FAUX CONCRETE INDUSTRIAL PAINT EFFECT - HOW TO CREATE DIY - STEP BY STEP GUIDE 

Appreciate the video but you didn’t mention what kind of paint you used or if your primed and with what or what colours?

The best faux finish look I've seen on here

Amazing video!!! Fantastic tips.

Hey, can I please ask did you mix the two colours together or did you do a layer of one colour then a layer of the other? Thank you so much it looks amazing! :)

This was super helpful man thank you so much!

Great result! Do you have a video for getting this effect on a textured surface?

Brilliant video. thanks!

Hey, grwat video rhanks so mucn for making. In the final stage where you are smoothing wirh the trowel it sounds like you are doing something to the trowel like spraying it with water or something else?

This is amazing. Please come do my place. I'll pay, I live in LA

It turned out well, very nicely done. I would turn off the irritating music, and also show the finished wall in more detail. Mention your paint. This is known as Venetian Plaster in the US. Its a technique for achieving an aged patina on a wall or special decorative effects. It is Latex house paint (acrylic not rubber) mixed with slaked limestone or marble dust to thicken it. You can roller brush it on or use a spatula. Let dry. Apply a second contrasting paint sponged over, then sand gently with very 320 or 400 sandpaper to give it a velour finish in the crevices, then use a flat metal trowel to 'polish' the ridges that stick out of the hand plastered texture. This gives a shiny look to the flattened ridges, contrasting with the velvety lower areas. Additionally, the second color gives it depth. E.g. Primary color is yellow ochre, secondary color is burnt orange very lightly dabbed here and there with a sponge for aging effect. The marble dust in the paint gives off a nice polish and texture. The other effects to use are a leaf skeleton, or fish spine skeleton that you press into the fresh paint to get a decorative motif all over. If you do this, limit to a small wall or its too much. You can also use a hand trowel and get a lot of 'movement' in the application. You can apply this to wood, drywall, or any absorbent surface. Cracks can easily be filled in, if they develop from house settling.

Hi mate, Great video, could you just confirm the paint you were using? Does it need to be of a special finish or thickness? Or if you could direct me in what I should be looking for on Wickes or b&q . Many thanks

That look great mate, is it the dark or light craig and rose paint?

Hi mate im looking to do something like this on my stair treads would this paint work if sealed afterwards many thanks

Hi craig not sure if you will answer this . Im a bit behind since you posted it. Is this the the same paint colour on all 3 coats . I noticed you said its concrete pale elements and also onyx pale elements so im guessing youve done a coat of each colour. ?

What paint are you using?

pollyesathanam mayer😍😍😍😍🥰

What color and type of paint ?

Is going to look like Venetian plaster?

Do you ever seal it after you're finished?

So why can't you just put a thin base coat on and just do the effect on 2nd coat ? Oh right I got texture on texture , iam so not with it lol

Hi, amazing technique!!! what is the color of the paint?

You aren’t describing what kind of paint you’re using.

Looks nice, what paint did you use ?

waste of time watching this video, no mention brand of paint disappointing?

what brand of paint?