very interesting you need to do an update as promised. A how to balancing and explanation of controls would be helpful. Thank you..Great job on your videos
Great review. Loved it. I'm sold on this. It has all the functions I need and like you don't need a touch screen. After all, I would only use a few functions on the gimbal, mainly follow mode and some pan and tilt. Great to find another reviewer from London.
This was the best review overall because you were the only one to speak about the app functions I was looking for all over RU-vid. Just subscribed and from now on I know where to come for a full review thing
Auto calibration gives you a workable setup in a matter of seconds. Different camera/lens combinations call for different motor settings. A Sony A7c with a Samyang 20mm f2.8 will need different power settings than an A7Riv with a Sony 24-105mm f4 G. Without auto calibration, every time you changed cameras/lenses, you'd have to go into the menus and fiddle with the settings. The time you save may mean getting the shot before the light goes.
Tbh I don’t know what is the correct way but over the years I had so many gimbals until balancing is like a second nature to me. All my video since this review is with my cannon EOSr attached to the SCORP c and balanced exactly the same way, works out well for me. It will never be perfectly balanced as sometimes I have the flip out screen on the side and when zoomed in the lens extend out front but the motors are strong enough to overcome minor imbalance like that. Hope that helps
My set up is balanced well so not much stress on the motor. I have zoom lens and flip screen and if I change any thing inc zoom I balance the camera again
My set up is balanced well so not much stress on the motor. I have zoom lens and flip screen and if I change any thing inc zoom I balance the camera again
That only happens to me when the camera is not balanced and it could not initiate calibration on start up. Use your finger tip to balance the camera and start the gimbal and see if it start up?
I'm having this problem. It boots but nearly immediately drops its head and goes into sleep mode. I have the camera well balanced and all three axis' locks open. On the struggle bus. Helpful video to see meanwhile, thank you.
Great, I watch this video to get a better understanding of the initial set up especially with the camera only to see you speed up that process and explain nothing!
So sorry for that, I skipped it partly because there are already step by step guide from the manufacturer web site. My video was really my experience of using interesting gadgets and not a technical know how. Thanks for your support 🙏
@@BCreviews I understand that, I was looking for something more descriptive than the manufacturer's video. Their angles were poor and one of the locks mentioned was behind another part. Oh well I had to go back and use it. It just took more time than it should have. IMO
My model works well when I hold with my hands, but starts vibrating when is laid on the table or standing on the tripod (it is accurately balanced). Any idea? Thanks
@@lucatomas Unfortunately, my gimbal also has vibrations. I balanced it carefully, unfortunately the vibrations are still felt even when I set the strength of all three motors to 1.
Thanks for the video bro, at around 20:30, you do a 360 around that mower. Can you tell me what settings you have the gimbal on to do that? I'm trying to do that exact shot with this gimbal and i cant get the camera to stay still. Is it on Pan and tilt?
Gimbal held upside down to get the low angle, default mode on which locks tilts and rotate. Walk circular around the mower keeping camera pointing at it.
Great Video! Thanks. Do you think there's a way I can mount a smart phone on this ? I only have a samsung galaxy S20 Ultra. And I love this Gimbal. Thanks
Possible, I only balance it how I use it with other gimbals, didn’t even read the instructions manual. Good thing is that the motor is strong with good tolerance and will overcome slight off balance etc. I built my own gimbal a few years back and understand the basic mechanics of it. My EOSR stays on it permanently now, it is my tripod stand even when I am filming in my studio on my bench as tripod head
Hi there! Very good review! I have two questions: 1.: can you turn it upside down, and use is while it hangs (for close to the ground shots) 2.: which is the max hight that a camera could have, while working with the gimbal? (i would use a small microphone on my canon m6)
Yes you can hold the gimbal upside down and it will work for low shots. There is around 14cm to 15cm between the base plate to the top of the arm when hanging upside down.
@@BCreviews Oh well... I will be waiting for that review. I am considering between the two. Both are strong (for m50 or m6 and a small ef m lens) and the same price. Can you make a comment or include in some way a comparism? ( i cannot find for the love of god a comparism between the two)
@@danielkovacs1172 First use and review for the mini with my Sony ZV1 will be out in a few minutes :) I have the R50 to play with this month so will be using the mini for that. So far I find both gimbal behave very much the same, for smaller camera and use outdoor I would choose the mini for sure due to the size as the C is a giant.
Hi, just received this same model today, really nice. I cannot figure out how to make this record by pushing the red button on the handle. I connected the cable from my USB-C to the bottom USB-C. I cannot get that to do anything. You can change the camera by connecting the cable to one of the bottom USB-C's. I do love that feature.. Do you know how to make it record using the red button on the handle?
@@BCreviews FeiyuTech Camera Stabilizer Gimbal Camera Functions Compatible Informations: Sony ZV-E10 SCORP C USB Control Function: Take Photo, Start/Stop Recording Video, Playback. This gimbal has zero instructions with it, only showing the description of everything on the gimbal, I think they feel you will look at every video out on RU-vid, which none of them show what the cables actually do and how to set the settings to get this camera to work with the gimbal. Thank you for your help. You have a great channel.
hi, i have a question do you have an issue at selfie mode from the trigger button, cause i hace that issues, when i tap 3 time to enter selfie mode t takes like 5 sec, and when i tap 3 time again to exit selfie mode sometime ther's no respons
Hey Benson, Got my FeiyuTech Scorp one however, my camera is EOS 6D, my problem is the connector/ cable from the camera to the gimbal. Is there any way?
Thank you for watching my video and I am sorry that I could not show you everything I did with the gimbal. There are lots of tutorials and instructions video online teaching how to use this gimbal including the official channel from the manufacturer etc. I could have used my go pro to record how I used it in my garden but as I am an amateur RU-vidr I managed to mess up that recording 😂. Thank you for watching and thank you for your support