I installed a Curtis Novak pickup on a friend's Stratocaster that I had previously refinished.
• Fender Mexico Stratoca...
The front and center pickups were installed with lace sensor pickups.
Then I replaced the pegs, filled the peg holes for replacement, made the back panel, replaced the frets, modified the fretboard, changed the fretboard R, made the nut, bent and rewired the calm, etc.
The Curtis Novak pickup looks like a humbucker, but it is a single coil pickup. The model is a Gold Foil: GT-V Vintage correct classic Tokyo Style Gold Foil.
www.curtisnova...
At first I didn't want to ask if I could put this pickup on... but I bought it. I bought this pickup.
Furthermore, the race sensor is combined with a race sensor...what will happen?
To be honest, I was worried about it, but I didn't feel comfortable with it. Is it blended? I think.
There's definitely a lo-fi feel to it, but it's there. I think it's possible.
But I wanted to use the round head screw because the mounting holes of the TOKYO pickup have a good hole for M3 screws.
But I couldn't find a good round head M3 screw, and the wood used to hold the Strat's screw is very thin.
So I made this part out of brass. I thought it would be a good idea because it would fit in nicely and I could make use of the lathe, lol.
Replacing the rotomatic type pegs with Crewson type pegs is a bit of a pain.
The conversion bushings make it a little easier, but I didn't want to do it this time, because I didn't want to. It's going to look a little different.
I took a method of filling the peg holes with maple.
Normally, I would have filled the holes with a round bar and re-drilled them later, but I took the method of drilling the holes in the round bar from the beginning. (I have a lathe, so I felt I could get better accuracy that way.)
Maple for easy round bars? I'm glad I bought a lathe so I could make it! I think.
The frets are Freedom's 07 Speedy.
The sound that the owner is looking for is the sound that looks good on the rhythm guitar or cutting, so I chose it.
The guitar that the owner can play is an SG, and when he played the SG after playing a Strat, he felt it was easier to play.
He felt it was easier to play when he played the Strat and the SG. So I changed the R on the fingerboard to 12R.
I was quite satisfied with the fretwork. Maybe it's my first time to do so.
I was able to reconfirm the accuracy of the fretboard correction and the accuracy of the fretboard R.
He also sent me a video of him playing the fretboard.
It's still difficult to confirm whether the lefty is completely playable or not.
The string height is set high, so we set it to a setting that we think is easy to play, and then the owner will have to check it for himself.
I wonder if this is what airplane instrumentation flight is like.
And the last song. It's an original composition by the owner of this guitar. I had it made!
I hope you enjoy it all the way through.
Thank you for your request.
Guitarist and BGMProject2 (Shunnosuke Kaneko) "Bar with Sherlock
/ syunnosukekaneko
/ @カネコシュンノスケ
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, amzn.to/2O6hFoC
1.27(inch) amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret polishing 3M sponge polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal polish is still Picard.
amzn.to/32Ip7f7
I like 3M masking tape, man. I recommend 6mm high frets on the guitar.
amzn.to/32H0gZ9
Dolmel 4000 Ruiter. Great torque, but hot! I can do a lot of things, so I'd like to be able to do 4,000 if I could.
amzn.to/2Kh3NH5
They have a new one called the 4300. If you can use the Stu-Mac base plate, this one might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
Plenty is good to have, orange English oil for the fretboard.
amzn.to/2Kh4G2n
This cross is tremendously good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#Fender
#Andy_bass_and_guitar
#Restoration
#Fender
#Andy_bass_and_guitar
#Restoration
15 окт 2024
