I am grateful that thanks to this video I was able to repair my transmission myself with your explanation I send you many blessings and that it multiplies not everyone likes to teach congratulations
I wanted to let you guys know thanks to you guys I was able to save several hundred dollars because I watched your video like three times and took my trance apart myself thank you for your time really help me out really appreciate it
Super informative and cool to see how everything actually works. Still is a little intimidating. I wish I just had a trans sitting around to play with to get a better understanding of how things work together. Thanks for sharing this video
Im impressed that you were able to do this all on your own in the garage, its nightmarish unless you have a fit buddy to help fit the transmission. Its so detailed that its deceptively easy to do, when in fact it isn't unless on a hoist with supporting equipment. Even then theres two dudes working on it. Very Impressed!!
IT WOULD BE REALLY COOL IF YOU COULD DO ONE MORE ABOUT THE TOLERANCES AND THE SPECS FOR WHEN GOING BACK TOGETHER. BUT THANKS YOU ANSWERED A LOT OF MY QUESTIONS
Nice! I'm working on an F5M51 myself. Same transmission and guts, just paired to a front diff only. Pretty soon I'll be working on stripping the output shaft to change my final drive actually, like you had mentioned. Glad I managed to stumble on your stuff! I haven't seen a good video until this on the 5M51s.
I'm trying to swap the evo 8 trans into my eclipse and was wondering if all the shifter stuff from the eclipse trans will swap onto the evo trans. I might have to build an evo trans from parts because I can't find one for a decent price.
Congratulations for this awesome channel. I'm learning a lot with your videos, and it is very important to now how this cars work to save money 💵. Thank you very much
Very handy video, thanks. I'm about to make a similar video for my Legnum VR4 and explaining where the centre differential is by linking to your video will help. I'm installing an MFactory front helical LSD but want to point out the difference between the front LSD, and also the Viscous Coupling Unit + the actual centre differential.
Your vid just helped me loads thanks man I slid the 3rd And 4th selector off and couldn't put it back in lol I could see the deeper teeth bout couldn't figure out where they go into by luck found your vid thanks man I appreciate it
There are different size shims that are available for rebuilding these. I guess the service manual shows you how to check the tolerances for it but a video would be nice lol. I'm thinking of building an evo trans from parts and I dont know what shims to get. They have the different sizes listed on jacks transmissions website.
So my third gear recently started grinding when I shift into it so I changed out the synchro and it kinda solved the problem. It doesn’t grind when I’m gentle with it but it grinds when I go into the gear fast! I don’t miss the shift either lol but I was wondering what else can it be?
My evo 7 scrunches when going into third gear aswell , But seems after driving the car for a couple of miles it stops scrunching and is like normal , still bamboozled to why it is doing that
@@_umbroprints3886 previous owner offered to rebuild my transmission so I went with that lol. Now the problem is gone! I got a tune recently and after the tune I would shift and it would make like a weird “woo” noise when I shifted then it went away lol
Arguably the most important part was left out . How do you align the gears so that you can split the transmission apart ? Probably not called gears tho .
Cool great video. Question, is that ball bearing sits on top of the bolt to push the clutch fork in-out, is it the same for lets say a Mitsubishi 1999 manual transmission 420a engine?
@@BoostedFilms ah yah im outside the US.. so is all input shafts longspline in the 8-9 ? or i guess they wont be long spline to you more like "normal" lol.
Great video. I tried to take apart my 6 speed for shits when swapping to my 5 speed. I could not find ANYTHING online about how to open it up - it was a pain. 5 speed looks much easier to open up mainly because the 6 speed had a bunch of balls and spring detents that are not one assembly like was shown here on the 5 speed. In addition, I could not get the shift forks or shafts out because somehow I think I locked them together. Regarding the bushings mentioned at 1:50, here is a link to the parts. I ordered: - Mitsubishi 5-Speed Gear Select Shaft Cover - Evo 4-9/x $1.85 - Mitsubishi 5-Speed Gearshift Equipment Bushing - Evo 4-9/x $2.82 - Mitusbishi 5-Speed Gearshift Selector Bushing - Evo 4-9/x $2.82 stmtuned.com/collections/evolution-7-8-9-oem-mitsubishi-shifter-cables-parts ^I personally try to avoid STM because I don't really like their prices, but they are great for OEM parts. My 5 speed shifts so smoothly from Nuetral to 1 that I literally sometimes worry that the gear linkage has come undone LOL.
Boosted Films thank you. After putting my trans back together my car doesn’t want to fully go into 2nd, 4th, and reverse. (They Go in and drive but they don’t feel like they used to) Maybe a linkage issue?