"ROKR 3D Pinball" has finally been completed.
It took a long time to complete because the entire piece was painted, rather than a plain piece. I thoroughly enjoyed the work.
00:00 ◆Demo play
00:54 ◆Introduction of kit contents
02:44 ◆About the ROKR brand
04:19 ◆About price and target audience
05:47 ◆About coloring
07:23 ◆Production points and precautions
13:16 ◆Game rule explanation and power supply
18:00 ◆Recommendation for homemade pinball
18:48 ◆Demo play
Size 27.5 x 47.5 x 28 cm 3.54 kg
Manufacturer recommended age: 14 years or older
Reference price: ¥30,000
◆Introduction of kit contents
The product arrived in a large cardboard box. The package contains a lot of parts.
It also includes laser-cut plywood, electronic parts, plastic parts, screws, etc., as well as wrenches and special tools for cutting parts, double-sided tape, and special Sellotape.
Also, parts that are easy to break during construction and small parts that are easy to lose are excluded, so you can rest assured.
It is equipped with a full-fledged electromagnetic solenoid bumper, flashlight, sound effects, background music, and of course a score counting function, so I think even pinball enthusiasts will enjoy it. This is different from just a 3D puzzle model. I think this is the best kit model in pinball history.
With Amazon, you can purchase directly from the manufacturer, so you can rest assured of after-sales service. If you lose or break a part, you can still order it.
ROKR 3D Pinball Machine
amzn.to/42bIbCF
◆About coloring
Do you want to do bare-knit in a bare state? Shall I color it? I'm a bit confused, but I recommend coloring because it allows you to express your originality. Let's make one original pinball in the world.
There is an official ROKR fan group on Facebook, and there are various examples of works, so please refer to it.
Facebook “ROKR Official Fans Group”
/ 511987809211616
◆Production points and precautions
The instructions are only in English, but the part numbers, detailed illustrations, and markings on the front and back are clearly shown, so if you follow the steps in the instructions, you should be able to assemble it without any problems.
It's no good if you try to get ahead of yourself when assembling things, and there is an order to assembling things. It's easy at the beginning, but gradually becomes more difficult. I will explain some of the things I had difficulty with and points that need attention.
・Assembling flexible LEDs
The LED is on a flexible board. Be careful of the direction in which you bend the LED, as it is easy to get caught when passing it through narrow areas.
The double-sided tape that comes with it is a little weak, so if you mark it with rubber adhesive in a few places, it will be easier to make adjustments later. Particular care must be taken when assembling the LEDs on both sides. Since the direction of illumination is specified, it is necessary to twist it in the middle. Please refer to the assembly video on Rokr's official RU-vid.
ROKR Pinball EG01 Assemble Step6
• ROKR Pinball EG01 Asse...
ROKR Pinball EG01 Assemble Step12-1
• ROKR Pinball EG01 Asse...
ROKR Pinball EG01 Assemble Step12-2
• ROKR Pinball EG01 Asse...
・Assembling the flipper
The left and right parts are slightly different, so be careful not to mix them up.
At first, I didn't understand the logic of the operation, so I checked it many times and was worried.
If you assemble it in the correct order, it will move with the screw that stops the fulcrum at the end.
If you assemble it according to the instructions, it will definitely work.
・Assembling the lamp plane
If you put it together properly, it will fit perfectly. If you don't get hooked, something may be wrong. The precision of the parts is high, so no special adhesive is required. I assembled it temporarily, then took it apart and colored it.
If you paint it, the painted surface will harden and it may be difficult to fit into the joint. Adjustments may be necessary. Adjustments are necessary, especially when using hardening varnish. Be careful not to attach and remove parts too many times as this will weaken the bond.
・Assembling the side panel
If you color it, it won't fit unless you do some work in advance, so you need to be careful.
It was difficult to insert all the parts correctly. Assemble carefully and don't rush.
・Electronic circuit assembly
It is necessary to connect many wires to the electronic circuit on the back. If you connect the wires incorrectly, it may break, so be careful. Care must also be taken when handling sensors with small bases.
There are many similar 2- and 3-core sockets, so be sure to check the instructions carefully to avoid making mistakes in connection. The socket also has a top and bottom direction, so carefully compare the directions before inserting.
#ROKR #ROBOTIME #PINBALL #DIY
#Homemade #Craft #Pinball #Pinball machine #3D puzzle
22 июл 2024