FEEDING THE FOX! / SVE High Performance Fuel System Install 

You are making me want to get out there and get this fuel system installed on my TwinTurbo car, Guess I should buy the fuel system first LOL.. keep up the good work brother. Killing it as always

I like the attention to detail but still making it user friendly. Looks like a great setup for these older cars

Just ordered the same kit lets go! 🤘🏻awesome video as always thanks for your time and patients with these videos!

Great video. I haven’t had to chance to purchase this kit yet but keeping an eye out until it’s back in stock. Rewatched this video a few times but understood everything the first time. I got scared you wouldn’t show enough but you did a really good job with what to show and what not to but explained after. Good stuff champ ❤

When the o ring popped 😱 Glad you worked around it though

That's some good stuff right there. I can't wait to see you blow the doors off of Andrew's black car. Good to see him back and siting around as always. 😄 🤣

I think you did an excellent job filming that. Great video man!!

Sweet! Glad you got to address your fuel issue like you’ve been wanting do. 👍

Ordered my kit today! Can't wait to add this to my blower setup

Very nice setup! Great video BREW2L.

Looks like a sweet kit,hopefully it's the hitting ticket!Awesome job explaining everything for average person like myself!👈💯

I'm liking the longer video, missing the old intro and outro though. Install looks good, nice job.

LOVE THE SHIRT BROTHER🙏😇💪😎👍🌎☮️🦊🐴♾️

Man Great Job! Glad to see an all in one kit finally come out. LMR FTW. Definitely a must have kit for my build soon.

Looks like a great kit, Love LMR and all those guys continue to do for us ...

Great install & description video brother! Keep up the awesome work man! 👊🏻

Sounds good and that color is amazing 😍

I ALWAYS APPRECIATE YAWLS CONTENT🙏😇

Nice video!! Had a O ring blow out on my car, thought it was going to burn to the ground!!

Liking the fuel system. It’s a sad time because I just bought a 2017 Coyote 6 speed manual mustang which means I’ll be slowing down on my fox body so I’ll have to live the fox life through you guys on RU-vid

Great video and nice kit LMR. Also The 65 would look nice painted calypso.

Thanks for the video. That kit makes installation so much easier than 500 trips to the parts store. Clean work and it works. Loved to hear the car run. By the way, what header leak? Sounds like beautiful music to me. Thanks again and I really enjoyed how you showed what was done without a long video.

Looks like a great success, well put together LMR kit a awesome job guys. Great job to you and Andrew on the install, she is sounding sweet, should have done a lot of more revvs so you can that look from the neighbors, because it's not too loud.

Even when ur slacking u always have great content. When I say to much u dont reply. So with that, mad love and respect bruh-bruh!🍺

Great install video, bro

Great video! It never fails... there's always got to be that one little thing. This time, a ten cent o-ring, lol.

damn thats going to run like a beast after its done ..that leak in the pump hose hurts bad man ......seen that a million times...lol

$1500 is the price if anyone was curious. Also for HP Rating it states HORSEPOWER RATINGS 800 Flywheel HP - Naturally Aspirated - 93 Octane Pump Gas 650 Flywheel HP - Forced Induction - 93 Octane Pump Gas 560 Flywheel HP - Naturally Aspirated - E85 455 Flywheel HP - Forced Induction - E85 * These ratings are just estimates and results may vary depending on your application. *

You all ain't got mosquitos down there? Wtf!!! Michigan summer night with the doors open and lights on is a nightmare!

Great video, but i was always told not to run fuel lines in the trans tunnel. in case the driveshaft goes

is getting stronger n stronger..

So basically if you have the pump and other components already you can get the lines and fittings unless you buy everything again..!!👊🏽👊🏽

Have you installed the AC harness yet for the Terminator X? If you haven’t would love to have a how to video on it as well.. 🙏🏼

Awesome stuff brother! 🇺🇸💪🏼

It might not support a ton of power but swap the 340 for a Walbro 450 and maybe go up one size on the regulator and it will get you really far. Like you said putting those fittings on the line is the worst part of the deal IMO.

Ready for mo powa baby!

I’ve seen at least one video where that same line blew in Calebs car. Seems like a common issue.

Hey brother- wondering if you can or will go over the install of the pump wiring harness upgrade for those of us that are already running large pumps but on oem wiring.

At 4:25 wondering what happen to your finger 😂

I’m in the middle of doing this fuel system kit and also have a terminator x setup. Does the aeromotive trigger wire run straight to the fuel pump wire from the terminator x?

I'd be doing a happy dance if I blew out that o-ring now..... rather than the next day on a test drive. That was a VERY fortunate failure!

excellent video again..is there a way without taking down your tank to see if there is power going to the pump ..I don't hear my fuel pump

Looking good Thanks for the video

I really appreciate the videos and im a fan. I have a 1993 5.0 all stock. 130k miles automatic. It recently started losing power drastically after 1st gear. 1st gear is normal with power then in 2nd it feels like a 4 cyl. No check engine light either. We changed the fuel filter, plugs wires cap rotor MAF and Throttl position. Any idea what to go to next?? Rpms are normal just No power after 1st. Exhaust problem? Thank you in advance for any help from anyone.

No wiring upgrade for the pump? That's definitely one of those, while I'm in there, checklist items.

Does this guy not like anything from LMR? You guys see all the swag everywhere, he is really going for the sponsorship grab. Just remember a glowing review is a paid review

Are you still using the inertia switch?

be careful with that fuel filter , i would use a magna fuel filter or aeromotive filter they are hundred bucks but good sercurity

I have a stocked 88 LX 5.0 that has been sitting for 8+ years with fuel in it. I am replacing the fuel tank and its components. I am trying to decide whether to clean the stock fuel lines or replace them with the PFTE. Can the PFTE line be connected to the stocked fuel pump, or will it have to be replaced as you did here? I want to keep the stock configuration.

It’s been a couple years since this install. Any updates on the system? Are you still running it? Have you had any issues with those fittings on the fuel filter? I read someone else saying that they tend to vibrate loose. I’m getting ready to install those fittings on my car and wondering if I shouldn’t loctite them just in case and plan on just replacing them when it’s time to change the filter if they won’t come apart.

Please let me know ,who, feels more power ? Help the car?

did you put the return into the sump?

Unofficial tool of the Don,the ziptie

You gonna be running E85 on Calypso?

Im not trying to be a hater or anything but im super particular and paranoid when it comes to the fuel system and I have to say the whole kit is very poorly designed and a major fire hazard. Your definitely not passing tec at any NHRA track with this at all. The safety guidelines are clear and specific. You throw the driveshaft, fire... you pop something in the right front, fire not to mention with the on 3 kit your right over the downpipe. Now you have a vapor lock concern with the heat. Last thing major thing, your causing a restriction with the factory filter. You need a -8 line up and a -6 return. Simple with a -8 filter preferly ran on the drivers side on the outside of the subframe connector and then up on the inside of the frame rail to get it into the bay not the wheel well. Sorry bro. I really hope you reroute it all properly. If you need to taylor the lines its no big deal and I hope they are PTFE lines at least. Again no disrespect but I dont want to see anything bad happen.

This channel feel off , it’s all about expensive parts and no more entertaining budget builds..