Тёмный

fairmont 7 surge tank assembly and ramble 

Sloppy Mechanics
Подписаться 135 тыс.
Просмотров 6 тыс.
50% 1

moving a long with a few things at a time, prepping the surge tank, i really like this one. i bought the radium for my mustang and this one for the fairmont, and i have tosay i like this one better.
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
www.sloppymechanics.com/
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarage.com/)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeaterperformance.com/)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertuned.com/
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-motorsports.com/
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperformance.shop/)
Hughes Performance - (www.hughesperformance.com/)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo.com/shop/index.php)
Summit Racing LS (www.summitracing.com/)
Brian Tooley Racing (briantooleyracing.com/)
VS Racing (turbo4less.com/)
Warr Performance (warrperformance.com/)
ICT Billet (www.ictbillet.com/)

Авто/Мото

Опубликовано:

 

17 сен 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@TurboDog73TX
@TurboDog73TX 10 месяцев назад
You're not the only one that cried to Holley for 6L trans support.. I was like; "it's 2023 FFS, why can't I have a damn 6 speed auto controlled by My Terminator X ?"
@andymcdo
@andymcdo 10 месяцев назад
Man that filter is like the filter she told you not to worry about
@cameron878
@cameron878 10 месяцев назад
Don't give me the credit, Chris built that one. LOL
@Burndown
@Burndown 10 месяцев назад
When your brain fires and makes you walk around the car for no reason 🤣. I can relate.
@Jonny_trans
@Jonny_trans 10 месяцев назад
That surge tank is great. It uses space much more effectively than the radium unit.
@ClarksAutoAndPerformance
@ClarksAutoAndPerformance 10 месяцев назад
I use PEX clamps for my rubber fuel lines. No chance of them backing off or getting loose.
@BlaserBuilds
@BlaserBuilds 10 месяцев назад
Air hammer on the tunnel is mint... quick work of the soft areas.
@davidthurman2267
@davidthurman2267 10 месяцев назад
The knowledge you drop is priceless man. Appreciate it more than you know
@ColbyJohnson
@ColbyJohnson 10 месяцев назад
Highly recommend the chief long barrel air hammer from HF. It's a beast
@AGuysGarage
@AGuysGarage 10 месяцев назад
Good to see you cranking out videos again I miss you. cranking out is a phrase that I am using very loosely anyway good to see you again dude
@brettbaker9350
@brettbaker9350 10 месяцев назад
I like the strapping point on the fuel cell
@IWS1320
@IWS1320 10 месяцев назад
I can’t wait to see the fuel system come together. I love plumbing cars
@takeit2-11
@takeit2-11 10 месяцев назад
Unrelated to this video... but have you looked into those 19in brushless spal fans that came on 2016 and up SS Camaros. They have two big power wires and then a PWM signal wire for the ECU, the brushless controller is built in, they are like 800W and you can find them cheap at the junkyard... would be a cool video. I know you hate it when things overheat
@matthewdeluca9248
@matthewdeluca9248 10 месяцев назад
I used that nylon fuel line to connect my Walbro to my sender. No clamps, no leaks. Not the easiest or most forgiving stuff to work with, but so far so good!
@Sleeperdude
@Sleeperdude 10 месяцев назад
Super fancy
@cameron878
@cameron878 10 месяцев назад
I've got the chief air hammer from harbor freight, it's the truth
@HeadFlowInc
@HeadFlowInc 10 месяцев назад
1. Is the hose e85 rated? 2. Better to use Fuel Injection clamps.
@silentbravo
@silentbravo 10 месяцев назад
whoa now... we have to keep some things sloppy still
@masoncampos7043
@masoncampos7043 2 месяца назад
Let's be real he's going to pull all that out and change things long before that fuel line breaks down anyway.. love the head porting videos btw!
@89notch79
@89notch79 10 месяцев назад
I could have missed it, but you’re going to use a 10 micron before injectors, not a 100 right?
@SloppyMechanics
@SloppyMechanics 10 месяцев назад
Yes
@thejalenpskater1
@thejalenpskater1 8 месяцев назад
Not sure about hf air hammers but they could be great.. I have never had a chance to test one. But I have a Chicago pneumatic cp714 the little one(717) is the big daddy. But the small one has a super verbal trigger. Highly recommend if you do have a little money to blow on one
@beecj0
@beecj0 10 месяцев назад
Thanks for the update!
@phillipbatchelor7470
@phillipbatchelor7470 10 месяцев назад
Have at beating the trans tunnel into submission but that trans is bigger than you think. We did one on a g-body and ended up cutting the tunnel out. we weren’t even worried about tucking it up because the car was on 24s so ground clearance wasn’t an issue. It’s not that it’s THAT big it’s just how large it is allllll the way down the trans.
@SloppyMechanics
@SloppyMechanics 10 месяцев назад
I’ve done a 5.3 and 6l80 in a Ltd fox previously it’s not bad
@phillipbatchelor7470
@phillipbatchelor7470 10 месяцев назад
@@SloppyMechanics doh, I’ll go back under my rock now. 😅👍
@juicebox853
@juicebox853 10 месяцев назад
Quality looking unit. I am building a 4th gen Fbody and the fuel tanks are hard to work with on those. Also, since there is no trunk running a fuel cell is a bit sketchy.
@wobblysauce
@wobblysauce 10 месяцев назад
Ah the classic, tappy tap tap.
@Labergemusic
@Labergemusic 10 месяцев назад
Well dang, it's cool to see you say it's "your dream" to use the 6l80. I hope my 6l90 works when I get it running lol.
@Labergemusic
@Labergemusic 10 месяцев назад
Oh my god, I haven't looked in so long now Holley supports my trans??? Oh my god I need to sell everything I own of value.
@scrapmetal_sleepers
@scrapmetal_sleepers 10 месяцев назад
I wholeheartedly believe your 6l80 will do fine with a power adder using the holley control. The pcs was junk. Let me know if you want to borrow my homework for the virtual torque table and tm table.
@cameron878
@cameron878 10 месяцев назад
Damnit Bobby
@bigfoot355
@bigfoot355 10 месяцев назад
Watching
@ClarksAutoAndPerformance
@ClarksAutoAndPerformance 10 месяцев назад
Isn't it supposed to be 10 micron after the pump?
@polarischevy05
@polarischevy05 10 месяцев назад
Link for fuel filter?
@hoost3056
@hoost3056 10 месяцев назад
Uh oh, F7 is going Shiny Boi!!!!
@keithschuessler3435
@keithschuessler3435 10 месяцев назад
With the surge tank mounted at the rear, would it make any sense to weld a section of a steel oil pan to the tank and put pump pickups at the bottom of the sump instead of using a separate surge tank?
@TheBrokenLife
@TheBrokenLife 10 месяцев назад
Ahhhh... This had double the minimum required amount of "ramble". It was a good Monday. 😆
@BEANS-O-MATICtransmissions
@BEANS-O-MATICtransmissions 10 месяцев назад
Are you PWM'ing the pumps at the same time or you're going to stage them? Does that model pump have internal check valves? (Not the 044) Once you use fuel injection hose clamps, you won't use the worm ones anymore. They clamp better and don't cut the hose as you tighten them.
@NorthofELangling
@NorthofELangling 10 месяцев назад
Hey Matt, where did you find that fuel tank, looking to do the same setup on my fox body. Thanks a lot
@BlaserBuilds
@BlaserBuilds 10 месяцев назад
Sweet thingamajig.
@2hacksinashack
@2hacksinashack 10 месяцев назад
Do you run just the 100 micron filter inline before the fuel rails? Seen lots of other people who say you need a 10 micron. Or are they just trying to sell us their products?
@justfoundmy10mm
@justfoundmy10mm 10 месяцев назад
Any reason to not put the surge tank under the hood?
@Carbonneutraldrop
@Carbonneutraldrop 10 месяцев назад
Ever state your goals for this fancy mechanic build?
@chipcurrey653
@chipcurrey653 10 месяцев назад
What's the advantage to all this complexity versus just clamping 2 or 3 walbros on your stock pickup?
@BEANS-O-MATICtransmissions
@BEANS-O-MATICtransmissions 10 месяцев назад
No starvation issues all the way down to E
@brandonpylant5764
@brandonpylant5764 10 месяцев назад
Where is that solid state relay from
@genewestbrook6694
@genewestbrook6694 10 месяцев назад
I'd like to know also.
@IWS1320
@IWS1320 10 месяцев назад
I make that relay. 😊
@_the_Chad_
@_the_Chad_ 10 месяцев назад
Whose pwm relay is that?
@IWS1320
@IWS1320 10 месяцев назад
I make it 😊
@robwigglezz944
@robwigglezz944 10 месяцев назад
I like shiny parts
@levibaker9692
@levibaker9692 10 месяцев назад
B/A? You Stole That Frome me. My Attourneys will be in touch with you Very Soon.
@RICHCREWSPLASHSET
@RICHCREWSPLASHSET Месяц назад
Unless u have a nascar this over kill 450 is 750 hp 2 1500 plus your stock fuel pump which normally is around 400-600 that’s already 2100 who tf is pushing 2100hp+ on the road to add an extra 3rd one is just a waste
Далее
DW Modular Surge Tank Install
2:54
Просмотров 6 тыс.
The lightweights ended Round One with a BANG 💪
00:10
Hayabusa Engine!
1:07
Просмотров 30 тыс.
Crusty 4.8 prep for new edge
5:33
Просмотров 388
Fairmont 7 ly6 6l80e torq storm blower update 2023 end
13:41
Osias fuel surge tank
7:53
Просмотров 320
gold lite - the new micro mini ms3
5:05
Просмотров 11 тыс.
Бмв сгорела , это нормально?
1:01