Expedition Console Swap into F-150

Подписаться 1,4 тыс.

Просмотров 12 тыс.

50% 1

Swapping the center console from an Expedition into an F-150 is a popular mod, particularly amongst Lightning owners, but this swap can be done on other trucks from 1997-early 2004 as well!
Sponsors and Discounts:
Auxito LED Lighting- www.auxito.com/i99tRBdRorbuf
Discount 15%- GOOSE15
Shine Armour Car Detailing and Protection- www.shinearmor.com?sca_ref=4446668.PhdU6ozs4F
Discount 20%- GAW20
Seat Pan: YL3Z-1563100-BB
Seat Bracket: F65Z-1561709-CAJ NOTE: This part has been discontinued by Ford. You can try eBay to see if someone is selling one, but your best bet is to just buy an entire Expedition passenger seat. I bought mine from LQK pick-your-part and it was about $35. So not only did it have everything I needed, but it was way less expensive.
Seat Slider Lever: YL3Z-15603A86-BAA
Console Front Floor Bracket: F75Z-78045B32-AA
Console Rear Floor Bracket: F75Z-78045B34-AB NOTE: This is another example where you'd be better off trying to get these with the center console. I also got these from LKQ, and they may not have even charged me for them.
Forum Write-Up: www.svtperformance.com/thread...
Clean Cause Link: www.cleancause.com (Discount no longer available. Sorry!)
Foam Cushioning: www.hobbylobby.com/Fabric-Sew...
Paint
Dark Graphite: lmr.com/item/MET-FV50DL/99-04...
Medium Graphite: lmr.com/item/MET-FV50L/99-04-...
Black: lmr.com/item/MET-FV51L/99-04-...
Chapters:
0:00-0:15 Intro
0:16-1:15 Important Notes
1:16-2:02 Console Overview
2:03-6:23 Bracket Mounting and Hole Tapping Overview
6:24-8:36 Console Mounting Overview
8:37- 12:50 Seat Disassembly and Cutting
12:51-16:36 Seat Recovering and Reassembly
16:37- 17:17 Final Review
17:18-17:57 Outro

Авто/Мото

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@jordanjohnson5784 Год назад

Nice video..very helpful. I just bought a 10th gen F-150 and I'm excited to get it all nice and clean. Already got new headlights and headunit. Had to replace the door lock motors. And I did a paint correction, it looks great. These are such nice trucks. Appreciate you!! 💯

@GooseAutoWorks Год назад

Thanks for all the kind words, and good luck in your project endeavors!

@jasong712 Год назад

That’s a great write up man!

@GooseAutoWorks Год назад

Thanks, I appreciate it! Doin’ what I can lol

@kykrazy6050 Год назад

Ford should have put these in at the factory!

@GooseAutoWorks Год назад

Yeah the console option over a bench seat would’ve been cool. Most people probably wouldn’t have done it in a single cab, but it’s definitely cooler lol.

@richardjones9422 20 дней назад

Great video,,I like how you changed things up. Very nice. What dud dud do with your old seat cover material, I've been looking for that pattern fir my 2003 stx .Looking forward to your next video.

@GooseAutoWorks 16 дней назад

Thanks, Man. I threw it out. I feel like a replacement seat cover has to be out there, but I haven’t really looked, myself.

@JF-li2nh Год назад

Nice project, sad to see there haven't been any updates on it in a while. I'm also doing a Lightning conversion with my manual 99 sport. I'm wondering if that front tray could be removed to allow space for a shifter.

@GooseAutoWorks Год назад

Thank you. I cracked a piston on it so I got a new (to me) truck. I still have this one, but time and money will need to align to do an engine swap into it.

@JF-li2nh Год назад

@@GooseAutoWorks that's too bad man. I hope it works out.

@mikehere5331 11 месяцев назад

I just got a pos 10th gen, could i just put the two bracket in where they go, then weld them when they're overtop where the tap circles are

@GooseAutoWorks 11 месяцев назад

I mean yeah, I guess so lol. Go for it!

@marcoabasolo3758 9 месяцев назад

Hi cool videos, when you did your electric windows on truck did you use single cab door panels or the extra cab ones?? And console and seats looks good 👍

@GooseAutoWorks 9 месяцев назад

Thanks, Man! I think it was a super cab truck, so technically 4 doors, but there were only switches for the front driver and passenger doors.

@marcoabasolo3758 9 месяцев назад

So i guess it was a extra cab the one with the small suicide doors for the rear, ?? Because supercrew are the 4 doors.

@GooseAutoWorks 9 месяцев назад

@marcoabasolo3758 Correct. Technically 4 doors, but the rear windows aren’t electric. From what I remember anyway. I don’t think there were any single cab trucks on the yard at the time, so it must’ve been a super cab, because the super crew would’ve had too many buttons. I mean you could still use the panel from a super crew, you’d just have extra holes to deal with assuming you’re working on a 2 door truck.

@marcoabasolo3758 9 месяцев назад

Thanks i appreciate the info

@GooseAutoWorks 9 месяцев назад

Absolutely! Thanks for watching! 😀

@islandsounz7480 Год назад

That narrow top console is for seats with armrest.

@GooseAutoWorks Год назад

All I could find at the time in good condition were narrow tops. A wide top would have been preferred, yes.

@swc7145 2 года назад

8:56 how did you remove the top of the seat from the support on the side of the console?

@GooseAutoWorks 2 года назад

It’s a ball and socket. If you look closely you can see that I used a ball joint separator fork to get it there and just pop it loose. To reinstall just line it up and give it a firm push to pop it back it place.

@jordanjohnson5784 Год назад

Did you put down any sound deadening under your carpet in the cab while you had it all out? It's obviously not entirely necessary, but it definitely can't hurt 👍🏼

@GooseAutoWorks Год назад

The carpet I ordered had deadening/insulation attached to it already.

@GooseAutoWorks Год назад

I actually filmed a video of doing the carpet as well, but decided it wasn’t enough meaningful content to be a stand alone video. But I still have the footage so I could always post it if I decided to.

@kirbywithagun0120 4 месяца назад

Hey I got a 60 40 bench seat in my 2003 F150 how'd you turn your passenger seat into a bucket?

@GooseAutoWorks 4 месяца назад

You’ve got to get a seat pan and bracket from an expedition or F150 that came with a center console. Then you have to cut the foam to remove the center seat of the bench. Your best bet is to buy an entire passenger seat from a junk yard or eBay because the brackets are discontinued. Check the video description for part numbers.

@Dirkadew Год назад

Hello quick question 🙋‍♂️ For the tap since it’s metric you would just need a m10 and m12 correct?? And does the depth matter or have a tap all the way through

@GooseAutoWorks Год назад

Thanks for the question, yes, the 10 and 12. And go all the way through. The holes are open to the outside of the cab.

@Dirkadew Год назад

@@GooseAutoWorks thank you. Also I don’t believe you mentioned the tap size for the seat. Any chance you remember?? Recently picked up a lightning driver seat and center console for 170. Might get a cut Lightning passenger side seat this weekend also so I’ll be able to start the swap.

@GooseAutoWorks Год назад

It should be the same 10x1.5 that the old bench seat used.

@Dirkadew Год назад

@@GooseAutoWorks I did the swap on Sunday. It took me 5-6 hours. I bought the harbor freight metric tap set and I highly recommend not to buy it. The 12x1.75 was impossible to tap. The wrench was so flimsy and kept slipping since it had little to no surface area making contact with the tap. I struggled an hour or two before I gave up and used a smaller bolt with a nut under the cab. I also had a small gap under the console but I bolted the brackets above the carpet so that might have something to do with it. I converted my driver seat from electric to manual. Seats went in smooth although I only have 3 bolts holding them down since I couldn’t tap the hole for the 4th bolt.

@GooseAutoWorks Год назад

I got my tap set of Amazon. It was cheap, but for the job done. Using oil or cutting lubricant helps. If you end up having to bolt something in the way you mentioned I would at least use some Grade 8 hardware if you didn’t already.

@stephensims6802 2 месяца назад

is this only for regular/extended cabs?

@GooseAutoWorks 2 месяца назад

You could do it on a crew cab too. This console came and seat pan came from an Expedition after all. The back of it even has climate control vents and there’s a blower motor inside. It not hooked up to anything in my case, but it’s there.

@stephenswader2140 2 года назад

Is that a narrow lid or wide lid console.

@GooseAutoWorks 2 года назад

This one is narrow. I probably would’ve liked the wider lid, but this is what was available at the time.

@jwkirshy 6 месяцев назад

What kind of paint did you use?

@GooseAutoWorks 6 месяцев назад

I just updated the description to include links. Here they are: Paint Dark Graphite: lmr.com/item/MET-FV50DL/99-04-Ford-Lightning-Dark-Graphite-Vinyl-Interior-Paint Medium Graphite: lmr.com/item/MET-FV50L/99-04-Ford-Lightning-Medium-Graphite-Vinyl-Interior-Paint Black: lmr.com/item/MET-FV51L/99-04-Ford-Lightning-Black-Vinyl-Interior-Paint

@kykrazy6050 5 месяцев назад

You just spray painted the console pieces?

@GooseAutoWorks 5 месяцев назад

Yes, using the SEM interior paint from LMR. I’ve got links on the description for the colors.