Тёмный

Fabricating CUSTOM 3 Link for my V8 Toyota (with  

Dirt Garage
Подписаться 48 тыс.
Просмотров 5 тыс.
50% 1

Back at work creating a custom 3 link suspension system for my 1989 Toyota Pickup with the 1UZ V8 Swap! We visit Ethan from ‪@GrindHardPlumbingCo‬ and use his fancy Arc Droid to pump out some metal. Plus we are joined by ‪@JustinTBraun‬ and ‪@thedirtheadshed‬
Support Dirt Garage by purchasing our Merch! - www.dirtgarage.ca
Brought to you by @ Alpine Toyota - alpinetoyota.com
INSTAGRAM - / dirt_garage
Get 10% OFF Afraid Knot Ropes with my discount code "dirtgarage"
www.afraidknotr...
My 2020 OFFROAD Gear Kit / Recommendations: USA Affiliate Links
Lunchbox Locker: amzn.to/34lDTfI
Smittybilt Compressor: amzn.to/2vhwEqm
Tire Deflator Tool: amzn.to/2SwmbPO
Smittybilt Winch: amzn.to/2HbKP2Y
Recovery Rope: amzn.to/39om3Ze
Soft Shackle: amzn.to/3bnRg0t
Hard Shackle: amzn.to/39ouyDA
Recovery Hitch: hamzn.to/2SeE6LN
CANADIAN Amazon Affiliate Links:
Smittybilt Compressor: amzn.to/35DcvY3
Tire Deflator Tool: amzn.to/2QBWPQA
Smittybilt Winch: amzn.to/35CBOJO
Recovery Rope: amzn.to/2s9qRlj
Soft Shackle: amzn.to/2R4j5Bx
Hard Shackle: amzn.to/39QXpl3
Recovery Hitch: amzn.to/306WyIL
Music Licensed @ Artlist
Find music for your videos on Artlist! artlist.io/Cli...
My 1989 Toyota Pickup Build: • My DREAM Toyota Build!...
- 1UZ-FE V8 Swap
- Manual Swap
- Dual Transfer Cases 2.23 x 4.7
- Solid Axle Swap / SAS
- Lunchbox Rear, E-Locker Front
- OME Rear Springs & Tundra shackles
- Auxbeam Headlights: shrsl.com/38hjx
- 37x12.5r17 Toyo MT Tires
Camera Gear Used To Make This Video:
- Camera: amzn.to/36C4dkI
- Microphone: amzn.to/2QDkIaB
- Tripod: amzn.to/2sdCkR0
- Gimble: amzn.to/2FyndVf
Business contact: Dirt.Garage@outlook.com

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 41   
@TheDejectedArtist
@TheDejectedArtist 9 месяцев назад
Thats wild you were able to hangout with other gear heads and start your 3-link. Even had an appearance of your co-host. Never lose your infectious optimism.
@4xhoser
@4xhoser 9 месяцев назад
Stoked on this build! And seeing Grindhard, Dirthead Dave, and Justin Braun! Love those guys 🤘🇨🇦
@Andy_C_aka_Cliff_McCrawl
@Andy_C_aka_Cliff_McCrawl 9 месяцев назад
Sweet colab! Three of my favorite channels!
@Andy_C_aka_Cliff_McCrawl
@Andy_C_aka_Cliff_McCrawl 9 месяцев назад
Hexagons are rad though. Bees and everyone that does cad loves them 😂
@BruceCookfmx
@BruceCookfmx 9 месяцев назад
Sweet! Looking good buddy. Good group of dudes too.
@DirtGarage
@DirtGarage 9 месяцев назад
Thanks dude!
@TyphoidSnaily
@TyphoidSnaily Месяц назад
That Crossmember link setup is badass!! Great work!! Honestly you could sell that Crossmember and Link mount setup as a kit by itself and i KNOW people will buy it!!
@nemesis851_
@nemesis851_ 9 месяцев назад
All that money lost changing your design mid-way thru.... kidding. Cardboard is the best, I've also used wood for some stuff
@OhWizzer
@OhWizzer 9 месяцев назад
Idk why, but i feel like I've seen you irl before, but know i haven't, you live 12 hours away from me haha
@JustinTBraun
@JustinTBraun 9 месяцев назад
Thing is turning out great! 🤘🤘
@thethepete731
@thethepete731 9 месяцев назад
Ok, so you being there was sweet, but Dave? Wtf. That's so rad.
@jasonh4167
@jasonh4167 9 месяцев назад
Nice utilization of CAD (cardboard aided design) clint🤘.
@jameshall4385
@jameshall4385 9 месяцев назад
Dirt head dave is awesome. That cross member is going to be the bomb. That cardboard template probably took longer to build then the metal one
@marksetters931
@marksetters931 9 месяцев назад
This maybe a dumb question but are you not able to make the lower link mount and the steering bump all in one? that way you could get rid of the steering stop.
@Ashoud_Anobetah
@Ashoud_Anobetah 9 месяцев назад
13:12 maple syrup!!!!!!!!!!!!!!!!!!! hahah that was pretty cool!
@mikejensen-fogt4662
@mikejensen-fogt4662 9 месяцев назад
That's a damn nice looking crossmember man! i gotta get me one of those arcdroids lol
@nemesis851_
@nemesis851_ 9 месяцев назад
Bet it a few days that go by, before the perma-grin wears off, after seeing the guys
@SOLDADITO76
@SOLDADITO76 9 месяцев назад
Just for future reference, BudBuilt has a aftermarket crossmember plate made from 1/4 flat plate for single and dual transfer cases w/wo skid plate, and they will make the for vehicles with body lifts to tuck your drive train back up.
@DirtGarage
@DirtGarage 9 месяцев назад
I used to have a TG crossmember that was the same. Can't use it with my link setup I'm making.
@Desertquartz79
@Desertquartz79 9 месяцев назад
Thats whats up !! Looks Sweet now thats Custom !!
@bradcarroll5265
@bradcarroll5265 9 месяцев назад
Awesome to see Ethan and Dave in the video! Both dude build some awesome stuff.
@youtubeincel5812
@youtubeincel5812 9 месяцев назад
Why not go to a full size front axle while you're at it so you can stop breaking axles man
@DirtGarage
@DirtGarage 9 месяцев назад
Because I already have a truck with tons. RCVs will be a must on this.
@dlansburg2673
@dlansburg2673 9 месяцев назад
Cool to see other youers that I watch
@johnnybodangus2529
@johnnybodangus2529 9 месяцев назад
That is some serious cad! 😆👍
@wesleyfarina
@wesleyfarina 9 месяцев назад
Love the videos keep them coming I'm rebuilding my 81 K5 jimmy I'm working on the crossover steering and shackle flip can't wait too go for awheel.
@thonvuth809
@thonvuth809 9 месяцев назад
❤❤
@TheTreadLife_
@TheTreadLife_ 9 месяцев назад
I’m curious why you didn’t mount the upper to the pumpkin. I was able to mount mine there and still clear the oil pan on my 5vz swap, and my motor is SUPER low.
@DirtGarage
@DirtGarage 9 месяцев назад
Because I didn't want to package it with exhaust and drive shaft. Just easier to do it on the other side. No reason why I shouldn't 🤣
@TheTreadLife_
@TheTreadLife_ 9 месяцев назад
@@DirtGarage interested to see how it turns out! I’m running 14” coilovers with about 4” up and the rest down tucking 38s
@TheTreadLife_
@TheTreadLife_ 9 месяцев назад
@@DirtGarage I’m also just south of it in Coeur D Alene if you want to check it out and wheel sometime!
@DirtGarage
@DirtGarage 9 месяцев назад
@@TheTreadLife_ Yeah I'm doing 14s too. Hoping to squeeze as much up travel as possible, gonna make my engine mounts different now to to gain some room. Either way it'll be a huge upgrade from the 2" up travel I got with the leaf setup
@TheTreadLife_
@TheTreadLife_ 9 месяцев назад
@@DirtGarage let’s link up sometime! Just followed you on IG
@LittleMikeStarCraft
@LittleMikeStarCraft 9 месяцев назад
Nice to see you hanging with the Grindhard bois.
@Thexkidd
@Thexkidd 9 месяцев назад
You’re rad too Clint!
@DirtGarage
@DirtGarage 9 месяцев назад
Thanks!
@adrianjay1972
@adrianjay1972 9 месяцев назад
Right on! This is great! Can’t wait to see it come together!
@johnnykirkland611
@johnnykirkland611 9 месяцев назад
Awesome guys that was really cool 😎
@LittleMikeStarCraft
@LittleMikeStarCraft 9 месяцев назад
Is that Dave Chappel?
@DirtGarage
@DirtGarage 9 месяцев назад
Yup!
Далее
Crazy Off-Road Adventure | Rock Crawling
10:48
Просмотров 12 тыс.
CHEAP STAND ALONE ECU for 1UZ Swap!
15:01
Просмотров 8 тыс.
DAXSHAT!!! Avaz Oxun sahnada yeg'lab yubordi
10:46
Просмотров 489 тыс.
Restoring The ULTIMATE Rare Vise
24:45
Просмотров 38 тыс.
Fixing Toyota's Trash Suspension - Part 1
17:42
Просмотров 70 тыс.
Worlds First 6x6 Mini Truck Build!
41:45
Просмотров 1,4 млн
Super Duty E Locker Swap! (Sterling 10.5 / 10.25)
10:10
DIY WINCH BUMPER for UNDER $100
17:09
Просмотров 67 тыс.