2 года назад

I got a new e scooter, it was fully charged. And then i changed the volts from 36 to 60. And after that, the battery sign on the screen keeps blinking and only showing 1 bar. Do you know why that is? Also mine skips over some settings in the p menu

@RevRides360 2 года назад

The volts of your scooter cannot be changed in the LCD. The Volts are determined by the battery. Please set the LCD voltage to be the volts that match the battery in your scooter.

@bugza5842 2 года назад

Hey mate solid video, my speedo isn’t accurate and I’ve done the wheel size to 10 and that’s all good but I’m going 30mph and it says I’m going 3mph just really confused done all the research but I can’t find anything. Thanks