Evolution Power Tools CHOP SAW S355CPSL (Cuts Steel) 

That adapter is for clamping square tubing on the recommended cut angle too.

I didn't know that about cutting the front edge first on tubing! Great information!

I'm using mine to build a tapered screw type log splitter. Although augmented nicely, that's Evolution's stamped steel base model, kinda their middle of the road model. They have another model that hosts a more rigid cast aluminum base but, they all offer stellar operation. Nice job..

I bought the Evolution Rage 3 compound sliding saw and love it. I might have to look into that one too.

Excellent video and review, straightforward and to the point!

Decent advertisement. I’m buying one👍🏼

I have the same saw , hell’uv an addition to the workshop ! Cool review DC

I've been cutting 160x84mm HEM I-Beam with my saw. I take it slowly as it is lying down and therefore having to cut alot of material at one time, but i cuts perfectly everytime!.

Try using the attachment on the fence for cutting angle and square tubing, thats what Evolution advise.

you have the cleanest shed in the world!

Thank you for sharing........good comparison

Bad ass!!! Thanks for the review

Right on, Great review 👍

ideal saw 🤗

Very nice saw. I have their 10 inch multi-material sliding miter saw (orange one, I have a Diablo blade on it now [thanks to your advice], cause I cut flat stock once with the original blade, just kidding) but I love this saw it cuts like butter with very little sparks and cold cut ends! Thanks for the info-mercial! 🤣👍

Thanks for sharing awesome 😎

Great review. Do you happen to know what the depth of your bench is? Im looking to buy one of these but not sure it will fit on my current work bench!

Need to sale my abrasive saws to get me one 👍🏻 thanks great review

I would of liked to see how square the cuts were

did anyone have jepson premium dry cut for compare....???

nice saw! are you satisfied with your dewalt after all that use?

I have a couple of suggestions for you: if you are going to use a stop fence when making repeatable cuts I would devise a way that I could index the length and then remove the stop to allow the cut off to not be captured between the the blade and the fixed stop as you have it. This practice could be dangerous as creating a kick back of the cut off. This is particularly dangerous on a table saw and I have many kickbacks from my miter saw with wood a tooth grabs the edge of the cut off. One suggestion to mitigate this could be mount a drawer slide on a piece of angle bracket. When index the Length slide the drawer slide away from the end of the stock being cut it just drops to the table top and it is not trapped between the spinning blade and stop.😁🛫 Oh when you unloosening something you are really tightening it. 🤣 Thanks for the video! This is going to be my next shop toy! 😁🛫

Can you make a follow up video? How is it doing after half a year of use?

I just ordered the S380CPS model. Can't wait to use it. One quick question. Didn't your model come with the slip on plate to cut square tube on it's edges instead of laying it flat. With the model I'm getting I thought Evolution recommended it ?

FYI you use attachment for cutting square stock on diamond pattern not straight it saves on blade than cutting straight across. which dulls blade faster.

How square the cuts were? I heard the Evolution Power Tools R355CPS cuts are not square due to the thin back plate that twist when tightened.

ONDE POSSO COMPRAR AQUI NO BRASIL? AQUELE ABRAÇO. ADOREI ESSA MAQUINA.

Just picked one up. Liked your video. How is it running for you still?

Hello, in case of a broken vise, where can you buy the spare parts?

RPM AND KW FOR THE CHOP SAW?

740 does you base flex when cutting?

Will it cut 6” flat bar?

I hope more than 500 cuts.. did that this weekend.

Nice. Enjoy it, its well worth it. Free swag. Lol.

Im on an apprentice budget 😅 what do you recommend in their line or anyone else to cut through 1,2 thick inch plates? Grinder for me at least is really time consuming and sometimes faulty (I’m sure it’s operator error) budget is 100$ 😅 trying to take my vert welders test. I’ve been recommended skilsaw, circular saw etc. Any suggestions I would appreciate it 💪🏼 also you gonna need the rest of that scrap? 👀 lol thanks man!

reminds me of bob moffat

Where did you purchase the saw from?

Is the base fully cast?

7:25, both saws can't fit there ?

What is about blade lifetime? In German amazon (I am from Austria) many people wrote critics about the blade... But most of them are related to the stainless steel blade not to the mild steel. I need a saw, actually I want exactly this one, but the thing with the blades let me tend to a band saw (femi)

How do I get evolution to send me a saw and some metal?

Is that as loud as I think it is, because that sounds fuck all load!

The way that square tube was moving around after being cut and not being supported you are asking for trouble.

Just opened mine up, not impressed with the vibration and chatter. Anyone else have this problem?

hello. could you please check emial? Thank you so much.

Little overkill on the sound effects bro

I just bought a new blade on Amazon for $62

Братааан,хде чалился😂

Something i cant stand about seeing guys wearing lates gloves. Screams im a sissy boy