F150 12" Screen Swap! CHEAP! 

Great video. Not a bunch of bs and very informative. Keep up the good work.

Great Video, I would love to do this upgrade on my 23 F150 STX.. Thank you for sharing this..

When you do the fuse jumpers I had a wiring guy I don't know what else to call him he does entertainment install he said never go higher than the fuse that you pull out of the fues box you want to be equal or less and he explained why because if there is a short with your aftermarket system that fuse would blow before the factory one keeping your factory components safe but this was a pretty sweet

That boy almost at 10k! Get us out the hood my boy😂👏👏

I love that your sharing a really cool hack. If you can take a little constructive criticism though - PLEASE put a towel or cloth or something down when you're working on stuff. When you had your old heater control panel upside down on your console and were monkeying with all the plugs and bolts - it was really ratcheting my OCD as the panels were mashing against each other and sliding all over the place. ;)

Just curious, what is the website that sells the whole 12” unit you talked about in Michigan

Thank u

Hey man love the video do you know if I can do this swap in a 2018 raptor?

page is missing for the link on the bottom plastic piece

Any issues with keeping the 8” APIM? Some people have said they had issues until they swapped to the (12” APIM). Awesome video! Gathering the parts to do the swap!

Have you ever thought about installing a push to start system?

Hey! Question, is the pin you are having to modify and other parts for installing the Sync 4? I just checked my 21 STX and it has Sync 4 already, would i be able to just plug in that pin without modding it? Would that also apply to any other parts? (First time seriously upgrading so just wanted to double check before i fully committed)

Do you need forscan for the swap?

Hey man what’s the part number for the bottom piece ?

Now that it's been awhile, how's it holding up? Any issues?

Where can we buy the Radio parts?

The screen looks way nicer than the stock one. They are way clearer and more user friendly with CarPlay. Side note: clean your garage habibi 😂

I have a 2021 stx. Since day 1, the backup camera has sucked, it has 360 cameras. It lags badly and the resolution is terrible. Did you suffer from any of this? And did the 12” screen fix any of it?

Can you document a little more about where to source all the cables?

Where is the link for the parts

Planning to restock the fuse adapters? Planning to do it this way. Thank you for the video brotha! Edit: Saw you had them listed. Appreciate it brotha! Will update you when I have it done. Do you have the part number for the center seat bezel instead of the center console one?

What about forscan programming after it’s installed?

Do you know if is the same thing to do on a 2023 f250?

Any chance you could post the part # for the lower trim without a centre console.

Did you have to have the screen programmed at a ford dealership or did the wiring harness take care of that?

Thanks for the insights into infotainment, I am working on installing a 12" screen in my 2019 Ford edge, sync 4. I have learnt a lot from you. My greatest worry was on the harness and plugs. You mind giving ideas outside F150 trucks?

Hey Shaun. I did all as you did on the video, I checked both wires and they have 12v but the screen does not turn on. I am thinking I got a bad screen. Is there any other thing you did other than what you showed on the video?

Are there any options for my 2020 lariat f150?

You need to do your steering wheel😀

Does your back up camera work?

Which is the company in Michigan?

Followed these steps and I am having an issue. Sometimes the screen powers on, sometimes it doesn't. Sometimes the screen is responsive to touch sometimes its not. It will also randomly go black. Any suggestions?

So you put both grounds together?

Hi Shaun, just wondering how it’s still working. I made the swap today and the screen will stay on about 5 minutes. Reset doesn’t work but unplugging will for another 5 minutes or so. Also, screen shows the native 12” layout instead of the 8” format. Any ideas on why the screen is shutting off?

Do you know if this will work on the 2018 generation?

Screen link is broken

I bought everything new oem. Didn't work! Im a master technician did it exactly as you said. Cant return any of the parts either. Sucks!

Does your screen stay on while the truck is is accessory mode?

Great video! Can you share where to buy the screen?

Hey Shaun I followed everything down to the T! My issue is the screen powered on for a second and now will not power on and I swapped fuses and it did the same thing.powered on to nothing.. Do I need bigger fuses?

Where can I purchase the screen?

Planning to do digital dash? I’d love to change mine

I did this and it works but every now and then then the screen will go dark then come back on. I had it go black and I had to cut it off and back on to get it to come back on. Have you had this issue?

Hi Nice and smooth explation I did everything you said but the screen it didn't work 😭😭😭 I thought something wrong with the screen i tryed my friend screen and it won't work as well Please i need your support 🙏, if there anything i miss ?

I can heart that V8

Cheap? Must have fun money. I thought about doing this but here's why i wont: 1) cost 2) time for a diy 3) no advantage for a larger screen as its only more surface area but functionality remains almost unchanged(only thing i can think of is gps perhaps but who uses factory gps anyways). If it was possible to install an aftermarket radio(its a dying art im afraid) on these trucks, that would warrant the change and price.

🤣🤣🤣🤣🤣too much crap just buy a xlt or a lariat 🤦🏻‍♂️