Thanks for posting. I'm trying to rebuild the oil pump on my Farmall 100. Removed the 2 bolts on the side of the block, but could not remove the pump I'll try a little more down pressure. There is supposed to be .0035" to .006 clearance on the gears when re-assembled. Obviously the PO did not allow that clearance when they put it back together with silicone. Thanks again, Ken
@@grumpyshopteacher25 I finished it yesterday, when the gasket came in. I actually wound up using a 1X2" piece of board and hitting that with a 3# dead blow hammer driving down at an angle several times before it came loose. Good news is now I've at least got 1/4 gauge oil pressure. Before it was on 0.